Satellite Pro A300 - USB laptop monitor noise

Similar Questions

• How to connect by Satellite Pro A300-1LW to TV - only monitors VGA port available

  I want to connect my Satellite Pro A300 1LW to the TV to watch DVDs and videos on the internet.
  There is only a single VGA output.

  I have this connected to the input VGA on TV (Sony Bravia LCD TV) and it displays the start-up screens such as the BIOS, Windows startup screen password but fails when the user login screen.

  The television then shows a message indicating "signal not supported.
  Adjust the PC output '.

  Is the complete list of available interfaces:

  1 x DC-in
  1 x external monitor (this is the port that I use)
  1 x RJ-11
  1 x RJ-45
  1 x i.Link (IEEE 1394)®
  1 x external microphone
  1 headphone (stereo)
  1 x SP/DIF (optical) shared with headphone jack
  1 x 5-in-1 Bridge Media slot (supports SD ^ TM ^ memory cards up to 16 GB)
  Stick® up to 256 MB, Memory Stick Pro ^ TM ^ up to 2 GB, MultiMedia Card ^ TM ^ to the top
  to 2 GB and xD-Picture Card ^ TM ^ up to 2 GB)
  1 (shared with a USB port) x eSATA
  4 (2 left, 2 right) x USB 2.0 (USB Sleep-and-Charge of support)

  Have you tested when laptop is not connected and that Vista is fully charged?
  I mean start your laptop and wait for Vista to be fully charged. Cannot connect to the TV, then use the FN + F5 key combination to have the image on the TV.

  It works correctly?

• On Satellite Pro A300-13Y USB port problem

  I have a Satellite Pro A300-13Y with 4 USB ports. The USB ports of two right don t work. I bought this phone recently (2-3 weeks ago). It has a Windows Vista Business SP1 on it. I put chip in utility installed on it, I checked the Device Manager and tried to find driver for it but I couldn't solve this problem.

  So I called Toshiba service dek, they say that I need to install new standard to factory install to see if it can be solved. But I don t find it the best way and I have some applications installed on it and get some info on my laptop, so I would find another way to solve this problem.

  Also, I think it might be a hardware problem. Can someone show the way in which I can find or fix this? I can also send it to guarantee, but I made a mistake and if there is not a hardware problem that I have to pay for it.

  Hello

  I know it s not the best way, but it's the only way to exclude a hardware failure. If after a recovery of the won´t of USB ports not work then you can send it to repair without being in doubt that they will charge you for the repair.

  Welcome them

• Satellite Pro A300 can not find USB devices

  Hello forum,.

  We have a customer who bought a Toshiba Satellite Pro A300 with us, but he gets a strange mistake about it.
  It connects to a hub 5port Sandberg USB 2.0 to one of the usb ports, the pc detects the hub, but when it connects a /Memory stick to the hub, nothing happens.
  the hub and the memory stick works on other PCs.

  I hope someone can help.

  Best regards

  John Bork
  DANBIT A/S

  Hello

  What happens if you connect the memory stick directly without this USB hub?
  I also had a USB hub, but these hubs are a little complicated and delicate USB specification allows a certain power and according to the devices that connect, you need to use an active USB hub, that means with external power supply.

  But normally, Satellite Pro A300 should have enough USB ports if it of needed, I would recommend a USB hub with 2 or 3 maximum ports

• Satellite Pro A300: Win 7 Upgrade DVD does not list my laptop model

  I bought a Satellite Pro A300 that came with Windows Vista pre-installed on it. I was offered a Windows 7 Uprgrade for 30 by Toshiba that I bought and got 2 discs:

  (1) Windows 7 Upgrade disc
  (2) Toshiba Win7 Drivers Upgrade drive

  I have updated successfully however the drivers Toshiba disk does not list my model of laptop. I tried to install the drivers on the disk for the OEM software such as drivers of web cam (which are not available online), but they do not work. Also now my DVD player does not open and I can't view the contents of the disc?

  Can someone advise who I come into contact with to get a drive for my laptop model?

  Hello

  What model of laptop do you have?

  Have you tried to choose another model instead of your laptop model?
  Do this!

  I read about a similar question here in the forum and the user could solve this choose another laptop model number.

  By the way; all Win7 drivers can be downloaded from the page of European driver from Toshiba:
  http://EU.computers.Toshiba-Europe.com

  See you soon

• Unable to use webcam on satellite Pro A300

  Hello
  I have Toshiba Satellite Pro A300-PSAGDE, I have problem with the camera, I can't open or find him, when I open it I got a massage said

  "Webcam is either disabled or has failed." Please check your webcam settings '.

  I installed the new software for camera driver but still the same problem, it was working perfectly before

  I also got notice this strange unknown device, when I update it says "the best software for your installed isallready device.

  I have windows 7 SP1 X 86

  I have attached photos to strange unknown device, also you can AVI there is no material of the webcam!

  [Fig 1 | http://www2.0zz0.com/2014/09/21/20/282963601.jpg]

  [photo 2 | http://www2.0zz0.com/2014/09/21/20/532459967.jpg]

  [photo 3 | http://www2.0zz0.com/2014/09/21/20/209784268.jpg]

  I'm wondring if it's related to camera problems.

  Help me please thank you

  The unknown device is bound to the controller USB (USB\VID_0000)
  Webcam module is connected to the USB controller.
  That's why I'm quite sure that this unknown device is internal webcam m

  I recommend you remove the unknown device from the list of devices (mark and press DELETE)
  Then clean the registry with freeware CCLeaner tool.
  After this reboot of the laptop.
  Download webcam for Win 7 software and launch the installation.

  In case its just software problem of workaround should solve your problem

• New HARD drive installed Vista 32 bit, but need drivers for Satellite Pro A300-1MC

  "Because my recovery disks that I made 3 years ago does not, I just installed Vista 32 bit and then on the Toshiba site, where I have downloaded all the drivers available for my laptop (a Satellite Pro A300-1MC) on a USB key (that I don't have a driver to connect to broadband on my laptop) and when I tried to open on my laptop a message comes up saying" Please insert the last disk of all selfextracting and click OK to continue. "

  So what I do now?
  Thank you

  Sounds like you have enabled autoplay
  Whenever you insert the memory key USB flash it will try and read the contents of the files on it.
  You can disable this by holding SHIFT when you insert the USB key.
  This should disable the AutoPlay option.
  Then you can go to MY computer in order to access the USB key.

  Note: pilots are zipped so you will need to decompress the content first, I installed a 3rd third party tool called WinRAR to unpack the packages unique.

• Satellite Pro A300-28V - black screen boot failure

  My three days old Satellite Pro A300 began yesterday to hang at startup in Vista. I rebooted twice with good result, but now I see only the home Toshiba screen, then it goes black with a cursor top left. I won't answer on /F12/ F8 F2 or the recovery of the DVD. Indicator LED disc is black, fan-only sound. I have connected not no matter what external monitor ever on this one.

  At the moment so it's Sunday I chose the battery and will try again in an hour or two, otherwise I contact seller tomorrow. Any ideas what's happening? BIOS crash, hard drive (after three days)?
  / disappointed

  Hello

  Does this mean that you can t access the BIOS too?

  If it s, then it seems to be a hardware problem. Therefore, the service provider authorized in your country. They can help you to repair the laptop.

• Satellite Pro A300-257 while flashing the BIOS

  Hello

  I have a dilemma. I recently installed windows 7 on my laptop of girlfriends who is a Toshiba Satellite Pro A300-257, everything went well until I tried to update the Bios. I followed all instructions on the toshiba site had to put the model number in to get good bios double checked and triple checked before running the program, but when I ran the system crashed to halfway through the closed system update and now it wont even boot lights are on cd player is ROAR a few stays on black screen.

  I read many forums and it seems im not the only one with this problem.
  I just got the phone to toshiba and they say im not covered because I does not you can call and go through it with them on the phone, even if at no time did he tell me to do that I followed the instructions of there Web site.
  I also confirmed with them that I used the correct bios but they say that they are unable to prove that and I can put in the wrong information that I did not.

  In my view, there is a program that will allow me to boot from the cd so I don't have to go out and buy a reader external floppy to Flash the bios, I think that his winflash. Unfortunately, all I can find is the executable program on there website which im guessing will not start work.
  Anyone know where I can find the prog to update the bios and the bios file so I can create a cd bootable to Flash the bios.

  Any help will be appreciated with gratitude

  Thank you very much

  Hi mate

  I m afraid there is no alternative to reflash the BIOS to the traditional version of BIOS who can start the BIOS updated using an external USB drive and the floppy disk.

  The European driver Toshiba page contains only the BIOS Win-based that can be updated when the windows operating system. The traditional BIOS is not available for download. Only authorized service partners have access to this version of BIOS and that's why I don t see any alternative as to get in touch with the guys and to ask for help.

• Satellite Pro A300-28R - shows horizontal stripes

  My Toshiba Satellite Pro A300 sometimes displays horizontal stripes making the text unreadable images before portable crushes and I have to restart. Occurs usually when I'm on the internet. Does anyone know why this happens and how to solve?
  Once I rang Toshiba UK Technical Support and a rather impatient adviser said it was a discharge of static electricity problem, but why is it not with my laptop Pavilion?

  My Toshiba Satellite Pro A300 is less than one year, but the problem occurred repeatedly. I also had to replace the power adapter already because of the cable being too steep to the piece of cylindrical shape next to the Jack. Is this all I know a question of production with this series of laptops?

  > My Toshiba Satellite Pro A300 sometimes displays horizontal stripes making the text unreadable images before portable crushes and I have to restart. Occurs usually when I'm on the internet. Does anyone know why this happens and how to solve?

  These symptoms of display can be connected to a screen, graphics card driver or the graphics chip.
  First of all, you should try to update the graphics driver and should check it again.
  Secondly if this problem would appear then you must connect an external monitor to the laptop to check if the same would be visible on the external display.
  If so, the problem could be related to the graphics chip.

  It would be the worst case, a graphics chip cannot be replaced, but the whole mobo must be replaced in order to solve such a problem.

• Satellite Pro A300-28R - Windows startup with a wrong display resolution

  OK so I have a Toshiba Satellite Pro A300-28R with Windows 7 64 bit and an ATI Mobility Radeon HD 3470 graphics card.

  Recently, I have connected my laptop to a TV using the S-video connection. It worked well. The problem is that since then, and every time I start my laptop Windows starts with S-video of 600 x 800 display resolution.

  I tried changing the settings in the Panel and using the ATI CCC, having once selected and applied these settings, but whenever Windows starts now it starts with the above display resolution.

  As a result, I've also uninstalled and reinstalled my display driver both package Toshiba value added but the same problem persists. I searched with Google about this problem and have not been able to find something useful.

  Any help would be greatly appreciated.

  Hi dude

  How did you produce the video signal?
  Did you choose Office expanded or all simply the option external monitor by using the FN + F5?

  I think that you need to press once more the Fn + F5 and should switch to a view, internal laptop display.

  Please check if this could help you!

• Satellite Pro A300-15V - Question on Toshiba startup items

  Hello everyone!

  I need help in the Organization of my startup list:

  (Why should Toshiba button support I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
  ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
  Agent of filtering of Audio Conexant high definition (what is this program? Do I really need to start?)
  TOSHIBA Power Saver
  Toshiba Flash Cards
  RAID event monitor

  So, my friends. Could you give a valuable suggestion whether or not it is prudent to disable startup above entries? I want to speed up my laptop at the highest possible level.

  Thanks a lot for your time!

  Kind regards
  Osman.

  My laptop:
  Toshiba Satellite Pro A300-15V (PSAJ5E) => NOT have multimedia keys except the FN keys.

  Hi Osman,

  Akuma wrote, all processes are needed, such as Conexant sound, Support Button and Flash cards for FN keys and illumination.

  Don t do worry about these programs, everything is ok and that they are necessary for your laptop.

  If you want to improve performance, disable other programs you don't need and defragment your HARD drive at any time.

• How to restore my Satellite Pro A300?

  I had to replace the hard drive on my laptop Satellite Pro A300. Before that, I did a complete backup of computer with Windows complete PC Backup. Now I want to restore all of the backup computer, but I have this problem:
  When the computer restarts I press F8 and select Repair my computer, and in the System Recovery Options, I click on the Windows complete PC Restore. Then, the window for the selection of available backups. When I click on the next button, I get the following message:
  «To restore your computer, Windows needs to format the drive running Windows recovery environment on.» Start your computer from a Windows or a recovery disc install disc to try again".

  I don't have a Windows installation disc. When I start my computer from the key to the rescue disk, and then press F8 in boot option advanced, I don't see you option to fix my computer.

  How to restore my computer anyone know?

  I don't know what is really happening in your computer, but it is a little difficult to restore without Windows installation disc. On another computer, you can download and install Acronis true image and activate it. Acronis, there is an option, the backup copy of Windows convert to Acronis backup. Convert you. Then, create a rescue bootable Acronis Disk support. Converted Acronis backup, you can place them on dvd disc discs or burn flash usb. Insert, Acronos boot media, navigate to the backup and restore. \

  It's a bit difficult to explain everything, but in your case, it is best to get copy of windows and do a clean install

• Satellite Pro A300-15V, I need help in the Organization of my startup list

  Hello everyone!

  I need help in the Organization of my startup list:

  (Why should Toshiba button support I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
  ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
  Agent of filtering of Audio Conexant high definition (what is this program? Do I really need to start?)
  TOSHIBA Power Saver
  Toshiba Flash Cards
  RAID event monitor

  So, my friends. Could you give a valuable suggestion whether or not it is prudent to disable startup above entries? I want to speed up my laptop at the highest possible level.

  Thanks a lot for your time!

  Kind regards
  Osman.

  My laptop:

  Toshiba Satellite Pro A300-15V (PSAJ5E) => NOT have multimedia keys except the FN keys.

  > Toshiba Button support (why should I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
  You can disable it. If your mobile phone does not support the multimedia buttons then this tool is useless.

  > ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
  I don't know what would make this process, but you can disable this in msconfig-> tab start Mr. If it would take in the future, then you could turn it on again.

  > Agent of filtering the Conexant high definition Audio (what is this program? Do I really need to start?)
  I think that this is necessary. It could improve your audio

  > Toshiba Power Saver
  This is important. It s an additional saving of Toshiba option for Win 7

  > Toshiba Flash Cards
  This tool controls the FN keys.

  > RAID Event Monitor
  Hmm so you don t have two hard disks, then you can try to disable it too.

• Satellite Pro A300 sleep and extended functions does not properly

  I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I find this problem:

  Sometimes (not always: maybe it depends on which program is running) in trying to put the computer to sleep or into hibernation, it does not stop, but only stop the monitor (Panel), while the fan goes on and the power light is green. Of course, a lot of energy consumption of battery!

  Then there is no other way to take off the computer by pressing the power button for a long time... but this is not correct!
  NB: my computer is always connected to a local network, and generally there are some browser windows open when I put it in stand-by mode.

  How can I fix?
  jomurray

  You must update the BIOS and must always close the programs and applications that ruin on the laptop before activating the standby mode or hibernation would be.

  I found this solution in this forum, and according to some people here it has solved similar problems