Satellite Pro A40 does not start after water spilled on it

Hello

I have a problem with the laptop of my companion. After she pours water on her, she has stopped working (no surprise really lol). I took it to pieces, right down to remove the motherboard to try to find the fault. Now when the AC is connected and batt is in place, NIP of the led, same thing happens without batt.

BUT the computer does not light when you press the power button. Im guessing that it is a hardware failure, since water isn't really best friend elecrtics, but I was hoping someone else might have other ideas/solutions?

I searched the toshiba site and found nothing on this laptop.

Any help is very appreciated!

Hello Danny

You are absolutely right. It's probably hardware failure and I fear that the motherboard must be replaced. I recommend you contact Toshiba service partners in your country and look for info on the repair and costs.

Good luck!

Tags: Toshiba

Similar Questions

  • Satellite Pro L40 does not start after changing the BIOS settings

    Changed some settings in the bios last night and now when I boot I get a screen black lights flash and hard drive lights up but nothing on the screen.

    There is no password on the bios... How would a BIOS reset to normal?

    I put a windows disc now, I hear the disc spin but nothing on the screen

    (I think that I have come to the right place on the forum)

    It s a Toshiba Satellite Pro L40 model psl4be.

    Thank you

    > There was no bios password... How would a BIOS reset to normal?

    You can set the default BIOS ONLY inside the BIOS access BIOS by pressing F2 or at the beginning of the initialization of the order

    But I doubt that this problem is related to the BIOS.
    Maybe it s just a simple bad luck that this problem happened exactly after change something in the BIOS.

    Try connecting an external monitor and check if you can see something on the 2nd screen.

  • Why Satellite Pro A300 does not start when you press the power button?

    Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

    In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
    Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

    What should I do to get a normal departure procedure?

    When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

    When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
    The same thing happen on my Satellite A300.

  • Satellite Pro L300 - does not start form DVD

    Problem: my Satellite Pro L300 will not start no optical drive (DVD)

    Leisure problem scenario:

    Insert the DVD Toshiba recovery in optical disc drive,
    Restart and during the boot prompt, press F12 and select the optical drive.
    Black screen and the cursor flashes in the upper left corner... after the seconds flew L300 starts to beep loudly. No message on the screen.

    Reports of BIOS version 1.50 while the latest version of the BIOS update on the web is to 1.40...

    Model No.: PSLB1E-02200GG3
    Serial 78685377Q

    I'm doing this because I want to change the OS from Vista to XP.

    Hello

    Stand by. You mean you are using a Toshiba original WXP for Satellite Pro L300 recovery CD/DVD or what?

    Have you tested with any other CD bootable (Linux)?

  • Satellite A200 PSAEOE does not start after upgrading memory

    Hi, I am first time here.

    I bought a Toshiba A200 PSAE0E-03J02JDR with 2 GB of RAM. I bought a pair of ram Corsair (2 * 2 GB VS2GSDS667D2). The computer does not start after that I installed the memory. I have intel 945 chipset, which is capable of 4 GB (manual page 1-2). The bios version is 1.8 2007.

    Can anyone help me, please.

    Post edited by: Marian ovidiu

    Hello

    The A200 series supports different chipsets;
    Intel 945 PM
    Intel 945GM
    Intel 943GML

    As far as I know your laptop supports the * 943GML * Intel chipset and the chipset supports 2 GB RAM max.
    Take a look at your laptop s user manual * Page 18.*

    Summer: 4 GB of RAM are not possible, and therefore your laptop does not start.

  • Satellite P200D-130 does not start after upgrading RAM

    Hi, I just upgraded the RAM on my P200D 130 but it does not start after that.
    I removed the 2 Hynix 1 GB PC2-5200 and put in 2 SO Kingston DDR2 2 GB PC667 (should be the same as PC2-5200).
    Post-market nothing happens, light power control is turned on, I him stays CD drive but screen black, no beeps.

    I put one of the 1 GB modules, it starts normally, then I tried a 1 GB into the lower slot module and a 2 GB module in the top slot and it works.
    I tried a single 2 GB module in each slot, even in the form of 2 2 GB modules.

    What could be the reason, better: what would be the solution to ensure that the modules of 2 x 2 GB to work?

    Thanks in advance,

    Michael

    Hello!

    I think that both modules are not compatible to the laptop.
    Normally you can upgrade your laptop to 4 GB. Look in the user manual.

    The RAM, you should bring the computer dealer and request a new one. More buy modules with the same specifications and dimensions. Try buying RAM with the same specs as before.

    Good bye

  • Satellite Pro L300 will not start after the Bios Update

    Help please.

    I simply formatted laptop Satellite Pro L300.
    I used all the drivers updated Toshiba and everything is fine.

    I then updated the bios with the latest version.
    After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

    The ides welcome

    Hey Buddy,

    What start menu, you mean?

    I put t understand how it is possible until you wrote that your laptop does not start?

  • Satellite Pro A120 - does not start with 4 GB of memory

    Hi all

    I'm new here so please be gentle!

    I have a Satellite Pro A120, model No. PSACOE - 037014EN and you want to increase the memory 512 MB present. I tried 2 different sets of memory 4 GB (2x2gb), but the machine does not start. I tried the different modules together and on their own but still no joy.

    Where I'm going wrong? This model will not take 2 GB memory modules?

    Any advice will be appreciated.

    Best regards

    Dr. Feelgood

    Hello

    Before changing something about your hardware, please make sure that if the computer supports the new pieces of material and, therefore, you can also consult the user manual.

    Anyway, I checked this and this laptop can only be upgraded to 2 GB maximum. This means that you can use the module of 1 GB in each slot and * no * 2 GB in each slot.

    So please bring back the memory modules and buy 2x1GB. It will work.

  • Satellite Pro L50 does not start with 8 GB

    I have a brand new L50 Pro of Satellite (PSKK3A-001001)

    Config of RAM is default of 1 x 4 GB memory DDR3 12800 1 use slot 1 slot free
    I removed 4GB and install 1 DDR3L 12800 8 GB but it does not start.
    The form of State capacity 16 GB so with 2 slots logically, that means 2 x 8 GB cards.
    He also said DDRL, which I assume is the correct type.

    The 4 GB mark was Hynix and the 8 GB is Apacer.
    Anyone have a resolution on this or know what the problem is?

    On this forum you can find many threads where people describe similar problems. In most cases the problem is compatibility modules, especially if Ram needs to be upgraded with modules produced by different manufacturers.

    According to the specifications of the laptop you need DDR3L memory (1600 Mhz).
    Talk with your dealer and ask if there's Kingston compatibility module. Kingston offers high quality and 100% compatible memory modules.

  • Satellite Pro L20 does not start

    I have a new satellite pro L20 M750
    does not start
    the thing is since the first time I tried to start it it would not start.
    I bought it over the internet and is still brand new in the plastic bag, would there be anything to make this power for the first time or it is defective.

    Thanks in advance

    Hello

    Did you check if the AC adapter is working properly?
    Initially, the battery is not charged. You must connect the power adapter to recharge the battery.

  • Satellite Pro C850 does not work after Bios Update

    My satellite pro c850 cd does not work after updating the bios of toshiba.

    What should I do?

    Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
    Flash the BIOS correctly?

    Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

    In most cases a special disc of crisis of the BIOS would be required to operate
    Not sure if you can get it repaired by your own
    Check this thread. Maybe this helps:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

    Otherwise you need help of the authorized service provider available in your country.

  • Satellite Pro 460 does not start with the new drive in

    I recently received a Satellite Pro 460, but he had no hard drive.
    It starts great without a disc in but as soon as I put a new hard drive in it does not start.

    I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.

    Someone has any ideas why this is and what I can do about it

    I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.

    What HARD drive you are trying to use on this good old classic?

  • My copy registered and checked for XP Pro SP3 does not start after changing the motherboard. Second problem is that I can't find my original install of XP Pro disc.

    After failing to find the source of reliable performance from my PC, I decided to bite the bullet and replace the motherboard, memory and the CPU. I installed a triple base 435 Athlon and a motherboard Gigabyte MA74GMT. Awarded PC again started the first time - but Windows will not, I get a number of options but none work - safe mode brings up several lines of messages on the partition of multi (0) disk (0) rdisk (0).

    A previous post suggested that a similar message meant some kind of malware but if I replace the old motherboard, processor and memory Windows works very well - in fact I use it now.

    Do I have an option but to reinstall Windows from a CD? Otherwise I have a problem - I can't find the installation discs for each piece of software except my Windows XP Pro! I do repair discs?

    Thanks for your help.

    Hi DaGeLi,

    · Provide us with the complete message you receive.

    Follow the methods below:

    Method 1:

    You were able to start the first time, you can try to boot to the last known good configuration and check the results. Link to get the procedure please refer to: how to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

    Method 2:

    If it doesn't then you can follow the procedure from the below mentioned link. As you do not have the Windows XP CD you can follow the procedure if you have already installed on the computer to recovery console

    How do I recover from a corrupted registry that prevents Windows XP startup:http://support.microsoft.com/kb/307545

    Otherwise, you may need to make the boot floppies. See the link for the procedure below:

    http://support.Microsoft.com/kb/310994

    You can also contact the manufacturer of the system to get the Windows XP CD.

    For reference: how to fix a computer that does not start:http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think

  • Satellite Pro C650 - does not start

    Hey all,.

    My Satellite Pro C650 boot not beyond a certain point. I tried to start in all modes different for example safe mode, mode of networking,

    However this proved unsuccessful, the laptop freezes and I meet a constant and regular beep at the same point every time that I try to start. I even tried to start Linux 12.04 USB to see if it's hardware or software, unfortunately is the same, which means hardware failure.

    The problem is that I don't know the bios beep codes and I can't understand what needs fixing.
    I was hoping you could help me!

    Thanks :)

    I think you need professional help with this problem. I don't know if your laptop is always guaranteed to be valid, but in my opinion, you should contact the nearest Toshiba authorized service provider and ask for help. They have special diagnostic tools and hardware malfunction can be detected and repaired.

    For the addresses and phone numbers, visit http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  • Satellite Pro A10 does not start - no hard drive

    MY TOSHIBA SATELLITE PRO A10 PRIMER NOT.
    WHAT I GET IS NO DRIVE DETECTED. TRIED TO REINSTALL XP BUT STILL NO LUCK.
    CAN EVERYTHING-ONE PLEASE HELP AS I AM PULLING MY HAIR OUT TRYING TO THINHK HOW TO SOLVE THIS ANNOYING PROBLEM.
    DOES ANY - ONE KNOW WHERE I CAN DOWNLOAD A RECOVERY DISC SO I CAN TRY THIS OPTION.

    Hello

    HARD drive is visible in the BIOS?
    If this isn't the case, then this means that the HARD drive is faulty.
    Try to replace the HDD with a compatible and try again.

    Good luck

Maybe you are looking for