Satellite Pro C850 - strange problem with LAN connection

Similar Questions

• Satellite Pro C850-15 q - failed to connect to projector

  Hello world

  I'm unable to connect a Toshiba Satellite Pro C850-15 q Part No.: PSKC9E-01JOOHEN to a projector, laptop computer does not wish to duplicate the screen for the projector.

  The laptop worked without any problem with a spotlight for months, but its only today that it is unable to connect to a projector via a VGA cable.

  So far, I have tried to use the laptop on different different projectors, but will not work on any.
  I have used different VGA cables, uninstalled the driver display and then reinstalled the latest driver, updated chipset and bios but nothing seems to work.

  Physically, the VGA port seems fine, I tried to project using FN + F4 and the windows key + P, the two options do not work. I have also a right-click on the desktop, properties, all the eyes of correct parameters, also sought to graphics options right click again this sounds all very well.

  The laptop is running windows 7 32 bit.

  Suggestions as to what to try next?

  Thank you
  Darren.

  Hello

  What exactly happens when you press Fn + F4 (or only F4)?
  Other function keys work correctly?

  The laptop seems to also support the exit HDMI port.
  Are you able to connect the laptop to an external monitor and the output video using the F4 function key?

• Strange problem with LAN on Satellite P10 connection

  Since yesterday I get really annoying balloon popup (it appears at intervals a decade or less seconds:(qui dit: câble débranché, mais le réseau fonctionne très bien (avec quelques retards quand il montre)))
  I wonder is this a hardware in my laptop problem or a problem with the internet provider. I have Realtek RTL8139/810 x LAN card. I checked another cable and of the ToolTip always shows :(
  Help, please

  Post edited by: motomadness

  Hello Adam

  On this path, it is not easy to say anything. I recommend you test somewhere else to make sure if this problem occurs due to material.

• Satellite Pro A10 - Wifi problem with router ZyXEL

  Hello

  I recently acquired a Satellite Pro A10 (PSA15E - 0115Q - EN) off the coast of the friend. It doesn't have a wireless card installed, but I managed to take of a Lucent MPC13A-20 that was installed without any problem, and it is recognized as a Toshiba Wireless LAN Mini PCI Card. However, despite the computer being able to read my neighbors wifi (next door and in the apartment on the floor), he refuses to acknowledge my router, even if I'm in the same room. My router is a ZyXEL P-660HW-T1 v2 which works very well (I tested it with another laptop).

  Can someone please help!

  Thanks in advance,
  Fred

  Hello!

  Make sure your router is using a WiFi standard that supports your card. If you use 802.11n you should drop down to 802.11 g for the tests.

  In addition, you should check the channel of your wireless network card. It should be the same as the router.

  Good bye

• Satellite Pro L850 1DR - problems with Windows 7 update KB2887069

  I have problems to install the KB2887069 update.

  It seems to install OK... prompt me to restart... when I do it, says it configures... GETS to 7%, then starts rebooting... watch it configures again... up to 7 or 9%... and then reports it is defect and restoring... restarts again... and it is quite... not installed and reference to Windows Update confirms it failed.

  All the other updates I had installed today very well once I realised KB2887069 was the problem and failed to update.

  I am running Win 7 Prof Serv Pack 1 64 - bit on a Toshiba Satellite Pro L850 1DR. I use my AV Microsoft Security Essentials software.

  For now I had to hide the update... but all of the bright ideas how overcome the problem. I tried the Microsoft site, but there is still no answers who brought a solution for me.

  Thanks in anticipation!

  I googled around for KB2887069 update and it seems that you are not alone with this problem to Microsoft Update. I also found your request in the forum, Ms.

  In other words, that's not a problem of mobile by this must be resolved by Microsoft.

  I read in the MS forum on this issue and this issue is still under investigation.

• Satellite Pro C660-1J3 - problem with OpenGL / Edrawing

  Hello

  I hope you can help me with the following problem:

  I need to work a program that we OpenGL for drawing, but still the program does not work if it opens the drawings, the following information, always on the screen:

  "OpenGLView: EnableRenderContext failed" and the stop-work program.

  So I dry to update the driver grafik, but it does not work. I found a thread on this forum, but http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67241 his looks.

  I am at the part:

  Thank you, useful, but still having problems. I downloaded "Intel® Chipset Device Software (INF Update Utility) v 9.3.0.1019" and installed it the way you say, but the computer says I'm already under the latest version of the driver, which the computer is 8.15.10.2622. I'm running Windows 7 x 64 Home Premium. I can't forget the old version and use the new version.

  I don't really know the command SETUP-OVERALL, where I can find this command...

  Please help me, I need the program to work!

  Computer laptop-type: Satellite Pro C660 - 1J3 PSC0RE and I we Windows 7 Professional 64 bit

  Thank you alex
  PS Sorry for my English ;)

  Post edited by: alexk

  Hello

  I think the drawing application needs the graphics driver that supports OpenGL.
  To my knowledge, the driver of the Intel page should already contain the OpenGL.
  The Satellite supports graphics Intel HD (Intel HM55) so I think that you should use the driver from the Intel page, even if the update utility indicates that you are using the latest driver.

  I think that you need to uninstall the old driver through the Device Manager.
  In addition, check whether it should be uninstalled in the control panel-> software.

  Then download the latest driver for the Intel HM55 chipset, and install it via the Device Manager.
  You do this by using the Advanced installation procedure that will force windows to select the driver from the driver's record, that you have downloaded from the Intel page.

• Satellite P300D-14F - strange problem with an HDMI cable

  I have some problems with the HDMI on my P300D-14th:
  until yesterday everything worked perfectly, but now I can't watch video on my TV (Toshiba REGZA).
  TV's with black screen (when the laptop is off - screen is blue).
  Problem is not in the cable (I have 2, second I ve bought today).

  And HDMI works (but also not good) when I open the BIOS on my laptop:
  http://S007.Radikal.ru/i302/1201/F8/8a363ffeeb16.jpg http://s15.radikal.ru/i189/1201/26/a42111548da0.jpg
  (TV foto, on all the laptop works perfectly)

  on TV, I have 2 HDMI, but neither first second step do not work...

  My OS is Windows 7, but I also have tryied on Ubuntu Live CD.

  I think the problem is HDMI on laptop, but I don't understand why it works in the BIOS...

  Hello

  This means that you can see the page of the BIOS on the TV?
  Have you tested the FN + F5 key combination once Windows has started?

• Satellite L670 - strange problems with HDMI connection

  Hello

  I experience problems when you use the hdmi connection:

  My computer: Satellite L670

  Scope: Watch movies on the LCD external (sony bravia) via hdmi

  Computer param: Clone computer - screen plugged - features full power - the screen of the laptop has been set in order to let the computer works normally when closed.

  When you play a movie with the laptop open screen, no problems. I have twice the movie, one on the computer screen and the clone on my external LCD. Perfect.
  But if I close the laptop screen (which would normally have no effect), lagging behind the film on the external display. He stops each 5 seconds for a few seconds and leaves, making it unreadable.

  Did someone had such a problem? Any suggestions?

  Your help will be appreciated.

  If you need to know everything, just ask; (o)

  Thank you.

  When this happens you noticed more often and HARD disk activity flashing LED of the HARD disk on your laptop?

• Intel Pro 2200BG has problems with stay connected

  I recently bought our laptop, and we have an Intel Pro Wireless installed BG2200.

  When I connect to broadband with the network cable I have no problem, but as soon as I swop on the wireless, I have big problems. The wireless to connect and disconnect a few seconds and repeats itself until I have disable the wireless settings. I tried to reload the software, without success, unless I'm loading the wrong software. I tried to load the IP, while it is fixed, which did not help.

  Someone at - it suggestions for helping me get my wireless problems solved.

  Thank you

  Hello

  Who is your internet service provider? If it is BT, or even if this is not the case, you could try this:

  http://support.Microsoft.com/kb/933872/en-us

  See you soon

• Satellite Pro L500-12F - problem with CD/DVD player and screen

  Hello...

  I have a few questions on my laptop...

  1. is it normal that the DVD rom on some DVD/CD it is very noisy and vibrates a lot, spesialy on older CD

  2. the lid of my laptop when I close its kinda not in harmony with the rest of the pc it is not fully aligned, but it's a little difficult to see wait when you look for it... but its good on and what is not lost or anything just not setting for the "body" of the laptop

  3. the cover still once, under the screen where the cover is mounted on the 'body' off the laptop so... It is not glued to the screen as the rest of the rolled edges it is right next to him that you can drag into it, so you can see the wires enter the screen etc.
  is this normal?

  -Thank you

  Hey Pedersen37,

  (1) maybe your old CD's doesn't work correctly. What happens if you try the same disks in another computer?

  Regarding your display/cover problem if you mean that you can see the cables that they go into the screen I can see it on my laptop. Normally, all the cables are invisible and under the plastic.
  He s strange to say something on the subject but maybe a lid plastic isn't installed correctly or a screw is missing

  If you think that something isn't normal, you should contact your authorized service provider. They can check the laptop.

• Satellite A210-14 - strange problem with new WLAN adapter Intel 4965agn mm1

  The initially installed atheros wireless network adapter is just b/g and too slow for my network/needs

  So I bought a one n-project: mm1 4965agn (intel) (he got a toshiba p/n and s/n too)

  I replaced the atheros one and plugged the Intel - booted and installed the drivers - restart-> adaper works very well-> reboot - nb stops at the toshiba BIOS screen without loading all the windows. I can't even to the BIOS-> removed Intel wlan adapt nb boots and as usual.

  Please let me know what I need to do to make things work

  Hi chubbyhamster,

  To me, it sounds like this map isn't WLAN compatible with your laptop. I guess that all wireless network adapters are compatible with all laptops (assignment of pins e. g.).

  As far as I know use fast N project you need 3 antennas. I think Satellite A210-14 has just two antennas because only WIFI b/g card built in. This means that you can upgrade your laptop to the project speed N t.

  Alternative you can use the LAN card or a USB key which takes in charge the project N, but in my view, WIFI b/g standard should be fast enough

• Re: Satellite Pro A40 - has not found any connection WLAN in range

  I have problem with my laptop. I have Toshiba Satellite Pro A40 [model N°-PSA45E-001YMFS] with Microsoft Windows XP SP3 and I wanted to add a WiFi atheros (atheros 5005g) ar58mb5 map and an having problem.
  I have instaled lastes drivers for it. I see in drevice Manager and seems to work fine but when I try to look for other wirless shows that this text "found no wireless networks in range.

  First question: this model of laptop is possible to have this part?
  Second: Will it work?

  Sorry for my possible mistakes with this post but my English isn't correctly. Plese give me a quick answer for her.

  null

  Hey,.

  As far as I know a few Satellite Pro A40 were available with WLAN connectivity and other models not so theoretically WLAN works with Satellite Pro A40.

  You have installed the card WLAN, you connect the two antenna WLAN (black and white) cables to the WLAN card?
  Or you didn t these antenna cables?

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Satellite Pro C850 - 1 M - update to Win 8.1 fails - error 0xC1900101 - 0 x 30018

  Hi all

  bought a new satellite Pro C850-1MX (PSCBZE 00M009GR) in December 2013. System works virtually unchanged to the State of delivery. Yet installed OpenOffice and Firefox, AdobeReader in most actual versions. And a updated driver for AMD GPUS to the latest version. No other changes made.

  Now I tried to upgrade to 8.1 via Windows-App-Store Windows. Download was made, run, reboot, installation of changes, preparation of devices--> restart, rollback to 8.0 with 0xC1900101 - 0 x 30018 error code upgrade.

  Searched internet solutions: Toshiba ISC
  -updated all the components Toshiba via TOSHIBA Service Station--> fact
  -(Lien: [http://www.toshiba.de/innovation/generic/windows8_1-upgrade-stepbystep/]): uninstall some components: esp. LAN/WLAN-driver.

  Hmmm... If I do I can't access to Windows App-Store to re-run the upgrade because I have no connection to the network. Stupid...

  -Why I'm updating a nearly unchanged system due to some driver-inflicted where I has not changed anything of the delivery status of can´t?

  Please indicate any tip/solution. Thank you!
  Mark

  > Now tried to upgrade to 8.1 via Windows-App-Store Windows. Download was made, run, reboot, installation of changes, preparation of devices--> restart, rollback to 8.0 with 0xC1900101 - 0 x 30018 error code upgrade.

  This error message appears because of some incompatible drivers and tools that are already pre-installed on Windows 8.

  This problem has been reported several times here in the forum and has been resolved as indicated by user harrie_1 on January 12, 2014
  Look in this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=74631

  Check that drivers must be uninstalled in Appendix a.
  [How update of Windows 8 for Windows 8.1 | http://support.toshiba.com/sscontent?contentId=4003162]

  + What is important to remove the internet connection. +
  + Only use to download 8.1 and then disconnect (also the Lan cable) +.
  + After Win start 8.1 for the first time do not connect to the internet. +

  + On another pc download first for 8.1 audio, realtek wlan and bluetooth drivers and driver display. +
  + Install and reboot after that when system is stable, you can connect to the internet and download the updates of windows. +

  PS: this thread should be closed to avoid the misunderstandings and because the other thread already exists

• Satellite Pro C850 keyboard does not work properly and opens several programs

  My satellite pro C850 1HE keyboard intermittently stops working correctly, and begins to open programs, for example, by pressing F will open the file search, C open computer this kind of thing

  is there a permanent solution to this problem?

  This is not something to do with installed programs is not something to do with the browser settings.
  restarting the computer works in a short time, but that is a long time, it's really annoying because I use this for work and study!

  > is there a permanent solution to this problem?

  The question is what causes this problem? Is it related hardware or software related issue?

  Why n t connect a USB keyboard just to check if the same would happen?

  In case the USB keyboard would work fine, I guess that the internal keyboard failures and the solution would be a simple replacement of the defective part.