Satellite Pro L series starts with the error message

Similar Questions

• Satellite A200-175 - recovery ends with the error message

  I bought my Satellite A200 2 years and it was the first time I tried using the recovery discs. These discs are properly kept in their original boxes before you use them (no scratches). My computer has virus and I tried to reinstall the system.

  When I started using the recovery disk, I put disc 1 into the optical drive and wait. Soon, he prompted a 'Ghost' screen and began to copy files. Everything seemed OK, but after a while, I get the following message:

  "wimcopyfileex failed...". Error image restoration... ImageX couldn't shall apply from fist F:/05366xsp.swm index 2 odd in c:

  Can anyone help? Thank you very much

  Hello

  I have the Satellite A200 and I got a DVD only. There is no ghost window. Ghost was used until the year 2005. Since then, Toshiba uses new procedure of collection called Rico or Reco. I remember more.

  Can you please send us the number on this CD/DVD recovery?

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  

  Hello

  Greetings!

  Close to Lightroom.
  Navigate to the location where the catalog is present (default value is within the pictures folder lightroom file)

  And delete the file previews.lrdata.

  Note: do not delete the catalog with the extension .lrcat file.

  Concerning

  Jitendra

• vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Hello

  Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

  vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Thank you

  John

  Hi John,.

  This is due to host on the vCenter server entries. Please try the procedure below

  Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

  C:\Windows\System32\drivers\etc\hosts

  # 127.0.0.1 localhost

  Note: If a line does not exist in the hosts file, add it at the end of the text.

  #) to remove the comment from the line of IPv4.

  1. 127.0.0.1 localhost
     ·  Save and close the file.
  • localhost127.0.0.1.
    • GoTo services.msc and start VMware Virtual Center Services.

  Thank you

  Venance

• My attempt to connect to hotmail fails with the error message "this domain Services have been abandoned.

  Hello

  My attempt to connect to hotmail account fails with the error message "this domain Services have been abandoned. The problem persists in all web browsers. I'm unable to open a session (* address email is removed from the privacy *) which I've used for more than ten years, and I can't afford to lose. The problem started today and I don't know that I ever change any setting in my PC.

  Can someone help me with the first note.
  Thank you.
  Raj Kishore
  E-mail address is removed from the privacy *.
  E-mail address is removed from the privacy *.

  Hi Rajkis,

  When you use Windows Live Hotmail and the problem you posted is with Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  Windows Live Solution Center Hotmail Portal

  http://windowslivehelp.com/product.aspx?ProductID=1

  I hope this helps.

• I'm so fed up with the error message that adobe flash broke down.

  I'm so fed up with the error message that adobe flash plugin has crashed. You got two years, in order to solve this problem, and all your proposed solutions do not work. I see no alternative but to return to Internet Explorer. It's so frustrating when I check my emails and click on a link to get the same message over and over again. Why did this problem occurs only with Firefox? It is not the case with Internet Explorer and it is not the case with Google Chrome. Otherwise, Mozilla Firefox is great.

  This from Halofromsue copied here:

  Well as I said in my last post, yesterday I disabled Shockwave in Plugins. However, as you know, you need shockwave and flash for most things... so I went back and set it to say "ASK to ACTIVATE" so when a web page loads and he needs, he will ask, and then I will either say 'Yes' or ' ' and that seems to work. So far, after three hours, it has collapsed and shockwave/flash all work fine when she needs.

  Me: it works!

• everytime I turn on my laptop, now I get bombarded with the error message that says...

  Hi, whenever I turn on my laptop, I get now bombarded with the error message that says...  The application or DLL C:\PROGRA~1\Google\GOOGLE~2\GOEC62~1.DLL is not a valid windows image. Please check this against your installation diskette. This message appears every time to load something like yahh or msn etc?  Any help on what caused cela or how to solve this problem would be highly appreciated.  Thank you

  Try to clean the temporary Internet files...

• Unable to play the Facebook saga Pyramid Solitaire properly with the error message: uncaughterrorEvent "bubbles = true cancelable = true even + phase = 2"

  Original title: Facebook game of pyramid solitair saga, error mesg

  I receive a message [uncaughterrorEvent "bubbles = true cancelable = true even + phase = 2].  I hit the SPACEBAR to enter a play or to get a total. Can anyone help?

  Hi tipsy,

   

   

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not play the lonely saga Facebook game pyramid correctly with the error message: uncaughterrorEvent "bubbles = true cancelable = true even + phase = 2. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Please follow the steps in the link if you are using Internet Explorer and check with the question below:

   

  The problems of games online using Internet Explorer:

  http://support.Microsoft.com/kb/2528246

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

  If the problem persists, you can contact Facebook support to improve assistance on the issue of the links below:

  Facebook Help Center:

  http://www.Facebook.com/help.php

  Contact Facebook and Facebook support:

  http://www.Facebook.com/help/220217228006012/

   

   

  Facebook games help:

  http://www.Facebook.com/pages/games-help/165498566811429

   

   

  I hope the above information helps you and your response is very important for us to ensure a proper resolution.

• BlackBerry Smartphones BB torch: call the cuts after every 1 hour with the error message: forbidden outgoing calls (8 CC)... .plz help

  The flame of my BB, cutting its call after every 1 hour with the error message: forbidden outgoing calls (8 CC). except the active calls, isn't she the netwrk...?

  Hey pemba.

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the question.

  I would first check to see if you are using the latest version of the software of your network service provider.  Go to www.blackberry.com/update or open BlackBerry Desktop Software.  If the software is up to date, I would check with your provider network for more investigations.

  Let me know if you have any questions.

  See you soon.

• Hello I have PC and pay monthly. We are a small company. Question 1: For two years I have a full subscription to Adobe all programs. But the other day I would open an another user InDesign documents and could not open this with the error message: the

  Hello

  I have PC and pay monthly. We are a small company.

  Question 1: For two years I have a full subscription to Adobe all programs. But the other day I would open an another user InDesign documents and could not open this with the error message: "the document is done a new version than my version of InDesign. How should I do to upgrade my version to a version more recent?

  Question 2: I already have a license to use the software on two computers. Am I not allowed to use the same version I've taken down on adobe.com til two computers or terms here.

  Sincerely

  Stefan Svensson

  Hello

  Please see update requests in your desktop CC application.

  CC Adobe license can be activated on 2 machines using the same Adobe ID, but only one at a time.

  Reference: licenses and terms of use | Adobe

  Kind regards

  Sheena

• When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  You can try to download the 64-bit version.  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

• Satellite Pro L300 - Dual boot with the AHCI mode

  Type of product > Notebook
  Family > Satellite Pro
  Product series > Satellite Pro L series
  Model > Satellite Pro L300 24L
  Model short-term > PSLB9E

  Hello.

  XP and Seven is installed in dual-boot on my laptop and I use EasyBCD to choose which system I want to start.

  To start XP, I need to enable "Compatibility" (Controller SATA in BIOS mode) and seven is "AHCI" must be activated.

  Is there a way for my two OS was started without making changes in the bios?
  Y at - it an update to correct this problem (or alternative)?

  Thank you in advance.
  Marc

  Yes you can do it but I'm afraid, you must reinstall Windows XP Home edition m.
  Why? Because before beginning to install Windows XP Home edition, you must change it to AHCI mode, launch the installation of Windows XP Home edition and before you start you need to load the SATA driver (via F6 I think).

  Long time ago, we have discussed a lot about this on this forum then use the advanced search anc check options other postings on this subject.

  By the way: check http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm

• WLan AutoConfig was able to start with the error 193:0xc1

  Former title: error 193:0xc1

  My wireless does not connect because it says that the WLan service failed to start.

  I went to the computer > manage > services > WLan AutoConfig. It has been set to automatic but it was empty when he should have said start. When I tried to start it I got the message service was able to start and the error in the title.

  I opened the dependencies in order to check if that was the problem and each of them have begun. So, it seems that the error is always in WLan AutoConfig.

  I tried the system restore (this problem just started today) to an earlier point, last week. It sticks on the system restore is initializing an hour +. I tried several restore points, but it always gets stuck on initialization.

  I looked at similar questions and I did everything recommended in people, but it seems that the answers stop without the original poster saying that they got it to work or not.

  Hello
   
  
  Step 1.
  Follow the steps below and check if the problem is resolved:
  a. Click Start, and then click computer.
  b. go on the system disk, where the operating system is installed (usually drive C :).
  c. find the program file.
  d. remove this file and restart the computer and check if you are able to start the service.
  Note: If you don't see the program file check if the file is hidden. Clickhere to find out how to show hidden files.
   
   
  Step 2.
  If the steps above to solve the problem I highly recommend to run a Virus Scan online.
   
  Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
   
  b. run the malware removal tool from Microsoft.
   
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
   
  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
   
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite L300D - recovery disk stops with an error message

  Hello

  I don't read a lot of the other post, but foung no response...

  My problem:
  I bought a L300D Vista 1Y there are no included recovery disks, so I made the recovery disc. Now, we wanted to reinstall Vista, so I tried the recovery disk, but after 15 minutes, it failed with an error message:

  After successfully in 3 partitions of partitioning and formatting them the ImageX tool starts to extract VISTA

  After about 57% C:eindows\winsxs\x86_microsoft-windows-ehome-ehcird_31...35.6.0.6000.16663_...\ehcir.ird [removeExtract ToFileByStruct WIMcopyFileEx failed]

  Retry...
  [error 1117]

  What happenes about 5 times with similar messages (but other numbers), til message
  The request could not be performed because of an i/o error

  ERROR: ImageX could not to VISTA Lawrence drive HARD C: 2 V: HDD

  Press a key...

  Aftre reading the threads, I ordered an official recovery (35 Euro!) since the Office of service Toshiba disc, but I got the same errors and messages...

  Any ideas what I should do now?

  Thank you!!

  PS I never had these problems with my other laptops...

  Hello

  My friend who s a long story.

  It's not easy to say what the reason is for this, but to me it sounds like that there is something wrong with the HARD drive. In your case I would format the HARD drive before launching the recovery disc. You can do this with a Microsoft disk to format the whole HARD drive. After that try the recovery disk again.

  If it doesn't work, you should check the HARD drive with a special HARD drive diagnostic tool like Drive Fitness Test. use Google to find it, it s freeware and takes only a few minutes.

  Welcome them