Satellite Pro A60 PL: message: USB device can run faster

Similar Questions

• USB device can run faster

  Hi all

  I recently bought a USB-6008.  When I plug it into my PC, I get a message "this device can perform faster.  This USB device can perform faster if you connect it to a Hi-Speed USB 2.0 port.  For a list of available ports, click here. "When I click on the message, it shows me a list of available ports, but none of them seem not to be USB 2.0.

  All my USB ports are supposed to be USB 2.0.  It is an Asus P5N72 - T Premium mobo.  I have updated the bios, and made sure that USB 2.0 is selected in the bios Setup.  I use Win XP SP3.  According to the Microsoft Web site, there was a known problem with XP supporting USB 2.0 on Asus Motherboards, but that he was supposed to have been fixed in SP1.

  I realize that it is a matter of Windows probably more than a question of data acquisition, but I spent the entire afternoon on Microsoft, Asus and other sites.  Can anyone help?

  Thank you

  Ed

  
  

• Message: This device can perform faster if you connect high speed USB

  Hello

  I have a laptop Toshiba Satellite 2009 of Vista.
  I just bought a multimedia design Memup Feel of the disc hard 500 GB.

  My concern is that when I connect to my PC, I have the following message:
  + This device can perform faster. USB devices can be faster if you connect to a USB 2.0 high speed +.
  + To get the list of available ports, click here. +

  Then I have a list of ports in bold, but I don't know what to do with.

  How to solve my problem?

  Thank you

  Hello

  Are you sure that your laptop is Satellite 2009?
  I put t know this model of laptop.

  But I know that this error message; This message appears if you connect a USB 2.0 device to a slower USB port; That is, USB 1.1
  But I think that your laptop supports USB 2.0 ports either TI problem disc external HARD s or the issue of USB drivers
  Try updating the chipset driver you can also delete all the USB controllers and hubs in Device Manager ports. Restart the unit. After restarting again the OS would recognize all USB ports.
  Then try to reconnect the USB HDD

• USB 3.0"your device can run faster.

  I recently bought a HP ENVY 15 t-j100 Quad CTO Notebook Windows 7 Professional Edition (PC product #: E1P05AV). Four ports are supposed to be usb 3.0, but sometimes when I put my flashdrive 3.0 in, it says "your device can run faster. I've updated all the drivers and the problem seemed to go away. But recently I have found that if I do not have the flash 3.0 player in the port completely, or if I do it slowly, he sometimes with the same message. Might not have in a sense caused the problem in the first place? It is even supposed to have this message when this happens? Any help would be appreciated.

  Hello cck979,

  I see that you have a problem with 3.0 ports on your laptop and your flash 3.0 player. I will try to help you with this.

  This document may have information and steps that will help you: Troubleshooting connections USB (Windows 7). Generally however if the unit is not plugged in all the way or it won't work not otherwise you will get some sort of message.

  Also have you noticed if this happens with all ports, or a specific port?

  See if the document offers further assistance.
  Thanks for posting on the HP Forums.

• How can I get the drivers for xp usb / get the device can run faster in the listed ports

  POP UP WITH SAYING HIS DEVICE CAN RUN FASTER IN THE PORTS LISTED, I HAVE THE WIRELESS CARD WIRELESS, MOUSE AND SPRINT U600, CONNECTED TO THE LAPTOP, THE PROBLEM JUST STARTED

  See the discussion of the difference between USB 1.1 and USB 2.0 and why this error message http://ask-leo.com/what_does_the_usb_device_can_perform_faster_mean.html
  If you have an old computer, you do not all USB 2.0 ports or some of your USB ports may be 1.1 e.a. 2.0

  Open the Device Manager (start > run > devmgmt.msc > OK) and expand the "Controllers of Bus USB" section by clicking on the + sign to the left.

  Are there warning icons? If so, provide details

  It will probably take several entries for "PCI to USB Host Controller" or similar terms.  Please report if one (or several) of these entries are for a "PCI to USB Enhanced Host Controller.  If none of the USB controllers is "strengthened", you do not have USB 2.0

• Receive the error message"this device can perform faster if you connect it to a 2.0 port" in the taskbar

  In the taskbar, this always happens "this USB device can perform faster if you connect it to a 2.0 port" and is a list of the USB Composite device. How can I prevent this arise?

  Hello

  1. Once you get this error message?

  2. it happens with all USB devices or is this a problem with a specific USB device?

  3. has the USB works well before camera?

  Method 1 : perform the following steps to stop this message from popping and check whether the problem is resolved or not.

  has. in the search box Type Device Manager start and click on enter.

  b. find now the option called Universal serial bus.

  c. now right-click on it and select search the hardware changes.

  Method 2 : run the troubleshooter of material and check if the problem is solved or not.

  Open the hardware and devices Troubleshooter

  Hope that helps.

• T110-107 "this device can run faster.

  Hi, when I move the lid I get the message "this device can perform faster" referring to USB 2.0. USB transfer rate is very slow after this message. Any ideas? Thank you

  Hello

  > "This device can perform faster" referring to USB 2.0. USB transfer rate is very slow after this message. Any ideas?

  You must update the chipset drivers and this error will disappear :)

• Satellite Pro A60 - installed Belkin Wireless but can't find a wireless adapter

  Hello

  I have a Satellite Pro A60, and late last year, I restored the disk hard as he saw all sorts of questions. After that it worked fine, everything fine, reinstalled outside the wireless card. I tried several times to reinstall my Belkin Wireless PCI card that slots on the side, but when I do (using the Belkin internet software make sure is the right one) it comes up saying ' found Incompatible driver version. Failed to load the application '.
  After restoring I reloaded the stuff about the tools and utilities disk (most of it anyway and all relevant esp network), after that I reloaded XP SP2 (would I have done that first?) Is this the problem?)

  Belkin card tells me that I have no adapters (huh?) but when I go to the information system there is no problem of devices and Im not really sure whats missing - clearly something is but that? Im not great with computers so would really appreciate the help!

  The device manager didn't show any problem devices.
  But the installed wireless card has been published in the device under network adapters Manager?

  The Toshiba recovery image contains a Wlan card and software driver Atheros Wlan Card. It is perhaps a reason for the problem, try to remove this software from the operating system.

  However, for me it looks like you used any compatible WLan card
  I discovered that the Atheros AR5001X Wlan card could be compatible

• IBM Thinkpad message: 'this machine can run faster with the USB 2.0 hub.

  Original title: Thinkpad USB 2.0 Hub.

  Hello:

  I have an IBM Thinkpad T-21 which is under Ubuntu & Windows xp.  I primarily use Windows XP.  The pop-up that keeps occurring is "this machine can run faster with the USB 2.0 hub.  Can you tell me how to upgrade my USB 2.0 Hub?  Would like to know because I can't sync my Android phone with my computer until I do it. Thank you.

  Are you sure you copied this error message properly?  In other words, he says that the hub could perform better if connected to a USB 2.0 port?  As far as I can determine that the T21 is not come with a USB 2.0 port, even if you connect a USB 2.0 device (for example a hub), the unit will only race as fast as the port allows it.

  What is the brand and model of your terminal?

  It is possible that the message means the opposite (i.e., your computer has a USB 2.0 port, but the hub is only a USB 1.1 device).

  USB 2.0 was introduced in 2001, so if you bought your computer before 2001, it is likely that you use USB 1.1 or 1.0.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the category of 'USB Bus controllers'.
  If you see the "Enhanced" work for one or more of the listed devices, you have a USB 2.0 port.  If you do not see "Enhanced", you have USB 1.1.

  

  If the problem is that the USB port on the computer is not 2.0, so your only solution is to buy a USB 2.0 PC Card adapter.  Example and example 2
  If the problem is that the hub is not 2.0, then you will need to buy a new hub.

• Compatibility issue on Satellite Pro A60-129 and USB 2.0 Port Replicator II

  It is: are they compatible? I bought the Port Replicator, loaded drivers and plugged.
  All the lights come on as it should on the 4 USB ports, and the device manager says its working properly. But if I plug the router in there (instead of directly into the USB port of the laptop), or if I try to plug in the mouse inside (once again, instead of directly into the laptop) or work.
  He also seems to have some effect on Windows - where when I try to stop the machine, it "hangs" in the section "Logging Off", until I physically unplug the duplicator.

  Any guidance appreciated.

  Hello

  I don't know what the problem is here, but you should try to download and install the latest available driver from Toshiba support page Package. You can find it under http://eu.computers.toshiba-europe.com > support & downloads.

  Product type OPTIONS
  Family CONECTIVITY
  Series of products DOCKS & DUPLICATORS

  You will find driver Package for Windows XP Home edition.

  By the way: perhaps some additional software for mouse blocks or a modem. Who knows

• Satellite Pro A60 crashes even, I don't run a lot of programs

  I have a laptop pro satellite A60 and I noticed that he hung up even if I'm not running a lot of programs, I often encounter this problem if I'm under ie and the only thing I have to do to turn it off by pressing the power button for a period of time.

  I just upgraded the RAM to 1 G to increase his performance, but I am facing this problem.

  need help
  Sam

  Hi Sam

  I put t knows how long do you use your OS and what is the insensitivity of the use. Many users install a lot of HS on it and later I was wondering when the operating system is not fast more.

  In this way it is not easy to say but I recommend to clean the system correctly and you will see if the situation will be better than before. Check all running processes. Maybe one of them makes demands on the CPU activity.

• USB can run faster on my Satellite Pro M30

  Recently my M30 Pro Sam tells me that he can run faster if I plug an external device - say a hard drive - on a socket USB 2. It then asks me to click on the ball to see a list of the 2 USB ports. Because I have 2 taken USB, and I thought they were USB 2 anyway I'm not the wisest.

  Any thoughts?

  Have you noticed the same thing by the use of different external USB devices? It will be interesting to know something on this external HARD drive. Is - this small 2,5 HDD or maybe desktop HARD drive with own power supply?

• This device can perform faster ".

  the prompt: this device can run faster ' custody arise and no device is connected?  No usb port has a hip device?

  Again, nothing is plugged into a usb port.

  each comment that the system continues to show me tells me to unplug the unit.  There is no device.  what Miss me?

  Thank you

  Go into Device Manager, there may be something inside your computer, not only a USB / external peripheral. Look for something with an icon of warning or something. See if you can see what's wrong, give a screenshot or two, and we can work from there :)

• USB port can perform faster pop-up

  I keep getting an annoying pop up that 'USB port can run faster. This must be an internal port that I get this when no external USB has anything plugged.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• USB devices not seen on Satellite Pro A60

  Hello

  I'm having a problem with my laptop Satellite Pro A60 running Windows XP Home: it is simply not to see all devices at all. Devices (USB, fan keys) are to be supplied with electricity, but I can find no trace of them on the computer anywhere. It is even not complain that they are not recognized - it's as if they were not there. I've uninstalled and reinstalled the drivers of hub USB root/controllers, but that has not helped.

  It is the latest in a string a glitches that can be helpful to know: a few weeks ago, the ATI Mobility Radeon 7000 IGP suddenly caused windows crash at boot time. I could just sort the problem by updating the bios and reinstall the ATI drivers (all toshiba). It is not of course the relevance, but after the bios update I also improved the 6 F-secure antivirus software. XX to 7.01.

  Usually, I try to get as much as I can by reading these forums but I'm not a guru of computing and on this one, I'm out of ideas - because Windows is not identify any fault, I don't even know what to look for on google... Someone has an idea?

  Thank you very much

  Philippe

  Hmm, you said that you have already reinstalled the drivers of USB controllers/root hub.

  But maybe you should try to make this again as a result of this procedure;
  -Disconnect all USB devices
  -go to the Device Manager and change the view to display hidden devices.
  -Open the tree of the USB controller and remove all controllers.
  -Restart the computer and wait until the OS has installed everything again.
  -Then plug the USB devices to the USB ports for laptop

  If this does not help, it would be desirable to recover the laptop with the Toshiba Recovery CD supplied.

  Good luck