Satellite Pro C850-1FN stucks in the form of preparation of auto repair

Hello

I have a Satellite Pro C850 1FN and for some reason it stuck in a display of automatic preparation for startup repair. He will be sitting with the text on the screen, and after 8 minutes bluescreen shows then talk about a problem and then re boot PC.

The cycle then continues.

Any ideas greatly appreciated.

Hello

It looks like the repair automatic isn t possible.
Have you tried another HARD drive recovery option?

The HARD drive recovery process would begin the new system, but also the driver installation and would set the laptop back to factory settings.

I think that if the system repair isn't possible, your next step should be the HARD drive recovery.
In case the recovery of HARD drive would not work too, then you should use the recovery disc.

Tags: Toshiba

Similar Questions

  • Satellite Pro A300 - upgrade RAM of the former model A200

    Hello

    I need an advice. I just took a memory (Samsung) 1 GB of more old model Satellite A200 module and put it on my new model Satellite Pro A300. Here is the information about the SPD:

    _Original (which has been installed in the factory): _

    DIMM1: Kingston (2 GB DDR2-667 DDR2 SDRAM)
    Manufacture Date week 20 / 2009
    @ 333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-43-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
    @ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
    @ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-26-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)

    _From old Toshiba Satellite A200: _

    DIMM3: Samsung M4 70T2953EZ3-CE6
    Manufacture Date week 42 / 2007
    @ 333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-35-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
    @ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-28-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
    @ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-21-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)

    According to the information provided was it a good or bad idea? I mean differences in the SPD and will this performance, stability, etc. ?

    Thanks a lot for your time!

    Hi xosman,

    According to the information that you have posted it seems that the other Satellite A200 module has the same specifications, so if your laptop works with this module it s no problem I think.

    Satellite A200 A300 using the same memory modules DDR2 so change the RAM is no problem.

  • Satellite Pro L100 - letter stuck on the keyboard

    Especially whenever I start my laptop I have a constant beep not in order specific just constant beep as usually when you hold a key in and also I'm getting a lot of windows and files opening when I'm on the internet explore or using msn help.

    It has become very frustrating and as I've only had the phone for 1 month now I n t think this should happen.
    Any help would be great thanks in advance.

    Mark

    Hello Mark

    For a month, I have the same unit in my office and I really didn't have such problems. So far, everything works fine. I recommend as a first step to disconnect any external devices connect the power running and try to restore the operating system on time earlier.

    Maybe everything will be OK again. If this isn't the case, please post again.

    By the way: I recommend you to update the BIOS to the latest version available. If you do this please read the instructions carefully.

  • Satellite Pro C850 - 1 H 8 - upgrade the BIOS CPU support

    Hi there are people.

    I'm wandering if there is a possibility of upgrade of the i5 3230 m which is currently in my Satellite Pro C850 - 1 H 8.

    Looking at the options available in the decision-making FCPGA988 and chipset Intel HM70 there seems to be a variety of the i7 available for use.

    The laptop supports processors with a TDP plu max than 35w?
    The bios supports all the CPU upgrade options?

    Cheers, Nick

    In this forum, you will find various discussions on the theme of CPU upgrade.
    I found this one:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=75073

    Paolo and Macius posted some information about the situation of CPU upgrade.
    As you can read in another thread, the CPU upgrade isn't supported. Updates can be made at your own risk, and no one can say if CPU supported by the chipset would be supported by the BIOS.
    Test it if you want, but it's at your own risk.

  • Cannot install the update of video player on three Satellite Pro C850

    I have 3 Satellite Pro C850-A-10Z, A - 15V and A - 15 q
    They are all running Windows 7 64 bit

    They have all the Tempro messages recently received on an update of the video player
    Toshiba service Center detects an update, but it will not install on any of them - no error message given.

    I tried to install it manually by following the link Tempro and download
    11/02/15 5.3.49.124 video player

    The update runs, and then displays the message
    "cannot find our player in your system. Installation interrupted.

    I thought that the Toshiba service center was supposed to report updates.
    Nobody knows what could happen here?

    Hello

    Are all the three machines pre-installed with the original version of operating system that has been delivered with the machine?

  • Can someone point out the card network for Satellite Pro C850 driver?

    Hey, I have re installed Windows 7, but I forgot to download the drivers. I needed before hand. I can t have access to the internet on this subject to update the drivers. If someone could please please find the network drivers for the Toshiba Satellite Pro C850 cards and post them here!

    I don't want to download a driver manager. Just the drivers please!

    To help we need more information. You use Win7 32 bit or 64 bit and what model of laptop you have exactly?

    Anyway, if you can access the internet with another PC you can find drivers on http://www.toshiba.eu/innovation/download_drivers_bios.jsp

    Check it out.

  • Satellite Pro L300-1FN does not start - hang at the BIOS splash screen

    My Satellite Pro L300-1FN refuses to start. When turned on the laptop displays the home screen toshiba/insyde H20 BIOS and the message "press F2 go to the Setup utility, F12 to go to the start menu" and flashes the light access to the hard drive, but don't try to continue loading. I left the bios at the start screen, but it doesn't do anything for long hours on a power supply or is running the battery flat while on battery.

    Is there a way to re - put the BIOS on this unit? If it's a desktop unit I would remove the CMOS battery to force a reset of the BIOS but that's impossible on a laptop. The hard drive is fine because I have it plugged into another system to remove valuable data.

    Hello

    What happens if you press F2 when starting the laptop to the top?
    You can access the BIOS?
    If so, access the BIOS and set its default value. I think you need to press F9 or F10 to get default parameters, but this will be mentioned at the bottom of the page of the BIOS.

    Check it!

  • Satellite Pro C850-15N - some keys do not work.

    Am 90 per cent positive that this is not the fault of a broken keyboard keys do seem loose and work very well for a while.*
    --
    Basically, the other day I noticed the keys 3 and 5 were not work next to the f3 key (meaning I now have to go into the settings of brightness, whenever I want to increase it). I thought "I'll just reboot and see if that fixes anything" and he did... temporarily. I have to restart every time that I've lost the ability to use these keys, but now it does nothing.

    There is no update which should install Windows (updated 8.1 update 1 recently).
    There is no update options the keyboard driver (the box is grayed out).
    There is nothing stuck, they seem not damaged or less they touch.

    The features of my laptop;
    Name of the operating system Microsoft Windows 8.1
    Version 6.3.9600 Build 9600
    Another Description of the OS is not available
    Manufacturer of operating system Microsoft Corporation
    Name of HOUSE system
    The TOSHIBA system manufacturer
    System model SATELLITE PRO C850-15N
    System Type x 64-based PC
    SKU PSKC9E-01J00JEN system
    Processor Intel Core i3 - 2328M CPU @ 2.20 GHz, 2200 Mhz, 2 Lossnay, 4 logical processors
    BIOS Version/Date Insyde Corp. 1.60, 27/06/2012
    SMBIOS Version 2.7
    Embedded Controller Version 1.70
    BIOS Legacy Mode
    ---
    * I asked this question on the Microsoft forums and I've learned to run the troubleshooter of material (did not help) and if defective, to search for the latest drivers for keyboard - seems to me later for my model, such as the toshiba site list any keyboard updates.*
    ---
    I also grabbed the driver files if this will be of no use at all:
    PS/2 standard keyboard
    C:\Windows\system32\DRIVERS\i8042prt.sys
    C:\Windows\system32\DRIVERS\kbdclass.sys

    ---
    Can anyone give me any help? I'll buy a USB keyboard in a few weeks anyway, but for now, it's really annoying not being able to use these keyboard shortcuts: P

    > I asked this question on the Microsoft forums and I've learned to run the troubleshooter of material (did not help) and if defective, to search for the latest drivers for keyboard - I seem to have the most recent for my model, as from Toshiba Web site does not list the keyboard updates.

    It seems that this opinion is not from Microsoft staff, but some users of the forum.
    You should know that the drivers of keyboard (developed by Microsoft) are still part of the Windows System. Any Windows OS you use, the keyboard driver would be always installed as part of the OS. This means that the drivers of special keyboard DON T exist but system uses own driver...

    You can check the functionality of the keyboard in USB external keyboard.
    If external keyboard works properly, the internal keyboard is malfunctioning and must be replaced.

    If the external keyboard does not work properly too, then I recommend you to recover the laptop using Toshiba HDD recovery. Otherwise, there could be question of motherboard (keyboard controller).

  • Satellite Pro C850 - missing Recovery Media Creator

    I recently bought a C850 Pro Satellite and, after update to Windows 7 and everything defining the way I like it, I tried to create a recovery media.

    However, when I click on Recovery Media Creator in the programs, the file 'TRMCLcher.exe' is not found. In fact, I can't find anywhere on the computer.

    In the directory C:/Program Files/Toshiba/Toshiba Recovery Media Creator, there is an app called "toRDC.exe" but it does not.

    Someone has ideas how to get creator of Meda recovery to run? D rather avoid the hassle to use the recovery option of hard drive partition to return to factory settings if possible, especially as I doubt m Recovery Media Creator works even in this case, I have seen ve not deleted or modified files with the program.

    Grateful for any help, thank you.

    Take a look at this page:
    http://www.MyToshiba.com.au/support/computers/Satellite/Pro/C850/pskc9a-00t019/download?OS=25

    Here, I could find the Toshiba Recovery Media Creator for Win 7 64 bit for download.
    Of course, if you need 32-bit version, you must change the settings in the upload form.

  • Screen bezel for Satellite Pro C850 - 1 M 7 needed

    Hello
    Someone at - it helps me find a bezel replacement screen for a Satellite Pro C850 - 1 M 7 please?

    eBay gives just generic and I can't find anything on this site or the other.
    Thank you very much
    :)

    Laptop parts are not available for sale. No laptop manufacturers etc. Toshiba page you will not find anything.
    Or, you can try to order by a Toshiba service provider or some independent stores. Usually the Googling around you should be able to find it for Satellite Pro or maybe some Satellite C850. The parts must be the same.

    I don't know where you want to live, and it is not easy to help looking for a direct link to order.

  • Satellite Pro C850-15 q - failed to connect to projector

    Hello world

    I'm unable to connect a Toshiba Satellite Pro C850-15 q Part No.: PSKC9E-01JOOHEN to a projector, laptop computer does not wish to duplicate the screen for the projector.

    The laptop worked without any problem with a spotlight for months, but its only today that it is unable to connect to a projector via a VGA cable.

    So far, I have tried to use the laptop on different different projectors, but will not work on any.
    I have used different VGA cables, uninstalled the driver display and then reinstalled the latest driver, updated chipset and bios but nothing seems to work.

    Physically, the VGA port seems fine, I tried to project using FN + F4 and the windows key + P, the two options do not work. I have also a right-click on the desktop, properties, all the eyes of correct parameters, also sought to graphics options right click again this sounds all very well.

    The laptop is running windows 7 32 bit.

    Suggestions as to what to try next?

    Thank you
    Darren.

    Hello

    What exactly happens when you press Fn + F4 (or only F4)?
    Other function keys work correctly?

    The laptop seems to also support the exit HDMI port.
    Are you able to connect the laptop to an external monitor and the output video using the F4 function key?

  • Satellite Pro C850-1HD: valid guarantee after RAM upgrade?

    I work with a laptop Toshiba Satellite Pro C850-1HD in the warranty period, and I would like to know whether to extend the warranty for laptop RAM is maintained.

    Thank you

    > I would like to know whether to extend the warranty for laptop RAM is maintained.
    RAM upgrade does NOT affect the warranty.

    Here you can find instruction and nice workaround how to replace Toshiba Satellite Pro C850 modules series
    [Satellite Pro C850 / L850 - Memory Module replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU2603BZ0000R01.htm]

  • Satellite Pro C850 - strange problem with LAN connection

    Hello world

    I just signed up on this forum because I hope you guys can help me with a really strange problem.

    I recently bought a Satellite Pro C850-1MX
    It came with Win8, but given that I don't really like Win8, I bought an additional Windows 7 Pro (64 bit) license and installed on the laptop.

    The problem I describe, also arrived on 8 to win, which makes it even more strange.

    As soon as I connect a cable to the RJ-45 port, Windows tells me, that the LAN connection is not connected.
    As soon as I unplug the cable, Windows starts looking for a network and actually found one!

    So, the only way to connect to my LAN cable is... I have activate the LAN connection, wait that it detects a network (without the cable connected!) and meanwhile to connect the cable to the network port.
    Now... If I disconnect the cable once again, Windows still shows its connected.

    I must say, that I am a Director of professional network for more than 10 years now, so I should know my systems, but this never happened to me before. Event log shows nothing, re-installing drivers did nothing either. IM quite confused here and I hope you guys can help me.

    Thanks for reading, and let me know if you need any additional info!

    Greetings from the Germany,
    Sandro

    Hello Sandro,

    To be honest I confused m.

    I would try to start talking about the drivers installed, since you changed the system for Win 7.
    All the network devices, such as card WLan and LAN card are properly recognized in Device Manager?

    As I m not wrong not the laptop was equipped with a network card Realtek-8111F (1000BASE-T/100Base-TX/10Base-T) and WLan RTL8723AE Realtek b/g/n card.
    If both should appear in the device properly Manager if you have installed the drivers correctly.

    2nd question:
    You said:
    > As soon as I unplug the cable, Windows starts looking for a network and actually found one!
    Are you sure that you speak of LAN and WLAN?
    For me it made no further since. If the network cable is unplugged, the notebook would connect to the WLan where WiFi is enabled.

  • Satellite Pro C850 - how to activate 'Numlock' on startup

    Hi all

    No one knows how you can activate the "Numlock" key to start the laptop.

    Concern: Satellite Pro C850 - 1LN

    I look in the BIOS (6.70) > advanced... but find nothing
    I am also looking Windows 8.1, but also without success.

    Any idea to help me?

    Thanks in advance.

    Marc

    Hi Marc

    As much as I know there is no certain special option to turn on the num lock and you can not define is as default to be always enabled. Extra keypad on the keyboard is designed for use with different applications such as Office Excel and allow you an entry comfortable numbers in some document.

    On my laptop (P500), I noticed that when I turn off laptop with active NumLock will be on next start so let is all the TIME.

  • Satellite Pro C850 keyboard does not work properly and opens several programs

    My satellite pro C850 1HE keyboard intermittently stops working correctly, and begins to open programs, for example, by pressing F will open the file search, C open computer this kind of thing

    is there a permanent solution to this problem?

    This is not something to do with installed programs is not something to do with the browser settings.
    restarting the computer works in a short time, but that is a long time, it's really annoying because I use this for work and study!

    > is there a permanent solution to this problem?

    The question is what causes this problem? Is it related hardware or software related issue?

    Why n t connect a USB keyboard just to check if the same would happen?

    In case the USB keyboard would work fine, I guess that the internal keyboard failures and the solution would be a simple replacement of the defective part.

Maybe you are looking for