Satellite Pro C660-1J3 - problem with OpenGL / Edrawing

Similar Questions

• Satellite Pro C660 - keyboard problems

  This issue is one for computer laptop Toshiba Satellite Pro C660-1UX running Windows 7 Home Premium Service Pack 1.

  Some of the keys on Board (E, T, U, I, O, A, B, N, and the Enter key) fail to register.
  All keys tested so far seem to register normally.

  When you connect an external USB keyboard, all the keys work properly. When you use the integrated keyboard or external USB keyboard, however, pressed some key is selected for about 2-3 seconds so that his character register. This makes typing incredibly slow and is naturally unacceptable.

  I checked the Manager of devices looking for errors, but can't find one. The keyboard driver is classified properly installed and functional, and driver update indicates that the latest version is in already in service.

  I've also scanned for viruses using Spybot and Malware bytes and also with laptops own antivirus software pre-installed. All the analyses of the entire system refer a none found the message of threat.

  I read that the keyboards on these machines can sometimes be problematic, which could respond only to edge, some function keys. The fact that all the external USB keyboard keys work seems to confirm this. However, the fact that the keyboard both onboard and external is affected by the same slow pressure might also suggest a bios problem - but that this laptop computer is several years old and working perfectly, why bios suddenly would cause this problem.

  I visited the Toshiba site and based on this laptop with the part number: PSC0ME-02100SEN, I have concluded (rightly or wrongly) that the correct bios download version is 1, 70 - WIN, only when I read the following installation instructions http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm bios
  I became quite concerned, like installing the bios update seems far from simple.

  Does anyone know if it is possible to download and install the bios right through an update automated versus manual download and installation step by step, which, if not carried out as planned, could make the laptop completely unusable.

  Has anyone reading this post experienced similar problems with this make and model laptop and was able to return successfully to the good operating condition. If so, how?

  All constructive advice would be welcome.

  > When you connect an external USB keyboard, all keys work correctly.

  This means that the keyboard controller is OK and the internal keyboard is defective.
  To resolve this problem of keyboard, internal keyboard needs to be replaced.

  > However, the fact that the keyboard on board as external is affected by the same keypress slow could also suggest a bios problem - but this laptop computer is several years old and works perfectly, why bios suddenly would cause this problem.

  Hmm I n t think so
  The keyboard delay can be bound to parameters.
  You can check this in the control panel-> keyboard

• Satellite Pro C850 - strange problem with LAN connection

  Hello world

  I just signed up on this forum because I hope you guys can help me with a really strange problem.

  I recently bought a Satellite Pro C850-1MX
  It came with Win8, but given that I don't really like Win8, I bought an additional Windows 7 Pro (64 bit) license and installed on the laptop.

  The problem I describe, also arrived on 8 to win, which makes it even more strange.

  As soon as I connect a cable to the RJ-45 port, Windows tells me, that the LAN connection is not connected.
  As soon as I unplug the cable, Windows starts looking for a network and actually found one!

  So, the only way to connect to my LAN cable is... I have activate the LAN connection, wait that it detects a network (without the cable connected!) and meanwhile to connect the cable to the network port.
  Now... If I disconnect the cable once again, Windows still shows its connected.

  I must say, that I am a Director of professional network for more than 10 years now, so I should know my systems, but this never happened to me before. Event log shows nothing, re-installing drivers did nothing either. IM quite confused here and I hope you guys can help me.

  Thanks for reading, and let me know if you need any additional info!

  Greetings from the Germany,
  Sandro

  Hello Sandro,

  To be honest I confused m.

  I would try to start talking about the drivers installed, since you changed the system for Win 7.
  All the network devices, such as card WLan and LAN card are properly recognized in Device Manager?

  As I m not wrong not the laptop was equipped with a network card Realtek-8111F (1000BASE-T/100Base-TX/10Base-T) and WLan RTL8723AE Realtek b/g/n card.
  If both should appear in the device properly Manager if you have installed the drivers correctly.

  2nd question:
  You said:
  > As soon as I unplug the cable, Windows starts looking for a network and actually found one!
  Are you sure that you speak of LAN and WLAN?
  For me it made no further since. If the network cable is unplugged, the notebook would connect to the WLan where WiFi is enabled.

• Satellite Pro L850 1DR - problems with Windows 7 update KB2887069

  I have problems to install the KB2887069 update.

  It seems to install OK... prompt me to restart... when I do it, says it configures... GETS to 7%, then starts rebooting... watch it configures again... up to 7 or 9%... and then reports it is defect and restoring... restarts again... and it is quite... not installed and reference to Windows Update confirms it failed.

  All the other updates I had installed today very well once I realised KB2887069 was the problem and failed to update.

  I am running Win 7 Prof Serv Pack 1 64 - bit on a Toshiba Satellite Pro L850 1DR. I use my AV Microsoft Security Essentials software.

  For now I had to hide the update... but all of the bright ideas how overcome the problem. I tried the Microsoft site, but there is still no answers who brought a solution for me.

  Thanks in anticipation!

  I googled around for KB2887069 update and it seems that you are not alone with this problem to Microsoft Update. I also found your request in the forum, Ms.

  In other words, that's not a problem of mobile by this must be resolved by Microsoft.

  I read in the MS forum on this issue and this issue is still under investigation.

• Satellite Pro A10 - Wifi problem with router ZyXEL

  Hello

  I recently acquired a Satellite Pro A10 (PSA15E - 0115Q - EN) off the coast of the friend. It doesn't have a wireless card installed, but I managed to take of a Lucent MPC13A-20 that was installed without any problem, and it is recognized as a Toshiba Wireless LAN Mini PCI Card. However, despite the computer being able to read my neighbors wifi (next door and in the apartment on the floor), he refuses to acknowledge my router, even if I'm in the same room. My router is a ZyXEL P-660HW-T1 v2 which works very well (I tested it with another laptop).

  Can someone please help!

  Thanks in advance,
  Fred

  Hello!

  Make sure your router is using a WiFi standard that supports your card. If you use 802.11n you should drop down to 802.11 g for the tests.

  In addition, you should check the channel of your wireless network card. It should be the same as the router.

  Good bye

• Driver monitor with XP on Satellite Pro C660-2CN problem

  I get 2 monitors Plug-and-Play - 1 ok, the other cannot start (Code 10)

  The laptop is also not go into sleep mode.
  The display turns off standby mode, but the laptop can be used.
  I also have an error ACPI event ID: 43 - the system sleep operation failed.

  Unfortunately no driver XP for this laptop.

  I think that this could be related to incorrect Graphics Driver installed.
  Device for my integrated graphics card ID is:
  PCI\VEN_8086 & DEV_0116 & SUBSYS_FC901179 & REV_09

  I am currently using Intel HD Graphics 6.14.10.5384 - the pilot didn't say not that there problems in Device Manager.

  Device ID for my Plug-and-Play monitor that will not start:
  Monitor\LGD02DC

  Has anyone installed XP on this laptop and if so what graphics drivers they use.

  Hello

  PCI VEN ID and DEV ID may be useful in order to perform a search on this page:
  http://www.PCIDatabase.com/

  The laptop seems to be equipped with Intel HD graphics chip 3000.
  If the drivers must be compatible. You must also install the Mobile Intel HM65 Express Chipset for Win XP driver since this chipset is part of the motherboard.

  But its interesting that you said that an external monitor work correctly and the other doesn t you try to use two external monitors at the same time?

• Satellite Pro L500-12F - problem with CD/DVD player and screen

  Hello...

  I have a few questions on my laptop...

  1. is it normal that the DVD rom on some DVD/CD it is very noisy and vibrates a lot, spesialy on older CD

  2. the lid of my laptop when I close its kinda not in harmony with the rest of the pc it is not fully aligned, but it's a little difficult to see wait when you look for it... but its good on and what is not lost or anything just not setting for the "body" of the laptop

  3. the cover still once, under the screen where the cover is mounted on the 'body' off the laptop so... It is not glued to the screen as the rest of the rolled edges it is right next to him that you can drag into it, so you can see the wires enter the screen etc.
  is this normal?

  -Thank you

  Hey Pedersen37,

  (1) maybe your old CD's doesn't work correctly. What happens if you try the same disks in another computer?

  Regarding your display/cover problem if you mean that you can see the cables that they go into the screen I can see it on my laptop. Normally, all the cables are invisible and under the plastic.
  He s strange to say something on the subject but maybe a lid plastic isn't installed correctly or a screw is missing

  If you think that something isn't normal, you should contact your authorized service provider. They can check the laptop.

• Satellite Pro C660 graphic needs driver upgrade for Adobe Lightroom 6

  I tested 5 Lightroom on my Satellite Pro C660 and it worked fine.

  I decided to do it, and that week Lightroom 6 came out, so I bought Lightroom 6.

  LR6 gets to the start screen, then stops and closes the Windows7.
  I contacted Adobe and they went on my machine and identified the problem as being the graphics card and says I need an update of the driver.

  I've been on the Toshiba site and it says that the latest driver is 8.15.10.2189, which is the one I currently have (and was changed in 2012).

  I've been on the Intel site and their obtrusive says that the machine has a pilot custom then contact Toshiba.
  I looked around the Intel site and tried to install that seem to be plausible drivers, but have not found one that would install.

  My installation includes a monitor LG 22 "connected to the laptop with the spread of the desktop on both screens (laptop and monitor).

  No one knows what would be the upgrade of the driver I need or how can I know?

  James

  The page Intel graphics driver can be used, and you can also download the driver directly from the page.

  This CPU does support your laptop?
  What Intel GPU (Intel HD graphics chipset *) is the support of laptop?

  The Intel download page provides a driver Intel as an exe or zip package
  https://Downloadcenter.Intel.com/

  You need to download and unpack the zip package.
  You will then be able to update the driver in Device Manager, choose the Advanced installation update procedure.

• Keyboard stopped working on my Satellite Pro C660 2JD

  Hello world

  I have a Toshiba Satellite Pro C660-2JD.

  The keyboard has stopped working, it only works when the keyboard screen is selected as soon as I close the screen keyboard that it stops working. I plugged another keyboard that doesn't work or only works of the mouse and the keyboard on the laptop works ok. I used the Ubuntu live CD, and the keyboard works with it, but not in windows.

  I have restored the laptop to factory settings and also make a clean installation still does not work only when the screen on the keyboard keyboard works. Does anyone have any ideas of what is the problem? It seems that something prevents the loading keyboard driver.

  Krones

  Start your laptop and enter the BIOS settings. Keyboard works in BIOS mode?
  Have you tested using \Windows in "safe mode" (F8)?
  Please test and send feedback.

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Satellite Pro C660-171 - Double entry and/or loss of input key while typing

  Toshiba Satellite Pro C660

  As we bought this laptop in November 10, she has had intermittent problems with typing. Find the keyboard will miss the characters typed or type them twice. Fortunately, he can this all day and then stop and return to normal.
  We restored it back to factory settings and still does intermittently. Our man IT insists it is a software problem, but has been unable to find what it is.

  Bizaarly, we bought two of these laptops at the same time and they both have the same defect.

  Any help?

  This should help you:
  + Questions with the Satellite and Satellite Pro L670 & C660 series laptop keyboard +.
  http://APS2.toshiba-tro.de/KB0/TSB1103370000R02.htm

  PS: This has been discussed here in the forum. Search function to find similar themes.

• Satellite Pro C660 - BSOD for WLANs by FN + F8

  Hello!

  (Sorry for my bad English, but this is not my first language)

  I have a problem with my (Windows 7-64 bit) Satellite pro c660.

  When I want to activate or DΘsactiver wifi (fn + F8).
  I see the wifi turns on, but after 2 seconds, I got a BSOD...

  So I'm looking for drivers for my card (Realtek RTL8188CE) network and it does not work...
  I search a lot and I found this forum. I find a lot of problem of "my fn +; '. does not work"and respond you"try to install VAP. I have download this PPV to my computer and right after having extracted the files, I have this message: "Please restart your computer."
  I reboot and it still does not work... So I try to uninstall PPVS but I can't found on the Panel.

  (I now see the fn + F9 (of / activate the touchpad) does not work.)

  I have TOSHIBA Hotkey Utility version 1.62.0.28C.

  Hello

  Your message is very confusing
  First of all, I don t think that missing WLan driver would cause a BSOD.

  From my point of view you have a lot of problems with the system I m not quite sure if the resettlement of VAP would solve all your problems and I doubt that this would be solce your BSOD problem.

  So I advise to use the recovery disk to put the laptop back to factory settings. If the BSOD would still appear after that the laptop was recovered, then I guess as a hardware problem (probably faulty module WLan) causing this BSOD

• Re: Magenta/Purple mount screen Satellite Pro C660-2JR

  Hello

  I just brought a new laptop Satellite Pro C660-2JR and a few hours after getting it I noticed he has a purple cast/tint on any gray tones and is especially noticeable if a B & W image is seen because it has tones of purple, white and black with grey wire no real!

  Its very visible on the default settings (which are mostly dressed and contrasting even after I turned the backlight down) and I adjusted the brightness, contrast and gamma via graphics driver as by test cards, but despite that I get this darn will not disappear.

  Is the only way to sort of get rid of him for the contrast of the Green layer but affecting the other colors as well so it's not really solve the problem and the cast usually ends either be clear or green purple with no real neutral gray.

  This distribution is visible in all lighting and all the corners of the screen.

  I send it back for a replacement or open a repair warranty on the laptop, is there anything anyone can suggest I do?

  It is not easy to discuss this issue. We will see what it looks like.

  In my opinion, you should contact your local dealer, compare it with other laptops of the same series and ask for replacement.

• Satellite Pro C660 - 21(d): question about the partitions on the HARD disk

  Hello

  I just started using my new satellite pro c660 - 21 d

  My office has drive c, d, u, s
  C either windows 7, Vista D
  The drive U is 342 meg in size

  I didn't have the disk in two 230 gig drive so thoughtless narrowed C drive of 70 GB and D drive with 10 gig (it's the primary recovery partition

  I have now two empty partitions of 170 Gig (from c drive)
  and 214 Gig (from d drive)
  But windows will only allow me to add one as a disc of the user
  He says may not have more than 4

  The reason for being there is a partition of Active recovery without letter.

  I can't unshrink drive C or drive D then I went with 170 GB of unused space.

  I guess that a solution would be to lose the data disk 10 gig that contains the recovery software but then I don't have a backup.

  Suggestions as to what I could do to work around this problem.

  I am now under the Create recovery disks (2 of them) so maybe I could remove one of the partitions after.

  I don't know why he answered instead of edition, but if the recovery disc creation complete with no errors, I can remove the hard drive?

• Satellite Pro C660-239 - restore from recovery media error

  Hello!

  I have a laptop from a client, it is a Toshiba Satellite Pro C660-239, and I'm having a strange problem.

  The original hard drive failed, and as the laptop is out of warranty, we bought a new hard drive and ordered the recovery media to this model, our assistance to repair local toshiba.

  After the installation copied the files on the disk, the imageX command fails when you restore the image with error files:

  "the file or directory is corrupted and unreadable."

  The hard drive is new, and I also tried with more than 2 hard drives, as well as with an external cd-rom drive.

  I spoke with the support of assistance local repair, and told me that this happens because the ins new ' t compatible with the recovery media hard drive?

  One of the new disks hard I tried, was the exact same model as the original hard disk, and the error persists, so the hard drive may not be the problem.

  Y does it have that no change in the recovery media is corrupt?

  Could also be a motherboard problem?

  Thank you

  > Is there any change in the recovery media is corrupt?
  Of course, this is possible.
  In case the HARD disk is OK, the recovery media may be damaged.

  > Could also be a motherboard problem?
  I don t think so. I imagine that the HARD drive is recognized correctly in the BIOS and the error message says something about corrupt directory. I guess the disk directory that is the meaning and I think that the media should be replaced.