Satellite Pro C660-2JR - wifi is not connecting
Hello
I just bought a laptop Satellite Pro C660-2JR for my daughter, the unit works fine on lan cable, but not connecting not wireless.
Wireless indicator shows an intense tone, but when I click on connect after that 10 seconds, it says connected failed.
The network settings are correct (I checked with two other computers that connect without problem), the pc is running x 64 win7. on the toshiba site there is no drivers listed for the local network, I downloaded and installed the drivers from realtek realtek Web site, but no difference.
Is this a problem with x 64?
I've tried the recovery disks
Can anyone help?
Thank you
Rob
On this virtual path, it is not easy to say what the problem is, but there must be a problem with the WLAN settings I guess. What else? Your laptop can detect your router. Question is: what router do you have, what WLAN standard do you use, and you have WIFI password or not.
Have you tried to reboot your router and check again?
When you unlock your router you have the same problem?
Tags: Toshiba
Similar Questions
-
Re: Magenta/Purple mount screen Satellite Pro C660-2JR
Hello
I just brought a new laptop Satellite Pro C660-2JR and a few hours after getting it I noticed he has a purple cast/tint on any gray tones and is especially noticeable if a B & W image is seen because it has tones of purple, white and black with grey wire no real!
Its very visible on the default settings (which are mostly dressed and contrasting even after I turned the backlight down) and I adjusted the brightness, contrast and gamma via graphics driver as by test cards, but despite that I get this darn will not disappear.
Is the only way to sort of get rid of him for the contrast of the Green layer but affecting the other colors as well so it's not really solve the problem and the cast usually ends either be clear or green purple with no real neutral gray.
This distribution is visible in all lighting and all the corners of the screen.
I send it back for a replacement or open a repair warranty on the laptop, is there anything anyone can suggest I do?
It is not easy to discuss this issue. We will see what it looks like.
In my opinion, you should contact your local dealer, compare it with other laptops of the same series and ask for replacement.
-
Creating discs of recovery for Satellite Pro C660-2JR
Hello
is there a way to have the recovery disks installed win7 x 32 instead of x 64 (Satellite Pro C660-2JR)
If your laptop has been delivered with the 64-bit version, you can create the recovery for this preinstalled only version disk. With other words, saved on the recovery partition recovery image is recorded on DVD disc. It's nothing more than that.
If you want to use the 32 bit OS, you must check if your phone model is supported for him and install the clean version.
-
Satellite Pro C660-1 t 1: not able to play 3D games
Had a few Steam games and whenever I try to play them they do any thing initialization and then the process just stop.
From the journal of event viewer and there is an error message:
The failing application name: CriticalMass.exe, version: 1.0.858.0, time stamp: 0x4e5f7202
The failed module name: aticfx32.dll, version: 8.17.10.1047, time stamp: 0x4cabd6fc
Exception code: 0xc0000005
Offset: 0 x 00025861
ID of the process failed: 0x17ec
Start time of application vulnerabilities: 0x01cc85992f0a116d
The failing application path: c:\program files (x 86) \steam\steamapps\common\critical mass\CriticalMass.exe
Path of the failing module: C:\Windows\system32\aticfx32.dll
Report ID: 6f0167dd-f18c-11e0-bcb9-b870f45811e2I don't think it's a problem with the games I reinstalled them and the same thing happens.
All the drivers are the latest available.
The system is a satellite Pro C660 1 t 1, running Win 7 Home (64).Any help muchly appreciated.
Hi mate
> The failing module name: aticfx32.dll, version: 8.17.10.1047, time stamp: 0x4cabd6fc
There is advice on aticfx32.dll.
The file belongs to the driver ATI Technologies Inc. Radeon DirectX 11.
He pilot s graphics cardThe games are not known to me, but regarding the error message, it seems that there is a problem of compatibility between game and driver GPU
Therefore, I recommend an update the display driver -
Satellite Pro A200-1OM - Wifi does not work in Windows 7
Hello
I installed Windows 7 on my Satellite Pro A200-1OM.
I have updated all the drivers to the latest version.But I can't use my WLAN adapter more.
He always says that there are no networks available, but my access point is standing next to my laptop and on my other laptop, I can see it.My wifi adapter is turned on.
Miet
Hello
You don't see any or another WLan in your environment?
Are you sure that the WiFi is enabled on your laptop computer at 100%?
Please note that you need to move the material WLan switch and the LED should be on. In addition, you will need to activate the WLan using FN key combination + F8 performs this work! -
Satellite Pro U400 - 13 k - can not connect on Vista - SOLUTION
Setting of the Romanian regional components at installation time makes you unable to log into vista: Runtime LogonUI.exe error
Model: Satellite Pro u400 - 13 k.
No problem:
Installation of vista start preinstalled, idir a u400 - 13 k,.
When prompt change to Romanian localeResult: after completing the installation of vista program, LogonUI.exe crashes with Microsoft C++ Runtime exception dialog box.
_Solution: _
* Restart in mode safe then burn collection amovible.*
* Restrat configuration then do not change the regional settings *.Hope this helps other customers until it is resolved.
* For Toshiba QA Team *: I spent almost 4 hours to work around your untested product. Please at least fix this bug for other clients, as the time is important to everyone. I guess this can be linked to the logon request is not properly located or crush fingerprints.
Kind regards.
sandi_ro.US Forum: http://laptopforums.toshiba.com/tshb/board/message?board.id=brd_SatPro&message.id=180
Hi Sandi
Thanks for this solution.
This could be useful for all users who are looking for such a solution here in the forum.Greetings
-
Satellite Pro L100 (PSL15E) - WIFI does not work
I have just reformatted my laptop, reinsalled all good original disk drivers, wireless LAN worked until I upgraded to SP3 and now it does not connect.
It will only connect if I plug the cable, RG45Any ideas?
Hello!
After the SP3 update, have you checked the Device Manager If WLAN card is recognized correctly? If this is not the case, this!
In addition, I would recommend updating the driver WLAN. Maybe you have an older version of the driver that isn t working properly with SP3.
Here you can download new WLAN drivers: http://aps2.toshiba-tro.de/wlan/In the worst cases you must downgrade to SP2. A friend had me also some problems with SP3 and after downgrade to SP2 it worked well again.
Good bye
-
Problem WiFi on Satellite Pro C660-2TQ - lose the internet connection
Hey people,
hope you could help me. I did a new clean install of Win7 (32 bit) on my Toshiba Sat, C660-2TQ.
His job very well, except one thing:
the adapter Realtek RTL8188CE-in my laptop is just terrible...I installed the latest driver for this Home Premium wifi, but I lose the conn. to the internet all the time.
While I have to disconnect in the bottom right corner my laptop and connect again manually.
I have to do this every minute or so and its very annoying.I saw read several discussions about the problems with this specific wifi adapter, but no solution has helped me...
I didn't install all the listed drivers (34 available for me) but then what I Normand to update my BIOS or would it be a driver as the driver for the touchpad is necessary to get my wifi working properly?
Hope you guys could help me...
honestly desperate
cordially :)
Hello
WiFi disconnection problems have different causes and its not easy to say why it happens.
So, you will need to check each step and each option.First of all, you will get the latest version of the driver for this adapter WLan on the Realtek driver page:
[Download driver Realtek RTL8188CE | http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]Would recommend that you do not install this driver.
Before you begin with the installation, uninstall the previous driver.Secondly: it would be possible that this issue isn't related WLan driver and update the driver wouldn't help you much. In this case you should check the other parameters.
I recommend you to check the router settings and test different standards WLan (802.11 B / G or N).In many cases, the problems of compatibility between the router and wireless network card could lead to similar to your question.
Of course, you should also go to Device Manager-> card WLan-> properties-> Advanced tab
and must check if you can switch between the WLan standards singles (802.11 B / G or N)
Power management also in tab (last tab) you must unselect the option to turn off the device to save power. -
Satellite Pro P300-1FQ - wifi does not work properly
Win Xp installed, the wireless guard stop and start.
I've read the threads and I need to make a Bios Update.
Click on the link to download it, but get a blank page.Is there another place I can get it?
First of all, I would like to try other workarounds first before trying to update the BIOS.
I recommend updating the driver WLan first!
The laptop seems to be to use the Atheros WLan card.
You can download the driver Atheros here:
http://APS2.toshiba-tro.de/WLAN/?page=downloadsIn addition, you must turn off the WLan to save energy.
This can be done in power management Win 7!Then go to Device Manager-> card WLan-> properties-> Advanced tab
Here, you can check the different settings and change is necessary.Last but not least the BIOS can be downloaded from page European driver Toshiba and download functions because I could download the latest version of the BIOS
-
Satellite Pro c660 does not connect to another wireless after format
Hey all,.
I have a Satellite Pro c660 and bought a copy of windows 64 bit with him - the laptop come with many software from toshiba on what I wanted really, I therefore installed windows 64 bit (fitness in the process).
After the Installation I had some problems connecting to my wireless home (he was missing drivers, but have now install) but finally got it works.
After having taken it round my friends last night, I could not connect to its wireless - the password has been good and I could see the network, but he just kept constantly defect - its network was on it, because his cell phone he was performing. -The only difference between its network and the spirit (that I can see), it's that she was using the TKIP encryption to connect, while I was using AES (my network card is Atheros). -Even when I tried to configure a network profile and have it automatically connect (using the same information she used, including the TKIP encryption) - it was always not.
The ideas people? More missing drivers?
PS - I really don't want all that toshiba nanny software on the laptop.
Thanks in advance!
> Any ideas people? More missing drivers?
If you can see the Wlan network then it means that the WiFi adapter driver is correctly installed and the problem is between the router configuration problems WiFi and wireless network card.
Are you abele to connect to other networks wireless at home?
Please disable encryption settings in the Wlan router and try to connect to the Wlan that is unprotected.
But note; This must be done only for testing purposes!You should also check if the MAC address filtering is disabled in the settings of the router.
-
Satellite Pro C660 does not illuminate
Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.
any suggestions?
Hello
On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
After doing this connect the power running and try to start again.What happens when you do this?
-
Satellite Pro C660 - how to connect the Modem
I had a Satellite Pro C660.
I would like to know where the plug for connecting the internal modem to send a FAXThank you
> I would like to know where the plug for connecting the internal modem to send a FAX
As much as I know the C660 does not support an internal modem
-
"SHIFT" on the Satellite Pro C660 key does not work
G ' Day,.
I have a little problem with my laptop Toshiba Satellite Pro C660.
Unfortunately I had to remove the keyboard and thus dislodged the
fragile plug to connect to the computer.The 'Shift' key refused to work since. All other keys work as usual.
The only problem is the 'Shift' button does not.
I tried to gently move the plug but made no difference so now have to
Use a USB keyboard.Can you please help with suggestions for this problem?
Thank you for your time.See you soon,.
Sunrap.I really put t know what you think when you know that there is no connection for each unique key, but for the entire keyboard.
To be honest I ve changed keyboard several times but never noticed this problem.
Are the two SHIFT keys off function? -
Re: Fn key does not work on the Satellite Pro C660 2TQ
Hello
I bought laptop Satellite Pro C660 - 2TQ PSC0RE - 01801QGR 2 days ago and found the Fn key does not.
Someone help me to activate it?Hello
Select all programs-> Toshiba-> Flash cards, and then restart this utility.
Now if you press Fn + F8, you should be able to turn on or turn off the WiFi.
The FN + F9 active needs or disable the touchpad. -
Satellite Pro C660-1NQ does not detect the WLan network
Hi guys,.
We have a Toshiba Satellite Pro C660-1NQ here that does not at all, detect the wireless network
I checked the Device Manager and the wireless card does not show here.I tried scanning for new hardware, but nothing was found. I tried to turn the wireless off tension with the function and the keys F8 but not yet showing in Manager devices or any new hardware...
Any ideas as to what I can try next?
See you soon,.
AshHello
It seems that the laptop would support the Wlan Atheros 802.11agn card.
Usually the Atheros Wlan card must appear in Device Manager as on the menu network cards.
If it s not appear do not then I recommend that you install the WLAN driver which can be downloaded here:
http://APS2.toshiba-tro.de/WLAN/?page=downloadsChoose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
I hope this helps to detect the WiFi chip!
Maybe you are looking for
-
Hello I recently updated my OS (device: MacBook Pro retina 2015) to macOS Sierra. Everything is good, but my finder crashes whenever I have add tags. Any solution to this problem? Thank you very much
-
I should get my old Mac Book Pro refurbished
I'm getting a new Mac Book Pro, no question there. What should I do with my old Mac Book? It is OS x 10.6.8 processor 2.4 Intel Dual Core 2, with 4 GB of memory. I know he needs a serious upgrade OS and memory. Everything else seems to work very wel
-
Kan netwerkpad niet vinden. Geen netwerktoegang, IPv6 staat aan maar toch clean het geeft wel is een foutcode: 0 x 80070035. Wat kan ik toch mijn NAS installatie om hiermeedoen you good instaleren?
-
Have an old Dell computer and can't get the documents to print on my HP Officejet 5610v all-in-One printer because it is suspended in some way - need help - it is used to print, but now just documents get hung up. 3 documents in the queue can remove
-
Required for Penning frequent screen protector?
Recently, I put a screen protector, who came well recommended on my X220T. Installation was easy, and there is not a single question of bubbles or alignment. People have said there will be a decrease in the sensitivity to the touch and there isn't, b