Satellite Pro A60 does not illuminate

When I try to boot my Toshiba Satellite Pro A60, seems to be powered. A few seconds later, there is a click and it cuts.

I tried to turn on the computer with just the power supply with the battery removed, just with no power supply and battery and power, but none of these options are making a difference.

I also tried to clean the fan in the aspirant from the outside by a suction pipe, but even once, it did not help.
Can help you with the Please this problem?
Thank you.

Advertisement

Hello

Turn the laptop over and unscrew the cover on the ram. Then remove the ram and try to turn it on again. If it lights, put the piston inside the laptop and try again. It does not turn on? Then your ram is dead. If yes then you can replace, or have your asp replace it. If this does not resolve the problem, there is a small plastic cover that runs along the keyboard just above the keyboard. Take this off and then unscrew the fixing screws to the bottom of the keyboard. Under the keyboard, you may have a second RAM slot. If Yes, try to remove the RAM stick and turn. It work? If this isn't the case, you probably have a problem with the motherboard. If it lights fine, then you have found the issue and can replace or continue using it without the extra RAM. Hope this helps and have a nice day.

Tags: Toshiba

Similar Questions

  • Satellite Pro C660 does not illuminate

    Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

    any suggestions?

    Hello

    On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
    After doing this connect the power running and try to start again.

    What happens when you do this?

  • Satellite Pro A60 does not recognize DVD-R blank disc

    Can anyone help?

    I've tried several brands of DVD - R, but also blank discs DVD + R on my Satellite Pro A60, but very few of them are even recognized.

    Pioneer DV - RW DVR - K13A is supposed to work correctly when I check the Properties tab.

    I tried to watch upodates but frmwre - na .zip was not allowed to work, the D drive was not considered appropriate...

    Help, please!

    Thank you

    Hello

    What exactly do you mean? Is the drive does not support content or there is problem if you want to burn data on DVD-R media?

    Can you please explain this a little more carefully?

    Just FYI: I use the empty media TDK almost 5 years and I can say that TDK is very good for this kind of things.

  • Satellite Pro A60 does not

    When I start my Satellite Pro A60 I get the Toshiba screen, then it goes to a white screen and nothing else happens. I tried to remove the battery, disconnect it from the socket without success.

    I turned on the laptop and you press F12, but nothing happens, occasionally strange after the Toshiba screen, there will be a black screen with the words "Checking boot CD-rom" in the upper left corner and then nothing happens.

    Does anyone have any suggestions? If so could you please email me at [email protected]
    Thank you

    Hello

    Check please if the HARD drive is recognized correctly. Enter the BIOS settings and see if the HARD drive is listed there.

    You can also try to set the BIOS to the default settings and try using recovery media to see if the recovery procedure starts correctly (if the HARD drive is recognized properly).

  • Satellite Pro A60 does not supply power to the top

    Hello

    I have a Satellite Pro A60 and when I turn on the machine, the lights come on and the fan whirls for about 5 seconds and then the machine just turns off again.

    No matter if I have the battery or HARD drive in or not, the same phenomenon occurs.
    I guess it's problem of CPU or power supply Board, but I don't know.
    Is there anyone else who has had this problem and if so how is it resolved?

    Any help would be appreciated very with gratitude that I am out of warranty and need the laptop when you work from home.

    Thank you

    Hello

    I guess it can be a single processor or card mother related issue.
    If there is something wrong with the power supply for laptop card then the cell phone would not turn on, even for 5 sec.

    But it's only my personal suggestion to make sure what's exactly wrong check specifications should be necessary.

    So I think that a laptop computer technician should check it out.

    Good bye

  • Satellite Pro M40X does not ILLUMINATE

    Hi. -.

    I have a M40X Pro Satellite that I bought 4 years ago. It works well until a few weeks ago.

    I tried to turn it on but nothing happen, nothing, no lights, no sound at all, completely dead.

    It is connected to the power supply and the power light is on, (the battery light does not work since there is a lot of time). I tried to remove the battery, unplug the power cable and after several hours or even days, try to turn it on and I got the same behavior.

    Only power if it is (the power light when you connect the AC power) but when I press the button "turn on" the laptop, nothing happens.

    My laptop isn't under warranty, so if someone could help find a solution that would be great!

    Thank you

    Hello

    I have read your problem related to the failure of hardware. It seems that the motherboard is dead, no doubt, the southbridge. In any case, you should contact the service center:

    http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

    Note that the motherboard is one of the most expensive parts of the tower and don't know if it's worthy to replace, it is better to buy a used or a new laptop.

  • Satellite Pro L300 does not illuminate

    Hi all, I'm new to this forum.

    I have a Toshiba Satellite Pro L300 and I've had it for about 2 years.
    But yesterday I closed the laptop as usual. But later I went back to it and tried to turn it on. But it does not work. Instead, when I press the power button the LED next to the battery symbol flashes orange/orange 6 times and then turns off.

    Can someone tell me what it is? I tried to let it load, but that has not worked. The amber light is the only light that flashes. It does not recognize that I plugged in the charger and I don't think that the battery was flat. So I'm angry and helpless right now.

    Can someone help me please?

    See you soon.

    Hello

    There are several indicators;
    DC, while running, the main battery, LED HDD/ODD.
    So I guess the power LED flashes in orange. Right?
    This means that something was wrong on the motherboard.
    Maybe power supply electronic malfunctions

    In this case, there is no much to do only mobo replacement could help to...

  • Satellite Pro L20 does not illuminate

    Hope you can help. We have a 5 years satellite pro L20 who never gave a lot of days. It runs from Win XP, had an upgrade (crucial) memory to 2 GB and a new battery 4 years ago 4 years ago. 2 days ago, he simply left with the same noise you get when force a shutdown by holding the power button down. I tried to boot with no battery, just the sector and only on a charged battery. All to nothing does not.

    I then read the button of power with the battery and removed sector I did after leaving it overnight. When I replaced the battery it started as usual and lasted 30 seconds before turning off again, and then he was dead. I have tried all combinations with the ram up to 1 stick or kidnapped and attempted to get the bios with the HDD outside as well. Still nothing.

    I noticed that when I put the battery in 2 of the 3 flashes briefly, and now the button of pwer while pushing the battery causes a brief start 4 seconds.

    Any ideas as to what this may be? I suspect that the hardware and software. Also, I tried a different power adapter, once again no results. It stays just off.

    Thanks for any help...

    Hello

    I'm afraid it looks like a serious m hardware problem
    My first idea was a malfunction of the RAM in such a case, you could replace and test the memory, but it seems that you have already tried

    In my view there s something wrong with a motherboard or a part on the motherboard :(
    In this case I n t think a replacement of the motherboard would be useful since this part is very expensive

  • Satellite Pro L10 does not illuminate

    I have a Satellite Pro L10 and it stopped working yesterday. It won't turn on or charge up. No show of lights on the laptop when the charger is connected. I plugged in another toshiba charger but still no luck.

    Does anyone have ideas on what could be the problem with it and if it is easily resolved. The laptop is about 2 years old. Thanks for your help

    Hello

    Seems not beautiful it is maybe something wrong with the electronic power on the card mother s in this case the motherboard must be replaced to solve this problem

    But maybe you are a lucky guy and only the power adapter malfunctioning Yes, I know that you have tested the laptop with another power adapter, but are you sure that the second captain is supported?

    Anyway, in my opinion, nobody here can provide a solution exactly because without diagnostic tests we don t know what could be wrong
    This is why I recommend to contact the technician of the ASP for a help

  • Satellite Pro A60 - does not start

    My A60 will not start. The power supply is plugged with a green light on the power supply and the A60. The battery is full (light began in orange and is now green). Nothing happens when you press the power button.

    Tried to take the battery out and running on AC, but no change.

    Any ideas?

    Thank you
    L

    HI Laurent,.

    Try to remove the battery and also diconnecting the AC power for a few minutes. Then re-install the battery and try to turn on the unit. If this does not work, then remove the battery and plug in the AC power. Again try to power on the device.

    If none of the above works then you will need to refer to a Service partner authorized to have the laptop checked.

    Kind regards

  • Satellite Pro A60 does not recognize the accept/DVDs blank

    My computer will not accept blank CD - R disc so I can burn data on them, but my computer will not accept blank DVD discs that I want to be able to use to store more data.

    In the drive of my computer D reads "DVD - RW", I guess so, but am not sure that this means that my pc should be usable with DVD-R and DVD - RW discs but it do not accepts / acknowledges these when I put a try to burn something on them.

    My computer also does not accept / recognize DVD + R Virgin discs as I have tried those, just in case they might work.

    Help please!

    Post edited by: EDS

    Hello

    Have you also tried to burn DVD-R discs?
    I had also some problems with DVD + R discs, so I changed to a DVD-R and since all works well! :)

    I don't use Windows Media Player to burn discs, I use CD Burner XP. It is a freeware tool, very small and fast. It works on most versions of Windows, and you should try it too!

    Also check the Toshiba page for an update of the firmware!

  • Satellite Pro A60 does not start: missing or damaged config.sys

    Hello

    I turned off my computer Friday, I went back to his Monday - and it won't start. I thought that the config.sys file is missing or damaged.

    I tried all the usual methods - safe mode, last known good setting, OS etc, but none of it works. The computer does not recognize that the recovery CD is in the drive, either.

    As I don't have an original installation CD - the computer was shipped with the software already installed - I can't try either.

    I want especially to recover the entire system, but if I have to, I can live with that. Any suggestions would be welcome.

    Thank you very much.

    RONMAC

    Have you tried to boot your PC and press C after POST message? Recovery CD to be inserted.
    This C command forces the laptop to boot from ODD first.

    Maybe it works for you.

  • Satellite Pro 4600 does not illuminate

    The machine (not mine) went suddenly "dead" outside of the led lighting, even if she had been normally before it was turned off.
    When it was given to see what we could do, I fear a failure to the mobo, but when we lifted up at an angle and press the power button upward, it began. Everything was as it should be - until we turned it off, then same thing happened, and again, it has started, then while I was holding it at an angle.

    We thought at the beginning it was a faulty switch that could be replaced, but now we believe it is more likely to be something that is broken and is intermittent contact when it is in the right position.

    If anyone else has had a similar problem and can tell us a little more about what we are against, please?

    Hello

    It's not easy to say why this problem occurs. Of course, this looks like a hardware failure, but I can't give t you a good answer exactly what s wrong.
    Well, I think that the best way is to contact the after-sales Service of Toshiba partner. He can start the diagnostic test to analyze the malfunction.

    concerning

  • Satellite Pro A100 does not illuminate

    Hello

    I have problems with my computer toshiba laptop, suddenly the other day, he does, instead when the power button is held three lights... turn the caps lock light and lighting under the f10 and f11 keys, when plugged into current alternative battery light turns orange.

    I tried to remove the moemory models and hard drive, but nothing works, nothing changes.

    any help would be appreciated.

    Thank you, tom

    Hello!

    You have the same problem, if it is start with battery or AC/DC adapter?

    In the worst cases, you need help from the ASP. The technician must check your laptop to make sure that the part or parts are defective.
    On the Toshiba site, you can search an ASP:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good bye

  • The product key on my Satellite Pro P300 does not work

    The product key on my Satellite Pro P300 does not work.
    I entered the key from the sticker on the back of the computer. What I am doing wrong?

    Hello

    Why use this product key?

    Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

    Second, it's an OEM key and it will not work with other versions of Vista!

    Cheers mate

Maybe you are looking for

  • Always on?

    Is it possible to set my iMac it is always 'on' (to facilitate Cloud Printing when I'm away from the machine), but the screen is off? Thank you

  • Incomplete import of music in iTunes

    I just finished all my my CD library import music to iTunes 12.3.2 64-bit on my Macbook Pro.  The whole process takes about three days. I was very pleased when he did. all imported and was organized by the artist and the title of the album. Now for t

  • HP laptop: enter the password for this account

    I forgot my password please help me to reset it thank you

  • X 40-problem with keyboard

  • From QByteArray image of c ++ to QML

    Hi all I need to show a png image in a page QML using a QByteArray transmitted routines c ++ in QML. Is it possible to do that...? Y at - it a simple method for it. ?