Satellite Pro A300D (PSAK1E) - update of the BIOS didn't

Hello

I recently tried an update of the bios after doing a clean install of windows 7 64-bit. The process is complete and the phone has rebooted. In the end, the laptop could not start and just displays a black screen.

I tried some of the methods on the internet using recovery from the crisis on a usb key, but have had no success

I'm not so im using the wrong combination of Fn + B etc or what but could really do with some tips

Thanks in advance

Hello

I put t think there is much you can do if the BIOS update failure. Usually in this case the ROM module needs to be reflashed, but this is possible only from an authorized service provider.

In my opinion, you should contact the guy and ask for help. I m sure they can help you solve this problem. :)

Tags: Toshiba

Similar Questions

  • Satellite Pro A300-1NT - update of the BIOS has not

    Hi, I'm an island here can someone help me solve this problem without sending it to the workshop of maintenance if possible.

    I've just updated tempro informed me a bios update. I ran the update, but it froze completely the system (Vista). I waited 15 minutes to show no sign of life (flashing lights or unlocking system) and then I turned it off thinking the thing crashed. Now, it won't turn.

    Is there a way to fix this? As it is turned on, it checks the cd player, can be resolved by updating the bios from a cd? Or a flash key?

    Help please :(

    Unfortunately, a botched BIOS update cannot be solved only by an authorized Toshiba dealer.

    Richard S.

  • Re: Satellite Pro A200 - black screen after the BIOS screen

    Hello
    I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

    My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
    I can access the toshiba Setup screen but not the installation of security mode.

    Kind regards

    Hello

    You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

    If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

    Check this box!

  • Satellite Pro P200-15W: update according to BIOS 1.9 fans walk all the time

    I have a Satellite Pro P200-15W. After recently running the BIOS update to version 1.9, the fans started running all the time and are extremely loud. Also, he did weird things for Firefox, Thunderbird and NAV.

    I would like to "Uninstall" the update of the BIOS if possible. I found [this link: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1080 89xml & sliceId = & dialogid = 24408215 & stateId = 0% 200% 202 4406262] who treats the restore running CD.

    If I run this CD, which will certainly restore the BIOS to the previous version?

    Is there a less destructive way (ie: that does not erase the hard drive)?

    Thank you

    Ben

    Post edited by: cannboys

    Hello

    It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
    Why the table fan has been changed?

    Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
    This helps to prevent the equipment from damage!

    > would like to "Uninstall" the update of the BIOS if possible. I found this link that explains the running restore CD. If I run this CD, which will certainly restore the BIOS to the previous version?
    > Is there a less destructive way (ie: that does not erase the hard drive)?

    Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive. The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
    But you can try to recover the laptop to see if you can solve the problems of software!

    If you want to reverse the BIOS, you will need to contact the ASP in your country!

    Sorry, but all I can suggest.

    Best regards

  • Satellite Pro L300 - which improved after the BIOS update

    Hello users,.

    I just finished an update of the BIOS on Satellite Pro L300 using Updater Insyde Bios. I tried the Toshiba site to see what's new or what has improved since the update my bios 1.7version v2.2. But there is no search results. I also went to the site Web Insyde, but neither have they put up what has changed or improved?

    Is there a documentation or information which could help me to know how my laptop has improved or better after the update of the BIOS and what has changed since my update of the BIOS?

    Thank you

    Hello

    I assume you mean a changelog of the BIOS. Well, normally this document is placed on the Toshiba page where you can download the BIOS update.

    If you can't find such a t changelog, there is no available changelog. All that s!

    In addition the BIOS update should be performed only if it of really necessary. This means that if everything works fine, I don't see a reason to update because this update is a bit risky.

  • Satellite Pro M30: Where to find the BIOS for download

    I'm looking for the new version of BIOS to my laptop.
    When I go to driver download site I can see only Satellite Pro M70 downloads but not by Satellite Pro M30.
    Where can I find the version of the BIOS, My F keys do not work and maybe the new version fix it (BTW I use XP SP3)

    Hello

    It seems that all drivers for some older series of laptops have been moved to ARCHIVE.
    So please first select the Archive.
    Then satellite Satellite Pro Pro Satellite Pro M30 M

    There, you can find all the drivers and BIOS.

    BUT NOTE; the update of the Bios will not help you to get the Fn keys work.
    You should first try to reinstall the * common Modules *, then the * utilities Hotkey for display devices *.

    Welcome them

  • Re: Satellite U300 - 153 (PSU30E) - updated after the BIOS, I can't install Vista

    I recently installed an update of the BIOS for the U300-153 from the Web from Toshiba website.
    Has been running Vista Ultimate at the time.

    From that moment I could not access my hard drive. Restart the BIOS upgrade, it would hang on to the Vista loading screen. I tried to reinstall Vista Ultimate, but it always freezes at the point "finish installation". Have not tried to install other operationg system.

    Help, please!

    Hello!

    Weird, but in my opinion, it looks like to what you have tried to install an incorrect BIOS for your laptop.
    Are you really sure that you have downloaded the BIOS for Satellite U300 PSU30E?

    In addition, I would try to load the default settings in the BIOS. Check it!

    Are you trying to reinstall Vista using Toshiba recovery disc or disc of Microsoft?

    Good bye

  • Satellite A660 - 11 M - update of the BIOS (Winflash) crashes every time

    Hi all
    I bought an A660 - 11 M a few months ago and thought I would update the BIOS to stop nagging Tempro and see if she helped no insidious problem, I tried to correct. I downloaded the zip, extracted and ran the .exe according to the instructions on the help site. WinFlash opens, runs the first step (new load bios) but hangs on step 2 (analyze the compatibility of old and new bios). Then a message "Winflash.exe has stopped working" Windows appears.
    This happens whenever I have try, even with shut down antivirus and directly after startup with no other programs running.
    Any ideas?

    I am running Windows 7 Home Premium 64 bit, I "dualbooted" Ubuntu using wubi, but the update to the bios was not until I installed IT... Perhaps it would work better in wine? ;)
    Any help is greatly appreciated!

    To be honest the best option for you is to remove Tempro system and be happy.
    In General, if the laptop works well, you need not update BIOS.

    If you see it doesn't work properly with her don t risk. If something's not going to screw you up BIOS and kill the machine.

    In any case, let's see if someone else with the same notebook has updated the BIOS successfully.

  • Satellite Pro U400 - how to upgrade the BIOS from 17/07/08

    I downloaded the update to the bios - the following file: bios - 20080717104036.zip
    I unzipped. But the way I did it twice and then I can not find the file to install this update.

    The first file of the sip consists of another zip file and in the second, there are 3 foulders: BOOT, EFI and SOURCES and 1 file BOOTMGR that is not a program.

    Can someone tell me what should I do with this update in order to install?

    Hello, Olga

    Updated the BIOS, you can use 3, 00 - WIN version. Extract all the files listed on the desktop, run WinPhlash.exe. Update BIOS version WIN can be done under operating system running.

  • Satellite Pro 460CDX: how to get the BIOS to recognize the disk external drive port?

    How do you get the BIOS to recognize external floppy port?

    HEEE? ?:|
    Are you sure you know how to update the BIOS?

    Come on cheshire! The update of the BIOS is risky If you n t know how to do!
    Usually, you don't need additional software to recognize the USB FDD drive or driver!

    I hope you have downloaded the good BIOS and use the correct procedure to update BOS, because if you do this in the wrong way to damage the motherboard!
    It is important to first read the BIOS update guide lines! You can find it on the download page of the BIOS under more information

  • Satellite Pro A300-257 while flashing the BIOS

    Hello

    I have a dilemma. I recently installed windows 7 on my laptop of girlfriends who is a Toshiba Satellite Pro A300-257, everything went well until I tried to update the Bios. I followed all instructions on the toshiba site had to put the model number in to get good bios double checked and triple checked before running the program, but when I ran the system crashed to halfway through the closed system update and now it wont even boot lights are on cd player is ROAR a few stays on black screen.

    I read many forums and it seems im not the only one with this problem.
    I just got the phone to toshiba and they say im not covered because I does not you can call and go through it with them on the phone, even if at no time did he tell me to do that I followed the instructions of there Web site.
    I also confirmed with them that I used the correct bios but they say that they are unable to prove that and I can put in the wrong information that I did not.

    In my view, there is a program that will allow me to boot from the cd so I don't have to go out and buy a reader external floppy to Flash the bios, I think that his winflash. Unfortunately, all I can find is the executable program on there website which im guessing will not start work.
    Anyone know where I can find the prog to update the bios and the bios file so I can create a cd bootable to Flash the bios.

    Any help will be appreciated with gratitude

    Thank you very much

    Hi mate

    I m afraid there is no alternative to reflash the BIOS to the traditional version of BIOS who can start the BIOS updated using an external USB drive and the floppy disk.

    The European driver Toshiba page contains only the BIOS Win-based that can be updated when the windows operating system. The traditional BIOS is not available for download. Only authorized service partners have access to this version of BIOS and that's why I don t see any alternative as to get in touch with the guys and to ask for help.

  • Satellite Pro U200 - how to access the BIOS?

    Hello

    HOWTO access / enter in the setup of the BIOS of Satellite Pro U200-PLUA1E-02802QS4?

    Hello

    I checked the forum and you should try to press the ESC key.

    It work? ;)

    Welcome them

  • Satellite Pro A40 - how to enter the BIOS

    I can get to safe mode, last known good configuration, but I forgot how to get BIOS. Please notify for the satellite Pro A40

    What and press ESC F1 immediately after power on

  • Satellite Pro 6100: cannot get into the BIOS and does not start

    I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

    Press ESC or F8 before to turn usually results in fast beeps sounds.
    Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

    Apart from that I can't really do nothing at all.
    I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

    Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
    I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

    Suggestions?

    Hello

    I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.

  • Satellite P300 - 1 H 9 does not start after the update of the BIOS didn't

    I perform an update BIOS, but before the update was completed second shortly after), the laptop has been frozen and is not used to shutdown evenn if hold start buton. So I disconnected the battery and plugin power after that I have reconnceted the plugin from power, then press the power button, it showed a black screen and i heard a
    beep (1 long, 2short)
    CLR CMOS can solve the problem?

    Where the rider is to do the reset?

    P300 - 1 H 9

    Thank you very much...

    Hi mate

    Seems that something was wrong during the BIOS update process.
    Usually the BIOS update should work correctly but the BIOS update is always sensitive technique and something like that can happen.

    Usually the CMOS must be cleared first and then the ROM module must be flashed again. This can be done by an ASP.

    Be in contact with an ASP in local guys help!

Maybe you are looking for