Satellite Pro C660 is not commissioning
Hello
Deploy a satellite Pro C660, who decided that he no longer wants to start.
When you press the power button, the green light turns on and the fan begins to hum, however, the laptop does not have to go through the routine of the POST and everything turns off.
I checked the RAM Modules and the HARD disk automatically to the poor in the hope that the problem is simple, but nothing helped.
I managed to start the laptop previously now CTRL + ALT + DELETE, when it has sprung into life. But this trick works now is no more. I also tried waving the F12 or F2 key at startup, but the laptop won't always start.
I should mention that this laptop is not very old, less than six months, but if there is a simple solution as an alternative to return, I would like to try rather than the first!
Hope someone has a solution?
To these questions there is not some sort of magic bullet.
The description of your problem is OK, but we don t know what you don t in the past.
This problem doesn't happen for no reason and maybe something you did can be responsible for this.
Looks defective BIOS so can you please tell us since when you have this problem, and maybe you tried to update the BIOS in the past?
Tags: Toshiba
Similar Questions
-
Satellite Pro C660 does not illuminate
Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.
any suggestions?
Hello
On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
After doing this connect the power running and try to start again.What happens when you do this?
-
Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive
Hello
My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
I made a USB bootable with Win8 and starts very well.The problem is that it does not detect my SSD, so I can proceed with the installation.
SSD appears in BIOS but not in Windows Installer.
He said that there is a missing driver.I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.
I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...
What can I do?
Thanks for the help.
Best regards
Bruno MoreiraMore old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
As you say, the compatibility mode is not working too, so I think there is another problem.However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.
But I m wondering if you would be able to install this Win 8 on common SATA HDD.
Have you tried to format the SSD using a different computer, then install Win 8?
Give it a try. -
Satellite Pro c660 does not connect to another wireless after format
Hey all,.
I have a Satellite Pro c660 and bought a copy of windows 64 bit with him - the laptop come with many software from toshiba on what I wanted really, I therefore installed windows 64 bit (fitness in the process).
After the Installation I had some problems connecting to my wireless home (he was missing drivers, but have now install) but finally got it works.
After having taken it round my friends last night, I could not connect to its wireless - the password has been good and I could see the network, but he just kept constantly defect - its network was on it, because his cell phone he was performing. -The only difference between its network and the spirit (that I can see), it's that she was using the TKIP encryption to connect, while I was using AES (my network card is Atheros). -Even when I tried to configure a network profile and have it automatically connect (using the same information she used, including the TKIP encryption) - it was always not.
The ideas people? More missing drivers?
PS - I really don't want all that toshiba nanny software on the laptop.
Thanks in advance!
> Any ideas people? More missing drivers?
If you can see the Wlan network then it means that the WiFi adapter driver is correctly installed and the problem is between the router configuration problems WiFi and wireless network card.
Are you abele to connect to other networks wireless at home?
Please disable encryption settings in the Wlan router and try to connect to the Wlan that is unprotected.
But note; This must be done only for testing purposes!You should also check if the MAC address filtering is disabled in the settings of the router.
-
Satellite Pro C660 does not start, no screen
Hi guys I was wonder if anyone could help please.
I have a Toshiba laptop Satellite Pro C660 - 2 DR who seems to be defective (just out of warranty).
Everything worked fine until we came to a morning market and found that the screen remains off (black screen). There are no output through the VGA as I tested it on an external monitor.The CPU fan turns for a few seconds and then turns off.
There is no noise from the hard drive read/write either. The power light stays on. I removed the hard drive to access data on another system that worked Fortunately. I also removed the RAM, battery and optical drive, but there is still no output to the screen.
Is it sounds like a faulty motherboard?
The laptop seems to be in excellent condition.Is there something else I can try please? I would be very grateful for any advice.
Rich
Yes, it looks like the faulty motherboard or a part of the motherboard as RAM or CPU.
You said that you have already removed the RAM, but have you used a good RAM module tested?Theoretically, it could be just a problem of RAM but in the worst case, you will need to replace the motherboard and I think it would be really expensive repair.
-
Satellite Pro C660-1 t 1: not able to play 3D games
Had a few Steam games and whenever I try to play them they do any thing initialization and then the process just stop.
From the journal of event viewer and there is an error message:
The failing application name: CriticalMass.exe, version: 1.0.858.0, time stamp: 0x4e5f7202
The failed module name: aticfx32.dll, version: 8.17.10.1047, time stamp: 0x4cabd6fc
Exception code: 0xc0000005
Offset: 0 x 00025861
ID of the process failed: 0x17ec
Start time of application vulnerabilities: 0x01cc85992f0a116d
The failing application path: c:\program files (x 86) \steam\steamapps\common\critical mass\CriticalMass.exe
Path of the failing module: C:\Windows\system32\aticfx32.dll
Report ID: 6f0167dd-f18c-11e0-bcb9-b870f45811e2I don't think it's a problem with the games I reinstalled them and the same thing happens.
All the drivers are the latest available.
The system is a satellite Pro C660 1 t 1, running Win 7 Home (64).Any help muchly appreciated.
Hi mate
> The failing module name: aticfx32.dll, version: 8.17.10.1047, time stamp: 0x4cabd6fc
There is advice on aticfx32.dll.
The file belongs to the driver ATI Technologies Inc. Radeon DirectX 11.
He pilot s graphics cardThe games are not known to me, but regarding the error message, it seems that there is a problem of compatibility between game and driver GPU
Therefore, I recommend an update the display driver -
"SHIFT" on the Satellite Pro C660 key does not work
G ' Day,.
I have a little problem with my laptop Toshiba Satellite Pro C660.
Unfortunately I had to remove the keyboard and thus dislodged the
fragile plug to connect to the computer.The 'Shift' key refused to work since. All other keys work as usual.
The only problem is the 'Shift' button does not.
I tried to gently move the plug but made no difference so now have to
Use a USB keyboard.Can you please help with suggestions for this problem?
Thank you for your time.See you soon,.
Sunrap.I really put t know what you think when you know that there is no connection for each unique key, but for the entire keyboard.
To be honest I ve changed keyboard several times but never noticed this problem.
Are the two SHIFT keys off function? -
Satellite Pro C660 - Synaptic Touchpad pinch zoom partially does not work
Hey there,
The laptop I have is a satellite pro C660 2I. I've had my laptop for a year (ish) now, and he always had this 'problem '.
The touchpad has the ability to "pinch" which allows the user to zoom in or out using 2 digits on the touchpad (i.e. move the fingers together to zoom out).
Unfortunately, the touchpad recognises 2 figures as being present when I use only one finger, but only when I use the right side (or two-thirds of the pad from the right).
This made me think that maybe he was dirty, greasy etc so I cleaned and nothing has changed. I tried to uninstall the driver, reinstall / update... nothing. The strange thing is that it seems to work for approx. 1 second after I apply pressure to the left hand side in a movement of friction and then use the right side. This leads me to believe that the left side is * being constantly recognized as in use even when it is not *, but I don't know why.
I do that anyone can recommend?
Open the laptop and clean it?
A component failed to be replaced? A software update?I'm at my wits end with this laptop, and this is the only problem... is so constant now that the pad is almost unusable (deepened over time, but it wasn't a big deal at first).
Thanks in advance,
GriffNOTE: If there are all the technical information required, please treat me like a cave man / technological invalid. I am somewhat qualified but I would rather patronisingly simple instructions as sending unnecessary information to those who are trying to help me lose some time.
Perhaps your question describes isn't related to a dysfunction of the touchpad, but on the fact that the touchpad supports the dual mode functionality.
+ How do I enable or disable the Touchpad double mode +.
http://APS2.toshiba-tro.de/KB0/HTD9702NL0000R01.htmCheck if there is a difference with the touchpad on or off dual
-
Re: Fn key does not work on the Satellite Pro C660 2TQ
Hello
I bought laptop Satellite Pro C660 - 2TQ PSC0RE - 01801QGR 2 days ago and found the Fn key does not.
Someone help me to activate it?Hello
Select all programs-> Toshiba-> Flash cards, and then restart this utility.
Now if you press Fn + F8, you should be able to turn on or turn off the WiFi.
The FN + F9 active needs or disable the touchpad. -
Satellite Pro C660-2JR - wifi is not connecting
Hello
I just bought a laptop Satellite Pro C660-2JR for my daughter, the unit works fine on lan cable, but not connecting not wireless.
Wireless indicator shows an intense tone, but when I click on connect after that 10 seconds, it says connected failed.The network settings are correct (I checked with two other computers that connect without problem), the pc is running x 64 win7. on the toshiba site there is no drivers listed for the local network, I downloaded and installed the drivers from realtek realtek Web site, but no difference.
Is this a problem with x 64?
I've tried the recovery disksCan anyone help?
Thank youRob
On this virtual path, it is not easy to say what the problem is, but there must be a problem with the WLAN settings I guess. What else? Your laptop can detect your router. Question is: what router do you have, what WLAN standard do you use, and you have WIFI password or not.
Have you tried to reboot your router and check again?
When you unlock your router you have the same problem? -
Satellite Pro C660-1NQ does not detect the WLan network
Hi guys,.
We have a Toshiba Satellite Pro C660-1NQ here that does not at all, detect the wireless network
I checked the Device Manager and the wireless card does not show here.I tried scanning for new hardware, but nothing was found. I tried to turn the wireless off tension with the function and the keys F8 but not yet showing in Manager devices or any new hardware...
Any ideas as to what I can try next?
See you soon,.
AshHello
It seems that the laptop would support the Wlan Atheros 802.11agn card.
Usually the Atheros Wlan card must appear in Device Manager as on the menu network cards.
If it s not appear do not then I recommend that you install the WLAN driver which can be downloaded here:
http://APS2.toshiba-tro.de/WLAN/?page=downloadsChoose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
I hope this helps to detect the WiFi chip! -
Satellite Pro C660 graphic needs driver upgrade for Adobe Lightroom 6
I tested 5 Lightroom on my Satellite Pro C660 and it worked fine.
I decided to do it, and that week Lightroom 6 came out, so I bought Lightroom 6.
LR6 gets to the start screen, then stops and closes the Windows7.
I contacted Adobe and they went on my machine and identified the problem as being the graphics card and says I need an update of the driver.I've been on the Toshiba site and it says that the latest driver is 8.15.10.2189, which is the one I currently have (and was changed in 2012).
I've been on the Intel site and their obtrusive says that the machine has a pilot custom then contact Toshiba.
I looked around the Intel site and tried to install that seem to be plausible drivers, but have not found one that would install.My installation includes a monitor LG 22 "connected to the laptop with the spread of the desktop on both screens (laptop and monitor).
No one knows what would be the upgrade of the driver I need or how can I know?
James
The page Intel graphics driver can be used, and you can also download the driver directly from the page.
This CPU does support your laptop?
What Intel GPU (Intel HD graphics chipset *) is the support of laptop?The Intel download page provides a driver Intel as an exe or zip package
https://Downloadcenter.Intel.com/You need to download and unpack the zip package.
You will then be able to update the driver in Device Manager, choose the Advanced installation update procedure. -
Keyboard stopped working on my Satellite Pro C660 2JD
Hello world
I have a Toshiba Satellite Pro C660-2JD.
The keyboard has stopped working, it only works when the keyboard screen is selected as soon as I close the screen keyboard that it stops working. I plugged another keyboard that doesn't work or only works of the mouse and the keyboard on the laptop works ok. I used the Ubuntu live CD, and the keyboard works with it, but not in windows.
I have restored the laptop to factory settings and also make a clean installation still does not work only when the screen on the keyboard keyboard works. Does anyone have any ideas of what is the problem? It seems that something prevents the loading keyboard driver.
Krones
Start your laptop and enter the BIOS settings. Keyboard works in BIOS mode?
Have you tested using \Windows in "safe mode" (F8)?
Please test and send feedback. -
Satellite Pro C660-29W. How to remove the supervisor password
Hi all
I've been locked out of my bios and I don't know the password. My little brother was playing with my laptop computer and accidentally set the supervisor password. Is it possible that I can recover the password or reset it? I really need to change my boot sequence as I just bought a new SSD and need to format my laptop. Suggestions will be highly appreciated.Here's my version of bios and details of laptop
Toshiba satellite Pro C660-29W
CPU Intel Core i5 2410 M
8 GB Ram DDR3
BIOS: BIOS FRIEND - installation utility Aptio
BIOS system ver: 1.50
THIS Version: 1.50Thank you
Supervisor password is very important safety device and a kind of reset of the user is not possible. You can cancel it, but you must know the correct password to confirm that you are the real owner computer laptop.
Toshiba provider in your country can help you with this. You just approve that you are owner of the laptop, and they can cancel it for you. Of course, you must pay for it.
As far as I know, there are several techniques for the removal of password and it depends on phone model.
Contact the closest Toshiba ASP and ask for help.
-
Satellite Pro C660-1LR - new HARD drive but no recovery disk
I need help for my son who is the Satellite Pro C660 1LR laptop.
In this portable hard drive is completely dead, I have not created a disk of recovery for this system of portable computers.
I bought a new hard drive that is installed... However, as you guessed it I have no access to reinstall an OS, this laptop works on windows 7.I'm not really tech savvy so if someone can advise me please do explain to the fool proof format! I try to avoid having to buy something expensive.
> I'm trying to avoid having to buy something expensive.
Problem is that you don't have many options in this regard.
If you want to have the factory again settings you must install recovery disc. You can order on https://backupmedia.toshiba.eu/landing.aspx of course is not free, but, in my opinion, without a doubt the best solution.You can buy the Microsoft installation disc and install the clean version. You must purchase a valid license for it.
In this case, you must install all the necessary drivers, tools and utilities for more than one by one.Just in case you can get this installation of Microsoft and the free license you can save money.
Believe me, the best solution is the original recovery disk command.
Maybe you are looking for
-
When I did research on the way and that this function would I found no data lost three of my most used APPS? When I did the reset I don't have access to a computer and there is no way to verify even how to recover them without internet capabilities!
-
Update iOS 9.3 installation problem
I try to install the update. System will not check, saying that I am not connected to the Internet. However, I am connected. What should I do?
-
Hello Software: PC laptop Toshiba RegsitrationLanguage: GermanProduct: S11 - 11H I can't save my laptop during, enter the date to purhase. Whenever sending fails in recognizing good trained date format.
-
Left speaker sounds hail and speaker right doesn't work at all on my MacBook Pro. Would I need to get her an apple store or can I fix it myself? If so, how? Thank you!
-
Get this error message on blue screen. Said minidump but cannot read