Satellite Pro C850-10U - corrupted hard disk drive

Similar Questions

• Satellite Pro A200 (PSAE4E) failure hard disk

  Hello

  My computer is Satellite Pro A200 (PSAE4E) purchased Oct 2007, running Vista 32 bit. He was always a bit skittish and prone to crashing. The first time I ever did a Windows Update it projected blue, so I restored and never updated since.

  The other day it started to emit beeps during startup, and while I could then get into, I think that the hard drive has failed, because now it runs very slow and crashes.

  Think the forum that this laptop could never be made to be stable and reliable?

  The hard drive is hard to change? I do it myself.

  There the drive hard replacement somewhere online instructions?

  Should what model of hard drive I install?

  Thank you

  RAID

  Hello

  Replacing the HARD drive is not difficult.
  HARD drive Bay must be placed at the bottom of the unit.
  You should see the drive Bay HARD fixed with a screw cover.
  Remove the screws and you will see the HARD drive

  To remove the HARD drive, remove the connectors

  But note; Be always careful and don't use force!

• Re: Satellite Pro L - Eventviewer displays HARD disk controller error

  I've had problems for at least two months, with slowing down, freezing same blueys etc. and eventviewer tells me that I have a HARD disk controller error. Now when I check the device it tells me - as do the dealers - work correctly, but after a chkdsk problem erases only coming later. My Toshiba characteristic of diagnosis does not work so I can't check without the use of a third-party application which I am very reluctant to do.

  I am now lost for what to do given my position of dealers who fell to something I've done / downloaded etc. All the world has any ideas on how I can get my diag back function or other than eventviewer / chkdsk to identify what's wrong?

  The machine is only 10 months with 500HDD core i5, 4 GB of RAM under Windows 7 Professional and Kasersky Pure as my ISS. I use it for general use at home and the little that is worrrying me is that even though my previous Toshiba had a HARD drive crash and had to be replaced - I might have to do a factory default or worse go format and just load a new OS on or get the drive HARD replaced at my expense ($450 last time). The drive is a Toshiba MK5055GSX and looking around locally can not see where we could be contained--if I have to.

  It has become a nightmare, and even if I took an additional guarantee that feeling of time will run out before that I get something on this subject.
  Any help would be so appreciated.

  Hi johndragon46,

  I put t know what laptop you have exactly, but the fact is if the Eventviewer indicates an error of HARD disk controller it can be both: HARD drive itself or HDD motherboard controller.

  You wrote that your laptop is only 10 months old then why n t contact you authorized service provider? Your laptop should still be under warranty and that means an ASP can fix your computer laptop free time guaranteed.

  By the way: list of authorized service providers, you can find on the official website of Toshiba

  Good luck! :)

• Can someone point out the card network for Satellite Pro C850 driver?

  Hey, I have re installed Windows 7, but I forgot to download the drivers. I needed before hand. I can t have access to the internet on this subject to update the drivers. If someone could please please find the network drivers for the Toshiba Satellite Pro C850 cards and post them here!

  I don't want to download a driver manager. Just the drivers please!

  To help we need more information. You use Win7 32 bit or 64 bit and what model of laptop you have exactly?

  Anyway, if you can access the internet with another PC you can find drivers on http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Check it out.

• Satellite L500 - hard disk drive partitioning

  Hi all (first posting times)

  I came across a little curiosity. Bought new laptop everything installed, then loaded into all the previous laptop backup files, brilliant all work...
  But then noticed was running out of space on the hard disk (drive C)?

  Why? It is a 500 GB hard drive. So I checked. Its actually a HDD 500 gig, divided into two, also. OK, understand that, first partition is C: for all files of system etc, there is d: recovery of files (using about 8 gig) then nothing else... what a mess.

  So the question, can I do the largest C: drive by reducing the D: partition? If NOT, it would make more sense then just make another partition E: for example?

  Oooh and I will make the recovery of files from damage by doing this.

  All your advice much appreciated kind.

  If it is not broken... your cheek is not hard enough *.

  Why are you doing this so complicated? HARD drive has two partitions, and you can use all that space. Toshiba has saved the recovery image of HARD drive on the second partition, but this does not mean that you are not allowed to save your data there. You can do but just don't touch or change folder HDDRecovery. Just leave it there, or make it invisible.

  This file can be used later for the installation of HARD disk image - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
  Imagine the following situation:
  You save all your stuff on the C partition and one day for some reason you cannot boot OS and it is completely unusable. What you can do? Maybe install OS again. OK good idea, but you will lose all your important data.

  In order to better is to save all the stuff on the D partition, and if something goes wrong, you can install OS using HARD drive recovery facility. This means that C partition will be formatted and clean the OS installed on it by using the image of the D partition. The point is that any data saved to the D partition will be there and you won't lose anything.

  If you want to install the OS via recovery DVD (hopefully you have created the) the whole HARD drive will be formatted and you will lose all saved data.
  I hope you understand now how it works then think of all the important data and save it as with certain external devices too.

• Satellite Pro C850-1FN stucks in the form of preparation of auto repair

  Hello

  I have a Satellite Pro C850 1FN and for some reason it stuck in a display of automatic preparation for startup repair. He will be sitting with the text on the screen, and after 8 minutes bluescreen shows then talk about a problem and then re boot PC.

  The cycle then continues.

  Any ideas greatly appreciated.

  Hello

  It looks like the repair automatic isn t possible.
  Have you tried another HARD drive recovery option?

  The HARD drive recovery process would begin the new system, but also the driver installation and would set the laptop back to factory settings.

  I think that if the system repair isn't possible, your next step should be the HARD drive recovery.
  In case the recovery of HARD drive would not work too, then you should use the recovery disc.

• Satellite Pro C850-1CW: Unknow device running Windows 7

  Hi, I recently bought the Toshiba Satellite Pro C850-1CW
  It came with windows 8 preinstalled,

  I have no use or interest in windows 8, so I formatted the hard drive and installed windows 7.
  The problem I have is that there are no windows 7 drivers avalible for this laptop.

  However, I managed to install all devices, but am left with an unknown device in Device Manager that left me completely puzzled after trying everything I could think of,

  If guys, any help would be greatly appreciated friendly, brand...

  Hello

  Have a look here in this How To doc:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  It would allow you to know which device you have and then you could find compatible drivers

  I can tell you that in many cases drivers released for other series of laptop would be too much work. You can test the drivers released for Satellite C850 (not Pro) series

• Satellite Pro C850 - missing Recovery Media Creator

  I recently bought a C850 Pro Satellite and, after update to Windows 7 and everything defining the way I like it, I tried to create a recovery media.

  However, when I click on Recovery Media Creator in the programs, the file 'TRMCLcher.exe' is not found. In fact, I can't find anywhere on the computer.

  In the directory C:/Program Files/Toshiba/Toshiba Recovery Media Creator, there is an app called "toRDC.exe" but it does not.

  Someone has ideas how to get creator of Meda recovery to run? D rather avoid the hassle to use the recovery option of hard drive partition to return to factory settings if possible, especially as I doubt m Recovery Media Creator works even in this case, I have seen ve not deleted or modified files with the program.

  Grateful for any help, thank you.

  Take a look at this page:
  http://www.MyToshiba.com.au/support/computers/Satellite/Pro/C850/pskc9a-00t019/download?OS=25

  Here, I could find the Toshiba Recovery Media Creator for Win 7 64 bit for download.
  Of course, if you need 32-bit version, you must change the settings in the upload form.

• Satellite Pro C850-15 q - failed to connect to projector

  Hello world

  I'm unable to connect a Toshiba Satellite Pro C850-15 q Part No.: PSKC9E-01JOOHEN to a projector, laptop computer does not wish to duplicate the screen for the projector.

  The laptop worked without any problem with a spotlight for months, but its only today that it is unable to connect to a projector via a VGA cable.

  So far, I have tried to use the laptop on different different projectors, but will not work on any.
  I have used different VGA cables, uninstalled the driver display and then reinstalled the latest driver, updated chipset and bios but nothing seems to work.

  Physically, the VGA port seems fine, I tried to project using FN + F4 and the windows key + P, the two options do not work. I have also a right-click on the desktop, properties, all the eyes of correct parameters, also sought to graphics options right click again this sounds all very well.

  The laptop is running windows 7 32 bit.

  Suggestions as to what to try next?

  Thank you
  Darren.

  Hello

  What exactly happens when you press Fn + F4 (or only F4)?
  Other function keys work correctly?

  The laptop seems to also support the exit HDMI port.
  Are you able to connect the laptop to an external monitor and the output video using the F4 function key?

• Satellite Pro C850-15N - some keys do not work.

  Am 90 per cent positive that this is not the fault of a broken keyboard keys do seem loose and work very well for a while.*
  --
  Basically, the other day I noticed the keys 3 and 5 were not work next to the f3 key (meaning I now have to go into the settings of brightness, whenever I want to increase it). I thought "I'll just reboot and see if that fixes anything" and he did... temporarily. I have to restart every time that I've lost the ability to use these keys, but now it does nothing.

  There is no update which should install Windows (updated 8.1 update 1 recently).
  There is no update options the keyboard driver (the box is grayed out).
  There is nothing stuck, they seem not damaged or less they touch.

  The features of my laptop;
  Name of the operating system Microsoft Windows 8.1
  Version 6.3.9600 Build 9600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of HOUSE system
  The TOSHIBA system manufacturer
  System model SATELLITE PRO C850-15N
  System Type x 64-based PC
  SKU PSKC9E-01J00JEN system
  Processor Intel Core i3 - 2328M CPU @ 2.20 GHz, 2200 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Insyde Corp. 1.60, 27/06/2012
  SMBIOS Version 2.7
  Embedded Controller Version 1.70
  BIOS Legacy Mode
  ---
  * I asked this question on the Microsoft forums and I've learned to run the troubleshooter of material (did not help) and if defective, to search for the latest drivers for keyboard - seems to me later for my model, such as the toshiba site list any keyboard updates.*
  ---
  I also grabbed the driver files if this will be of no use at all:
  PS/2 standard keyboard
  C:\Windows\system32\DRIVERS\i8042prt.sys
  C:\Windows\system32\DRIVERS\kbdclass.sys

  ---
  Can anyone give me any help? I'll buy a USB keyboard in a few weeks anyway, but for now, it's really annoying not being able to use these keyboard shortcuts: P

  > I asked this question on the Microsoft forums and I've learned to run the troubleshooter of material (did not help) and if defective, to search for the latest drivers for keyboard - I seem to have the most recent for my model, as from Toshiba Web site does not list the keyboard updates.

  It seems that this opinion is not from Microsoft staff, but some users of the forum.
  You should know that the drivers of keyboard (developed by Microsoft) are still part of the Windows System. Any Windows OS you use, the keyboard driver would be always installed as part of the OS. This means that the drivers of special keyboard DON T exist but system uses own driver...

  You can check the functionality of the keyboard in USB external keyboard.
  If external keyboard works properly, the internal keyboard is malfunctioning and must be replaced.

  If the external keyboard does not work properly too, then I recommend you to recover the laptop using Toshiba HDD recovery. Otherwise, there could be question of motherboard (keyboard controller).

• Satellite Pro C850 - peripheral Audio not installed

  Satellite Pro C850, suddenly had res cross on its icon and no noise. Says the audio device not installed. Have tried deactivation/activation and also updated, no joy.

  Can anyone help?

  Fixed it, to download a driver.

• Satellite Pro C850 - 1 M - update to Win 8.1 fails - error 0xC1900101 - 0 x 30018

  Hi all

  bought a new satellite Pro C850-1MX (PSCBZE 00M009GR) in December 2013. System works virtually unchanged to the State of delivery. Yet installed OpenOffice and Firefox, AdobeReader in most actual versions. And a updated driver for AMD GPUS to the latest version. No other changes made.

  Now I tried to upgrade to 8.1 via Windows-App-Store Windows. Download was made, run, reboot, installation of changes, preparation of devices--> restart, rollback to 8.0 with 0xC1900101 - 0 x 30018 error code upgrade.

  Searched internet solutions: Toshiba ISC
  -updated all the components Toshiba via TOSHIBA Service Station--> fact
  -(Lien: [http://www.toshiba.de/innovation/generic/windows8_1-upgrade-stepbystep/]): uninstall some components: esp. LAN/WLAN-driver.

  Hmmm... If I do I can't access to Windows App-Store to re-run the upgrade because I have no connection to the network. Stupid...

  -Why I'm updating a nearly unchanged system due to some driver-inflicted where I has not changed anything of the delivery status of can´t?

  Please indicate any tip/solution. Thank you!
  Mark

  > Now tried to upgrade to 8.1 via Windows-App-Store Windows. Download was made, run, reboot, installation of changes, preparation of devices--> restart, rollback to 8.0 with 0xC1900101 - 0 x 30018 error code upgrade.

  This error message appears because of some incompatible drivers and tools that are already pre-installed on Windows 8.

  This problem has been reported several times here in the forum and has been resolved as indicated by user harrie_1 on January 12, 2014
  Look in this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=74631

  Check that drivers must be uninstalled in Appendix a.
  [How update of Windows 8 for Windows 8.1 | http://support.toshiba.com/sscontent?contentId=4003162]

  + What is important to remove the internet connection. +
  + Only use to download 8.1 and then disconnect (also the Lan cable) +.
  + After Win start 8.1 for the first time do not connect to the internet. +

  + On another pc download first for 8.1 audio, realtek wlan and bluetooth drivers and driver display. +
  + Install and reboot after that when system is stable, you can connect to the internet and download the updates of windows. +

  PS: this thread should be closed to avoid the misunderstandings and because the other thread already exists

• Windows 8 to 8.1 upgrade is not possible on Satellite Pro C850-1MX

  Hello Forum users,.

  Sorry for my bad English. I'll try my best ;-)

  I'm trying to upgrade Windows 8.0 8.1 on a Satellite Pro C850-1MX.

  Before that I removed:
  -Realtek Audio Driver
  -Realtek WLAN Driver
  -Bluetooth filter Driverpackage
  -Toshiba Health Monitor

  I also checked the notebook with the update of the Windows Advisor 8 / attend.

  Whenever I try the update is installed, the computer restarts and says while the previous version is restored because the update failed (0xC1900101 & 0 x 30018).

  I tried to restore the laptop to factory (using the recovery partition), deleted the drivers, tried again. Same failure.

  Where is the problem?
  Someone at - it an idea?
  I Don t know what to do then.

  Thank you!!

  Thiemo

  Hello

  Upgrade the win 8 to 8.1 win, to follow some step by step instructions:
  This can be found here: [how update of Windows 8 for Windows 8.1 | http://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/]

  Note: after installing Windows 8.1 drivers Toshiba and tools needs to be updated in the correct order.
  The Win 8.1 driver installation instruction can be found on the page of the Toshiba UE driver you laptop model section.

• Satellite Pro C850 - WLAN call default after installing Win 7

  Hello

  I own a C850-1 gr (PSCBXE), which comes with Win8.
  I bought Win 7 32 bit Home Premium and reinstalled from scratch.
  Later I installed the drivers from toshiba support page in the following order:

  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  ATI HDMI Audio Driver
  HD SRS Premium Sound Technology
  Synaptics Touch Pad Driver
  Realtek LAN Driver
  Realtek driver LAN wireless
  Intel Wireless Display
  Filter driver package Realtek Bluetooth
  Bluetooth monitor
  Intel USB3.0 driver
  Realtek card reader
  TOSHIBA Value Added Package
  Sleep TOSHIBA utility
  TOSHIBA resolution + plug-in for Windows Media Player
  TOSHIBA Media Controller
  TOSHIBA Media Controller plugin
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  PatchFiles PCIIDEREG - 1.2
  PatchFiles

  When installation is complete, WLAN fails after reboot, alternating.
  This means:

  * First boot: WIFI OK *.
  * Second startup: WLAN failed *.
  * Third start-up (= first boot): WIFI OK *.
  * Fourth Starter (= second boot): WLAN failed *.
  *...*
  * and Yes guess

  Lack of resources, the WLAN icon is displayed for a few seconds, then "no network" icon.

  Any help is greatly appreciated.

  Hello

  Your order of installation of drivers contains the Intel WLan driver.
  But the laptop Satellite Pro C850-1 GR was equipped with the Realtek RTL8723AE WLan/BT combo card.

  I think that you need to uninstall the Realtek WLan driver and WLan Intel driver.
  In addition, you must pay attention to the functionality of BT.

  The card is compatible with the BT and you need to install the driver Package Realtek Bluetooth filter before installing the battery Toshiba BT.

  In addition, do not forget that this WLan adapter is enabled by using the FN + F12 (or just the F12)

  Finally and above all do not forget WHAT BIOS the dafault value

• Re: Satellite Pro C850-15 t - device pointer does not work

  Hi all

  A few weeks before it has the feature of pointer (touchpad) on my TOSHIBA laptop suddenly stopped working for me. Ever since the error, I have connect a mouse to the laptop via a USB port, which can and has become rather a nuisance. Unfortunately, I have not the slightest idea when technology is wrong, but is there a way that the error can be corrected?

  Laptop model: SATELLITE PRO C850-15 t

  Thank you very much!

  -rcotterill

  What kind of error is displayed exactly?
  I do not know what operating system you use, but have you tried to reinstall the driver for the touchpad?