Satellite Pro A40 - will not power

The laptop will not power, just a flashing yellow when the power connector is plugged?

Hello

Read here before you discuss your problem, please:

http://APS2.toshiba-tro.de/KB0/FAQ6201DK0004R01.htm#

Tags: Toshiba

Similar Questions

  • Satellite Pro M10 will not start again and comes up with the error message

    My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
    The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

    What can I do to get the notbook again reboot?

    Hello

    Seems that there are problems with the files of GoBack.

    Try to boot in safe mode and remove the Norton System works from your laptop ;)
    If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

    Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

    Good luck

  • Re: Satellite Pro A40 - has not found any connection WLAN in range

    I have problem with my laptop. I have Toshiba Satellite Pro A40 [model N°-PSA45E-001YMFS] with Microsoft Windows XP SP3 and I wanted to add a WiFi atheros (atheros 5005g) ar58mb5 map and an having problem.
    I have instaled lastes drivers for it. I see in drevice Manager and seems to work fine but when I try to look for other wirless shows that this text "found no wireless networks in range.

    First question: this model of laptop is possible to have this part?
    Second: Will it work?

    Sorry for my possible mistakes with this post but my English isn't correctly. Plese give me a quick answer for her.

    null

    Hey,.

    As far as I know a few Satellite Pro A40 were available with WLAN connectivity and other models not so theoretically WLAN works with Satellite Pro A40.

    You have installed the card WLAN, you connect the two antenna WLAN (black and white) cables to the WLAN card?
    Or you didn t these antenna cables?

  • Satellite A40 will not power

    My A40 Sat will not contribute to that. In the light is orange flashing constantly. I previously had a problem with the AC adapter failed and replaced it with a temporary universal adapter which worked very well so far.
    It of because I'm a foreigner and can not get the original Toshiba.

    Hello

    I guess you used is not not original and not supported AC adaptor / CC. I guess that the problem came from the AC adapter / CC.
    If the power supply microprocessor detects a malfunction, the DC IN icon flashes orange. The boss of blinking indicates an error. The blink code must convert the hexadecimal error code.
    This error can be read by the Service of Toshiba partner. It can give you a specific answer what s wrong.

  • Satellite Pro L300 will not start

    I have a portable Satellite Pro L300 and he won't start (in other words the power button and not going not past the first screen).

    Works for keyboard, but F2, F8 or F12 will not do anything, I can't here the disk hard powerup but it's like no one is at home. I don't know if it's the motherboard or the onboard battery. The computer is about 7-8 years

    Can anyone help.

    It s certainly nothing wrong with a RTC battery (as you said internal battery).
    The RTC battery can be charged. The unit must be turned on and adapter must be connected at least for about 18 hours.
    But I guess that this isn't a problem.

    The laptop does not start because of a hardware malfunction, but it's hard to say what role may be affected. But you should absolutely consult the RAM modules.
    This should be the first step, since the RAM modules are easy to replace.

    All other parts should be checked by the type of service.

  • Satellite Pro P875 will not display on '3D ready' 3D projector emachines V700

    Hello

    I am struggling with the display of 3D on a 3d ready projector emachines V700.
    I tried different software, stereoscopic player, CyberLink DVDPlayer 12 without success.

    CyberLink DVDPlayer is configured to use the Intel card - which will not limit its possibilities to use the 3D Vision NVidea support?

    On the NVidea Control Panel, the option for the specification of the graphics card is grayed out and configured for the use of the Intel card, for all CyberLink programs.

    The error message I see, is that the software can not enable 3D support. I used the mode "120 time sequential 3D LCD.

    The Toshiba Bue Ray Player has yet identified the Blu Ray in 3D, as it seems.
    It shows 3D blu ray than 2D and 3D button is grayed out.

    I have:
    Toshiba Satellite Pro P875
    HDMI cable
    EMachines V700
    Shutter 3D glasses: Hi Pro shock

    Hello

    From my point of view, you can use this capable 3D projector as part of the nVidia 3D vision.

    http://www.nvidia.co.UK/object/3D-vision-main-UK.html

    As I m not wrong not the display/projector must support 120 Hz and must be set to 120 Hz in order to use the 3D side-by-side mode.

    In addition you need a compatible software/player stereo standard (for example 3D VISION video player)

  • Satellite Pro L500 will not start on battery only

    Hello!

    I recently bought a Satellite Pro L500 and have the following problems.
    My laptop does not start on battery only. The Green led comes on and stays with the laptop in a gel (nothing appears on the screen).
    The only way to get this light off is to remove the battery.

    Starts EVERY time with AC power connected (with or without battery)-normal lights are displayed when connected.
    Works quite normal, once started - with or without power connected

    SOMETIMES starts with the battery only if I boot in a short time after I've used the laptop
    I tried the static release process but does not work. (hold button power supply without battery or power supply connected etc..)

    After having this problem, I've updated to the latest version of the BIOS but nothing helped
    Tried a different battery and did not help
    Is a Toshiba Satellite PRO L500 T4400 4GB 15 "laptop Win7 - only 3 weeks or so old

    Very annoying!
    Please anyone with a solution?

    Hello

    Try this.
    Remove the battery, disconnect the adapter and then wait a while. I would like to leave it disconnected for about 12 hours.
    Together the two parties again, charge the battery and then remove the power adapter.
    Then try to turn on the unit using only the battery.

    If that does not help, then you should get in touch with your ASP as fast as possible since the guarantee is valid and would cover all the checks of the equipment and replacements.

  • Satellite Pro 4340DVD will not initialize - pci.sys missing or corrupted

    I bought a Toshiba laptop Satellite Pro 4340DVD model # PS434C-3N152, Serial # Y0018185J, off E - Bay.
    The original operating system, Win 98SE has been upgraded to Win XP Pro. No disc don't came with the laptop.
    The laptop crashed yesterday while I was online and will not initialize to top.

    _Error message reads: _
    + The following file is missing or corrupt: System32\DRIVERS\pci.sys.+

    Any suggestions on how to fix this problem would be highly appreciated. I would love to have a manual for this camera, but have not been able to find one.

    Thank you!
    Sam

    Good news!

  • Satellite Pro A100 will not start!

    Hello

    I am having trouble with a Tosh. Satellite Pro A100 (model: PSAACE).

    The laptop was acting kinda funny for the last week (turned off on its own, saying that it is running on battery when pluged) then today he has decided to power off on it's own and does not restart.

    Having checked it of get out the power supply, have tried with and without the etcetc... This battery with no luck...

    When I press the power button the only thing that happens is the symble of battery next to her light flashed orange 11 times (same lengtht flashed
    SS each time).

    Can anyone shed light on what is wrong with it? Or what this error on the battery light code is trying to say?

    See you soon

    Matt

    Hello

    > When I press the power button, the only thing that happens is light with the symbol of the pile beside it flashed orange 11 times (same length flashes each time).

    Hmm I think that it s a hardware problem. I would say that this s a motherboard problem.
    Is the motherboard provides and flashing, error code.
    This only happens if a serious hardware problem has been detected

    Unfortunately, only the ASP can read this code and may know what this code means but certainly must be a hardware problem.

    In this case an ASP is your last resort.

    Good luck

  • Satellite Pro L300 will not start - cannot get into the BIOS

    Dear,

    I got a satellite Pro L300, width a HARD drive partitioned, with Win XP installed C and D with Windows 7 installed, the problem is the following:

    Days when I turned on my laptop, the OS splash screen appears, stop boot on Toshiba logo process.
    In addition, I can't enter the BIOS with the F2 key or the Boot Manager by using the F12 key.

    Help, please.

    > stop boot on Toshiba logo process
    This means that the laptop can not pass the POST (power on self test) properly and it would mean that a hardware problem has been detected on the motherboard.

    Remove one of the modules RAM (check both) and try to turn on using a single module of RAM.
    It is possible that one of the RAM modules is defective

    It would also be possible that the motherboard is malfunctioning, as you can see, it is hard to say what role could be wrong, but what looks like a serious hardware failure

  • Satellite Pro 6100 will not turn on - flashing LED

    Hello

    I have a probelem big, my Toshiba Satellite Pro 6100 lights so I decided to buy a new motherboard @ ebay.

    I have to build in and all I get is an orange error code. So I decide to make me buy a testet PCB (Powerboard) on Ebay, then the same thing! Then I bought a second Geforce but the same error code! So I all exchanged but the processor and I'm ascendant to buy a second to test or do you know Whata´s evil?
    I don't think that the new parts are broken!

    The error, the code of the orange Led is 01000011 or short, long, short, short, short, short, long, long and I did not see what maybe the problem!

    Sorry for my broken English I come from Germany!
    Hope for answers and greetings

    problemman

    Hello

    How do you know what the flashing of led said you? You are a sort of technician? How can you know that the "blink" (long, short) are 0 and 1.
    Do you know how to assemble the circuit board and don't you know that the things you have take care? Who PCB´s that you have exchanged?
    You said:

    Hand and VGA

    but the powerpcb too? And how do you know that the PCB´s are ok? Because why someone is selling you that with the 'work' of description?

    Would appreciate some feedback from you

    Welcome them

  • Satellite Pro L10 will not start the system

    Hello!

    I have a Toshiba Satellite Pro L10, which won't work for some reason any.

    The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

    It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

    There is also a 30 second countdown if I do nothing the portable samekh automatically.
    It is, none of these things work.

    Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

    He did about 50 times now and still nothing.
    I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

    Help, please!

    If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

    hope this makes sense and I gave you all you need to know.

    Thanks, B

    It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
    If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

    In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

  • Satellite Pro L300 will not start after the Bios Update

    Help please.

    I simply formatted laptop Satellite Pro L300.
    I used all the drivers updated Toshiba and everything is fine.

    I then updated the bios with the latest version.
    After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

    The ides welcome

    Hey Buddy,

    What start menu, you mean?

    I put t understand how it is possible until you wrote that your laptop does not start?

  • Satellite Pro L300 will not connect to Wifi after hibernation

    Hello

    can someone there help me please?
    I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

    The only way to do it is to restart the pc.

    Any suggestions?

    Hello!

    I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

    In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
    http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In addition, you run the factory settings or you have installed a different version of Windows?

    Good bye

  • My new Satellite Pro L300 will not work

    I bought a new Toshiba Satellite Pro L300 on eBay. I connected all the cables according to the installation guide. At first he asked my details, then I logged in and it went to a pages where he says he was preparing. Then I was sent to the newspaper in the section, and the same page appeared saying that he was preparing.

    After what happens about 5 times, he went to a black screen where the only thing I could see was my mouse cursor.

    I closed and restarted, I tried to go into the settings using F12. I was not able to work at all, no matter what I do.
    Unfortunately, I don't have a CD of the OS, but it was announced as having Vista as OS and have Microsoft Office Suite on him as a built-in wireless modem, so it was supposed to be ready just to turn it on. Well I can't even turn it on.

    What should I do? How should I do?

    At first, I must say that F12 has nothing to do with all the settings.
    At this point, I recommend using the new operating system installation using the HDD recovery procedure.
    How to proceed as a result of this document, you can find > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

    When the OS is installed and started up properly first thing you need to do is to create the disc of recovery facilities. "You can do it using preinstalled" Toshiba Recovery Disc Creator. The shortcut is placed on the desktop.

Maybe you are looking for

  • boot from the disk HARD second 4540 probook s

    Hello I replaced the optical drive with a second HDD on 4540 ProBook s. I read of this 2nd HARD drive but I could not configure BIOS to boot from it, and boot device options lists only the first HARD drive.

  • How to create different types of analog inputs without using the DAQ assistant?

    Hi all I would like to create multiple entries multiple analog channels of type... I mean I want to have the voltage of 5 and 2 channels of temperature... However, I am not using the DAQ assistant. I use "create channel" vi. Can anyone suggest me ple

  • Star Wars the phantom menace works not

    Original title: does not. Hi, my anniversary is the last week I had the game I wanted, but it works on windows 95 and 98 in any case to make it work on 97?

  • the comma inverted & @ keys are reversed

    Help, please.  On my Uk Microsoft wireless keyboard the inverted comma & @ keys are reversed, i.e. when I hit the key for the inverted commas I get & when I hit I get "."  How can I rectify this?  (I tried another keyboard & is the same thing!)

  • Price of blackBerry Smartphone app

    I'm trying to find out how prices global app going. Is it every year, every month or what? I've looked everywhere and can't find the answer I'm looking for. Thank you