Satellite Pro A40: How can I change the video ram

Similar Questions

• Satellite Pro A10 - How can I change the start property?

  Hello

  How can I chance the A10 coastal boot?
  With ESC, I can access the BIOS, but I can't chance anything except the time.

  Thank you
  Tobias

  Hello!

  I think you should check the BIOS again because as far as I know, there you can change the boot priority.
  In addition, you should find more options in the BIOS as only the Date and time.

  Check it!

  Good bye

• Satellite Pro L20 - How can I change the optical drive?

  I want to change the optical drive in a satellite pro L20 but I'm having trouble finding instructions on how to remove it. Can anyone help?

  The CURIOUS reader is fixed with a screw at the bottom of the unit. Then, turn the computer over and remove one screw an optical disk drive.
  The second screw is hidden under the keyboard. That's why this screw must be removed also. And then disconnect you should be able to pull-out of the optical drive.

  But note; If you have no experience of these things, ask a technician for laptop computer to help him.

  Good luck

• Satellite Pro A300 - How can I change the size of the partition?

  Hello
  My Satellite Pro A300 came with 2 different partitions, and I would like to change the size of the partitions (the data partition is too small).

  Which would affect the recovery tools? Is there proposed formulas?

  Thanks in advance,

  Andres

  What operating system do you use on your laptop?
  If you use Vista, this document could be useful for you:
  http://195.182.196.33/KB0/TSB7101OB0006R01.htm

  This should normally does not affect the recovery of HARD drive but make sure to burn the disc of recovery if you didn t it yet.

  If you have the recovery disk, you are on the safe side.

• Satellite Pro 440cdx - how can I change the brightness or contrast

  My screen is weak and hard to see objects on the screen, any advice will be more welcome.many thanks for any help.

  Hello

  The brightness of the display can be changed by pressing the FN or FN + F6, F7 key combination.
  The contrast could not be changed on the screens of laptops that it is set automatically.

  But if it of very difficult to see anything on the screen, then an FL inverter may default.
  The fl inverter is a small part that controls the brightness of the display.
  Maybe it s need to be replaced.

• Satellite P300D-220: How can I change the Toshiba Multimedia Buttos config

  Hello

  How can I change the options for the buttons to support key Toshiba?

  I want to change the button to 'cut the computer', in 'turn led light on or off.
  Toshiba Button support shows only two possibilities: CD/DVD and in German "Your aus" what means "mute".

  What it means?

  In Vista was the button with the right option, now I have installed Windows 7 Ultimate x 86. Since then the mute only it.

  I hope you understand my question.

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=125277
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=34487

  This two threads did not help me, because I find no "utility control" in the list of the drivers for my computer.

  Hello

  Win 7 is different!
  The configuration of keys on Toshiba utility is not available for Win 7!
  After the installation of the VAP (value added package) for Win 7, you can configure the keys by pressing the button for the first time.

  I did it on my laptop after changing from Vista to Windows 7.
  I pressed a button and the window a pop-up asking me which application should be attributed to this button.

  As far as I know after the configuration it of not possible to change this once again

  Maybe after the new TPC facility you could configure the new buttons

• How can I change the video display Mode when the monitor mode not supported?

  While creating my new monitor, I changed the computer video display mode at 120 Hz by accident.  Now I see something on the monitor other than the words not taken in CHARGE the MODE.

  My system is a new HP Pavilion p7-1423W running Windows 8.1 with Intel i5-2320 3 ghz

  I tried the start mode by pressing ESC on power but do not help the startup options.  And the just F11 menu option makes the startup screen disapear and puts the monitor mode not supported.  Tapping F8 doen't work and tapping F12 just puts me in the bios menus that do not help.

  How can I upgrade the video card integrated with a video mode that is supported when I can't see the screen?

  I answer my own question because I found my solution, thanks to my grandson (freshman to Renselear Politech).

  I shoot to buy a monitor that displays a refresh rate of 120, so I could put my rear view.

  Here is the solution.

  My computer double exit DVI.  My grandson told me to connect my new monitor to the other output because the output does not get touched when I changed the original mode of production.  He has worked and is automatically selects the default monitors mode.  Then I've reconfigured the original output using the integrated display software. Solved!

• Satellite Pro U400 - How can I get the native screen resolution for external monitor?

  I have a samsung syncmaster external screen connected to a Satellite Pro U400.

  The resolution of the screen goes up to 1280 etc. but the minimum samsung is 1440 x 920 (ish I forgot).
  How can I get the samsung to display full screen expanded to save my eyes of the realativively small screen internal?

  Hello!

  Have you tried to update the display on your laptop driver? Check the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
  And what operating system are you using? Have you installed all Windows updates?

  For external LCD, monitors, you must set the screen refresh rate of 60 Hz.
  And if you want to change the resolution of the screen, you must select the second monitor in the graphics options on Windows.

  Good bye

• Re: Satellite Pro L300 - how can I reset the BIOS password?

  I put the password on the BIOS and electric start and I forgot the password.
  How can I reset the password?

  I have a Toshiba Satellite Pro L300.

  You must bring the laptop to an authorized service center to remove the password.

  Which country are you? Check your local Toshiba Web site for a list of the ASP (service centres).

• Satellite Pro 6000 - how can I update the BIOS?

  Hi all

  I have the problem that my laptop does not start 9 of 10 times with the message: * block 1 BIOS is damaged, call your service man.

  I want to update BIOS but for the Satellite Pro 6000 I can only find an update the BIOS from Windows. But my laptop does not start! Rarely the machine starts, but when I try to update the BIOS, I get the message that I already have the latest version of the BIOS

  My questions:
  * Is there a BIOS update file that is a BIOS floppy? (for example the Satellite Pro 6100 has 2 BIOS files, 1 Windows and 1 making a floppy disk)
  * Is it possible to update the BIOS with the same version of Windows?

  Or perhaps there is another solution for this problem? Has no need to update my BIOS?

  Thank you.

  Hans

  Hello

  I agree with Luke.
  The rom Bios module seems to be damage.
  Either it must be replaced or flashed again.

  But you won't be able to do that! The update of the Bios on the Toshiba page focuses on winning and you will not be able to update if the windows are not running.

  You last chance is an ASP that could check the BIOS ROM.
  As I said, most high, maybe new reflash module Rom help but cela can be answered simply by an ASP technician who checked this.

• Adobe Pro DC - How can I change the name of the speaker on the document?

  Here are two users dilemma - an Adobe account - in the same office. How we use Adobe Pro DC for editing documents for clients, but without a name of main account to appear as the author of the comments?

  How do I change the name of the author for the time where it is needed? Please give us the way to add the user and Installer.

  Thank you

  PAM

  Found the answer...

  Change name intervening on a document... go to preference > commenting > looking for ' comments ' on the right, the list and uncheck "user name always use as the name of the author.

  Tah - Dah! Easy lemon squeezy Prost!

• Satellite L300D - 11 M - can I change the video card?

  Can I change the graphics card in my notebook? For example on 512 or more?

  Hello

  No, the GPU upgrade is not possible because it is part of the motherboard.
  In most cases, the GPU is fixed and cannot be deleted.

  There is much discussion about the question about the GPU/Exchange upgrade and you will always find the same answer; NO, IT S NOT POSSIBLE.

  Welcome them

• How can I change the video memory on a Fujitsu laptop?

  Hello! I am a Fujitsu AH531 laptop user, and I'm trying to change the video memory settings in use. I have access to the BIOS, which is a Phoenix Tiano, and advanced settings to change my memory Intel HD Graphics 3000 64 MB to 128 MB could not be found. Any advice?

  Intel HD3000 graphics memory is allocated dynamically. I understand that there is no real dedicated VRAM. The mfg of the portable allocates a base amount of system RAM in common with the graphical part of the processor. In your case it's 64MB, but for some, it's as little as 32 MB and other 128MB, but the end result is much the same as more system RAM is allocated according to the needs.
  If there is a way to change the RAM RB you better ask on the forums of Fujitsu.

  Apparently, some people use 'batch' files to help with game performance, this is something that you may want to search each game uses a different file.

  More information-
  Specs Intel HD3000 and landmarks-

  http://www.Intel.com/support/graphics/sb/CS-029090.htm

  .

• Satellite Pro L - how can I update the driver chipset?

  I need to update the graphics driver for my 965 chipset. I downloaded what I thought was a driver out of date on the Toshiba site, but when I went to install, I get an error message indicating that my system does not meet the minimum requirements. If I try to install a driver from Intel site, it tells me to get the driver of my manufacturer...

  All tips (dumbed down please) Nice.

  Thank you

  Hello

  Can you please tell us what Satellite Pro laptop computer you have exactly?

  Normally before update you a driver, you must uninstall the old version first. Reboot the laptop, then I recommend that you install the most recent version.

  By the way: I had a similar that I deliver couldn t install new Intel driver. I solved the problem if I install the manual of the driver through the Device Manager and of the Advanced installation routine. I chose the directory driver myself and it worked! :)

• Satellite A210-171 - how can I change the contrast and brightness?

  I have myself in a bit of a mess here!
  I am a digital artist and because I had trouble with my colors of the laptop to the printer I have advised me of many artist to buy a color calibrator.

  My software has come today, but I was not able to do anything with it yet because it asks me to put my * contrast and brightness to 50% maximum setting * and I can't find where it is?

  I have a satellite A210-171 - please someone help me
  I'm desperate!

  Hello!

  The brightness and contrast, you can change in display properties.
  Check it!

  In addition, you can change the brightness of the screen using FN + F6 and FN + F7.

  Good bye