Satellite Pro A300 - how to get the sound on the TV with VGA cable?

Hello world

I have a real problem connecting my Satellite Pro A300 to my Samsung HDTV.
The video works fine - I used a VGA connection on the laptop and the TV.

The problem I have is healthy.
I want the sound either also come from the TV. I tried a jack of 3.5 m from the headphone jack of the laptop to a red and white connection RCA audio on the TV, but it doesn't seem to work.

Does anyone have any ideas or advice?
I need of additional drivers, etc., or do some settings need to be changed etc etc.

Hello

Normally, to use the 3.5 mm jack plug in the headphones, you need an adapter cable.
At one end, it has a 3.5 mm jack and the other side to connect red and white audio RCA connections.
Here is an example of what I mean:
http://www.optimization-world.com/IMG/prod/3_5_mm_rca_audio.jpg

I m using such an adapter without any problem. You n t need an additional driver, or something more. It's the same as if you were using a helmet. :)

Tags: Toshiba

Similar Questions

  • Satellite Pro A300: How to create the recovery disk

    Hello
    I just bought a Satellite Pro A300 with Windows XP.
    I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.
    The information gives instuctions on how to proceed for the Vista machines, but not for XP.

    I know that I can recover from the hidden partition, but where this is not possible, I wish I could get CD or DVD.
    There is a recovery CD included product that says only: "MS Windows XP" so I guess that it does not include drivers or Toshiba Software?

    Any help appreciated,
    Thank you
    Mick

    Hello

    You have preinstalled software Toshiba TOSHIBA Recovery Disc Creator?

    Please check this box.
    Using the TOSHIBA Recovery Disc Creator you can create the recovery disk.

    But if your laptop was already pre-installed with Windows XP and then a Recovery CD or DVD must be included.

    Have you checked all of the items in the box?

  • Satellite Pro A300 - how to access the installation of Vista hidden partition?

    AHOY!

    I have a Satellite Pro A300 PSAGDA 2000R

    It had Windows Vista installed when I got it, but after a while, had to reformat, so I did, (I want to reformat my computer every 6-12 months on average), it came only with XP disks even if he got a serial number for Vista on the underside of the laptop so I installed XP. That was about 2-3 reformats there now.

    However, so that finding drivers I've seen mention of a hidden partition to reinstall Vista (which I hope it is 64-bit) and tried to do this several times but unfortunately it does not work, I guess that maybe what XP installation I can accidentally deleted or something? (Thought they had in fact on some solid state memory which could not be written more or something.)

    * Is there a way I can access it, take another that won't cost a ridiculous amount (for example download) or a nice person enough to create an image to download on a site or something that I can download file sharing? *

    I have also a spare copy of Vista (and a bit of XP) on the drive, none of them will work?

    + Another thing which I am interested in is can I get any of the preview of Windows 8 OS that will run on this laptop? Apparently it improved performance on Vista and W7 would be convenient for running on a laptop, and I have also heard say it is possible to upgrade to the full version of the preview or W7 for a minimal cost and would probably be much cheaper than other methods if possible. +

    And I'm actually quite handy with computers, so don't be afraid to throw big words at me,

    (Tried the methods found on the manual on page 3-8 ([link: http://www.mytoshiba.com.au/support/computers/satellite/pro/a300/psagda-02000r/download?os=22]).)

    I have European A300 and I believe that the principle on the rest of the same models.
    A300 was offered with Vista preinstalled but without recovery disc Vista. Image that contains the operating system, drivers, tools and utilities for recovery has been saved on the HARD drive and with book factory owner was able to begin the installation of HARD drive recovery. It works with the factory only settings.

    With preinstalled Toshiba laptop recovery disk creator owners have been able to create the recovery disk that can be used if the disk HARD recovery doesn't work anymore.
    If you don t have access to this image saved on HARD drive recovery, you must use the recovery disc. If you don t have the disc that you have a problem. Recovery image can not be downloaded. All you can download are the unique rivers, tools and utilities that you can use if you install a clean version of the OS (operating system).
    On the European models, recovery image was recorded on the second partition of HARD drive in the folder called HDDrecovery.

    Anyway, A300 works with Win7 32 bit. I installed it on my machine and I m very happy with it.
    > Another thing which I am interested in is can I get any of the preview of Windows 8 OS that will run on this laptop?
    I put t know who should give you this overview, but the fact is that you get it from Toshiba. You should check if you can get it in another way.

  • Satellite Pro L300: How to get the sleep settings

    Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.

    But now, he's just on stand by.
    How can I get this back to how it was (having to press the button to exit stnd - in)-help!

    I tried to turn off Toshiba power saver and using the windows settings but nothing
    I have treid working :(

    Can anyone help?

    I get at the end of my home with this computer laptop blinkin :(

  • Satellite Pro A300: How to recover the Vista operating system

    My friend has a Toshiba Satellite Pro A300 it has a 4 GB of ram, but on Windows Xp shows only 3 GB
    I also want to put in place the back of the Vista, but I can't not insatall any operating system (only the Toshiba Xp dvd)
    (there is a HDD recovery folder on the C drive, I think it is the Vista that he owned before but a don't know how to install it)

    Ok. If the folder in HARD drive recovery then it should be possible to carry out a procedure for HARD drive recovery, remain on the second partition.

    First of all, start Notepad and press F8 immediately after that the laptop has been powered. Then choose the first option called fix my computer.
    A new window should open, and you should choose the last option called Toshiba HDD Recovery.
    Then follow the instructions on the screen.

    This should usually works if the folder of HARD disk recovery and partition has not changed or deleted.

    Check it out if it does not, you will need to order a Vista of Toshiba Recovery DVD:
    https://backupmedia.Toshiba.EU/landing.aspx

    Good bye

  • Satellite Pro A300 - how to install the webcam?

    I got my laptop via my uni so did amyn backup discs (especially not the webcam).

    Basically my laptop is a Trojan virus on my webcam, set it and I restarted my computer. It is then flashed up on reboot that I need to install my webcam but I don't have the disk and now I can't use my webcam! What should I do?

    PS I'm not a genius with computers so please be easy on me with the language.

    Hi mate,

    If you need to reinstall the driver for the webcam you can download on the Toshiba site and all drivers for your laptop:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    I have too many Satellite Pro A300 and it s not delivered with the Toshiba Recovery disk because you create such a floppy yourself. So start the Toshiba recovery disc creator, which is preinstalled on your laptop and you can create this disk. It contains a picture of the factory settings, and so you can restore the entire system every time.

  • Satellite Pro A100 - how to get the Wlan connection works

    Help!

    I'm a total beginner, and my problem is I can get a connection without wire only when I'm really close to my BT hub.
    My son has a laptop and gets a good connection anywhere in the House and even outside.

    He thinks I have a dodgy wireless adapter, this could be the problem?
    Can I fix it myself?

    Maybe download a new driver?
    Any suggestions would be much apreciated.

    TOSHIBA SATELLITE PRO A100

    Hello

    Your ad is not really useful.
    I mean that there is no detail about your problem
    You should first check if the laptop supports the wireless network card.
    This can be done in the Device Manager.

    Usually the WLan card must appear in Manager devices-> network adapters.
    If it s are not it is that the WLan card is not built in or the driver WLan is not installed. If the WLan driver is not installed then you should see yellow exclamation (or unknown device).

    But if the wireless network adapter is listed correctly then you should check if the WLan notebooks have been enabled. In order to activate the WLan you have to press FN + F8 and you put the switch on IT until the small LED flash.

    Finally, to configure the WiFi connection (right name WLan, encryption settings, etc...)

  • Satellite Pro P300 - how to get the original without media image?

    Hello

    I received a Satellite Pro P300 and there the for win xp recovery disk, I would go back to the installation of Vista pre installed if possible.

    The recovery on the hard disk partition is not available, so I guess, that it cannot be recovered. Is it possible to buy an original image?

    Liam is just that Win 7 is better than Vista OS.
    So if you have the ability to install Win 7 I recommend doing this instead of Vista.

    However, the Toshiba recovery disc contain only the Vista OS.

  • Satellite Pro A60 - how to get the recovery CD?

    Hello

    I have a Satellite A60 and my utils / driver disk is not in use.

    Is there anywhere I can download or there at - it somewhere that I can buy one?

    Especially the "FN" shortcut key will not work. I tried to download the utilities from the page drivers but its defo not to play ball.

    Any help on that would be great.

    ATB
    Steve

    Hello

    I found a new page of Toshiba.

    https://backupmedia.Toshiba.EU/landing.aspx

    It s an online store of Media Backup of Toshiba Europe and you should be able to order your CD of restoration on this page.

    _Regarding your FN order issue: _
    If you are using Win XP on your laptop, you must install the Hotkey utilities for display devices and Hotkey Utility get the FN buttons work.

    One thing is very important; If you install your operating system manually, please ensure you install drivers for Toshiba and utility in the right order. On the Toshiba driver page, you can find the installation instruction txt file and you would find the mentioned order insall. Follow this all in the driver installation procedure!

    Good bye

  • I lost Windows Vista on Satellite Pro U400 - how to get the original configuration

    All;

    I missed upwards at the start of my new laptop... I fail to use Vista.
    So I used the system recovery DVD. a version of Xp installation crashed the Vista partition!

    How can I get the original installation of this machine...?

    Any help is welcome...

    Kind regards...

    Hello

    Try with https://backupmedia.toshiba.eu/landing.aspx

    Good bye

  • Satellite Pro 460CDX: how to get the BIOS to recognize the disk external drive port?

    How do you get the BIOS to recognize external floppy port?

    HEEE? ?:|
    Are you sure you know how to update the BIOS?

    Come on cheshire! The update of the BIOS is risky If you n t know how to do!
    Usually, you don't need additional software to recognize the USB FDD drive or driver!

    I hope you have downloaded the good BIOS and use the correct procedure to update BOS, because if you do this in the wrong way to damage the motherboard!
    It is important to first read the BIOS update guide lines! You can find it on the download page of the BIOS under more information

  • Re: Satellite Pro C660 - how to do the recovery with command prompt disc?

    I have a brand new Pro C660 of Satellite. It worked fine for a day, now it will not load windows. I don't have to create the recovery disks, as I only had a few hours (Yes, Yes, I know, should have been the first thing I did). All data are present (but backed up just in case USB) and I can see the folder HDDREcovery with all data intact. However, I can't run the application to create recovery discs. Does anyone know how to extract the images and create the media using only the command line? (I can go into command prompt by booting from the Windows 7 disc a friend). All options fail own laptop startup disks. It says 'Windows does not load' and I try startup repair, but it detects no error. Any help/thoughts on this will be greatly appreciated!

    Hey,.

    It of not possible to create the drive with command prompt recovery. You must use the Windows Toshiba Recovery Media Creator.

    Now it s too late for you, but you can order a disc here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Satellite Pro L - how to get the 2 GB RAM recognized?

    Hi all, I'm new to the forum and I cannot get my laptop to recognize kingston DDR2 2x1GB two identical cards.

    I first had 512 MB card and replaced, which, with the cards Go too 1 booted up and system show only 896 MB so asumed 1 card was defective. 1 remove maps and 1 left in the slot in the bottom, rebooted and still 896 MB, rearranged 1 with the other card 1 GB and initialized and same 896 MB or something. If the two cards into the lower slot but not work together so I thought then perhaps the top slot was not working.
    I tried both cards 1 GB by themselves in the top housing and both show 896 MB.

    So I then tried the original 512 MB with 1 the1GB cards and weak a system here is reading 1.37 g of ram. My question is how can I get both the Rams from 1 GB to start working so bed 2 GB system?

    Hey Buddy,

    Before you start a lengthy discussion, you should post which model of laptop, you use. Maximum use of RAM depends on the motherboard, chipset and BIOS.

    But now that it sounds like that the modules are not compatible to your laptop.

  • Satellite Pro A300 - How can I turn on my webcam?

    Satellite Pro A300 - How can I turn on my webcam? Operating windows 7. The computer is clean.

    Hello

    The webcam can be used with programs like Skype communication where you can make a video call. Of course, there are other messengers or programs they use the webcam.

    But you must install the software/driver webcam that you can use. This software can be downloaded from the official website of Toshiba (Camera Assistant Software):
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  • Satellite Pro A300 freezes when on the internet

    Satellite Pro A300 freezes when on the internet & the only way to turn it off is to take out the battery. Bought new Dec 2010 & is under warranty - suggestions?

    Hello

    have you tried to update drivers Lan (wlan)? What browser do you use? I guess, the Internet explorer, try firefox or opera. Also, your computer may be infected with the virus, or blocked by the firewall. Have you installed software before it starts? Is this ok when you bought it? I ask you too, because you do not have a lot of information.
    It is especially the driver, software problem.

Maybe you are looking for

  • Question about Vista performance on satellite Pro M70

    I was wondering if anyone knew a lot about the performance of vista. For example, if you run a game under vista it run worse than in Xp because the operating system uses more than the power of the computer?

  • HP audio folio and light meters

    When I arrived the Folio (13-1020us), brightness and audio meter was displayed when I pressed on the keyboard.  After uninstalling hp * cough * bloatware * cough * software it is not displayed in meter.  I was wondering what software I have to reinst

  • How to reset my winsock provider catalog

    Hi when I open internet explore the page does not open. I'm doing a diagnostic connection, it is said that my the winsock provider catalog must be reset and the system must be restart

  • Server wait times 2012 - Win 7 - DNS Client

    Background: Single Server R2 of 2012: Domain controller: * field (192.168.0.12) Primary DNS Active Directory integrated, double cards configured network team Clients Windows 7 Pro: Quantity 15 (with an assigned static IP, no DHCP, all cables, wireles

  • 'low memory - close applications' error messages

    I have 8 GB of RAM and that you have not added all the apps on my work habits, but very recently, I get 'not enough memory - close applications' error messages.  It seems that something is using a lot of RAM.  How can I fix it?