Satellite Pro C870-1E2 - internet connection problem Proxy Server not responding

My old Toshiba computer connects to the internet via a numbered port,
yet my new Toshiba Satellite Pro C870 1E2 connects to the internet through a proxy server.

Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

When I tried the old computer connected instantly he had to wait a long period of time before that the "proxy" got it's act together.

Advice please?

> Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

And why you think you ve you have a problem with the Satellite laptop? I understand the original message: the Satellite acts as client.
In my eyes there is a problem with the proxy server, and this should be checked first.
Its almost impossible to tell which could affect the proxy, but as a first step, a reboot would be desirable.

Tags: Toshiba

Similar Questions

  • Satellite Pro C665 and internet connection problems

    Hi, will try and give as much information as I can, so sorry for the long post.

    I bought this new laptop in August is so very old, I connect to the internet with modem USB 3 G telstra and a cycle of 3 weeks he began to abandon the connection within 30 seconds approximately.
    The blue LED on the identification of the USB modem still flash, it has a connection, but I would get the yellow explanation mark on the icon of internet connection in the task bar.

    Now, the only way to recover the connection must close the connection of Telstra, unplug it, plug it back in and reconnect, a few times I have to reboot and will have to go through this routine 5 - 6 times and sometimes up to 10 attempts before I get a stable connection.

    So first I thought it might be the USB modem, so I got a replacement of telstra, but made no difference, then I had a replacement sim card and still no luck.

    Then I did a new install of Windows 7 and installed all the current updates, still no go.

    I then bought a wireless router to eliminate the USB connection and still have the same question.

    Sometimes it can be very frustrating trying to get a solid connection, but once it gets a good connection, it will stay connected for hours without any problem

    I'm not an expert with computers, but can usually find a solution to problems of software, I have, but that left me speechless and I think I've covered most of the region to address this.

    Thanks for your time.

    Unfortunately I can't say anything on Telstra 3 G USB modem. Toshiba doesn't support third party hardware, software and does not offer any kind of support.

    I put t know where you got this USB modem but I m wondering you didn't visit their store and test in functionality it bring your laptop with you. The people who work there could make inspection on site.

    I also put t know why you have this problem at home. Your router is not known to us, but is there a difference when using WLAN secure or unlocked and without password?

  • Internet connection problems; PC says not connected to the internet

    Despite the fact that I am connected to the internet through a broadband network, that the pc still shows that I am not connected to any network - why this?

    If you could be more descriptive, it would be useful.  I'll take a good guess on what you ask on...

    Most of the time, according to me, you can describe what your computer is able to find a wireless router but the router doesn't send an IP (its normal function).  He would say connected, but no internet connection.

    This is usually:

    1. your Internet service provider is down or your connection to it is broken.  If this is the case there is nothing you can do about it.  Call your service provider.

    2 your computer network security key does not match the one in the router.

    Next:

    1 reset the modem & router.  Follow these instructions precisely: http://canadiantech.info/?page_id=136

    2. If that does not resolve the problem, you must remove this network from your list of networks to manage Windows 7.  Then try to connect again using the network key, you know.

    3. If this does not work, you will need to do a factory reset on the router and re - install the router according to the router set up instructions.

    4. If after all the above does not correct the problem, you must replace your router.

  • After the change of username & password for wireless internet connection WiFi printer is not responding.

    Original title:

    Canon Pixma MG5200 (printer WiFi)

    I changed the username & password for my wireless connection internet and since then my WiFi printer does not respond after that I did mentioned the new configuration. I tried to reset the printer with its installation CD, but at the end of installation, I get a message that the printer is not found on the network. I also read the help manual, but I couldn't solve the problem... I really appreciate a clear explanation for having my printer answer & working again.

    Hello
     
     
    1. what exactly happens when you try to print? You receive an error message?
    2. other wireless devices work properly?
    3. what operating system is installed on the computer?
     
     
    Check if the printer is on and properly connected tour.
    Method 1:
    You can run the fixit from the following link and check if it works:
    Diagnose and automatically fix problems printing and printer
    http://support.Microsoft.com/mats/printing_problems/
     
    Method 2:
    Try the steps in the following article and check:
    Why can I not print?
    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
     
    You can also consult the following link:
    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
     
    I hope this helps!
  • Satellite Pro m USB devices connection problems

    Hello visitors and insiders.

    can someone help me, please? - or are the causes of the problems of programmed BIOS is not perfect?

    I put on the USB Ports (I tried all 3 Ports) after correct installation of the most recent drivers for devices and the BIOS and chipset.
    I tried MAGIX encoder by USB and PINNACLE for USB encoder - both signal-request-problems and the two could not shut down the system after connecting with USB and close with her current for USB device.

    I tried this on different WinXP installiations (multiboot) - but on all systems even.

    The same reaction has been, as I have connected a special CUSHION cooler for laptop with additional USB Ports.
    The CUSHION cooled - but the USB Ports do not work for all devices (devices I am familiar with the)
    Ports of origin of the laptop, has failed to TRIM, too). (worked directly devices: mouse, webcam, keyboard, drive hard usb)

    What should do? .. If anyone know Somethin ' help... I will be very happy.

    Thank you very much!!! (Sorry for my English is not perfect)

    Ben

    Is what model of laptop exactly?

    Have you installed Windows yourself? Or it was preinstalled?

    Looks like it's a software problem, bad drivers USB can at fault.

    You are able to back up your data and run recovery?

  • OfficeJet Pro 8610: ePrint Internet connection problem on Officejet Pro 8610

    I work in a shared office.  I just got my printer & want to set up ePrint.  I got an error message saying that both the computer and the printer must use the same internet network.  But my computer is using my personal Internet & I put the printer to use the network wifi internet.

    I would like to take advantage of the options, which allows, ePrint offer?  Both the printer & computer do I have to use the same internet network or can be on different?

    Allowing ePrint can be performed on the print directly. To change the settings on ePrint (access authorization, custom, etc. e-mail addresses), you can use any computer with web access, on hpconnected.com. ePrint works exactly like mail, then the computer can be on any network.

    The computer needs to be on the same network only when you want to print to it as a network printer.

  • Satellite Pro U300: the cursor of the touchpad does not respond

    Cursor does not respond

    Hi dude

    Have you checked if the touchpad is probably disabled?
    You can enable and disable the touch pad by pressing FN + F9.

    In addition, it would be interesting to know if you can use the USB mouse properly.
    If more information is needed

  • Satellite Pro C870 can run on the 5 GHz band?

    My laptop model Toshiba Satellite Pro C870 1E2 can run on the band 5 GHz with Windows 7 Pro 64 bit. Tried to ask this question to Toshiba, but it seems to be a technical problem it so impossible to transmit my question for them.

    Hello

    The frequency of Wlan depending on the WLan card.
    I think that the laptop was equipped with WLan RTL8723AE Realtek card that supports the 802.11 standard B / G / N standard

    5 GHz is only available using 802.11 A or N

    802.11 N standard works on 2.4 Ghz and 5 GHz but 5 GHz is available ONLY if the WLan card would support additional one 802.11 standard; That is to say 802.11 A / N.

    But Realtek RTL8723AE doesn t support 802.11 has and therefore the 5 GHz are not possible for this WLan module.

    Here's a similar thread on the same topic:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64003

  • Satellite Pro C870 - Internet connection fails after a fashion 'sleep'

    SATELLITE PRO C870-19N. Internet through an ethernet cable. Windows 8.1

    Hello

    My problem:
    I turn on the computer. It recognizes the connection internet (Ethernet cable). I work without any problem... and I left (a few minutes)... I come back. Black screen, computer sleeps. I wake it up - I have to enter my password - and he says there is no internet connection... I have to stop it and restart it.

    Can you help me?

    Thank you.

    This problem occurs using only the LAN connection or have you noticed the same situation using Wireless LAN?

    In case this happens only by using the LAN connection, I recommend you to check if you can update the LAN driver.

    You can also right click on the network icon (in the taskbar) and could choose to diagnose and repair.

  • Satellite Pro C870 - 19(d): Windows 10 - BT seems to have problems

    Hello

    our laptop Satellite Pro C870 - 19(d) works very well under Windows 8.1. Now the tool Advisor Windows 10 registration and upgrade has been installed automatically by Windows Update and it says that the two internal Bluetooth components of this laptop is not compatible with Windows 10.
    Currently, no driver updates Bluetooth is available via Windows update driver online or via Toshiba Service Station.

    Is there a update driver in the near future that ensures compatibility with Windows 10?

    Best regards, Hans-Georg

    Hi guys, the Windows 10 is not officially released by MS, and currently Windows 10 drivers are not available for all Toshiba laptops.
    I think you need to wait that Toshiba would start the support to win 10. I guess that this will happen after the official release of win 10.

  • Black screen on Satellite Pro C870-1CJ

    Good night

    I have a portable Satellite PRO 1CJ C870. A few days ago I got a blue screen showing display problems and since then, the laptop screen is black and there is no picture shown in it. I am entered mode secure and tried to connect it to a VGA monitor with success.
    As I guess it was a problem with the graphics card then in the blue screen message, he made atikmgpag.sys that I tried to install the latest version of the graphics driver t but no news on the laptop screen.
    I also tried Toshiba Tempro, which has not had the success also. I have tried several things without result.

    Can anyone help me to solve the problem? I'm a bit desperate.

    Thank you

    Gabriel

    As far as I know your laptop Satellite Pro C870-1CJ was equipped with two graphics cards:

    1 - internal Intel Graphics HD 4000, which is part of the Intel CPU
    2 external ATI Radeon HD M 7610

    The error that contains information about the atikmgpag.sys file seems to be related to the ATI graphics card driver.

    I'm not sure, but it might be possible that the graphics chip from ATI external began to malfunction.

    Anyway, if possible, try to retrieve the laptop as mentioned by Liam
    If this is not possible, the material may be affected and it could be costly to repair.

  • Satellite Pro A300 - no Internet to wide band wireless

    Hello

    I hope someone can help me. I have a TOSHIBA Satellite Pro A300 and the operating system Windows XP Professional 2002 Service Pack 3.

    I've had obviously my machine for a few years now and have never had any problems with it even though I used to always use an ethernet connection. Lately, but I moved to wireless broadband.

    When I try to install or update some programs or even just access the internet through them they claim that there is no internet connection. Although Internet Explorer and Windows updates are all still works fine. These programs include Itunes Store, Mozilla Firefox, Google Chrome, Log-me-in Vital Source Bookshelf, Adobe/Acrobat Updaters. As you can imagine it is a proplem to access updates and creates a problem with my studies that I use for my class.

    I tried other suggestions of forums such as the update of drivers, install all latest updaters for windows. However, I'm still stuck with the same exact problem.

    Can someone help me please?

    Hello

    I have to say WLAN connection is friendly and never had any problems. You can go anywhere online without cable home, which really nice and easy.

    But it strange that some features of Internet connection and other programs not

    If you connect the cable all programs have access to the Internet or you have the same problem with the cable connection?

    Maybe it's something wrong with the settings for the s WLAN card Check if you have set the correct TCP/IP parameters for WLAN card. Probably, you need a static IP address but who according to your router.

  • Satellite Pro C870 - Win8.1 update - error 0xC1900101 - 0 x 30018

    Hello there,

    for seven days, I try to update my system to WIN8.1. on the first try, I get the 0xc1900101 - 0 x 30018 errorcod.
    I already did a reinstall of WIN8 and uninstalled everything except the networkdriver. Allways get the same message. The installation seems to work fine until deviceconfiguration 64%. Then it restarts and redefines WIN8.
    My system is Satellite Pro C870 1EJ
    Need some help, or better a solution.

    THX

    verzweiflix

    This problem has been reported several times here in the forum and has been resolved as indicated by user harrie_1 on January 12, 2014

    Search in this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74631

    Next to the workaround solution posted by harrie_1, you can try to solve the problem of updating through the stages which are:

    Uninstalling AV and firewall disabling
    Go Wi - Fi usage for a thread using a network cable
    Remove AVG
    SFC scan
    Disable Wi - Fi
    Update the BIOS
    Remove additional USB devices

    Welcome them

  • Re: Satellite Pro C870 - No Wireless, code 43 error

    Have two new Satellite Pro C870 where the wireless has been disabled at the start of the second. NETWORK card wireless in the Device Manager has an exclamation point and showed "Windows has stopped this device because it has reported problems. (Code 43) »

    After you perform a restore of the system, as indicated by the support, the question was always there.

    Just before sending the two laptops off the coast for repairs I undid a parameter called "quick start" in the bios (otherwise defined by using a utility from Toshiba).

    Issue seems to have erased after that.

    Is everything OK?
    If this isn't the case, I recommend you to reinstall the OS using HARD drive recovery facility. After that this laptop will again have factory settings and everything should be OK again.

  • Satellite Pro C870 - 1FL PSCBBE - not more than Bluetooth after upgrade to SSD

    I have a Toshiba Satellite Pro PSCBBE C870-1FL with 64-bit Windows 8.

    For a Crucial m500, I changed the 240 GB hard drive.
    With this disk, Windows cannot find the bluetooth adapter:

    WIN8/64 on original HD - Bluetooth OK
    Win7pro/64 clean installation with the original site HD - OK Bluetooth drivers

    WIN8/64 restored rescue DVD - SSD - Bluetooth adapter not found
    Win7pro/64 own facility managers website on the SSD - Bluetooth adapter not found

    Please can you help me make Bluetooth works with the SSD

    Concerning
    Harry

    Hello

    From my point of view it s not matter if you use the SSD or HARD disk drive.
    This should not affect the functionality of BT.

    I think that its driver / software problem and, therefore, you should check this first
    Satellite Pro C870-1FL was equipped with a Realtek WLan / BT combo card.

    The driver BT / install the software according to the system you are using.
    So in the case of Windows 7, you need to install the package of added Value Toshiba, Realtek WLan driver, packet filter for the driver Realtek BT and BT Toshiba stack.

    In the case of win 8 you must install the driver of Toshiba system and the Realtek Bluetooth driver Package filter

    Please check the two options

Maybe you are looking for