Satellite Pro A300 Wireless resumed after sleep mode problem

Similar Questions

• Satellite Pro A300 - touchpad failed after BIOS update

  After that good BIOS update 2.00 to 2.10 / suggest by ALERT TEMPRO - http://support1.toshiba-tro.de/tedd-files2/0/bios-20091125132031.zip/ the touchpad of my Satellite Pro A300 - GR 1 stopped working.
  He appears under the name hidden in Device Manager. The State of the device - "this device is not present, is not working properly or is not all its drivers installed." (Code 24) "reinstall the driver has no effect of course. I can also access the BIOS utility when you start pressing F2.
  Running Vista Business 32-bit Edition.
  Ideas to solve the problem will be highly appreciated!

  Hello

  Normally, it should be possible access the BIOS, if you press F2, once you have turned on the laptop. Please check again and load the default settings there.
  And you cannot access the BIOS if you shut down the computer.

  You can use an external mouse on the laptop? Please check this too.

  I've also updated the BIOS on my Satellite A300 but I n t have a problem with the touchpad after the update.

• Satellite Pro A300 Wireless questions

  My 3 month old A300 Satellite Pro (Vista) disconnects every half hour from my wireless hub. To reconnect, I have to disable the wireless on the laptop and turn it on again then it reconnects.

  My partners that Dell remains connected all day, so it may not be a problem with the wireless network.

  Anyone has any ideas what would cause this. It runs on AC power.

  Is there a difference between yours and partners for laptop?
  Have both the same OS?
  That the two laptops use the same standard WLAN (a/b/g or n maybe)?
  You can test the WLAN connectivity with g only?

• Satellite L670 - screen remains black after sleep mode

  I recently bought a L670. When I close the laptop, it goes into sleep mode. No problem with that. But when I opened the laptop again the screen remains black.
  I see on the drive activity light that the laptop come out of sleep mode correctly, but the screen remains black.

  I don't have this problem when the sleep mode is only a few minutes. Then the screen comes up correctly.
  But for example after an hour of sleep mode... no screen.

  I'm doing something wrong?

  Thanks in advance for your feedback.

  Hello

  I recommend the update to the BIOS and the display driver.
  It helped to solve a similar problem on my old laptop.
  Maybe it helps in your case.

  Good luck

• Satellite Pro P100 - multiple display after Exchange screen problem

  My laptop: Toshiba Satellite Pro PSPA6A-028017 with Nvidia GeForce Go 7900GS

  OK, here's the story. I turned on my laptop about a week ago and the screen is blank. I plugged in a monitor external via AVI and tried Fn + F5, but nothing. When the computer reboots, the external screen worked. When I tried to turn on/off displays the external monitor is turned off and I found myself with an empty screen - I was obviously spent on screen of the laptop but working blind, I couldn't work out how to get the external monitor to start again. FN + F5 did nothing.

  At that point, I called Toshiba for the support of the warranty (on-site, next business day). They had a technician with new monitor/display on site the next day (after a few calls me to follow up). It has replaced the screen but struggled to lift the screen up and running. He finally managed to logon Windows safe mode and get running but only display on 800 x 600. It has updated the Bios and drivers. He could then up to the 1024 x 768 resolution. Highest and the screen would be left empty.

  At that time we plugged in an external monitor via VGA. It worked, but the technician couldn't get the each display to run on each resolution. He left him speechless and he acknowledged that things still are not good. Later, after that the technician had left, I managed to get views working so each to their own resolution. However, I could not always connect the external monitor via DVI (VGA only). I was at least temporarily to work!

  The next morning that I turned the laptop on to find that I was back was started. No display on the laptop and on the external monitor only low resolution. It seems that the external monitor is simply cloning which should show the computer screen.

  Under the display properties > settings the display shows:
  1. (multiple screens) on NVIDIA GeForce Go 7900 GS
  2 Dell G2410 (Analog) on NVIDIA GeForce Go 7900 GS

  I know that when everything is working properly, he said not many monitors. The only screen I see is the Dell external monitor. And when I identify the Dell screen is no 1, even if it's not listed number 2.

  I don't know anything about the cards video etc, but a theory I have is that adapter is defective and is only show the analog signal. That is why I think that the screen of the laptop and external monitor (connected via DVI) works not done the external monitor connected via VGA (but it seems to be imitating the screen of the computer, allowing only the laptop screens range of resolution). Is that possible?

  Someone at - it ideas? The problem is likely to be the video card? I'm puzzled. I'll have to get the technician on the spot back (which will probably still 2 days and several calls, follow-up) and I don't want to lose any time. I have a business to run and I have now lost a weeks work already. If I can offer some strong theories before the technician comes on the spot, sometimes we can get parts ordered in advance.

  My warranty expires in a few weeks, so obviously I want this fixed correctly in the shortest time. I don't want to wait 2 days for a technician to come and have to wait another day or two for parts.

  Help, please!

  Thank you
  Ghjghj

  It is not easy to offer the correct answer and explanation why this happens here on the forum. In laptop cases should be tested with diagnostic tools to ensure that what is the problem.
  OK, exchange of display was a step in the right direction but, of course, this question is more complicated and doesn t happen due to the defective screen only.

  I agree with Akuma and also thinking that there must be a hardware problem on the motherboard. Before the expiration of the warranty, you should contact the service again and let check portable equipment.
  The fact is, if there is that no book of hardware malfunction should work fine preinstalled with delivered recovery image (Toshiba CD/DVD recovery facilities).

  Please, don't wait too long and contact ASAP. They check your laptop. the warranty is still valid and your laptop needs to be repaired.

  Good luck!

• Satellite Pro A300 - Wi - Fi connectivity limited after sleep mod

  I just buy a Satellite Pro A300 with Vista, but when he falls asleep or I close the lid, wake him up he cannot connect to the internet (Wi - Fi) until I reboot. I get an error message that I have "limited connectivity" to my wireless network. Can anyone help?

  As a solution, I recommend updating the BIOS and then update the WLAN card driver.

• Satellite Pro A300 - after sleep mode the mouse no longer works

  Hi all

  Hope you can help me with this problem because I believe that I have tried everything I know and my next step is really formatting all the computer again and again without knowing if it will work this time, because that's what I just did, during the upgrade to win 7.

  I have 2 problems:

  When the computer goes into sleep mode and I start it backup - the mouse stops working, unless I have move to another usb port. I get a message on usb can run faster...

  Another problem is a program of freezing at this point as well, this program is Oracle JDeveloper, don't know if that has to do any?

  I tried to update ALL the drivers of toshibas webpage - these problems still...

  Help, please!

  Would rather not format again...!

  Christian

  Hello

  Can you please tell us which version of Windows 7, you have installed? I mean if you have 32-bit or 64-bit.

  Is it just that you use an external mouse?
  The touchpad works after sleep mode? If so I think that it s something wrong with the external mouse maybe.

  By the way: make sure that you use the latest version of the BIOS. You can find it on the page of Toshiba.

  And as for the question of the Oracle, I think you should communicate directly with Oracle support. ;)

• Satellite Pro A300 PSAJ1E wake up to sleep properly

  I have a new Toshiba Satellite Pro A300 / PSAJ1E - 018006EN problems similar too.
  When the mine goes into sleep mode it re - will not start unless the power button "many" times, finally it lights, but in safe mode and everything which was being developed is lost.

  Hello

  I've read about similar problems, especially the screen remained empty after entry into standby or hibernation mode

  This could be resolved by updating the BIOS with the latest version available and by updating the operating system.

  Please do this first

• Re: Satellite Pro A300-1EA - wireless connection, drop all the time

  Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.

  It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.

  There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.

  I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 12.2.0.11.3 drivers from the Toshiba download page.

  Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.

  Laptop will be thrown against a wall soon if no one can help you.

  Thanks in advance.

  Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.

  Post edited by: mjbcrawf

  Hello

  Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.

  In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].

  If you have any other questions, please let us know!

• Satellite Pro A300 sleep and extended functions does not properly

  I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I find this problem:

  Sometimes (not always: maybe it depends on which program is running) in trying to put the computer to sleep or into hibernation, it does not stop, but only stop the monitor (Panel), while the fan goes on and the power light is green. Of course, a lot of energy consumption of battery!

  Then there is no other way to take off the computer by pressing the power button for a long time... but this is not correct!
  NB: my computer is always connected to a local network, and generally there are some browser windows open when I put it in stand-by mode.

  How can I fix?
  jomurray

  You must update the BIOS and must always close the programs and applications that ruin on the laptop before activating the standby mode or hibernation would be.

  I found this solution in this forum, and according to some people here it has solved similar problems

• White screen when exit Mode standby - Satellite Pro A300-15 t

  We have a new laptop Satellite Pro A300-15 t (PSAJ1E00F00FG) with Windows Vista 32. Display of the laptop will not return to the standby mode. He remains in black color. I can see the Green HDD indicator.

  I have to shut down & restart power with force using power switch.

  Is it any Hotkeys to get out of sleep mode? We are pressing on button / stop or keys.

  If someone had similar situations & got some solutions, please help...

  Thanks in advance...

  Hello

  As far as I know that these issues are resolved with BIOS update. Can you please tell us which model of laptop you have exactly and what BIOS version is preinstalled on your laptop?

  I think 2.70 is the latest version of the BIOS.

• Satellite Pro A300-1DZ cannot find HDD after BIOS update

  Hello world

  I recently bought a Satellite Pro A300-1DZ flea market.
  Put a new copy of Windows xp family.
  I then install all the drivers necessary own site of Toshiba and the end of it, I thought that it is perhaps a good idea to update the bios?

  OH DEAR what a big mistake.

  Now the netbook won't start windows.
  So I thought it's ok, I'll just start from the begginning and reinstall windows again, but he tells me that it cannot find a hard drive on my netbook?

  aaaaaaaaaaaaaaahhhhhhhhhhhhhhh, I'm going crazy,
  Could someone tell me please how to fix this? Thanks x

  Hello

  I think the value of the option SATA AHCI and hence Windows XP mode cannot find the HARD drive.
  It's because of the SATA controller.
  You can set the SATA AHCI compatible mode mode mode and this will allow you to install Win XP on the laptop without the use of SATA drivers.

  So, you have two options if you want to install Win XP:

  -> AHCI mode, but you must include the SATA drivers
  Compatible mode-> Win XP installation possible without SATA drivers

• Behavior of cooling after only the BIOS Flash - Satellite Pro A300

  Hello everyone,

  I have two laptop computers, Satellite Pro A300 Satellite A300. Both have the same configuration, C2D E8300 2 GB, ATI 3650 512 MB and so on...

  Today I flashed BIOS to the latest version (from V3.90 to V4.20) on both of them. Version 3.90 cooling was OK, fan worked only when it was necessary. But now after that flashing the BIOS fan runs constantly, he does not stop.

  What I did in Vista under Toshiba Power Saver Power Options, I changed the cooling method of maximum Performance to optimised battery, reverse cooling operation, but coverage (keyboard area) has become a bit warmer.

  My question is, what is the problem with cooling in the new version (v4.20)? And how to fix this?
  Yet once again, the problem did not exist before flashing the BIOS and the problem is on both computers.

  Thank you very much for your help!

  Best regards
  Osman

  > What I did in Vista under Toshiba Power Saver Power Options, I changed the cooling method of maximum Performance to optimised battery, reverse cooling operation, but coverage (keyboard area) has become a bit warmer.

  I doubt that there could be something wrong, I want to say that you said that after changing the method in cooling Toshiba Power Saver, the fans don't run all the time
  Usually the cooling modules are controlled by energy savings and the BIOS contains only the table fan.

  Keyboard of my laptop or on the left side of the laptop becomes too hot because on this side, you find the cooling modules that blow hot air

  Nothing so unusual...

• Satellite Pro A300 - no Internet to wide band wireless

  Hello

  I hope someone can help me. I have a TOSHIBA Satellite Pro A300 and the operating system Windows XP Professional 2002 Service Pack 3.

  I've had obviously my machine for a few years now and have never had any problems with it even though I used to always use an ethernet connection. Lately, but I moved to wireless broadband.

  When I try to install or update some programs or even just access the internet through them they claim that there is no internet connection. Although Internet Explorer and Windows updates are all still works fine. These programs include Itunes Store, Mozilla Firefox, Google Chrome, Log-me-in Vital Source Bookshelf, Adobe/Acrobat Updaters. As you can imagine it is a proplem to access updates and creates a problem with my studies that I use for my class.

  I tried other suggestions of forums such as the update of drivers, install all latest updaters for windows. However, I'm still stuck with the same exact problem.

  Can someone help me please?

  Hello

  I have to say WLAN connection is friendly and never had any problems. You can go anywhere online without cable home, which really nice and easy.

  But it strange that some features of Internet connection and other programs not

  If you connect the cable all programs have access to the Internet or you have the same problem with the cable connection?

  Maybe it's something wrong with the settings for the s WLAN card Check if you have set the correct TCP/IP parameters for WLAN card. Probably, you need a static IP address but who according to your router.

• Satellite Pro A300-15 t does not restart on the current after BIOS update

  Hello

  There is something wrong with my Satellite Pro A300-15 t. I made an update of the BIOS of toshiba recently with the latest Web site and it installed successfully. But after the installation, I noticed that my laptop does not restart when it is connected to the power adapter. It restarts and works perfectly when its power on the battery.

  After restart or start-up the laptop (on battery), it will be well when the adapter is connected.

  But, when I reboot when the adapter is connected, after his stop, just power light turns on for a second or two and gets off automatically. And not even the laptop starts manually by pressing the power button (LCD is turned off when the power light comes on for 2 seconds) when the adapter remains connected.

  So what I do is to pull the plug on the adapter, then start the computer manually by pressing the power button and reconnect the plug of the adapter to the laptop starts. It works well this way. Rest everything works perfectly.

  And this problem started after the update of the BIOS. Now, I don't know how to remedy the situation I don't know if there was a bug in the last update of the bios.

  Details of the update from: http://gulf.computers.toshiba-europe.com/innovation/download_bios.jsp?service=AE

  30/07/08
  Update the BIOS
  This Bios update adds functionality to your system.
  Satellite Pro A300 Toshiba of 3, 60 - WIN

  So please help me to solve the problem.

  Thank you best regards &,.
  Manjit M.

  Hello

  Try to update the BIOS again
  In addition, access the BIOS settings and set the default parameters. Save it and try again.

  Good bye