Satellite Pro A60 does not recognize DVD-R blank disc

Can anyone help?

I've tried several brands of DVD - R, but also blank discs DVD + R on my Satellite Pro A60, but very few of them are even recognized.

Pioneer DV - RW DVR - K13A is supposed to work correctly when I check the Properties tab.

I tried to watch upodates but frmwre - na .zip was not allowed to work, the D drive was not considered appropriate...

Help, please!

Thank you

Hello

What exactly do you mean? Is the drive does not support content or there is problem if you want to burn data on DVD-R media?

Can you please explain this a little more carefully?

Just FYI: I use the empty media TDK almost 5 years and I can say that TDK is very good for this kind of things.

Tags: Toshiba

Similar Questions

  • Satellite Pro A60 does not recognize the accept/DVDs blank

    My computer will not accept blank CD - R disc so I can burn data on them, but my computer will not accept blank DVD discs that I want to be able to use to store more data.

    In the drive of my computer D reads "DVD - RW", I guess so, but am not sure that this means that my pc should be usable with DVD-R and DVD - RW discs but it do not accepts / acknowledges these when I put a try to burn something on them.

    My computer also does not accept / recognize DVD + R Virgin discs as I have tried those, just in case they might work.

    Help please!

    Post edited by: EDS

    Hello

    Have you also tried to burn DVD-R discs?
    I had also some problems with DVD + R discs, so I changed to a DVD-R and since all works well! :)

    I don't use Windows Media Player to burn discs, I use CD Burner XP. It is a freeware tool, very small and fast. It works on most versions of Windows, and you should try it too!

    Also check the Toshiba page for an update of the firmware!

  • Satellite Pro A60 does not illuminate

    When I try to boot my Toshiba Satellite Pro A60, seems to be powered. A few seconds later, there is a click and it cuts.

    I tried to turn on the computer with just the power supply with the battery removed, just with no power supply and battery and power, but none of these options are making a difference.

    I also tried to clean the fan in the aspirant from the outside by a suction pipe, but even once, it did not help.
    Can help you with the Please this problem?
    Thank you.

    Hello

    Turn the laptop over and unscrew the cover on the ram. Then remove the ram and try to turn it on again. If it lights, put the piston inside the laptop and try again. It does not turn on? Then your ram is dead. If yes then you can replace, or have your asp replace it. If this does not resolve the problem, there is a small plastic cover that runs along the keyboard just above the keyboard. Take this off and then unscrew the fixing screws to the bottom of the keyboard. Under the keyboard, you may have a second RAM slot. If Yes, try to remove the RAM stick and turn. It work? If this isn't the case, you probably have a problem with the motherboard. If it lights fine, then you have found the issue and can replace or continue using it without the extra RAM. Hope this helps and have a nice day.

  • Satellite Pro 6100 does not recognize the single battery external power

    Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

    By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

    I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
    Any ideas?
    Concerning
    Phil

    Hello

    Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
    In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
    The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

  • Satellite C650-1CP - does not recognize DVD

    For some unknown reason, my Satellite C650-1CP stopped reading DVDs (although it works for cd), it does not recognize all simply that a DVD is in the drive.

    I tried several games (including games that worked on my laptop) and none do not work, any suggestions?

    Hello uncleben,.

    Maybe the DVDs are scratched... Have you tried different types of DVD and you are sure that the drives are ok?

    You can also try to remove the server - and lowerfilters in the registry. So follow the instructions in this Microsoft article:
    http://support.Microsoft.com/kb/314060

  • Satellite A200 27z does not recognize DVD drive

    Hello

    Ive got the computer laptop toshiba Satellite A200 27z & a while a go it wouldn't turn on at all, I took it to a computer repair shop & they seemed to solve the problem, except that they delete all the "stuff" that comes with the laptop.

    On the most part, he always does things I want to do. But recently I went to play a dvd in there & it won't work, even if it does not play DVD if theyre sent to me by msn etc.

    Normally, when I put a dvd, toshiba dvd player would automatically right away, but now he used. When I go to manually open the dvd player toshiba a message just ups saying:

    * the specific drive is not found. Check the settings by going to settings > stock settings > source. or otherwise check that the disc has been correctly connected to the levels

    Ive been in the "action settings", but the source area is blocked (do not type anything in it). I don't know much about computers and so do not know how to check if the drive is properly connected.

    It will not also recognize when I put a cd that he either, as normally if I put a cd in and then itunes would automatically load upward, now itunes will not appear if a cd is in the laptop & I can't find it anywhere.

    can help someone, I have no idea about these things!

    I had this problem a few months ago, I thought that I should send it to be repaired but Windows Mr Fixit made and my dvd player is running again
    Here is the link
    http://support.Microsoft.com/GP/cp_fixit_main

    I hope this works for you

  • Satellite Pro A60 does not

    When I start my Satellite Pro A60 I get the Toshiba screen, then it goes to a white screen and nothing else happens. I tried to remove the battery, disconnect it from the socket without success.

    I turned on the laptop and you press F12, but nothing happens, occasionally strange after the Toshiba screen, there will be a black screen with the words "Checking boot CD-rom" in the upper left corner and then nothing happens.

    Does anyone have any suggestions? If so could you please email me at [email protected]
    Thank you

    Hello

    Check please if the HARD drive is recognized correctly. Enter the BIOS settings and see if the HARD drive is listed there.

    You can also try to set the BIOS to the default settings and try using recovery media to see if the recovery procedure starts correctly (if the HARD drive is recognized properly).

  • Satellite Pro A60 does not supply power to the top

    Hello

    I have a Satellite Pro A60 and when I turn on the machine, the lights come on and the fan whirls for about 5 seconds and then the machine just turns off again.

    No matter if I have the battery or HARD drive in or not, the same phenomenon occurs.
    I guess it's problem of CPU or power supply Board, but I don't know.
    Is there anyone else who has had this problem and if so how is it resolved?

    Any help would be appreciated very with gratitude that I am out of warranty and need the laptop when you work from home.

    Thank you

    Hello

    I guess it can be a single processor or card mother related issue.
    If there is something wrong with the power supply for laptop card then the cell phone would not turn on, even for 5 sec.

    But it's only my personal suggestion to make sure what's exactly wrong check specifications should be necessary.

    So I think that a laptop computer technician should check it out.

    Good bye

  • Satellite Pro A60 does not start: missing or damaged config.sys

    Hello

    I turned off my computer Friday, I went back to his Monday - and it won't start. I thought that the config.sys file is missing or damaged.

    I tried all the usual methods - safe mode, last known good setting, OS etc, but none of it works. The computer does not recognize that the recovery CD is in the drive, either.

    As I don't have an original installation CD - the computer was shipped with the software already installed - I can't try either.

    I want especially to recover the entire system, but if I have to, I can live with that. Any suggestions would be welcome.

    Thank you very much.

    RONMAC

    Have you tried to boot your PC and press C after POST message? Recovery CD to be inserted.
    This C command forces the laptop to boot from ODD first.

    Maybe it works for you.

  • Satellite P30: it does not recognize DVD discs properly

    Hello I have a Satellite P30, can't read the DVD or CD when I try to open the DVD or CD the Explorer session seems to hang for a while and then comes with a screen reader DVD-RAM with the option on the left to write files to a CD. I installed the latest drivers and BIOS for my laptop.

    I am at a loss, everything was working fine until recently the does'nt PC seem to recognize I have a cd or drive normalDVD drive it just see the of it as a DVD RAM drive.

    When I put a dvd in side light flashes orange and the system hangs just for awhile. I sometimes get an IO error when trying to read from a cd. What I put in it thinks I want to write files

    HI Matt,

    I suggest that you check in Device Manager to see if there is a problem with your hard drive. In any case, it may be helpful to remove the device from Device Manager and then restart for the drive is recognized again as a new installation.

    Kind regards

  • Satellite Pro A200 does not recognize the hard drive, XP Pro

    When I try and load XP Pro SP3 (32 bit) it will not install because it doesn't have SATA drivers. I downloaded the drivers and have an external floppy drive to install drivers by pressing F6. My question is the machine is listed as 64-bit and XP Pro is 32-bit. Choose the drivers ICH8M 32 or 64 bits. IE is the 32 or 64 bit on ICH8M see hardware or operating system. Computer's Satellite Pro A200 PSAE4E-01700WEN.

    Any help appreciated

    Dave

    Hello

    If you are using the 64 bit OS, then also use 64-bit drivers.
    I found very nice HowTo from Toshiba.

    Check it! It s certainly interesting and should be useful.

    * + How to integrate a SATA AHCI driver into a Windows XP Setup CD + *.
    http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  • Satellite Pro A60 - does not start

    My A60 will not start. The power supply is plugged with a green light on the power supply and the A60. The battery is full (light began in orange and is now green). Nothing happens when you press the power button.

    Tried to take the battery out and running on AC, but no change.

    Any ideas?

    Thank you
    L

    HI Laurent,.

    Try to remove the battery and also diconnecting the AC power for a few minutes. Then re-install the battery and try to turn on the unit. If this does not work, then remove the battery and plug in the AC power. Again try to power on the device.

    If none of the above works then you will need to refer to a Service partner authorized to have the laptop checked.

    Kind regards

  • Satellite Pro L500 does not burn DVD

    I have TWO laptops Satellite Pro L500 with a TSSTCorp TS-L633C DVD - RW. BOTH have the same problem - burn a DVD fails during the finalization process, regardless of how fast you burn at.

    Burn the CD works fine.

    Burn fine blank DVDs on a laptop Satellite L500D using the HL-DT-ST DVDRAM GT20N drive, as well as on an another Satellite Pro L500 which is to use a Pioneer drive.

    Two laptop computers with problems are ongoing running Windows 7 Home Premium 64 bit, but nothing else than the software that came with the laptop. Both are new straight out of the box. Driver is the current version driver, from what I can find.

    Any suggestions? When a laptop has shown problems, I thought that maybe it's the reader, but now 2 notebooks of totally different stores showing exactly the same problem?

    Thank you.

    Hello

    Have you tried burning programs such as Nero, Ashampoo Burning Studio? Check this box and we post

  • Re: Satellite Pro L300 - does not recognize CD

    Put the CD in laptop and nothing happehs - went to my computer and tried to run from there, but still nothing.
    Have you tried several CDs and none seems to be recognized - it's like the driver does not work.

    Please respond in terms for a fool of computer

    See you soon

    Hello

    First, you must give us more information about your exact model laptop number and the operating system.
    Your ad is not so exactly, so have you tried to boot from a CD? It work?

    If you only have problems in Windows, you should try to remove the upper and lower filters:
    (1) run Regedit (start-> Run-> Regedit)
    2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
    (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
    (4) restart.

    Good luck! :)

  • Satellite Pro A10 does not recognize the drive WEIRD AD - 7540A model

    Hi all.

    I just bought a new model slimline DVD rewritable AD - 7540A, brand Sony NEC Optiarc. When it is plugged into the computer laptop and for the POST, it appears the 'IDE #1 error' message after the operating system starts, I am unable to open the drawer and no CD/DVD can be read.

    I checked this drive on another laptop from another brand, and it works fine, so the problem is not in the drive itself. Could someone help me?

    Thanks in advance.

    The problem is simple.
    Your phone does support not all readers of CD/DVD slimline because different or bad master/slave/c-salt settings.

    The IDE #1 error message indicates that the BIOS cannot recognize the device connected to the #1 IDE controller.

    In your case, the solution is simple; you need to buy a compatible CD/DVD player and supported

    Mayen a user manual would provide details on the management of records.
    If not, then contact the ASP in your country and ask some compatible devices!

    At soon buddy

Maybe you are looking for