Satellite Pro C850 - problems with WiFi after Windows update 8.1

Similar Questions

• Satellite Pro C850 does not work after Bios Update

  My satellite pro c850 cd does not work after updating the bios of toshiba.

  What should I do?

  Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
  Flash the BIOS correctly?

  Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

  In most cases a special disc of crisis of the BIOS would be required to operate
  Not sure if you can get it repaired by your own
  Check this thread. Maybe this helps:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

  Otherwise you need help of the authorized service provider available in your country.

• Satellite L70-A-118 - problems with WiFi after Windows 8 to 8.1 Win update

  Dear Sir/Madam,

  After that update of Windows 8 for Windows 8.1 WiFi disconnects regularly and if there is a connection
  the connection is limited.

  I followed the update instructions I downloaded with the Windows 8.1 drivers.

  The WiFi LAN adapter settings are intact on DHCP.

  Waiting for assistance to help me a stable wifi connection.

  Kind regards

  Low van Leeuwen

  Two weeks ago I've updated my Satellite U940-103 and everything went well. There is no problem with WLAN. I use it all the time.

  What model of laptop do you have?
  Have you installed the driver for the Toshiba download page or driver provided by Windows update (sometimes classified as important update)?

• Problems with printer after windows update on Vista

  I am running Vista Home premium 32-bit with SP1 and have an Epson SX215 printer. I have Noton antivirus installed.

  My printer will not respond after installation of recent updates. Remiain of items in the queue for printing and the caanot be deleted. I tried Mr. Fixit for printer problems, but it just crashes evenn after leaving 2 hours to run! I tried the system restore, but I just get a message saying "unknown error found no changes."

  I can solve the problem by resetting the PC to the settings to factory, but when I load these recent windows updates again that the problem comes back.

  Help, please!

  Hello

  What updates caused the problem to occur?

  Look for updates in the update history.

  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  c. to display more information about an update, double-click it.

  I suggest that you realize the following methods and check if they help to solve the problem.

  Method 1:

  (a) click Start, go to control panel

  (b) select system and Maintenance

  (c) select administrative tools

  (d) double click on Services

  (e) in the services list, scroll down until you find one called "print spooler".

  (f) make a right clic on "Print spooler" and "restart".

  (g) "suppression" of work will be lost and all work queued in your queue will print.

  Method 2:

  I would completely uninstall and reinstall Epson SX215 printer driver package.
   
  a. open devices and printers, click the Start button, and then click the start menu, click devices and printers.

  b. right-click on the printer you want to remove, click on remove the device and then click Yes.

  If you can't delete the printer, right-click again, click Run as administrator, click on remove the device and then click Yes.

  Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. now, reinstall the printer . Note: Valid link also for Windows Vista.

  Method 3:

  If the above didn't help, restore settings PC and install the updates one by one and refrain from installing the update (although not recommended) which is the origin of the problem.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Problems with printer after windows updates 14th Dec2011

  December 14, 2011, downloaded the windows updates now, I don't see my network printer. I have a mac, a computer laptop xp pro and a win7 pro, mac workstation still sees the printer and it works. Computer laptop xp can't find any, work stations can be found, but it will not print correctly. The printer is a laserjet 1022n, it has the latest firmware and two windows machines have drivers elatest th. Help!

  Hello

  ·         Your computer is on a domain network?

  Follow the form as follows article and check if that helps.

   

  How to use Windows XP to share a printer with other people on your network

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  See also:

  Cannot print to a network in Microsoft Windows shared printer

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02030510&tmp_task=solveCategory&cc=us&DLC=en&JumpID=reg_R1002_USEN&LC=en&product=439323

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

• Satellite Pro M70 - problems with installed after Realtek sound

  Long story - but due to lack of disk space, my son removed some directories and lost avisnon sound. He seems to have deleted Realtek and Adobe Flash Player.

  Have reistallede the two but once installed Realtek there is a sharp wail when the PC is shut down and restarted AND when something is played on iPlayer or YouTube - the image isn't smooth either - very choppy. If I uninstall Realtek image on the iPlayer is good - but no sound. I installed Realtek numerus sites with the same result. The sound is OK on Spotify, for example.

  Unfortunately impossible to restore to before that he made the deletion - no doubt, he had no space to make a point of control.

  Thank you

  Marilyn

  It strange s I ve idea now what your son removed from the HARD disk, but all the story sounds really mysterious, I mean the Realtek audio driver should not affect video playback or movie that really strange s
  A system restore is perhaps the best idea to get this problem resolved

  > but I had to download RegCure - this will come off if I restore
  Using the recovery disc disc HARD integer should be formatted, so you will need to download RegCure

• Problems with WiFi after put 10.11.2 up-to-date.

  Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

  Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

  Thank you in advance for the answer...

  Hi Captainsniz

  There are a few things to try. Keep doing this until the problem disappears.

  First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

  Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

  Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

  You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

  You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

  Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

  Be sure to back up your computer.

  Hope this helps, Greg

• Satellite Pro C850 - WLAN call default after installing Win 7

  Hello

  I own a C850-1 gr (PSCBXE), which comes with Win8.
  I bought Win 7 32 bit Home Premium and reinstalled from scratch.
  Later I installed the drivers from toshiba support page in the following order:

  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  ATI HDMI Audio Driver
  HD SRS Premium Sound Technology
  Synaptics Touch Pad Driver
  Realtek LAN Driver
  Realtek driver LAN wireless
  Intel Wireless Display
  Filter driver package Realtek Bluetooth
  Bluetooth monitor
  Intel USB3.0 driver
  Realtek card reader
  TOSHIBA Value Added Package
  Sleep TOSHIBA utility
  TOSHIBA resolution + plug-in for Windows Media Player
  TOSHIBA Media Controller
  TOSHIBA Media Controller plugin
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  PatchFiles PCIIDEREG - 1.2
  PatchFiles

  When installation is complete, WLAN fails after reboot, alternating.
  This means:

  * First boot: WIFI OK *.
  * Second startup: WLAN failed *.
  * Third start-up (= first boot): WIFI OK *.
  * Fourth Starter (= second boot): WLAN failed *.
  *...*
  * and Yes guess

  Lack of resources, the WLAN icon is displayed for a few seconds, then "no network" icon.

  Any help is greatly appreciated.

  Hello

  Your order of installation of drivers contains the Intel WLan driver.
  But the laptop Satellite Pro C850-1 GR was equipped with the Realtek RTL8723AE WLan/BT combo card.

  I think that you need to uninstall the Realtek WLan driver and WLan Intel driver.
  In addition, you must pay attention to the functionality of BT.

  The card is compatible with the BT and you need to install the driver Package Realtek Bluetooth filter before installing the battery Toshiba BT.

  In addition, do not forget that this WLan adapter is enabled by using the FN + F12 (or just the F12)

  Finally and above all do not forget WHAT BIOS the dafault value

• Satellite Pro C850-1CW: Unknow device running Windows 7

  Hi, I recently bought the Toshiba Satellite Pro C850-1CW
  It came with windows 8 preinstalled,

  I have no use or interest in windows 8, so I formatted the hard drive and installed windows 7.
  The problem I have is that there are no windows 7 drivers avalible for this laptop.

  However, I managed to install all devices, but am left with an unknown device in Device Manager that left me completely puzzled after trying everything I could think of,

  If guys, any help would be greatly appreciated friendly, brand...

  Hello

  Have a look here in this How To doc:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  It would allow you to know which device you have and then you could find compatible drivers

  I can tell you that in many cases drivers released for other series of laptop would be too much work. You can test the drivers released for Satellite C850 (not Pro) series

• Problems with Wifi on windows 8

  Dear Microsoft

  I report a serious problem with loss of WiFi connectivity on windows computers 8. Sometimes many different problems occur when trying to restart our system of windows 8, after that we had problems with our applications, we had problems with WiFi connectivity on our computer that shipped with 8 64-bit windows. Please take this issue seriously and solve this problem as soon as possible... Can you please do a few good deeds as the determination of the loss of WiFi connectivity on our computer?

  Thank you for the problems I have with windows 8.

  To avoid confusion and duplication of effort, please post all further follow-up replies to your original-online http://answers.microsoft.com/en-us/ie/forum/ie10-windows_8/ie-10-issues/c0ac0ed8-ddc0-4a7c-8f08-7f84f2ddcded thread (March 8, 2013 & ff)

• Satellite Pro C850-1HD: valid guarantee after RAM upgrade?

  I work with a laptop Toshiba Satellite Pro C850-1HD in the warranty period, and I would like to know whether to extend the warranty for laptop RAM is maintained.

  Thank you

  > I would like to know whether to extend the warranty for laptop RAM is maintained.
  RAM upgrade does NOT affect the warranty.

  Here you can find instruction and nice workaround how to replace Toshiba Satellite Pro C850 modules series
  [Satellite Pro C850 / L850 - Memory Module replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU2603BZ0000R01.htm]

• Satellite Pro C850 Wi - Fi lost after updating BIOS

  Today I received the notification of an update of the bios,

  I completed the update of the bios, but when the laptop restarts I had lost the Wi - Fi connectivity and now cannot connect via Ethernet.

  I looked online for answers, but the links I presented m with doesn't seem to work.

  I think I need to restore the bios to the previous version but can t find what to do.

  I have a Satellite Pro C850 - 14 c

  Will you please help if you can because it's ridiculous for Toshiba released a update that actually loses some of the functions to portable computers, especially the main function of a laptop that is portability.

  Thanks in advance

  What do you mean with lost?
  You can enable and disable the wireless network card?

• Satellite Pro A300: Problem with Microsoft Security Essentials

  Hello

  I have a Toshiba Satellite Pro A300 with XP SP3 and now deleted AVG Free and installed Microsoft Security Essentialls (MSE).

  The result is after installing MSE and begin my laptop cursor is stuck in the center of the screen and will not respond to the inputs of the mouse or the keyboard.

  In aid of F12 to get my startup options allowed me to try the Safe Mode and last known good Configuration etc but they all show the same functionality, IE freeze when the desktop appears. XP seems to be operating in the background, for example system clock stays on time, "notice" system if its wifi singal is removed etc.

  Just to make the day to try to do an OS reinstall pressing 0 to on has no effect - system just boots in XP - so I can't my recovery partition!

  I have now is not a HW problem as the /kbd cursor works if I boot into a non-windows system, for example UBUNTU CD

  Any suggestions welcome - such as can I download a recovery on antother PC CD and burn a recovery CD?

  Hello

  I have no idea what happened after installing Microsoft Security Essentials, but it seems that you are not able to access the files on the HARD drive
  I think you need to reinstall the operating system using HARD drive recovery.
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  But this would format the system partition :(

  In order to save the files from the HARD drive, I recommend using / boot from a bootable floppy from Win PE.
  Win PE (also called BartPE) is a thin window OS that is bootable CD and don t need to be installed on the HARD drive.
  http://en.Wikipedia.org/wiki/Windows_Preinstallation_Environment

  Select this check box.

• Satellite Pro C50-A-154 - battery after automatic update problems

  Hello world!

  First of all, I must apologize for my bad English, if it is not as good as be... after that, I could start to tell you all what happened to me in the last few weeks...

  I have an a C50-A-154 Toshiba Satellite Pro and I use it for stuff like watching youtube videos, listening to music, and do this kind of thing than a normal user.

  A few weeks ago a Toshiba Tempro Alert remember that there are software updates avaliables to download for my laptop, so I installed them, I normally unplug my battery when I have the power cord plugged in, so I didn't realize after a week after that my battery was not recognized as it should be for my toshiba.

  Initially, windows said that it is fully charged and no need to continue to load, so I unplugged the power cord and the laptop shutted down (with battery connected and therefore be charged to 100%).

  When I plugged it again the power supply cable, windows said that the battery was empty and told them, hip but not load...

  At the same time, a new toshiba update was released, this time was for the bios, if I have that it is probabbly fix the problem with the battery, so I updated the BIOS and windows says that the battery was full charged... I couldn't believe...!

  But the system always goes down when yo unplugg the AC cord, and now battery said once again that it is empty...

  Yesterday was a new update for the Bios, so I give another chance, but nothing has changed... I can't use the battery, and I have no warranty, so I don't know what to do...

  I read a lot of posts on battery of problems lately, in the forums of europe and US forums... maybe it's a software problem? Maybe toshiba boys don't have any idea about this problem?

  Thanks for your replies!

  Ruckmess

  Hello

  I think it might be a software related issue.
  In Device Manager, you will find the battery input compatible Micorsoft ACPI method. It belongs to the Advanced Configuration and Power Interface.

  I recommend you to uninstall the three topics that you might find in the battery area.

  Reboot the laptop. After restarting again, the system should install all devices removed once more.
  Usually, this should help to unravel the question in the case of its just system problem

• HP laptop - 15-r150nm: problem with wifi after update realtek adapter

  Hello! I've updated some drivers of HP customer service and then restarted computer. When it is on I couldn't use wifi. When I select the problems, it says: 1) "" Realtek 802.11B/G/N WIFI adapter RTL8723BE has some problems to the program control or hardware. "" (it is Croatian, so I tried to translate it for you)

  (2) "a network cable is not plugged in correctly or may be broken.

  What should I do, I have only this laptop and internet wifi, write this work? Thank you!

  Hi @frane53nja,

  Welcome to the HP Forums!

  This is a wonderful place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that your laptop works OK and after updating drivers on reboot HP customer service, you have lost your wireless network. When you run the Windows troubleshooting tool, you received a message that there was a problem with the NIC due to recent hardware or software changes.

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  Before you perform a restore, as shown in the above troubleshooting steps, you can try this option.

  Go to the nursery of the device

  Click the network tab to expand the list.

  Right-click on the wireless network adapter and select roll back driver.

  Repeat this process for all types of adapters listed.

  While on this screen please check this definition also.

  Right click on the wireless adapter and choose Properties.

  Click the power management tab.  If "allow the computer to turn off this device to save power" is checked, please remove and click OK. Repeat this operation for all types of adapters listed.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.