Satellite Pro C660 - what drivers should I download?

Similar Questions

• Satellite P875-10U - what drivers should I install

  Hello!

  A few days ago bought a new laptop.

  Today I did the format, and I wanted to ask you, what drivers should I install, because I think all the drivers are not necessary, but I want your opinion, I have already installed the Atheros Ethernet driver to get a connection to the internet, and I did the update of Windows.

  What should I do now?
  Please give me an advice

  Hello

  You should check in the Device Manager.
  I'm not quite sure what your laptop wireless network card is supported but here is a nice FAQ How to find drivers for unknown devices:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

  The necessary drivers can be found here:
  http://APS2.toshiba-tro.de/WLAN/

• Satellite P750-103 - what drivers should I install?

  I have the following problem: after you have reinstalled Windows 7 64 bit and the pilots, who have downloaded from the official website Toshiba.ru, licensed my laptop slowly began to run File Explorer, with indexing for 5-10 minutes the contents of the hard disk (sometimes - with no results).

  I think that probem associated the mechanizm of driver installation.
  East - the right conclusion?

  If YES, in this regard, I have the following questions:

  -Should what drivers I install?
  -What is the correct serialization of installing these drivers?

  Hello

  See the list of drivers and make sure that you have installed all of the drivers listed:

  Win7 64-bit SP1
  Sun Java2 Runtime Environment 1.6.0_20
  TOSHIBA Assist 4.02.02
  TOSHIBA Bulletin Board 2.1.10
  TOSHIBA ReelTime 1.7.17.0
  SW 9.2.0.1015 Chipset installation utility
  Intel Management Engine Interface V7.0.4.1197
  Driver Intel 8.15.10.2353
  267.44 NVIDIA display driver
  Driver Intel Rapid Storage Technology 10.1.2.1004
  Utility 1.63.51.2C TOSHIBA supervisor password
  TOSHIBA HW Setup Utility 1.63.1.34C
  1.63.0.12 TOSHIBA Flash Cards Support utility
  TOSHIBA value added package 1.5.4.64
  NVIDIA HD Audio Driver 1.1.13.1
  Audio Realtek Driver 6.0.1.6305
  TOSHIBA 1.0.3 Wireless LAN indicator
  Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
  Synaptics Touch Pad Driver 15.2.11.1
  TOSHIBA HDD Protection 2.2.1.13
  Atheros Bluetooth Driver Package v1.0.4 Filter
  Battery Bluetooth for Windows by Toshiba v8.00.06 (T)
  Realtek LAN Driver 7.038.0113.2011
  JMicron 1.00.57.02 card reader
  ENE CIR driver V3.2
  USB3.0 Driver 2.0.34.0
  TOSHIBA Sleep 1.4.2.7 utility
  3.1.9 TOSHIBA face recognition
  TOSHIBA eco Utility 1.2.24.64
  TOSHIBA HDD/SSD Alert 3.1.64.8
  TOSHIBA Service Station 2.1.52
  2.0.0.7.64 HDMI Control Manager
  TOSHIBA PC Health Monitor 1.7.5.64
  ConfigFree 8.0.37rev.2
  TOSHIBA Web Camera Application V2.0.0.19
  TOSHIBA V4.00.6.08 VCR - HAS
  TOSHIBA Media Controller 1.0.86.2
  TOSHIBA Media Controller plugin 1.0.6.1
  TOSHIBA resolution + plug-in for Windows Media Player 1.1.0
  PatchFiles PCIIDEREG - 1.2
  PatchFiles TosVolRegulator_x64_1.1

• Satellite Pro A60: what RAM should I take?

  Hello.
  I have a Satellite Pro A60 P4 532, with the following:
  3.06 GHz/XP Pro/256 MB/40 GB/15TFT/DVD-CDRW/LAN/WiFi

  I want to add memory (256 MB).
  On the web site of Toshiba, they lead me to the PA3127U - 1 M 25 (DDR PC2100), but I see that for almost similar laptops they offer the PA3311U - 1 M 25 (PC2700 DDR)

  * 256 MB DDR PC2100 (PA3127U - 1 M 25)
  -P4 532 (3.06 GHz) / XP Pro/256 MB/40 GB/15TFT/DVD-CDRW/LAN/WiFi
  -Celeron D335 (2.8 GHz) / XP Home/256 MB/40 GB/15TFT/CD-RW/DVD-LAN

  * 256 MB DDR PC2700 (PA3311U - 1 M 25)
  -P4 532 (3.06 GHz) / XP Pro/256 MB/40 GB/15TFT/DVD-CDRW/LAN
  -P4 532 (3.06 GHz) / XP Pro/512 MB/60 GB/15TFT/DVD-R/RW/LAN
  -Celeron D335 (2.8 GHz) / XP Pro/256 MB/40 GB/15TFT/CD-RW/DVD-LAN

  Can I take the PC2700?
  Not for the best performance, but it is cheaper!

  In addition, it is the same problem with 512 MB...

  Thank you

  Hello

  Yes, you can take PA3311U - 1 M 25 (PC2700 DDR).

• Satellite C660-1F1 - what drivers should I download?

  I'm going to replace the hard drive in a portable 3.5 years old.

  Model:
  Toshiba
  C series
  C660 1F1
  Windows 7 64 bit

  Can someone send me a list of links/to/from the pilot/s I need to download the new hard drive? I've got on this page (http://www.toshiba.co.uk/innovation/download_drivers_bios.jsp?service=UK), but there are 45 drivers available for this model. I guess that I do not have need of each of them, but none of them stand out as specific needs.

  Any help, greatly appreciated.

  Click on the red arrow in the Details column.
  You can find details about the unique software or driver.
  Then you can decide whether you need it or not.

  But as General, you have all the drivers and software to use all the features of the laptop

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Satellite Pro C660 bricked by update of the BIOS that failed

  My sister asked me to update his laptop (Toshiba Satellite Pro C660-16N; The part number PSC0ME-01S00SEN) of Windows 7 Home Premium (64 bit) of Windows 8 (64-bit).
  So I did.

  Then I went UK from Toshiba Web site to check if there are any drivers I had to install for Windows 8. The only one was an update of the BIOS (for BIOS v1.70). I don't know what was the previous BIOS version number.

  So I run the update application in Windows 8. Phoenix WinPhlash Technologies starts and then in the middle of the update, everything freezes.

  The trackpad would not move the cursor or anything like that. I had no choice but to disconnect the phone from the wall and remove the battery. The laptop is not under warranty.

  Of course, now it won't turn. It will beep once when I press the power button, but the system does not light. A few minutes later, it looks like one long beep and two short beeps. It then keeps repeating this sequence every two minutes "one long beep, 2 short beeps".

  I google and read the site after the blog after the post on the forum, but nothing works. Links to the software offered on these forums/blogs/Web sites in french are usually dead, so I can't try what they suggest.

  The most common solution is the Phoenix crisis recovery tool. I managed to download v1.0.0.4 which is supposed to allow me to make a bootable USB key. The version of this tool that I downloaded is supposed to be for a Lenovo ThinkPad X 200. I have the correct BIOS.rom to C660 Pro Satellite (I renamed BIOS.wph and copied to the appropriate folder).

  I followed all the instructions, but it doesn't seem to work. Some sites say if it happens, I have the wrong version of phlash16.exe. Some other sites say that HP Boot Disk USB Utility should be used, but I don't know how to use it.

  What I really need, is a definitive step by step foolproof guide to know what to do, with links to the files/tools to use for this model of laptop. I will follow this blindly (which I don't really understand what makes each step, I just do it with no understanding,) so if anyone can help me with this, please write a guide like an idiot!

  If anyone can help me with this, I appreciate it. I'm really in a difficult situation - I can't really afford to pay a Toshiba ASP to fix it, and I can't afford a new laptop certainly. But I also couldn't bring myself to tell my sister, ' it's broken, deal!

  Thanks in advance.

  Take a look at this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

  Perhaps the last comment by the user * gansell1980 * could help you.
  Otherwise, you need help from the Toshiba authorized service if you reflash the BIOS ROM module provider

• Satellite Pro C660 graphic needs driver upgrade for Adobe Lightroom 6

  I tested 5 Lightroom on my Satellite Pro C660 and it worked fine.

  I decided to do it, and that week Lightroom 6 came out, so I bought Lightroom 6.

  LR6 gets to the start screen, then stops and closes the Windows7.
  I contacted Adobe and they went on my machine and identified the problem as being the graphics card and says I need an update of the driver.

  I've been on the Toshiba site and it says that the latest driver is 8.15.10.2189, which is the one I currently have (and was changed in 2012).

  I've been on the Intel site and their obtrusive says that the machine has a pilot custom then contact Toshiba.
  I looked around the Intel site and tried to install that seem to be plausible drivers, but have not found one that would install.

  My installation includes a monitor LG 22 "connected to the laptop with the spread of the desktop on both screens (laptop and monitor).

  No one knows what would be the upgrade of the driver I need or how can I know?

  James

  The page Intel graphics driver can be used, and you can also download the driver directly from the page.

  This CPU does support your laptop?
  What Intel GPU (Intel HD graphics chipset *) is the support of laptop?

  The Intel download page provides a driver Intel as an exe or zip package
  https://Downloadcenter.Intel.com/

  You need to download and unpack the zip package.
  You will then be able to update the driver in Device Manager, choose the Advanced installation update procedure.

• Satellite Pro C660-1NR crashes intermittently, hard reset required

  Windows 7 64 bit Satellite Pro C660-portable 1NR

  Hello

  One of computer Laptop my users freezes at random times throughout the day. At first, I thought it was battery attached, as the first two occurrences that happened when using disconnected, but it has since then done when connected too. On average, it happens at least once a day.

  He will not resume later, the only way to get past that is holding down the power button then restarting.

  The problem started when downloading a number of updates from Windows about 6 weeks ago. Previously it has never frozen, not even once.

  I'll wait to die again (maybe today, maybe tomorrow!) and focus on the event log around the time he died.

  Don't you think that it is hardware or software related?

  I updated the drivers of the laptop, chipset etc, so everything is as up-to-date as I can get it.

  Nothing wrong with this laptop other than the gel, performs very well when it works.

  Your help is very appreciated.

  Kind regards
  Lee

  Post edited by: lhall6

  > The problem started when downloading a number of updates from Windows about 6 weeks ago. Previously it has never frozen, not even once.

  So why you n t try to fix the system to the point before the updates were installed? I think it would be the first step, try to solve this problem.

  > Do you think that it is hardware or software related?
  If the settings in the system at the point of early time would not help, I suppose that a recovery system would be the next step to find out the reason for this problem
  After the related question of the unit should work correctly if it could not well be material recovery

• Satellite Pro c660 does not connect to another wireless after format

  Hey all,.

  I have a Satellite Pro c660 and bought a copy of windows 64 bit with him - the laptop come with many software from toshiba on what I wanted really, I therefore installed windows 64 bit (fitness in the process).

  After the Installation I had some problems connecting to my wireless home (he was missing drivers, but have now install) but finally got it works.

  After having taken it round my friends last night, I could not connect to its wireless - the password has been good and I could see the network, but he just kept constantly defect - its network was on it, because his cell phone he was performing. -The only difference between its network and the spirit (that I can see), it's that she was using the TKIP encryption to connect, while I was using AES (my network card is Atheros). -Even when I tried to configure a network profile and have it automatically connect (using the same information she used, including the TKIP encryption) - it was always not.

  The ideas people? More missing drivers?

  PS - I really don't want all that toshiba nanny software on the laptop.

  Thanks in advance!

  > Any ideas people? More missing drivers?

  If you can see the Wlan network then it means that the WiFi adapter driver is correctly installed and the problem is between the router configuration problems WiFi and wireless network card.

  Are you abele to connect to other networks wireless at home?

  Please disable encryption settings in the Wlan router and try to connect to the Wlan that is unprotected.
  But note; This must be done only for testing purposes!

  You should also check if the MAC address filtering is disabled in the settings of the router.

• Satellite Pro C660-2JR - wifi is not connecting

  Hello

  I just bought a laptop Satellite Pro C660-2JR for my daughter, the unit works fine on lan cable, but not connecting not wireless.
  Wireless indicator shows an intense tone, but when I click on connect after that 10 seconds, it says connected failed.

  The network settings are correct (I checked with two other computers that connect without problem), the pc is running x 64 win7. on the toshiba site there is no drivers listed for the local network, I downloaded and installed the drivers from realtek realtek Web site, but no difference.
  Is this a problem with x 64?
  I've tried the recovery disks

  Can anyone help?
  Thank you

  Rob

  On this virtual path, it is not easy to say what the problem is, but there must be a problem with the WLAN settings I guess. What else? Your laptop can detect your router. Question is: what router do you have, what WLAN standard do you use, and you have WIFI password or not.

  Have you tried to reboot your router and check again?
  When you unlock your router you have the same problem?

• Satellite Pro C660 - 24 k: Webcam/Microphone and interface issues

  I went on Skype to talk and I found that it could not detect a webcam, and the other person couldn't hear my voice. I checked Device Manager and no imagery or recording device has been found.
  The camera and microphone are integrated. They have worked before.

  There is another problem that may be related. When I got the laptop, when I pressed the fn key, a bar at the top of the pop up screen would be who showed me what did all the various f keys. It no longer appears.

  Also, when I got the laptop, if I plug headphones or an external mic into the line out Sockets, a pop-up message would be. In this case no longer, and the laptop is not receiving any input headphones I plug into it.

  I tried to reinstall the drivers of webcam, but in vain. According to Device Manager there is no. If this were the only problem, so I can put down to damage, but other problems give me a feeling it has something to do with a kind of software can I have accidentally disabled or deleted, which exercises control over the webcam/mic and the line output, which also produces pieces of UI such as the fn key.

  I can't identify a moment when it stopped working I barely noticed the webcam and the microphone does not work as I them haven't used for a while. I noticed, however, how pressing the "fn" key is no longer shows the respective information on the screen.

  Model: Toshiba Satellite Pro C660 - 24 k
  OS: Windows 7 64-bit

  > There is another problem that may be related. When I got the laptop, when I pressed the fn key, a bar at the top of the pop up screen would be who showed me what did all the various f keys. It no longer appears.

  The menu of the FN button that appears just by pressing the FN key combination is controlled by the Support of Flash memory card utility.
  Try restarting this software located in all programs > Toshiba-> Flash Cards

  If this does not work, reinstall the Support of Flash memory card utility.

  > Also, when I got the laptop, if I plug headphones or an external mic into the line out Sockets, a pop-up message would be. In this case no longer, and the laptop is not receiving any input headphones I plug into it.

  It seems that the laptop supports the Realtek audio chip. That is why the Realtek HD audio Manager must be preinstalled and placed in the Panel.
  Go to the dashboard-> Realtek HD audio manager
  In the upper right corner, there is a small yellow folder called "Connector settings" in my version.
  There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged.

  I m not sure about the question of the webcam... perhaps that the system is confusing the Skype upwards and face recognition software uses the same cam then perhaps you should uninstall the software for the webcam, Skype and a face recognition software and must restart the laptop. After the software installation of webcam, facing new to Skype and recognition software.

• Satellite Pro C660-171 - Double entry and/or loss of input key while typing

  Toshiba Satellite Pro C660

  As we bought this laptop in November 10, she has had intermittent problems with typing. Find the keyboard will miss the characters typed or type them twice. Fortunately, he can this all day and then stop and return to normal.
  We restored it back to factory settings and still does intermittently. Our man IT insists it is a software problem, but has been unable to find what it is.

  Bizaarly, we bought two of these laptops at the same time and they both have the same defect.

  Any help?

  This should help you:
  + Questions with the Satellite and Satellite Pro L670 & C660 series laptop keyboard +.
  http://APS2.toshiba-tro.de/KB0/TSB1103370000R02.htm

  PS: This has been discussed here in the forum. Search function to find similar themes.

• Satellite Pro C660 - BSOD for WLANs by FN + F8

  Hello!

  (Sorry for my bad English, but this is not my first language)

  I have a problem with my (Windows 7-64 bit) Satellite pro c660.

  When I want to activate or DΘsactiver wifi (fn + F8).
  I see the wifi turns on, but after 2 seconds, I got a BSOD...

  So I'm looking for drivers for my card (Realtek RTL8188CE) network and it does not work...
  I search a lot and I found this forum. I find a lot of problem of "my fn +; '. does not work"and respond you"try to install VAP. I have download this PPV to my computer and right after having extracted the files, I have this message: "Please restart your computer."
  I reboot and it still does not work... So I try to uninstall PPVS but I can't found on the Panel.

  (I now see the fn + F9 (of / activate the touchpad) does not work.)

  I have TOSHIBA Hotkey Utility version 1.62.0.28C.

  Hello

  Your message is very confusing
  First of all, I don t think that missing WLan driver would cause a BSOD.

  From my point of view you have a lot of problems with the system I m not quite sure if the resettlement of VAP would solve all your problems and I doubt that this would be solce your BSOD problem.

  So I advise to use the recovery disk to put the laptop back to factory settings. If the BSOD would still appear after that the laptop was recovered, then I guess as a hardware problem (probably faulty module WLan) causing this BSOD

• Re: Magenta/Purple mount screen Satellite Pro C660-2JR

  Hello

  I just brought a new laptop Satellite Pro C660-2JR and a few hours after getting it I noticed he has a purple cast/tint on any gray tones and is especially noticeable if a B & W image is seen because it has tones of purple, white and black with grey wire no real!

  Its very visible on the default settings (which are mostly dressed and contrasting even after I turned the backlight down) and I adjusted the brightness, contrast and gamma via graphics driver as by test cards, but despite that I get this darn will not disappear.

  Is the only way to sort of get rid of him for the contrast of the Green layer but affecting the other colors as well so it's not really solve the problem and the cast usually ends either be clear or green purple with no real neutral gray.

  This distribution is visible in all lighting and all the corners of the screen.

  I send it back for a replacement or open a repair warranty on the laptop, is there anything anyone can suggest I do?

  It is not easy to discuss this issue. We will see what it looks like.

  In my opinion, you should contact your local dealer, compare it with other laptops of the same series and ask for replacement.