Satellite Pro C50-A-153 does not not turn on more - overheat?

LS,
A week ago I bought a new laptop, a Toshiba Satellite Pro C50-A-153.

Last night I was watching some micro-credit (looking for a new holiday) and I noticed that the laptop was overheating.
I hit the market / stop butten and it turned of... later.
And now the computer lights no more.

_Situation: _
laptop was placed on my table, completely cleared of any blokades for air intake.
The table was heated. Now after hours of reflection, the computer does not work.
With or without power line in it.

What should do?
Erik

Hello

Let's hope that Timox tips might work for you.
In case of workaround won't help you, I would say that some hardware is dead, and so the laptop does not power and more.

What part of material likely to be affected? Hmm, in the worst case, your motherboard is faulty.
But I think first of all that some less expensive parts need to be checked for example RAM modules.

RAM failure would prevent the laptop to boot and so I would check the modules first.
I don t think there is something wrong with HARD drive because even if the HARD disk is defective, the device turns on but could not start the system.

But it's a new laptop... so don't replace anything. The guarantee is valid and in the event of hardware problems, the guarantee must cover the laptop repair.

Tags: Toshiba

Similar Questions

  • Satellite Pro C50 - A - BT does not work on a machine virtual Windows XP Home edition

    Hi people,
    We bought a C50 - A Pro of the Satellite with windows 7 installed to run a specific industry software that will work on win xp. We are running xp on a virtual machine that is installed.

    The problem we have will connect to a specific device by Bluetooth. While we are not very tech savvy, we are able to connect this device to other computers running windows xp, 7 & 8 use Bluetooth Assistant.

    The laptop can find the device to set up a connection, but does not connect (we used the same method on other laptops with success).

    We have v9.10.11 (t) of installed Toshiba Bluetooth stack. We were in the guide-utility Toshiba Bluetooth and checked for the updated driver but are always blocked.

    Can anyone tell if there is something specific to the Toshiba we have not been able to identify? Assistance would be greatly appreciated.

    Best regards, evil.

    > The laptop can find the device to set up a connection, but does not connect (we used the same method on other laptops with success).

    Any news? Have you found a workaround?

    I don t use the virtual machine and to be honest I m not very well why you can not connect to the other BT device but in my opinion the question isn't associated with the battery of Toshiba BT from the stack seems to work correctly because the BT device is recognized properly.

  • Satellite Pro C50-A-153 - Touchpad does not work properly

    First, sorry for my bad English.

    I have a Toshiba Satellite Pro C50-A-153, the problem is its touchpad and not work correctly, the mouse does not move when I move the finger on the pad, it seems that if I had to roll the bar "or the mouse wheel.

    Sometimes, the 'mouse' works for 20 seconds and then again the same thing. An external mouse works fine.

    It is not the problem of the functions "Fn". I tried to stop, reset the battery and press the power button to 50seconds. I also tried to uninstall the drivers for the Touchpad, and I think that I tried to change all the properties on the 'Control Panel - mouse'.

    Can someone help me with this?

    Thank you.

    On most computers laptop Toshiba is installed the Synaptics touchpad driver. With this driver, there are available additional touchpad settings. Try it please change these settings and turn off the features you don't need.

    How to do that you can read on https://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm

    Check it out.

  • Satellite Pro C650 - cooling fan does not work

    My Satellite Pro C650 overheats and stops automatically within 20 minutes of leaving upwards. I checked the CPU fan and noticed that it does not turn upward, even if the laptop would become very hot. I tested the fan with a 9 volt battery and it works perfectly.

    Can someone tell me exactly what the problem is? And how to solve it.

    Thank you.

    > Can someone tell me exactly what the problem is?
    On this virtual path, no one can say with certainty what the problem is. We can only speculate what may be the problem.
    Usually, cooling fan starts immediately after starting the laptop slows down and offers the optimum temperature of material. After reading your ad I didn t understand how it works. He turns and there is no sign of life?
    Problem can be power.
    Cooling fan will be controlled by sensors of temperature and activity depends on the temperature of the material but if your machine cooling fan does not work, I imagine that there is no electric power.

    What do you think?

  • Satellite Pro L850 - keyboard / touchpad does not work

    Hi all!
    I just bought new Satellite Pro L850 with windows 7 64 bit on a recovery partition.
    I have a big problem of internal cause keybord does not work under windows. In the bios, I can do anything I want. But the first configuration of windows (I can not deal with same user name and the name of the computer), keyboard does not work. I own windows version (with programs toschiba - recovery partition).

    It seems that this is not a cause of hardware under the work of bios keybord problem.

    Extra I have updated the bios last version 6.50, but not noticed any changes.

    Please help me with this question, cause I don't have any idea what to do now.

    Good day and w8 for answers

    PCZ

    PS. external keybord on usb work!

    Post edited by: pcz

    The whole story seems incredible. Keyboard and new laptop does not work?
    Install the check and image recovery again if the situation is the same. If the problem persists contact your local dealer, explain the situation and ask for Exchange.

  • Satellite Pro L450D - web application does not yet

    Hello

    My toshiba Satellite L450D Pro does not work yet.
    Please I need a link to download a new one please.
    I have tried several sites but all proved abortive.

    Here you can download all drivers and software for your laptop model:
    http://EU.computers.Toshiba-Europe.com-> supported Downloads &-> Download drivers

    You will also find the webcam software.

  • Satellite Pro P100: remote control does not not-> error ' cannot be read handle. ".

    Hello

    My Satellite Pro P100 began to show the error "Failed to read handle." at startup. I found a related post and removed from the area of registry Toshibarc.exe control startup programs. This does not prevent the pop-up dialog box, but now my remote does not work.

    Does anyone know if toshibarc.exe must run for the remote control work? And if so, how do I fix the error in the program (rather than simply removing from the register). Could this be a hardware problem?

    If I try to manually run the C:\WINDOWS\SMSC\CIRHID\V1_0_0000_0\toshibarc.exe, I get the same popup "Impossible to get read handle.".

    Thanks for any help or ideas
    Steve

    After a long period of investigation in the internet and visit many Web sites, I discovered that the ToshibaRC.exe file belongs to the Remote Application from Toshiba. It seems that the file is required to use the remote on the laptop...
    But I can't give you a reason why it causes an error.

    I found this similar thread in the forum
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16959

  • Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

    I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

    Hello

    All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

    Order of the facilities is as follows:
    -Windows XP
    -Display driver
    -Audio driver
    Toshiba - common modules
    -SD Card host driver
    -SD Card Driver
    -BlueTooth Stack
    BlueTooth - Easy Connect
    -Mouse driver
    -Modem driver
    -LAN driver included with Windows XP
    -Infrared driver
    -Toshiba Power Saver
    Utilities - Toshiba
    Toshiba - post Mobile
    -Toshiba Console worm.
    -Toshiba Hotkey for display devices

    I hope that you will be able to install Windows XP Home edition successfully.

    Good luck!

  • Satellite Pro 2100: Quick fix does not work with Win XP SP2

    pilots quickfix for win xp on my toshiba satellite pro 2100 does not say pilots should xp without service Pack 2.
    Are there drivers for Windows XP service pack 2?

    Please do not mix the pilots and quickfixes. Install Windows XP SP2 home edition on your laptop, install the drivers for the chipset, screen, sound, LAN and other hardware components.

    When you are finished connect your laptop to the Internet, make windows update, restart your computer, and enjoy your life.

  • Satellite Pro P300-1AY: Vista does not display computers XP network group

    On my show w Satellite Pro P300-1AY with Vista, my old XP computer is not always displayed in the list of working groups.
    On my old XP computer, I still see the new Vista computer

    Can you tell me why the Vista computer not always displays the XP computer in the network group?

    On the commputer of Vista, I traced a directory on the XP computer and it will connect even though the task force list does not show the XP computer under the list of networks

    Hello!

    Have you disabled the firewall on the XP computer?
    Maybe a 3rd party security software is blocking it.

    Check the registry and go to:
    HKEY_LOCAL_MACHINE es\lanmanserver\parameters
    In this case don't Scream no entry with the name of Hide.
    If you have such an entry, delete it.

    Good bye

  • Re: Satellite Pro S500 - brightness adjustment does not work correctly

    On my Satellite Pro S500 (preinstalled Windows 7 64-bit) change the brightness by pressing FN - F6 or FN + F7 does not work. The other NF - f... combinations seem to work correctly.

    When I press FN - F6 (or F7) a control box to change the brightness to poster (as expected), but the level is still displayed as "1" independent of the current value (for example changed from Control Panel or with the eco utility) and it is not possible to change it with FN - F6 or F7. I just reinstalled vap and restarted the computer, but nothing has changed.

    Hi asdf.

    I put t know what s wrong exactly but normally the FN keys are associated with value added Package, but you wrote that you already reinstalled

    In my opinion, you should try a system restore to an earlier point. Maybe something messed up the registry, you can start System Restore in Windows Advanced Boot menu.

  • Satellite Pro L350 SSD upgrade does not work

    Hi all

    I'm trying to upgrade a Satellite pro L350 with ssd, currently I try with an ssd samsung 830. I've already updated the bios to version 2.2, but it doesn't work. Can someone help me?

    Concerning

    Mike

    and what exactly does not work?

    The SSD is recognized by the BIOS?
    Have you checked if the SSD has need of a firmware update or if a firmware update is available

  • Satellite Pro L300-PSLB1E: XP does not control the wifi to the power connection

    * + Hello + *.

    I have a model Satellite Pro L300-PSLB1E and a XP Professional SP3 on it.
    Already everything works because I had a compilation of drivers copy of the past.

    The problem is that XP does not control the WiFi works without danger the and it disconects when I close the lid.

    So I tried with the power that said safety program to:

    Bq. [06/04/08 Power Saver Toshiba Windows XP 7.04.02I | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpwrsav-es-20080519173239.zip] + doesn't work-error 0 x 0 +.
    And I tried also with the thought of program Toshiba wifi on 32-bit compatibility:
    Bq. [Intel PROSet/Wireless Software | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpro-ncs-20080416140552.zip] + doesn't work too-Said controller is not installed when you and full work +.

    So, how to control the peripheral power turn off on?

    Bq. * + thanks for your attention and patient. + *

    Hello

    Firstly the Toshiba Power Saver requires the installation of the common Module.
    The common Module for Win XP v1.00.05 can be downloaded from the European pilot page Toshiba.

    So before installing the energy saver, install common Module, restart the computer, and then try the energy saver.

    In addition the Intel PROSet/Wireless Software can be used only with the Intel Wlan card.
    Is the laptop supports the Intel wireless network adapter?

    AFAIK the L300 series can be equipped with a Realtek, Atheros and Intel Wlan card
    Check it!

  • Satellite Pro L20 - Fuction key does not

    Hello

    I have a satellite Pro L20 running xp pro. We use at the school, connected to a projector to display on the screen for children to see.

    the problem is that we use the Fn + F5 key on the laptop to scroll the screen option (two screens or not) but nothing happens, it seems that it does not meet our request. and the projector read no source found. Some days she turns on automatically, but when it doesn't. We are stuck, I tried to look into the display properties, but nothing here to try n force both screens light up. Help

    Azab

    Hello

    Also try switching to the external device settings Intel. You can find it under Advanced display settings. I also recommend you to reinstall the TOSHIBA utilities. I'm not 100% sure but it may be responsible for the function FN + F5.

    Also check Toshiba HWSetup under the view tab. Activate LCD + analog RGB option.

  • Satellite Pro 6000 - new RAM does not work

    Hi all

    New to this forum sorry if this was asked before, I did a search but could not find anything so here goes.

    I just bought a new RAM for my Satellite Pro 6000. When I install it nothing happens the laptop won't boot. If I put the old stick in no problem. The ram I bought is unb 512 MB PC133 CL3 and old RAM 256 MB PC133s. I think little small to read with these old eyes.

    I was told I might need an update of the BIOS but cannot find one for my laptop under 1.4 for the moment.
    Any help would be thank Lindsey

    I think that the new RAM is not compatible with the motherboard or laptop.

    The manufacturing of the new RAM you said does not for me so I would buy an another RAM, such as Kingston. Kingston makes high quality RAM and many users here buy Kingston RAM to upgrade its RAM.

    By the way: do you use the RAM or only the new? Normally, if you use two memory modules live, you must use it with the same specifications.

    The update of the BIOS, you can find the Toshiba site, but this doesn t affect the compatibility of Aries.

Maybe you are looking for

  • error message on the exchange of mail

    Have a client with an iPhone 6, who have left their jobs recently (6 weeks ago), she has an iPhone 6.  When you send an error message when on the phone it needs to connect to the Exchange.  She wants to be able to access old emails to view on his pho

  • How long is the Apple support its routers for?

    Basically. I'm looking for a new router I would like to know how much time Apple support their routers for, I know bugs and security flaws are found quite often so I would like to know how long it will be before a router would stop receiving updates

  • Solid State Drive upgrade

    I have a HP Envy Phoenix H9-1350 with 12 GB system memory, disk hard 2 to and put in cache THAT SSD 16 GB and I would like to improve the performance of the system, because it seems to be I/O bound.  I think a new SSD would be a good solution and I t

  • satellite 2410: problem with recovery CD

    I had problems with laptop computer virus and decided to use the recovery cd At the end of installation, I get the message extraction failed and that there are currently no operating system on the laptop. How can I fix this problem?

  • help adding a 2nd ssd drive ro 700xt HP ENVY

    How do you add an SSD as a second drive to the HP Envy 700xt?