Satellite Pro A40: TPSODDCtl.exe - Ordinal not found

Hello

I reinstalled my Toshiba Satellite Pro A40 with XP sp2.
Since then, Power Saver have begun to return this error:
«Application popup: TPSODDCtl.exe - Ordinal not found: the 21 ordinal not found in the library of dynamic links TPSMainCtl.dll.»

I already removed energy saving and reinstalled again. Energy saving does not work well, m but every time this error apears I restart computer.

Does anyone have a solution for this problem?

Thank you for your attention.

AF

Hello AF

It's really not easy to say how this problem can be solved. Usually the new facility could solve it. This kind of problems is not easy to repair on easy way. If you are a user with lots of experience I suggest you remove all records related to energy saving, even entries in regedit (be careful).

Then, try again to install energy-saving. Sorry but I have no other suggestions.

If you will be able to solve this problem please let me know.

Good bye

Tags: Toshiba

Similar Questions

  • I receive the error RE5DX9.exe - Ordinal not found after installing Resident evil 5.

    Original title: error message

    Hai I use windows 8 pro recently I installed resident evil 5 on my pc, I get an error ' "RE5DX9.exe - Ordinal not found." " Here is the error in the event viewer. The 5297 ordinal not found in the dynamic link library xlive.dll. "How to solve?

    Hi Adhithyaraja,

    I suggest that take you a look at the existing thread resident evil 5 in xboxlive.dll the ordinal not found error that describes exactly the same problem and a possible solution (RyanT response - Support Engineer, October 5, 2009).

    Hope this helps and solves your problem. If Yes please mark your post as answered if this can help others in the community - thanks in advance.

    See you soon,.

    LZ.

  • McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.

    McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.
    Please tell us how to solve this error message. It does not seem to affect processes, just an annoying message that will not disappear. Help, please

    [Moved from comments]

    Hey Carol,.

    It would help if you could answer these questions.

    -What version of Windows is installed on the computer?
    -What antivirus software do you have on the computer?
    -When you get this error? It is when the computer starts for the first time?

    Here are a few troubleshooting steps that you can try to get the matter sorted.

    First of all, if you have Mcafee AntiVirus installed on the computer, turn it off for awhile and see if the error. McUICnt.exe is a file that is

    used by Mcafee and could be the reason for the error.
    Note: Antivirus should be reactivated when you have completed troubleshooting. Computer with antivirus off is: exposed to the virus.

    If Mcafee is not the cause, then try to do a scan complete antivirus on the computer in safe mode with networking using the Microsoft Safety Scanner

    Make sure that the computer is virus-free.

    Safe mode with networking: http://windows.microsoft.com/en-in/windows7/start-your-computer-in-safe-mode

    Note: the steps mentioned in the link applies to Windows vista and Windows 7.

    Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Let us know the results.

  • Error message: Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the dynamic library CSCDLL.dll, Quickbooks 2012 run

    Original title: error Ordinal 62
    I received the following error sporadically when I try the accounting version of Quickbooks 2012.  Accordingly, it does not run Quickbooks on my desktop but it allows me to run on my laptop.  Help, please.  "Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the CSCDLL.dll dynamic link library.

    Hello

     

    You can try the following steps and check.

     

    Method 1:

    Check if there is a cscui.dll C:\Windows\SysWOW64 folder.

    The cscui.dll does not exist by default in the C:\Windows\SysWOW64 folder.

    If you find the cscui.dll on the C:\Windows\SysWOW64 you can try right click and rename the cscui.dll to cscui.old.

    Method 2:

    You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

    For more information, you can consult the following link.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Method 3:

    You can also perform a clean boot and check.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    You can also check the following thread link and check.

    WARNING 62 Ordinal not found in cscdll.dll

  • Window pops - Up "RoxWatchTray12OEM.exe - Ordinal not found" Message

    Whenever I start my pc, I get a pop up message titled, "RoxWatchTray12OEM.exe" - Ordinal not say Found.The body of the window, "the 5 ordinal not found in AdavAudioDec.dll dynamic link library". I uninstalled a pocket computer program and do not know if that triggered the error. I tried re - install the program, but it does not get rid of the error message. It does not seem to affect what only on the pc, but it's annoying to see every time I start up the pc and keep appearing whenever I shut it down.  Any help? I have Windows 7 Pro.

    Do you still have the Roxio software installed? You can download "Autoruns" from the link below.

    Autoruns

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

    Extract and run the utility after download and after if completes the analysis of the process, click 'options' at the top of the page and click 'filter options '. Click on "Hide Microsoft entries", then click on "rescan". Scroll down the list and see if you can locate ' RoxWatchTray12OEM.exe. Uncheck the box next to it, disable it or right click and select Delete to delete it... your choice.

    You can check on the services tab for everything about ' RoxWatchTray12OEM.exe and disable or remove it. While you are at uncheck it or remove all the "file not found entries.

    Good luck

  • Fingerprinting is on Satellite Pro U400-160 - specified database not found

    Hello

    Well, I recently bought a Toshiba Satellite Pro U400. The first day, I took my fingerprints, and all went well.
    The next day, the software reinstalled himself for some reason any... and lost of my fingerprints.
    So I went back to the software TrueSuite Access manager, but this time I had a problem!

    ' *' Error: specified database could not be found ' n ' exact error message no, something similar.*

    I got this message, so I looked in this forum. I discovered that I could reinstall the software, so I did and got the last update, but it's the same thing.

    I don't know what to do, I just installed Office 2007 since I was the computer, nothing else.

    Help, please!
    Thank you very much

    You take the recovery disc and reinstall the OS using the Toshiba disc.
    The laptop must be set to the factory settings/configuration and then you should check if the same error message again.

  • Satellite Pro 4600 - Windows installation - HD not found error

    Toshiba Satellite Pro 4600 will not install win xp pro - I don't have a recovery disc - tried to use legit xp pro, but all I get is "the installation program found no hard disk units installed in your computer.

    Hello

    Are you sure that HARD drive is not faulty?

  • My Satellite Pro A300 series number is not found and can not get the upgrade to Windows 7

    When I get my Satellite Pro serial number, it is said that it is not in the database and I can't go any following get Windows 7.

    Can anyone help?

    Hello

    What model of laptop do you have exactly?

    Which from Toshiba Web site did you use to upgrade to Windows 7?

    Are you sure of your laptop is supported and upgraded Windows 7 ready?

  • Satellite Pro P300 - PSPCDA-01L00D - DVD not found after upgrade Windows 7

    After a new installation of Windows 7 Home Premium, and then download the required drivers from the Toshiba support site there are problems with the DVD drive in my laptop.

    I downloaded the app Toshiba DVD Player, which auto detects what version you need. After the application is running, I get the message "no installation Toshiba DVD could be found! You can only update a version already installed. »

    How can I get the DVD player to be recognized, if the application will be installed. Currently the DVD player will not play DVD - that will be a problem for my daughter who use the laptop.

    The driver Windows 7 page mentions too, updates will be available via Toshiba Service Station, but does provide no link. A search in the Web from Toshiba site fails to locate, where can I get this utility of?

    What you have found on the Toshiba download page, it's just the update and not full version.

    If you want to have really good player install VLC player. It's free and you can find Googling autour. This reader reads all video formats and I use it for a long time.

    It reads the DVD without any problem.

    Test it. If you n t it you can delete any it system.

  • Re: Equium A60-672 will record not on - winlogon.exe - Ordinal not found

    Hi, am a satellite with a start problem in Windows XP Home Edition. It crosses the main screen then shows the above and the message "the orinal found 258 in SHELL32 dynamic link library. LL.

    When I press OK it comes up with a user interface failure message saying "the DLL msgina.dll of logon user interface failed to load" all I can do is then restart and it's happening again with messages.

    I don't have a recovery or installation disk.

    Can anyone help?

    How to perform a repair of Windows XP installation. Check http://www.michaelstevenstech.com/XPrepairinstall.htm

  • PCCompanion.exe ordinal not found

    Hi all I installed companion pc and now I m getting this error 459 ordinal, in urlmon.dll dynamic I clik ok, then on pc

    Companion opens, but it's all white, with the exception of

    any help?

    the error on my laptop, in the pc at work, that the program works without problem

  • The 840 Ordinal could not be located in the iertutil.dll of dynamic library (on the top - wruninstall.exe - Ordinal not found

    I get these messages every time that I boot because is similar, in that I do not copy the other.  A registry cleaner moved the wrong files?

    Hello!

    You have made any changes on your computer recently? The error message you get is caused by the installer of Webroot. It is usually caused by a program or software that has been uninstalled, but some of the components are always there to look for the program and give this error.

    We suggest that you perform a cleanboot to isolate which program or software that causes this problem. To do this, please refer to this link: How to perform a clean boot in Windows.

    Keep us informed.

  • MOM.exe ordinal not found 575 could not be located in the binding Dynamics lybrary

    This happens every turning of time on my computer.   Usually, I restart my computer it is running a disk check and all is well.  Now I can't run a disk check.   Nothing that I can think is to help right now.
    Can you?
    Thank you

    Hello Supperman15,

    I would say from Windows after you perform a clean boot to see if the error message still appears:
  • Satellite Pro A40 - sound skips when loading programs

    PC: Toshibe Satellite Pro A40
    Sound card drivers: Soundmax integrated digital audio

    Hello

    When I bought my Toshiba Satellite Pro A40 my audio is not affected by loading programs and any other activities that could slow down my computer.

    I had to resinstall windows a few months back when my HD crashed.

    I reloaded all my drivers etc. and installed itunes.

    When I play music or any audio I listen to jump seriously when loading programs or when processes are performed on my computer.

    This used to be the case, I tried to change my settings from quicktime to run in safe mode, I even now deleted quicktime and itunes that I thought it was the source of the problems.

    Nothing worked, my sound is still seriously affected when my processor is busy

    I uninstalled, reinstalled my sound card drivers, but nothing has worked...

    I would really appreciate it if you have all the settings I could change to stop this problem.

    My voice through my microphone breaks a lot, so the people at the other end of a VOIP call can barely hear me... it's driving me crazy!

  • resident evil 5 ordinal not found error in xboxlive.dll

    Need to "xlive.dll"!

    I recently installed Resident Evil 5 on my PC XP - SP3 and receive the error "RE5DX9.exe - Ordinal not found". Here is the error in the event viewer. The 5297 ordinal not found in the dynamic link library xlive.dll. How can I fix this problem?

    Hello majidhirad, welcome.

    This gives a shot, the xlive.dll is actually in the 'Games Live' package installer. The download link is below:
    1 download the package
    2. right-click on the package and choose 'run as administrator '.
    3. install the application and restart your computer after
    4. try and run the game
    Let us know if it works,
    Thank you!

    Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for