Satellite Pro A300 - Wi - Fi connectivity limited after sleep mod

Similar Questions

• Re: Satellite Pro A300-1EA - wireless connection, drop all the time

  Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.

  It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.

  There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.

  I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 12.2.0.11.3 drivers from the Toshiba download page.

  Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.

  Laptop will be thrown against a wall soon if no one can help you.

  Thanks in advance.

  Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.

  Post edited by: mjbcrawf

  Hello

  Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.

  In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].

  If you have any other questions, please let us know!

• Satellite Pro A300-1DZ cannot find HDD after BIOS update

  Hello world

  I recently bought a Satellite Pro A300-1DZ flea market.
  Put a new copy of Windows xp family.
  I then install all the drivers necessary own site of Toshiba and the end of it, I thought that it is perhaps a good idea to update the bios?

  OH DEAR what a big mistake.

  Now the netbook won't start windows.
  So I thought it's ok, I'll just start from the begginning and reinstall windows again, but he tells me that it cannot find a hard drive on my netbook?

  aaaaaaaaaaaaaaahhhhhhhhhhhhhhh, I'm going crazy,
  Could someone tell me please how to fix this? Thanks x

  Hello

  I think the value of the option SATA AHCI and hence Windows XP mode cannot find the HARD drive.
  It's because of the SATA controller.
  You can set the SATA AHCI compatible mode mode mode and this will allow you to install Win XP on the laptop without the use of SATA drivers.

  So, you have two options if you want to install Win XP:

  -> AHCI mode, but you must include the SATA drivers
  Compatible mode-> Win XP installation possible without SATA drivers

• Satellite Pro L650 doesn't get often from sleep mode

  Hi, I have a Satellite Pro L650, model No.: PSK1KA-00Y01E running Windows 7 64 bit.
  This laptop does not pick up often after mode "Eve".

  Can anyone offer suggestions on how to fix this?

  What's happening:
  When the computer sleeps, either by pressing the sleep button, or by closing the lid, this seems to work very well.
  After a minute or 2, I try to get the computer goes through the lid opening, or by pressing the power button. Sometimes, it works correctly.

  Most of the time the lights white led at the front displays for a few seconds and then started. Then, press us the power button and, often, the computer starts and says that Windows has been shut down incorrectly and then completely restarts for a new session.

  Sometimes the computer does not start, and it must cut off the power, then press the power button, which then crosses a full restart of the computer for a new session.

  A few weeks ago, we installed the latest version of the bios (2.20), and the problem persists.
  Is it a driver problem or a hardware problem?
  If it is a driver problem, what drivers should I try to install?

  Thank you
  Graham

  Hello

  > After a minute or 2, I try to get the computer goes through the lid opening, or by pressing the power button. Sometimes, it works correctly.
  This means that this problem is not always, but sometimes only and it of not possible to replicate this.
  In this case is not easy to find a good solution for this

  > We have installed the latest version of the bios (2.20) a few weeks ago, and the problem persists.
  > Is it a driver problem or a hardware problem?
  In my opinion, it could be a software problem. I mean that the problem could be related to corrupt the OS Win. Maybe the registry is confused upward. Usually, if the laptop is in hibernation / sleep mode, by pressing power button should the reactivation of the system in this mode and not shut down the laptop.
  So maybe this is s question OS

  If I understand your message, you have just updated the BIOS but didn't try the recovery procedure. Well well, for checking if the problem hardware or software s, you should get the phone to the factory settings.

• Satellite Pro A300 - the LAN connection icon disappeared

  Can anyone help?
  My computer went funny last night and a message popped up saying LAN cable disconnected while I use it wireless.
  Its happened before and I went into something where I had to check the LAN option and everything came back new.

  Anyone has any suggestions please?

  Thank you very much.

  Hi sue030_3,

  LAN card still not correctly shown in device without yellow exclamation Manager?
  What operating system you are using?

  Maybe it help if you reinstall the the official website of Toshiba LAN driver:
  http://EU.computers.Toshiba-Europe.com

  Check this box!

• Satellite Pro A300 / PSAJ1E - 01000XEN won't turn on

  I have a new laptop, Toshiba Satellite Pro A300 / PSAJ1E - 01000XEN.

  After I opened the box and put it on my desk, I connect to the AC adapter and after that I tried to turn on the laptop but there is no response.

  I removed the battery and pressed the button (to remove the static). I then plugged in the power adapter and properly turned on the laptop (with no battery).
  If I stop the machine, the laptop won't turn on with the battery and the AC adapter. I have to remove the battery so that the laptop turn on.

  I think the problem is the battery or maybe the BIOS... I await your comments on this topic...

  Concerning

  Hello

  What seems to be something wrong with your laptop.
  But please don t ask me what exactly wrong s or what part malfunctions.
  Without any control it s simply not possible to provide the final diagnosis.

  As you say, the machine is new.
  Why you n t contact your dealer and ask for replacement?
  Maybe you could get a new one?

  However, you can contact the ASP in your country for a detailed notebook check.

  PS; Your warranty is valid if you have no fees

• Satellite Pro A300-15 t does not restart on the current after BIOS update

  Hello

  There is something wrong with my Satellite Pro A300-15 t. I made an update of the BIOS of toshiba recently with the latest Web site and it installed successfully. But after the installation, I noticed that my laptop does not restart when it is connected to the power adapter. It restarts and works perfectly when its power on the battery.

  After restart or start-up the laptop (on battery), it will be well when the adapter is connected.

  But, when I reboot when the adapter is connected, after his stop, just power light turns on for a second or two and gets off automatically. And not even the laptop starts manually by pressing the power button (LCD is turned off when the power light comes on for 2 seconds) when the adapter remains connected.

  So what I do is to pull the plug on the adapter, then start the computer manually by pressing the power button and reconnect the plug of the adapter to the laptop starts. It works well this way. Rest everything works perfectly.

  And this problem started after the update of the BIOS. Now, I don't know how to remedy the situation I don't know if there was a bug in the last update of the bios.

  Details of the update from: http://gulf.computers.toshiba-europe.com/innovation/download_bios.jsp?service=AE

  30/07/08
  Update the BIOS
  This Bios update adds functionality to your system.
  Satellite Pro A300 Toshiba of 3, 60 - WIN

  So please help me to solve the problem.

  Thank you best regards &,.
  Manjit M.

  Hello

  Try to update the BIOS again
  In addition, access the BIOS settings and set the default parameters. Save it and try again.

  Good bye

• Satellite Pro A300 - touchpad failed after BIOS update

  After that good BIOS update 2.00 to 2.10 / suggest by ALERT TEMPRO - http://support1.toshiba-tro.de/tedd-files2/0/bios-20091125132031.zip/ the touchpad of my Satellite Pro A300 - GR 1 stopped working.
  He appears under the name hidden in Device Manager. The State of the device - "this device is not present, is not working properly or is not all its drivers installed." (Code 24) "reinstall the driver has no effect of course. I can also access the BIOS utility when you start pressing F2.
  Running Vista Business 32-bit Edition.
  Ideas to solve the problem will be highly appreciated!

  Hello

  Normally, it should be possible access the BIOS, if you press F2, once you have turned on the laptop. Please check again and load the default settings there.
  And you cannot access the BIOS if you shut down the computer.

  You can use an external mouse on the laptop? Please check this too.

  I've also updated the BIOS on my Satellite A300 but I n t have a problem with the touchpad after the update.

• Behavior of cooling after only the BIOS Flash - Satellite Pro A300

  Hello everyone,

  I have two laptop computers, Satellite Pro A300 Satellite A300. Both have the same configuration, C2D E8300 2 GB, ATI 3650 512 MB and so on...

  Today I flashed BIOS to the latest version (from V3.90 to V4.20) on both of them. Version 3.90 cooling was OK, fan worked only when it was necessary. But now after that flashing the BIOS fan runs constantly, he does not stop.

  What I did in Vista under Toshiba Power Saver Power Options, I changed the cooling method of maximum Performance to optimised battery, reverse cooling operation, but coverage (keyboard area) has become a bit warmer.

  My question is, what is the problem with cooling in the new version (v4.20)? And how to fix this?
  Yet once again, the problem did not exist before flashing the BIOS and the problem is on both computers.

  Thank you very much for your help!

  Best regards
  Osman

  > What I did in Vista under Toshiba Power Saver Power Options, I changed the cooling method of maximum Performance to optimised battery, reverse cooling operation, but coverage (keyboard area) has become a bit warmer.

  I doubt that there could be something wrong, I want to say that you said that after changing the method in cooling Toshiba Power Saver, the fans don't run all the time
  Usually the cooling modules are controlled by energy savings and the BIOS contains only the table fan.

  Keyboard of my laptop or on the left side of the laptop becomes too hot because on this side, you find the cooling modules that blow hot air

  Nothing so unusual...

• Satellite Pro A300: Bluetooth headphones sound decreases when it is connected

  Hello

  I have a pair of headphones Creative SE2300 Bluetooth that I use with my Satellite Pro A300 and its built-in bluetooth.

  They connect well and work as they should (including the A2DP and AVRCP) except that the sound cuts every 20 seconds or more for anything from a fraction of a second for a couple. Abandonment of sound is completely intermittent no apparent reason for it.

  Now earphones Creative also came with a transmitter to connect to any helmet and the connection to it works perfectly with no decline in the sound. I also connected the earphones to my phone and it used to listen to music, and once again the connection is flawless.

  So why the connection to my laptop is so bad?

  I have improved the battery Bluetooth to the last v7.00.16 (T) and my headphones are fully charged.

  Any help will be very appreciated!

  You have any other Bluetooth connections configured for example data synchronization?

• Satellite Pro A300 - the cursor moves continuously when connected an external mouse

  Hello

  I have a Satellite Pro A300. When I connect a mouse directly by USB the cursor moves constantly. I also have a mouse attached via a docking station, Toshiba and that works perfectly.

  It doesn't matter what USB port I use or if the laptop is connected to the docking station or not, or if it works on AC or on battery power.

  I thought it was the mouse that was the problem, so I went and bought a new one but the problem persists.

  Actually, while I wrote this post, he has stopped doing that and then started! Very frustrating.

  Can anyone help?

  Thank you

  Susib

  Hello

  How about, the touchpad is the slider moves and jumps using the touchpad?
  Try to disable the touchpad while using the USB mouse control if you can notice a difference

  What about BIOS?
  You have the latest version installed?
  Check it!

• How to connect by Satellite Pro A300-1LW to TV - only monitors VGA port available

  I want to connect my Satellite Pro A300 1LW to the TV to watch DVDs and videos on the internet.
  There is only a single VGA output.

  I have this connected to the input VGA on TV (Sony Bravia LCD TV) and it displays the start-up screens such as the BIOS, Windows startup screen password but fails when the user login screen.

  The television then shows a message indicating "signal not supported.
  Adjust the PC output '.

  Is the complete list of available interfaces:

  1 x DC-in
  1 x external monitor (this is the port that I use)
  1 x RJ-11
  1 x RJ-45
  1 x i.Link (IEEE 1394)®
  1 x external microphone
  1 headphone (stereo)
  1 x SP/DIF (optical) shared with headphone jack
  1 x 5-in-1 Bridge Media slot (supports SD ^ TM ^ memory cards up to 16 GB)
  Stick® up to 256 MB, Memory Stick Pro ^ TM ^ up to 2 GB, MultiMedia Card ^ TM ^ to the top
  to 2 GB and xD-Picture Card ^ TM ^ up to 2 GB)
  1 (shared with a USB port) x eSATA
  4 (2 left, 2 right) x USB 2.0 (USB Sleep-and-Charge of support)

  Have you tested when laptop is not connected and that Vista is fully charged?
  I mean start your laptop and wait for Vista to be fully charged. Cannot connect to the TV, then use the FN + F5 key combination to have the image on the TV.

  It works correctly?

• Satellite Pro A300 - cursor is random if the power is connected

  I have a Toshiba Satellite Pro A300 running Vista Business and my synaptic touchpad cursor started becoming erratic and cannot be controlled normally.

  It is hard to move and it will open programs and the internet, etc. This happens every time power outlet is plugged but normally works on battery. I ran Malwarebytes and AVG 8 scans, but they come without any problem. I restarted mode safe (after a forced closed down) and the problem has always existed.

  Can someone throw some advice on this problem?

  Strange. I never heard a question also and now I can t say what is the reason for this, but I hope that I can help you identify the reason.

  It would be interesting to know if you have the same problem with an external mouse. You can check this please?
  You use the original from Toshiba AC adapter or another?

  Perhaps the problem can be solved if you update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• Satellite Pro A300 - after sleep mode the mouse no longer works

  Hi all

  Hope you can help me with this problem because I believe that I have tried everything I know and my next step is really formatting all the computer again and again without knowing if it will work this time, because that's what I just did, during the upgrade to win 7.

  I have 2 problems:

  When the computer goes into sleep mode and I start it backup - the mouse stops working, unless I have move to another usb port. I get a message on usb can run faster...

  Another problem is a program of freezing at this point as well, this program is Oracle JDeveloper, don't know if that has to do any?

  I tried to update ALL the drivers of toshibas webpage - these problems still...

  Help, please!

  Would rather not format again...!

  Christian

  Hello

  Can you please tell us which version of Windows 7, you have installed? I mean if you have 32-bit or 64-bit.

  Is it just that you use an external mouse?
  The touchpad works after sleep mode? If so I think that it s something wrong with the external mouse maybe.

  By the way: make sure that you use the latest version of the BIOS. You can find it on the page of Toshiba.

  And as for the question of the Oracle, I think you should communicate directly with Oracle support. ;)

• Unable to use webcam on satellite Pro A300

  Hello
  I have Toshiba Satellite Pro A300-PSAGDE, I have problem with the camera, I can't open or find him, when I open it I got a massage said

  "Webcam is either disabled or has failed." Please check your webcam settings '.

  I installed the new software for camera driver but still the same problem, it was working perfectly before

  I also got notice this strange unknown device, when I update it says "the best software for your installed isallready device.

  I have windows 7 SP1 X 86

  I have attached photos to strange unknown device, also you can AVI there is no material of the webcam!

  [Fig 1 | http://www2.0zz0.com/2014/09/21/20/282963601.jpg]

  [photo 2 | http://www2.0zz0.com/2014/09/21/20/532459967.jpg]

  [photo 3 | http://www2.0zz0.com/2014/09/21/20/209784268.jpg]

  I'm wondring if it's related to camera problems.

  Help me please thank you

  The unknown device is bound to the controller USB (USB\VID_0000)
  Webcam module is connected to the USB controller.
  That's why I'm quite sure that this unknown device is internal webcam m

  I recommend you remove the unknown device from the list of devices (mark and press DELETE)
  Then clean the registry with freeware CCLeaner tool.
  After this reboot of the laptop.
  Download webcam for Win 7 software and launch the installation.

  In case its just software problem of workaround should solve your problem