Satellite Pro C665 and internet connection problems

Similar Questions

• Satellite Pro C870-1E2 - internet connection problem Proxy Server not responding

  My old Toshiba computer connects to the internet via a numbered port,
  yet my new Toshiba Satellite Pro C870 1E2 connects to the internet through a proxy server.

  Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

  When I tried the old computer connected instantly he had to wait a long period of time before that the "proxy" got it's act together.

  Advice please?

  > Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

  And why you think you ve you have a problem with the Satellite laptop? I understand the original message: the Satellite acts as client.
  In my eyes there is a problem with the proxy server, and this should be checked first.
  Its almost impossible to tell which could affect the proxy, but as a first step, a reboot would be desirable.

• 6525 - resettlement and internet connection problems Deskjet

  Hello

  yesterday I managed to install my new printer hp deskjet 6520 (5) on my HP Pro 3520 (AiO) with win 7 - using a wi - fi connection. Then, I also installed the printer on my laptop (sony vaio) - also use wifi. The two communicated yesterday with printer. But I have not tried to use brought down PC after install portable printer

  Nevertheless, today HP 3520 Pro could not have communicated with printer. Software repeatedly said the printer cannot be connected to the PC (while printing through the laptop was ok...). No miracle has helped so I decided to uninstall and reinstall the printer.

  I've uninstalled it successfully but when I try to use the hp guide software installation (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-122330-1&cc=cz&dlc=cs&lc=cs... he just said initially that I am not connected to the internet... Although I have no problem with the internet connection (I even tried connecting cable...).

  Help, please... I do not know how to do this

  Thanks in advance

  It is now resolved... I do not understand this, but when I turned off my laptop, the printer begins to communicate with PC...

  If HP - is there a reason why cell phone (with the installed printer) refuse the communication between the PC (HP Pro 3520) and hp printer deskjet 6525?

• Satellite Pro 4600 and WiFi configuration problem

  Got a Toshiba Satellite Pro 4600, under WXP SP3. It s a P3 900 mhz with 256 RAM and it s a great laptop, but peut t seem to understand the Wi - Fi.
  It captures my router ok sky open a Wi - Fi connection, but it s the config, when I put the WEP key it says it is not compatible with WEP, WPA only s.

  I put the ssid for the router ok but it won t accept the key/passphrase in there it says s not long enough.
  Could someone point me in the direction of a guide of idiots for this configuration?
  Wi - Fi is built-in and it s a Toshiba mini PCI
  Thank you

  Hello

  For me the case sounds very clear;
  You can't put the encryption key just because the WEP key is not compatible / supported.

  I think you should use encryption that is supported by both parties; router and wireless network card

  Good bye

• Satellite Pro L10 and WLAN connection

  One of my clients claims that the wireless connection is not displayed in fact at all and he now believes that there is no wireless connection.

  The L10 was problems with does not appear before wireless connection?

  And if so is it possible to fix it.

  Hi Graham

  It will be interesting to know what model of Satellite has your customer (L10 - xxx). It is possible that the device has no wireless network card onboard. Please check the underside of the laptop. Usually, there must be a small label WLAN.

  If the device has a wireless network card which should also be listed in the device under network adapters Manager.

  Good bye

• Satellite Pro m USB devices connection problems

  Hello visitors and insiders.

  can someone help me, please? - or are the causes of the problems of programmed BIOS is not perfect?

  I put on the USB Ports (I tried all 3 Ports) after correct installation of the most recent drivers for devices and the BIOS and chipset.
  I tried MAGIX encoder by USB and PINNACLE for USB encoder - both signal-request-problems and the two could not shut down the system after connecting with USB and close with her current for USB device.

  I tried this on different WinXP installiations (multiboot) - but on all systems even.

  The same reaction has been, as I have connected a special CUSHION cooler for laptop with additional USB Ports.
  The CUSHION cooled - but the USB Ports do not work for all devices (devices I am familiar with the)
  Ports of origin of the laptop, has failed to TRIM, too). (worked directly devices: mouse, webcam, keyboard, drive hard usb)

  What should do? .. If anyone know Somethin ' help... I will be very happy.

  Thank you very much!!! (Sorry for my English is not perfect)

  Ben

  Is what model of laptop exactly?

  Have you installed Windows yourself? Or it was preinstalled?

  Looks like it's a software problem, bad drivers USB can at fault.

  You are able to back up your data and run recovery?

• Satellite A100-350 and internet connection running slowly

  The internet is very slow and run some applications run very slowly and do not work well. Access Mozilla Firefox is slow. The application 360 off mininova.com sharepro responds No and jams. I never get anywhere with this program.

  This computer behaves like a broken record.
  Anyone have any ideas?

  Download yourself a spyware detect software like "Adaware" and clean your laptop with it.
  I think that it is somehow filled with useless software that runs in the background. You can
  even try to disable some temporary applications such as antivirus and see if you have any improvement.

  Concerning

  chain

• Satellite Pro U400 and fingerprint software problem

  Hello!
  Since a long time, my Fingerprint Software gave problems.
  About 2 days after receipt of the computer, I started to get an error message saying "Specified Database not found" or "Hardware not found footprints" (something similar to messages!)

  Because then I never really used it, but now, since the last update "Authentec", I thought that it can start working.
  The problem is, once I installed the update, I get an error saying "Remove old version, given to zero computer.
  So I did it, I removed the old TrueSuite Access Manager and restarted the computer.

  Once restarted, the Autentec Installer (new updated) started to install, but give me again the same error message 'remove old version, given to zero computer.

  I checked for the remains of the old software, but he found nothing.

  I won't be formatting my computer to do this, is there another way I can fix this?
  Thank you

  Hello

  I think the update found garbage in the registry and I think that after the Truesuite software has been removed, you must clean the operating system using the CCLeaner.
  After cleaning the operating system and the registry, you must restart the laptop before you repeat the update procedure.

  Maybe you should also install a newer version of Toshiba page before starting the update.

• OfficeJet Pro 8610: ePrint Internet connection problem on Officejet Pro 8610

  I work in a shared office.  I just got my printer & want to set up ePrint.  I got an error message saying that both the computer and the printer must use the same internet network.  But my computer is using my personal Internet & I put the printer to use the network wifi internet.

  I would like to take advantage of the options, which allows, ePrint offer?  Both the printer & computer do I have to use the same internet network or can be on different?

  Allowing ePrint can be performed on the print directly. To change the settings on ePrint (access authorization, custom, etc. e-mail addresses), you can use any computer with web access, on hpconnected.com. ePrint works exactly like mail, then the computer can be on any network.

  The computer needs to be on the same network only when you want to print to it as a network printer.

• wireless network and Internet connection problem

  I had a yellow triangle on the network icon, but I fixed,

  now no icons on the network icon

  

  ____________________________

  

  __________________________________

  

  ___________________________________

  

  but same problem

  I re - install the adapter wireless but same problem, I can not open any site!

  Same problem,

  Thank you

  Please restart your computer, wait 30 minutes for the system to operate before downloading more information so that the impact of the changes can become apparent.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Satellite Pro A100 with Modem USB internet connection problems

  Hi all

  I'm looking for some help with a problem. I am struggling to solve. I have a Satellite Pro A100 and sometimes use it with a speedtouch 330 what ASDL USB connected modem, but whenever I use this at some point that I seem to lose connectivity, the Explorer does not display the pages and other applications stop working, even if I do not seem physically the connection loose. It is often the only to get back on the net to restart and start over.

  The modem doesn't seem to be the problem as it works very well with my desktop and the laptop works very well when it is connected through wireless and idea and solution would be greatly appreciated.

  Sean the Bear

  Maybe you should take a look here in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31982&TSTART=0

  There is a user who uses the same modem SpeedTouch 330 USB on laptop with Vista OS.

  You will need to install compatible drivers on the site of modem manufacturer.

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• Satellite Pro A200 failing to connect with iphone via wifi hotspot

  My apologies if I get some of the jargon wrong, but I'm pretty useless when you want IT emits.

  I have a Satellite Pro A200 and had problems connecting to various wifi connections.
  The computer could see the wifi connection and connect to it, but I wasn't able to connect to the internet.

  The question of the Office was arranged by our IT support guy (security settings on the new router we too complex for my PC or something like that), but he has not been able to solve the problem of not being able to connect to my iphone to use the 'hotspot' via the wifi function.

  Someone there knows a way to solve this, or is it a simple fact of the laptop is too old and really need to update?

  Thanks for any help that anyone is able to give.

  > Someone know a way to fix this or is it a simple fact of the laptop is too old and really need to update?

  This isn't a question of the age of the laptop
  As far as I know not that support all mobile operators
  You should first ask your mobile operator if you can use the tethering service.

  If this would be supported in my mobile operator, then connect the iphone to the laptop first
  So that you have two options: you can use the BT connection (in this case check if computer laptop also supports BT) or via a USB cable that came with the iPhone.

  (PS: as far I know to attach is supported by iOS3.0 and higher)

  After that the iphone was connected to the laptop, you must activate the tethering on iphone.
  Under settings of-> network, you should see the option internet tethering it must be enabled.
  Now you should be able to see that in the Network & Center sharing control panel.

• Satellite Pro A300 - no Internet to wide band wireless

  Hello

  I hope someone can help me. I have a TOSHIBA Satellite Pro A300 and the operating system Windows XP Professional 2002 Service Pack 3.

  I've had obviously my machine for a few years now and have never had any problems with it even though I used to always use an ethernet connection. Lately, but I moved to wireless broadband.

  When I try to install or update some programs or even just access the internet through them they claim that there is no internet connection. Although Internet Explorer and Windows updates are all still works fine. These programs include Itunes Store, Mozilla Firefox, Google Chrome, Log-me-in Vital Source Bookshelf, Adobe/Acrobat Updaters. As you can imagine it is a proplem to access updates and creates a problem with my studies that I use for my class.

  I tried other suggestions of forums such as the update of drivers, install all latest updaters for windows. However, I'm still stuck with the same exact problem.

  Can someone help me please?

  Hello

  I have to say WLAN connection is friendly and never had any problems. You can go anywhere online without cable home, which really nice and easy.

  But it strange that some features of Internet connection and other programs not

  If you connect the cable all programs have access to the Internet or you have the same problem with the cable connection?

  Maybe it's something wrong with the settings for the s WLAN card Check if you have set the correct TCP/IP parameters for WLAN card. Probably, you need a static IP address but who according to your router.

• Satellite Pro A60 and Port Replicator

  I JUST BOUGHT A SATELLITE PRO A60 AND USB2 PORT REPLICATOR. WHEN I ATTACH MY LASERJET 1100 AND PRINT A TEST PAGE IT PRINTS WELL BUT IF I PRINT A WORD DOCUMENT IT RELEASED FOR EXAMPLE GOGGLEDYGOOK. CAN YOU HELP ME?

  Hello

  I understand your problem in this way.

  You have connected the printer via Port Replicator ports for the A60 SatPro.

  Œuvres driver and so on correctly because the test page can be printed. But when you want to print from Word the printer isn't or what do you mean by "GOGGLEDYGOOK".

  Could you describe a little more detailly and give us some more information like Toshiba shipped OS or MS based installation, Service Pack installed, the name of the printer and so on...

  When you want to validate this information, it would be easier to help you!

  Bob