Satellite Pro A60 would not work XP, but is fine with W2k

I bought my A60 as last year, worked well but oneday froze, tried to reinstall the OS using the product recovery disc. the procedure went very well and asked for a restart, but on reboot it froze again, I tried Pro Rec disc a few times, but with the same result.

Then I tried the fresh xp copy that also froze before installing the files. I am now using windows 2000 which seem 2 ran fine for a few weeks, but now I have no volume.
I have triede pilot plant but it still would not come. If im use it without volume, but I can't understand why would he not let me install the product or Win XP Recovery disk but would allow win2000 but without volume.

Please help me, thank you very much

Hello

It is very strange that this unit freeze after the installation of recovery. Please remember that no external devices are connected to the unit when you do this.
It will also be interesting if you have upgraded from memory.

Before using the recovery installation CD you can also try to set default values in the BIOS.

Tags: Toshiba

Similar Questions

  • The product key on my Satellite Pro P300 does not work

    The product key on my Satellite Pro P300 does not work.
    I entered the key from the sticker on the back of the computer. What I am doing wrong?

    Hello

    Why use this product key?

    Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

    Second, it's an OEM key and it will not work with other versions of Vista!

    Cheers mate

  • Satellite Pro M10 will not start again and comes up with the error message

    My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
    The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

    What can I do to get the notbook again reboot?

    Hello

    Seems that there are problems with the files of GoBack.

    Try to boot in safe mode and remove the Norton System works from your laptop ;)
    If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

    Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

    Good luck

  • Satellite Pro A60 does not supply power to the top

    Hello

    I have a Satellite Pro A60 and when I turn on the machine, the lights come on and the fan whirls for about 5 seconds and then the machine just turns off again.

    No matter if I have the battery or HARD drive in or not, the same phenomenon occurs.
    I guess it's problem of CPU or power supply Board, but I don't know.
    Is there anyone else who has had this problem and if so how is it resolved?

    Any help would be appreciated very with gratitude that I am out of warranty and need the laptop when you work from home.

    Thank you

    Hello

    I guess it can be a single processor or card mother related issue.
    If there is something wrong with the power supply for laptop card then the cell phone would not turn on, even for 5 sec.

    But it's only my personal suggestion to make sure what's exactly wrong check specifications should be necessary.

    So I think that a laptop computer technician should check it out.

    Good bye

  • Satellite Pro A60 does not illuminate

    When I try to boot my Toshiba Satellite Pro A60, seems to be powered. A few seconds later, there is a click and it cuts.

    I tried to turn on the computer with just the power supply with the battery removed, just with no power supply and battery and power, but none of these options are making a difference.

    I also tried to clean the fan in the aspirant from the outside by a suction pipe, but even once, it did not help.
    Can help you with the Please this problem?
    Thank you.

    Hello

    Turn the laptop over and unscrew the cover on the ram. Then remove the ram and try to turn it on again. If it lights, put the piston inside the laptop and try again. It does not turn on? Then your ram is dead. If yes then you can replace, or have your asp replace it. If this does not resolve the problem, there is a small plastic cover that runs along the keyboard just above the keyboard. Take this off and then unscrew the fixing screws to the bottom of the keyboard. Under the keyboard, you may have a second RAM slot. If Yes, try to remove the RAM stick and turn. It work? If this isn't the case, you probably have a problem with the motherboard. If it lights fine, then you have found the issue and can replace or continue using it without the extra RAM. Hope this helps and have a nice day.

  • Satellite Pro A60 does not recognize DVD-R blank disc

    Can anyone help?

    I've tried several brands of DVD - R, but also blank discs DVD + R on my Satellite Pro A60, but very few of them are even recognized.

    Pioneer DV - RW DVR - K13A is supposed to work correctly when I check the Properties tab.

    I tried to watch upodates but frmwre - na .zip was not allowed to work, the D drive was not considered appropriate...

    Help, please!

    Thank you

    Hello

    What exactly do you mean? Is the drive does not support content or there is problem if you want to burn data on DVD-R media?

    Can you please explain this a little more carefully?

    Just FYI: I use the empty media TDK almost 5 years and I can say that TDK is very good for this kind of things.

  • Satellite Pro A60 - CD/DVD works intermittently

    Hello

    I have a Satellite Pro A60, which is two years old. Recently, for some reason, the CD/DVD drive now only plays discs intermittently. I have to insert it several times before it will play. Some play at all.

    I used a disc cleaner lens several times, but it seems that to help on the occasion of the strange - that is to say, a drive can be started immediately after I used the lens cleaner, but this could just be a coincidence.

    I wonder if I need to replace the drive and, if so, how much that would be easy. The computer is out of warranty.

    Thanks a lot for all the helpful tips.

    Ron

    Hey Buddy

    It really looks like a hardware malfunction. Probably the lens of the drive can not calibrate correctly due to mechanical stress for a long time.
    Unfortunately, this anomaly cannot be repaired. The only solution seems to be a replacement of equipment (by car).

    Disc replacement is a little tricky. You know. Not all readers are compatible because of the different master\slave\c-salt settings. With the help of the player is not compatible, you will get #1 error IDE.

    That's why I really recommend contacting ASP in your country and ask the compatible CD/DVD players for your laptop.

    Bye and good luck

  • Satellite Pro A60 do not read CD

    Satellite Pro A60 - EN, reader of CD/DVD-RW reading high. Up til now read audio CDs, DVD video & MP3. Now stopped reading CD - R that were created elsewhere, two photo/word files and now MP3 does not read. Once stopped play CD audio Middle ripping today. Restarts the computer after the error report microsoft and fact then automatically have stopped ripping today.

    Laser seems clean, car not clear, no virus.

    Natrually outdated... warranty...

    Welcome pointers

    Hello

    Have you tried to remove the drive from Device Manager?
    Try this procedure. After restarting the OS should recognize the drive again.
    Maybe this will solve the problem.

    Good bye

  • Satellite Pro A60 does not

    When I start my Satellite Pro A60 I get the Toshiba screen, then it goes to a white screen and nothing else happens. I tried to remove the battery, disconnect it from the socket without success.

    I turned on the laptop and you press F12, but nothing happens, occasionally strange after the Toshiba screen, there will be a black screen with the words "Checking boot CD-rom" in the upper left corner and then nothing happens.

    Does anyone have any suggestions? If so could you please email me at [email protected]
    Thank you

    Hello

    Check please if the HARD drive is recognized correctly. Enter the BIOS settings and see if the HARD drive is listed there.

    You can also try to set the BIOS to the default settings and try using recovery media to see if the recovery procedure starts correctly (if the HARD drive is recognized properly).

  • FN + F10/F11/F12 in Satellite Pro U300 does not work

    Guys,

    need your help...
    I have the Satellite Pro U300 series and most recently the numbers four and six obtained busted... its does not work so I try to use the superposition of numeric keypad but I have observed that after pressing FN + F11 nothing happens...

    Please help me...

    Thank you
    <>

    Hello

    When you use FN + F11 small control LED must be lit and the keypad must be enabled.
    If your laptop is preinstalled with Toshiba recovery image this option SHOULD work correctly.

    So nobody here knows what you did with your laptop and why these options are not available more.
    Before you start with advice how to get this working again once please let us know what operating system is preinstalled on your Satellite Pro U400.

  • Satellite Pro M40X does not work with battery

    Hello

    I have toshiba satellite pro m40x laptop. It haves apromaly 11 months.
    In recent weeks, the laptop does not work with the battery.
    With the battery and the power running, if I turn on the laptop, it turns off after 10 seconds. If I only turn the computer batteries, laptop not respons.
    The laptop works without battery.

    I have rma is not the portable and the technical suport fixed the battery because it only 6 months guarantee.

    I'm sure that battery modules were not upset because I used the battery not very often.
    I disassemble and I wached the control circuit. I'm sure that something of them, it was broken, but I can't fix it without the schema.

    Another question is if I can change the graphics card to laptop. Is actually a x600se but I need power more graphic

    I hope you can help me

    gretings

    Hello

    It is not easy to say what the problem is here. Have you noticed something strange with LED power control? It is also possible that the electronic power supply do troubled. Try to talk with authorized Toshiba and explain the situation. If you open only one Notepad, uneducated, it may be simply worse.

    Graphics card cannot be updated as on desktop computers. I put t know how it is on this model laptop but the graphics card is fixed on the motherboard and cannot be traded.

  • Touchpad on Satellite Pro P300 does not work with Windows 7

    Hello

    Recently, I load Windows 7 (64-bit) on my Satellite Pro P300. I downloaded all the drivers for W7 64 bit and installed everything, fortunately, most of the time.

    The touchpad, however, is not completely functional. The upgrade page says to use the Vista drivers and did not provide any drivers for win7. Installing the Vista drivers didn't really go so well.

    In any case, the essential element of the missing features is this thing where you drag your finger up and down the right edge of the touchpad, and it scrolls for you. I can click and double click and move the slider. But I can't scroll. And it's such a pain with move the slider above the scroll bar of the application, with a big screen.

    Any help would be appreciated.

    See you soon
    '

    If I understand you right you are missing these additional mouse settings. Am I right about that?
    Which driver you have installed?
    Perhaps Synaptics driver?

  • Satellite Pro C850 does not work after Bios Update

    My satellite pro c850 cd does not work after updating the bios of toshiba.

    What should I do?

    Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
    Flash the BIOS correctly?

    Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

    In most cases a special disc of crisis of the BIOS would be required to operate
    Not sure if you can get it repaired by your own
    Check this thread. Maybe this helps:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

    Otherwise you need help of the authorized service provider available in your country.

  • My new Satellite Pro L300 will not work

    I bought a new Toshiba Satellite Pro L300 on eBay. I connected all the cables according to the installation guide. At first he asked my details, then I logged in and it went to a pages where he says he was preparing. Then I was sent to the newspaper in the section, and the same page appeared saying that he was preparing.

    After what happens about 5 times, he went to a black screen where the only thing I could see was my mouse cursor.

    I closed and restarted, I tried to go into the settings using F12. I was not able to work at all, no matter what I do.
    Unfortunately, I don't have a CD of the OS, but it was announced as having Vista as OS and have Microsoft Office Suite on him as a built-in wireless modem, so it was supposed to be ready just to turn it on. Well I can't even turn it on.

    What should I do? How should I do?

    At first, I must say that F12 has nothing to do with all the settings.
    At this point, I recommend using the new operating system installation using the HDD recovery procedure.
    How to proceed as a result of this document, you can find > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

    When the OS is installed and started up properly first thing you need to do is to create the disc of recovery facilities. "You can do it using preinstalled" Toshiba Recovery Disc Creator. The shortcut is placed on the desktop.

  • Satellite Pro U200 - speakers not working not

    Help, please. My u200 speakers do not work and neither will be taken for the speaker in the front. Check all volume levels and they seem ok.
    Checked the drivers and they say they work but still have no sound! What do I need do have execution of ideas.

    Thanks in advance.

    Hmm maybe the sound chip was defective. This can happen if there is a surge of the ports (such as bad weather or a high-powered device connected to the audio port).

    I would like to send the laptop to an ASP for a quote.

Maybe you are looking for

  • Problem of airtime with 10.0.1

    After updating iOS 10.0.1, I can't stream music to KEF X300AW for iOS devices. Does anyone have an idea or suggestion? Thank you

  • Problems with connecting fiber and new router AirPort

    I installed the fiber optic connection to replace my cable modem connection... I have a network of airport for a long time. When I bridge router ISP in my airport network that there are multiple problems. The major is that when you plug the ethernet

  • What channel will write first?

    I use series commands to control motors, and the sequence of commands are written in the motor controller is important. In the general structure shown by the attached vi, will be 'String' will be written 1000 ms before '75 "? Alternatively, will the

  • How can I back up my computer, and then delete the unused programs to speed up my computer

    would need a guide step by step for me to do it properly.

  • Movie Maker - titles

    Just finished a movie, before the first scene that I already have a title with the name of the actresses. If I add another title at the beginning, I lose everything that is already there in the beginning?  Also, I can not in good enough shape in the