Satellite Pro C660-1 t 1: not able to play 3D games

Similar Questions

• Not able to play card games. At the opening of the game as the question comes back: application not found

  Windows Vista. It was working fine, but something happened and I'm not able to play card games.

  Hello

  Assuming that it is that the integrity of the games that you play on the start menu, i.e., solitaire. etc. etc., you can follow the link below to fix this problem:
  http://support.Microsoft.com/kb/972035/

  If it's another game then let me know.

  All the best!

• Satellite Pro C660-2JR - wifi is not connecting

  Hello

  I just bought a laptop Satellite Pro C660-2JR for my daughter, the unit works fine on lan cable, but not connecting not wireless.
  Wireless indicator shows an intense tone, but when I click on connect after that 10 seconds, it says connected failed.

  The network settings are correct (I checked with two other computers that connect without problem), the pc is running x 64 win7. on the toshiba site there is no drivers listed for the local network, I downloaded and installed the drivers from realtek realtek Web site, but no difference.
  Is this a problem with x 64?
  I've tried the recovery disks

  Can anyone help?
  Thank you

  Rob

  On this virtual path, it is not easy to say what the problem is, but there must be a problem with the WLAN settings I guess. What else? Your laptop can detect your router. Question is: what router do you have, what WLAN standard do you use, and you have WIFI password or not.

  Have you tried to reboot your router and check again?
  When you unlock your router you have the same problem?

• has been able to play gta vice city and san andras and now I changed the frm windows XP to 7. but now I'm not able to play another game

  original title: card__ graphic

  I was able to play gta vice city and san andras and now I changed the frm windows XP to 7. but now I'm not able to play any other game m .is it probkem of bone or my graphics card?

  -----------------

• Not able to play the game Metro 2033 on Windows Vista-based computer.

  I just installed the game Metro 2033 on my Vista system that uses a 1080 screen.  In fact, I have two identical screens.

  The game requires activation Steam and Steam normally will attempt to update the program rather than simply enable it during installation.  This leaves a person in the dark as to what happens during the installation.

  It turns out, I use a 3G modem that Steam refuses to support their network of Bit Torrent, so download speed for an update of a concert is around 12 kb/s or 8 hours to make the point on a program that has not yet installed.

  After work, I was quite surprised to find that the program would not go on Steam.  He then took a few hours to find out that there is a solution, that I could load the game by running the executable file that had been installed in the directory Steam for Metro 2033.

  Unfortunately Metro2033, when started this default way a unknown screen resolution.  Thus when the game is started from the Steam directory nested, one gets a message "out of range" on the display of 1080 and nothing can be seen.

  Short of launching the game out, I tried the game again, to my great joy, the second run displays a safe mode issue and I ran it in safe mode.  It is quite an exciting game and I played it all night.  However, I had also contacted support original THQ regarding installation problem/solution.

  Then I fell asleep.  The PC was on.

  The next day, I played the 2003 Metro game again, but I entered in some difficult areas of the game, and I had to reload the saved game.  After awhile, I opted to exit the program.  Later, I started the program, but this time I inadvertently clicked on the Metro2033 icon who had installed Steam.   In my solution, I had pasted a link to the directory of Steam under the original icon and had pressed the wrong button.

  Of course, the first thing I saw, after playing the game for 12 hours, was "out of range".  I opted to return to the office...

  ... However I couldn't come back on the Vista desktop.  I have a 7000, and even Microsoft Entertainment keyboard by pressing the buttons of Windows or Media center wouldn't let me come back to the office.

  The day before, I needed to do this that I've experienced to workaround to start getting and I noticed that the only way I could get on the desktop to run the Task Manager to kill the out of range on my screen message has been to press the Media Center button.

  Once the Media Center menu on breaking the subway 2003 menu I could then enter the office and use the Task Manager.

  However, the next day when I inadvertently started the STEAM version, and again, the screen is become black and says 'Out of Range', I found that my system was stuck in this loop.  No way to get in the Manager of tasks at all, not even with the Media center button on my keyboard.

  Now the background of my question.  When I was forced to start my system again, I noticed the normal BIOS screen and the bar of Vista with Vista is loading, then the familiar sound of Vista boot, but now NO SCREEN at all on startup!  Now, something had inserted a driver in my Vista start which forced my display say "Out of Range" from the start of the desktop of Vista and Vista computer has not yet noticed this.  Normally, I would think that they claim that the screen resolution is wrong and put it on, instead, nothing else than the out of range message rigid or flexible boots.

  Original title: can someone tell me what happened here? Metro2033 and steam game.

  I checked by plugging my second monitor.   The system has Safe Mode startup and I was able to do a restore of the system from the previous day to evening to return to the office.   However, I am quite confused as to what happened.  How the Metro 2033 problem "out of range" migrate to Windows startup by running an update of Steam?

  I use the latest service pack for Vista.

  
  

  It seems that the STEAM snuck in an update and then everything worked fine.

• I bought the haunted mansion, Queen of death with a code of couipon, and it shows on my computer that I did, but I was not able to play the game since. He continues to tell me that's not activitated.

  I was playing the trial version of the haunted mansion, Queen of death.  When the trial was over I decided to buy the game with my promo code, I did.  Since that time, I was not able to connect to the game.  He says that when I tried to reinstall as I already have the game, but it won't let me play.  Why not?

  Your question is the best answer in the forum of the game located here: http://forums.bigfishgames.com/forums/show/2639.page

  J W Stuart: http://www.pagestart.com

• Not able to play the game of hearts in XP

  I was trying to play hearts and all I get now is close try recovery, I did it and still nothing is no problem with the heart of the game, I can play other games.

  Hello

  1. What is the accurate and complete error message?
  2. you did it before the issue of any material changes or software?

  Method 1: Please boot your system to the boot and see if the problem still occurs in this mode. Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Method 2: Delete the game of hearts, then add re using the XP reinstallation disc.

  How to add or remove games in Windows XP:
  http://support.Microsoft.com/kb/307768

• Not able to play the game error parental controls restrict this racing game

  Original title: Parental controls restrict this racing game

  I can't play a game on my computer.  It is rated E10 +.  Whenever I insert the disc, I get the error message: "Parental controls restrict this racing game."  I use the Vista operating system.  I am also administrator on the computer.  Due to the age of my children, there is no need to implement password protections.  I wasn't aware that there was no set parental controls on my computer.

  Just had a conversation with a customer with the same problem.

  Found a solution for this:

  http://disneyinteractivestudios.custhelp.com/app/answers/detail/A_ID/3703/~/Disney-universe---error%3A-%22parental-controls-restrict-this-game-from-running-on

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Re: Fn key does not work on the Satellite Pro C660 2TQ

  Hello

  I bought laptop Satellite Pro C660 - 2TQ PSC0RE - 01801QGR 2 days ago and found the Fn key does not.
  Someone help me to activate it?

  Hello

  Select all programs-> Toshiba-> Flash cards, and then restart this utility.
  Now if you press Fn + F8, you should be able to turn on or turn off the WiFi.
  The FN + F9 active needs or disable the touchpad.

• Satellite Pro C660 does not illuminate

  Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

  any suggestions?

  Hello

  On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
  After doing this connect the power running and try to start again.

  What happens when you do this?

• "SHIFT" on the Satellite Pro C660 key does not work

  G ' Day,.

  I have a little problem with my laptop Toshiba Satellite Pro C660.
  Unfortunately I had to remove the keyboard and thus dislodged the
  fragile plug to connect to the computer.

  The 'Shift' key refused to work since. All other keys work as usual.
  The only problem is the 'Shift' button does not.
  I tried to gently move the plug but made no difference so now have to
  Use a USB keyboard.

  Can you please help with suggestions for this problem?
  Thank you for your time.

  See you soon,.
  Sunrap.

  I really put t know what you think when you know that there is no connection for each unique key, but for the entire keyboard.

  To be honest I ve changed keyboard several times but never noticed this problem.
  Are the two SHIFT keys off function?

• Satellite Pro C660 - Synaptic Touchpad pinch zoom partially does not work

  Hey there,

  The laptop I have is a satellite pro C660 2I. I've had my laptop for a year (ish) now, and he always had this 'problem '.

  The touchpad has the ability to "pinch" which allows the user to zoom in or out using 2 digits on the touchpad (i.e. move the fingers together to zoom out).

  Unfortunately, the touchpad recognises 2 figures as being present when I use only one finger, but only when I use the right side (or two-thirds of the pad from the right).

  This made me think that maybe he was dirty, greasy etc so I cleaned and nothing has changed. I tried to uninstall the driver, reinstall / update... nothing. The strange thing is that it seems to work for approx. 1 second after I apply pressure to the left hand side in a movement of friction and then use the right side. This leads me to believe that the left side is * being constantly recognized as in use even when it is not *, but I don't know why.

  I do that anyone can recommend?
  Open the laptop and clean it?
  A component failed to be replaced? A software update?

  I'm at my wits end with this laptop, and this is the only problem... is so constant now that the pad is almost unusable (deepened over time, but it wasn't a big deal at first).

  Thanks in advance,
  Griff

  NOTE: If there are all the technical information required, please treat me like a cave man / technological invalid. I am somewhat qualified but I would rather patronisingly simple instructions as sending unnecessary information to those who are trying to help me lose some time.

  Perhaps your question describes isn't related to a dysfunction of the touchpad, but on the fact that the touchpad supports the dual mode functionality.

  + How do I enable or disable the Touchpad double mode +.
  http://APS2.toshiba-tro.de/KB0/HTD9702NL0000R01.htm

  Check if there is a difference with the touchpad on or off dual

• Satellite Pro C660 is not commissioning

  Hello
  Deploy a satellite Pro C660, who decided that he no longer wants to start.

  When you press the power button, the green light turns on and the fan begins to hum, however, the laptop does not have to go through the routine of the POST and everything turns off.

  I checked the RAM Modules and the HARD disk automatically to the poor in the hope that the problem is simple, but nothing helped.

  I managed to start the laptop previously now CTRL + ALT + DELETE, when it has sprung into life. But this trick works now is no more. I also tried waving the F12 or F2 key at startup, but the laptop won't always start.

  I should mention that this laptop is not very old, less than six months, but if there is a simple solution as an alternative to return, I would like to try rather than the first!

  Hope someone has a solution?

  To these questions there is not some sort of magic bullet.
  The description of your problem is OK, but we don t know what you don t in the past.
  This problem doesn't happen for no reason and maybe something you did can be responsible for this.

  Looks defective BIOS so can you please tell us since when you have this problem, and maybe you tried to update the BIOS in the past?

• Satellite Pro c660 does not connect to another wireless after format

  Hey all,.

  I have a Satellite Pro c660 and bought a copy of windows 64 bit with him - the laptop come with many software from toshiba on what I wanted really, I therefore installed windows 64 bit (fitness in the process).

  After the Installation I had some problems connecting to my wireless home (he was missing drivers, but have now install) but finally got it works.

  After having taken it round my friends last night, I could not connect to its wireless - the password has been good and I could see the network, but he just kept constantly defect - its network was on it, because his cell phone he was performing. -The only difference between its network and the spirit (that I can see), it's that she was using the TKIP encryption to connect, while I was using AES (my network card is Atheros). -Even when I tried to configure a network profile and have it automatically connect (using the same information she used, including the TKIP encryption) - it was always not.

  The ideas people? More missing drivers?

  PS - I really don't want all that toshiba nanny software on the laptop.

  Thanks in advance!

  > Any ideas people? More missing drivers?

  If you can see the Wlan network then it means that the WiFi adapter driver is correctly installed and the problem is between the router configuration problems WiFi and wireless network card.

  Are you abele to connect to other networks wireless at home?

  Please disable encryption settings in the Wlan router and try to connect to the Wlan that is unprotected.
  But note; This must be done only for testing purposes!

  You should also check if the MAC address filtering is disabled in the settings of the router.