Satellite Pro A40 fell on the wireless network card; Damaged PCMCIA slot

Similar Questions

• Can satellite M65-S9092 - I put the wireless network card?

  Hello

  Can I put my card Intel pro 2200BG on Satellite M65-S9092 wireless network so that it is no longer compatible with Windows 7? The Intel Pro 2200BG is no longer supported by Intel as it was abandoned and so they have not issued a new driver so that IPv6 works.

  So I would update my card if possible.

  Thanks in adavnce

  Concerning
  Paul

  Hello

  I think that it shouldn't be a problem to upgrade the WLan card.
  As far as I know its a card wireless network of miiPCI and you would need to also use a WLan card which would support the miniPCI interface.

  The wireless network card supports two pins for the WLan antenna cable.
  Usually, you must connect a white cable to the HAND and a black to the auxiliary voltage

  All that s

• Re: Satellite Pro A40 - connection to the local network

  Hello

  My names Andy and not bieng a total beginner computer, I tried to install all the drivers for my laptop model a SPA40 old fathers PSA45E-001VM-EN. (European model I think) everything looks ok, except that I can't get the ETHERNET driver.

  When I go into the Device Manager there is NO controller network displayed in the list and there is a yellow exclamation mark against two controllers ethernet ib the OTHER DEVICES tab looking here, I downloaded the atheros wlan xp file - 7704062.zip, broadcom wlan xp - installed 5604835.ziplan20070912134727.zip and nothing changes, we used to be able to go on the net and with the wifi card in the pci slot wireless go so I know its capable I think it's just the order of drivers and the drivers themselves,

  Then someone can point me in the right direction before as I have send myself crazy with this...

  You can

  regards and thanks in advance

  Andy

  Hey,.

  The drivers that you downloaded are WLAN Card and has nothing to do with the connection to the local network (Ethernet) normal

  I think you should check the Web from Toshiba site to download the latest LAN driver. You can find the drivers for Satellite Pro A40 in * archives *.
  ttp://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp h

• ProBook 4520 s - exchange of the wireless network card

  Hello everyone.

  I think the exchange of the wireless network card in my Probook 4520 s, due to the low flow.
  So I searched for a while a 5 Ghz supporting the card and found out that I am only able to get in the "white" cards list working. Then I looked at this page:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & objectid = c02487851 & jumpi...

  These cards can be any, that have been used in 4520 s. Mine (according to the Device Manager) is the Broadcom 4313 802.11b/g/n. This thing only supports 2.4 Ghz. Now, I looked at the list for a 5 Ghz supporting the card. I think that the 802.11A/B/G/N WLAN Intel HMC 572520-001 minicards can operate on 5 Ghz, because I read, that A appears only with maps of 2.4/5 Ghz. I read too, that maps of 2.4 / 5 GHz have 3 antennas, but on this card I only the slots for 2. Is this good? And this card would go into my 4520 s?

  Greetings,

  Colony

  Hi, colony:

  You are right about your statement about the cards being described as A/B/G/N dual-band.

  The best thing to do is look at Chapter 3 of your service manual.

  You can only order one of the cards listed as supported and it MUST have the HP reference on it or it won't work.

  I see only two possibilities for you...

  The 6200 Intel and Broadcom 4322.  Make sure you also get the part # that corresponds to what country you live.

  If your current Broadcom card has integrated Bluetooth, you will lose your Bluetooth capability if you order an integrated HP bluetooth module and probably the cable too.

  None of the dual-band cards have embedded bluetooth.

  Link to the service manual.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02439213/c02439213.PDF

  Then, you can order a card on the link below.

  If you do not live in the United States, you can change your country at the top of the page to yours.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=6857BCBBC4CD4470B9282F130A563697

  Paul

• How to upgrade the wireless network card in Windows Vista

  Hello

  Please how can I update the wireless network card?

  Thanks for the help

  Hello

  I suggest you try the steps from the following link to update the wireless network card drivers.

  a. right click on the Start button and click on Device Manager.
  b. display all devices on one.
  c. right-click on the WLAN driver and click on Update.

  Display us the results, once you try the steps above.

• Satellite Pro U400 (XP pro) cannot connect to the wireless network

  I got a U400 straight out of the box. I installed XP pro through the disc of recovery without any problem, except that I am not able to connect to the Wi-Fi here. (Other devices connect very well so the problem is at the end of the laptop) I tried to update via windows update (SP3) via a wired LAN connection but still the same problem. Other posts here have any suggestions for downloading new drivers from realtek. All of the solutions presented do not work for me. Anything else I can try?

  I am able to see all the wireless networks that are available in the range and may try to connect (provide the WPA password) but after watching the "preparation to connect" screen for a while he seems to abandon without reporting any error

  Hi guys

  First check if you are using the latest version of the BIOS.
  Second, clear all options of the router WLan security (filtering by MAC address, Firewall, encryption of WLan, etc.) and try to establish the WiFi connection.

  If you're going to succeed the problem is certainly related to the encryption settings
  Step by step, activate the settings and set up the router again.

  Good luck

• Satellite P20 S203: How can I use the wireless network card?

  Hello
  first - sorry for my English. I have toshiba P20 S203 (I know - old hardware).
  I read a few descriptions on this computer and I know that the model probably have wifi. I see on the left side of my laptop, but don't see it Win Xp Pro Sp2.
  How to turn on and connect to my lan wirreless?

  again sorry for my English...

  Hello

  As mentioned the laptop has no installed wireless network card, but you can improve with one compatible.
  The minPCI card has two cables; Brown and white.
  Usually the white cable be connected to the hand and Brown to the

• Satellite M45-S331 - 10 on the wireless network adapter error code

  Hello

  I have problems with the installation of the card WiFi on Toshiba Satelite M45-S331. The Intel pro 2200BG card is

  After you have reinstalled windows and the drivers for this card, I get the following message: "this device cannot start. ' / Code 10 / '. Where could be the problem? I found a few guides and tips for installation and reinstallation of this card but nobody does not work.

  Any help will be appreciated.

  Thank you
  Kramer

  Hey Kramer,

  Are you sure that you have installed the right driver WLAN? As far as I know that Toshiba laptops are delivered with various wireless network cards. The Toshiba page also shows Atheros WLAN drivers then perhaps you have an Atheros card?

  In addition I would try reinstalling Windows using Toshiba recovery disc. There are all the drivers and tools pre-installed.

• Satellite A30-104: WLan not available - I turn on the wireless network card

  I have a Toshiba Satellite A30-104 with an inprocomm ipn2220 built in wireless card. The problem I'm having is that when I get a network says its not available and asks me to turn it on.

  The driver is installed for the card, the switch for the wireless is set on you and I pressed FN & F8 and yet led remains off and nothing happens.
  I watched autour and seen that some people cover the terminals 11 and 13 and it works but not too sure.

  I also should this problem with a new card or is there a way to fix this?

  Any help much appreciated.

  Hello

  I guess that you upgraded the wireless lan card later, didn t you? I know that 11 + 13 pins hint and it worked, but after awhile the card did not and the connection quality was so poor that I bought a card atheros on ebay and this card works really well. So I suggest that you are looking for a card atheros on ebay and to install such card in your system since the cards are known to work properly in the toshiba machines.

  My configuration: Tecra 9100 with P4M and Atheros 5005 G MiniPCI card

  Welcome them

• 'Unable to Find' OJ Pro 8600 Premium on the wireless network

  Network: Router NetGear 3400, WEP 64-bit + computer Dell laptop + Officejet Pro 8600 Premium N911n, HPC782FE.  Vista 32 - bit OS.  New printer installation, wireless connection to the wireless internet router.  Test results of the wireless network said successful wireless wireless wireless printer installation works, connected, SSID found, the printer settings compatible with the configuration of the wireless router.  Network status says HP Network Configuration page is ready, Active connection Type is wireless, 802.11 Wireless status is connected.

  I can send HPeprint to the computer through the router, and it comes back through the router to the printer when it prints.  But I can't print directly from the computer to the printer, even if the two seem to be connected to the network via the same router.  I'm puzzled.

  When I press the icon on the screen of the printer wireless, it says connected, IP: 192.168.1.105 (I put manually after having read several problem Q & as), with the correct network name and MAC, with a strong signal.  When I click on "I can see that the status is logged on and the intensity of the signal" and then enter the IP 192.168.1.105 and then click Next, the search for a printer "Can't find printer" product and I'm back where I started.  When I jump to the next page and finally get to the HP Print and Scan of doctor, he is unable to identify or fix the problem.

  Hi Allen73,

  There seems to be some problems with the configuration of the network configuration. Please call our technical support to the 800-474-6836 if you're ok with it, they can log on to your computer and take a look to see what settings need to be corrected. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• Satellite M45-S265 - cannot install the wireless network

  Hi all!

  My laptop has had a big problem and HARD drive crashed. Unfortunately I lost all the data with no chance to recover anything. I installed a new HARD drive. I installed Win XP - SP3.

  But I'm unable to install the wireless network. I continue to pass the button in front of the laptop - nothing. I type the combination Fn + F8 - nothing. I think that I have not installed the driver corectly.

  P.S. - of course, I lost the CD.

  Can someone help me?

  Thank you.

  Hey,.

  > I think that I have not installed the driver corectly.
  Then you need to (re) install the WLAN driver. Otherwise, you are not able to use the WLAN connection correctly.

  Anyway, your model is listed on official Toshiba US page so that you can get all the drivers:
  http://www.CSD.Toshiba.com

  If you have any other questions, please let us know! :)

• Portege 3490CT: operating system cannot detect the wireless network card

  Hello
  Portege 3490CT with windows XP

  Problem: Try to install the wireless lan card. Windows is not able to detect the new hardware.
  Details of LAN card are NETGEAR 54 Mbps, model WG511v2

  Specifications for lan card
  It is 16-bit PCMCIA and CardBus 32-bit compatible and works in any available PCMCIA or
  Location CardBus. IEEE 802.11 g and b standard wireless technology.

  Specification for laptop Portege
  PC card slot supports two Type II or Type III PC cards; R2.01 PCMCIA, CardBus, PC Card16

  all tracks on this will be very useful
  Best regards
  Ashwani

  Hello

  What the BIOS has been installed on your laptop?
  If you use the Toshiba BIOS so there could be an option called configuration of the device.
  (it s is available on my Satellite)

  You change the option for all devices, you will be able to change the PC Card controller mode. I think you should play a little with this option.
  In other cases, the user was able to resolve a similar issue by changing this option.

  Please report if you re successful because it would be very interesting for me.

  Good bye

• HP Pavilion DV3t - upgrade of the wireless NETWORK card gets 105 error - please help

  I wanted to update my wireless NETWORK card, but after turning the power on, error 105 - unsupported network device

  I have the original is the broadcom wifi + bluetooth combo card and I intend to use a card Intel with 802.11ac ability and also has bluetooth onboard. Its also 2 x 2 if original antenna snap right in

  I'm on the latest firmware F15

  Is there a way I can install this other NETWORK card?

  Help is appreciated!

  Bericade.

  Chapter 3.

  http://h10032.www1.HP.com/CTG/manual/c01720761.PDF

  You can use these wireless cards.

  Regulations of the FCC sorry.

  REO

• Can not use the wireless network card after the upgrade to Windows XP Home SP3 on Satellite Pro 4600 edition

  Hello

  This is my setup
  Computer: Satellite Pro 4600 model ps460e 02hyt en
  Operating system: Windows XP SP3
  Mini pci wireless lan card: pa3070u - 1mpc mpci3a-20

  My problem:
  The operating system has been improved in win 98se to windows XP SP3.
  The mini pci wireless lan card does not work I try to download the right drivers but I have a big problem all driver downloads does not work. I don't know the physical name of the Council.
  Where can I find a solution for the update of these drivers? Is it possible that the mini pci wireless lan card does not work with windows XP SP3?

  Please I wait your help

  Thank you

  [email protected]

  I imagine that it will be compatible with SP2 well. You can test it please and post the result?

• Satellite Pro refuses to connect to wireless networks

  Hi guys! I need your help!

  My laptop Satellite Pro has suddenly decided to refuse to connect to wireless networks.
  all except my home router from the sky.

  I have moved since and am not able to connect to the free public Wi - Fi.
  No error message; Just click to connect to a particular network and nothing happens.

  I've been back home since and it connects automatically.
  I have Windows 8 and have not been able to find any trace of the Sky network to deselect etc.

  Any ideas?

  CAL

  > I've been since back home and it connects automatically.
  This means that you can connect to your WiFi network at home without big problems?
  This indicates that s laptop WiFi connection works correctly.

  I put t know what Satellite Pro, you have exactly, but have you checked if you can update the WLan driver?

  What happens if you change the Wlan standard? (802.11 a / B / G or N)
  This can be changed in the Device Manager-> card WLan-> properties-> Advanced tab