Satellite Pro L10: Failed installation shortcuts keyboard F1/3/4

Similar Questions

• Satellite Pro L10: Is it possible to get a copy of the original installation discs

  Hi I'm new to the forum.

  Is it possible to get a copy of the original installation for my laptop Toshiba Satellite Pro L10 diskettes?

  Concerning
  Anno2

  Hello

  Of course, it of possible to get the Toshiba Recovery CD!
  You can order it from the service provider authorized in your country!
  Simply call the guys and order! It shouldn't be very expensive!

• Satellite Pro L10 will not start the system

  Hello!

  I have a Toshiba Satellite Pro L10, which won't work for some reason any.

  The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

  It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

  There is also a 30 second countdown if I do nothing the portable samekh automatically.
  It is, none of these things work.

  Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

  He did about 50 times now and still nothing.
  I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

  Help, please!

  If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

  hope this makes sense and I gave you all you need to know.

  Thanks, B

  It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
  If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

  In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

• Can not get my Satellite Pro L10

  I have a satellite pro l10, I tried to put my recovery disk in and she said keeping key c down when I start my computer but it does, nt work, how do I get this drive to work does anyone have an idea, s Please

  Hi James,

  Press and hold the 'C' key is a specific shortcut of Toshiba to allow the laptop to boot directly from the CD. However, you can also select the CD-ROM as boot device in the BIOS, just press the F12 key when you see the Toshiba start screen for power over the process and you will be presented with a menu of the device selection. Tab just down to the CD-ROM and press to enter. The laptop computer should now boot from the CD.

  Kind regards

• How to use Recovery on satellite Pro L10 with DVD drive broken?

  Hello...

  I have a satellite Pro L10, which is virused. I need to recover Windows. Unfortunately, I can not, because the CD/DVD drive is borked.

  I tried everything until and including the purchase of a laptop adapter HD, but my desktop computer is not a Toshiba so he does not have the recovery disk.

  I've never had to use a "recovery disk" before, so I have no idea how it works - apparently there should be a folder on my hard drive recovery? can someone tell me where I could find it? (I'm quite familiar with the innards of my installation of Windows and have never noticed before). Also, is it possible that this native recovery file has been compromised by my virus?

  Default: can it be fixed using an installation of LAN, and if so, could someone point me to instructions? (My BIOS allows booting from LAN, but not USB, which is irritating).

  Any other suggestions would be welcome.

  Thank you.

  Hello

  First of all you will not be able to use the Toshiba Recovery disk if you cannot use the CD/DVD drive.
  Why? Because you need to boot from the CD of recovery if you want to install windows from the CD from Toshiba.

  You ask how to boot from LAN?
  Well friend; I doubt that you will be able to do.
  First of all that this could be possible only if you have a RIS server.
  The Remote Installation Services can be installed optionally on Microsoft Windows 2000 Server, Windows Server 2003 or Windows Server 2008.

  It's really complicated and not easy for someone who has never done.
  If you want you can google a little how to create REEFS but in my opinion it s advisable to buy and compatible CD/DVD drive because the STRANGE can also be used for other purposes

• Satellite Pro L10 - recovery does not work

  I am currently that use the recovery cd of the product on my satellite pro L10, however when I am with regard to the selection of recover whole hard disk (option 1) then continue and then the following message appears on a black screen:

  For a drive partition error checking - please try again!
  Press a key to continue...

  When you press a key, then I get another white screen like this:

  X:\ >

  X:\ >

  I have no idea what to do about it, or even if it is indeed a problem, any help or advice would be greatly appreciated, thanks

  Hello

  Please format the HARD drive again and remove all partitions on the HARD drive.
  Several months ago, my recovery CD did not work. But after formatting HDD, I was able to perform the installation of the Toshiba Recovery CD.

• Satellite Pro L10 - PCI on motherboard at boot error

  Hey,.

  I have a Toshiba Satellite Pro L10.
  This weekend my laptop works normally.
  But now for some reason when I boot I get this error message:

  Resource conflict - mother PCI card
  Bus: 02, device: 01, function: 00
  F1 F2 for Setup to resume

  I can still get into Windows (XP SP2) and the computer works normally, but the error message is a gene.
  I've also updated the BIOS to the latest version that I could find on the Toshiba site, but still get the error.
  I guess that it is a hardware problem, maybe something is broken/failing?

  Any help would be appreciated.

  Hello

  I m not 100% sure that this error could say, but I guess that the PCI device (perhaps a card) connected to the bus 2 causes this error message.

  Maybe this could be a PCMCIA controller that is responsible for the PCMCIA card.

  Did you check your device manager for errors that are indicated by yellow exclamation points?

  Please check if one of the devices listed in the Device Manager does not work properly.

  Good bye

• Satellite Pro L10: How to arrange a pick up service under warranty

  Look, I don't know where to put this, but I'm at the end of my home with it.

  I know what the problem with my laptop (a Satellite Pro L10) because I've had this is the fourth time it happened.
  I just need to organise a pick up/repair warranty.

  I went through all of the fields on the this site Web site and filled in all categories and all cela and whenever I click on the button 'Submit' final at the bottom of the page where you will see your address and details of the problem, it refreshes just the page (LESS my details).

  He submits? It is a failure to present a reason any?
  I spent half an hour - that there is NO category that I failed to fill.
  What the hell with this thing?

  I have only one month left on my laptop warranty. I just want to fix one last time before I get a new one. I experienced this three times before - I know that the forest both inside and outside and I just want to get it + more + with.

  Is it just a number somewhere that I can call to have someone pick up the thing?

  Hello

  On Toshiba's European support page, you can find some useful links.
  http://EU.computers.Toshiba-Europe.com-> support & download

  You will find the link to the service provider authorized in your country and a link to your state of repair.

  If you want to repair your laptop then contact ASP in your country and organize the repair service
  All the details, you should get to you ASP.

  Good bye

• Satellite Pro L10 - Unmountable Boot Volume

  My Satellite Pro L10 loops in the boot process. After the Windows XP splash screen, the following error messages appears:... Unmountable boot volume... Technical information: Stop: 0x000000ED...

  I know that is nothing exceptional and do a full restore would solve the problem. But I don't want to lose the data (which are of course not saved). I tried a Windows XP disk, but it does not start from the cd/dvd drive by pressing F12 or <0>and change the boot order...

  Can anyone help please?

  Hello

  Hmm, the volume not mountable startup error message appears especially if the HARD drive may not be recognized during initialization. Why? Well, maybe the HARD drive failures or the master boot record is defective!

  If you don t want to recover the laptop, you can try to boot from the XP CD (C press immediately after switching on the laptop) and to start the repair console.

  In the repair console, you can use the command chkdsk/p and after that, you could fix the disk main boot using the fixboot command or / and fixmbr.

  If this does not help, the new installation of the OS is that you as a last resort.

  PS: If you want to save the data you can try to remove the HARD drive and try to connect it via external USB HDD controller to another computer.

• Satellite Pro L10 and Windows 7 drivers

  Hi guys,.

  I'm looking for a set of drivers for the laptop model above. I recently installed Win7, but I have no drivers for the machine at all.
  XP drivers do not work.
  If someone managed to install the drivers for this machine? I'm mainly interested in getting my wireless card working.

  I look forward to your responses.

  Thanks in advance for your responces
  Panos

  Satellite Pro L10 is old enough for laptop and I do not think that you will find all the Win7 drivers.
  According to the Toshiba - http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm - your laptop isn't supported Win7 and find the drivers won't be so easy.

• Satellite Pro L10-103 - USB ports not working not

  Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

  Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

  Hey Buddy,

  As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

  After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

  In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

• Extension memory Satellite Pro L10

  Hello

  I have a satellite Pro L10, which has only 128 MB of RAM. I want to wear this but can't find any information about it in the manual.
  I would like to know,

  How much RAM, I put in the L10?
  What type of RAM the L10 take?
  It's like a stick or two?
  Where can I buy this type of RAM?

  concerning

  David U

  Hey there,

  It has no internal memory, 2 locations available, 128 or 256 MB at 1 location, PC2100 DDR - RAM 333 MHz, 1024MB max

  You can buy the RAM from all :) any store on the computer or online from Toshiba.

  See you soon

• Satellite Pro L10 Memory Upgrade

  Hello

  I have a Satellite Pro L10 Celeron M Processor 360 1.4 GHz / XP HE / 256 MB / 40 GB / 15TFT / DVD-CDRW / OneNote. I wanted to upgrade the RAM, and I noticed that in the manual it says:

  Before installing a new module memory 512 MB do not forget to remove already installed memory modules.

  Does that mean that I can not install a 512 MB module and more the 256 MB is already a total of 768 MB?

  Thanks for any advice,

  Luis

  Hi Luis,.

  The specifications of your laptop indicates that it can accept up to 1 024 MB of RAM. If you have 2 RAM slots, so you can use any combination of modules of RAM as long as you do not exceed the maximum quotes. Of course if you have only 1 RAM slt then you must remove the original 256 MB module before insert you new 512 MB a.

  HTH

• Satellite Pro L10 - what sound card I have?

  Can someone tell me please what sound card has the Satellite Pro L10?
  All I know is that it is an integrated, but need to find the drivers for it, as I don't have my original master computer disc with me here in College, but to do my sound!
  Thank you
  Rob

  [Edited by: admin on 22 January 06 08:58]

  Hello

  Your device has Conexant CX20468-31 AC97 Audio Sound Card.

  Good bye

• Satellite Pro L10: Enter key malunction

  Hello.

  On my Satellite Pro L10, the Enter key does not work. I tested it in the BIOS and it works but it does not work in Windows XP. If someone from the software fixes or advice I would be very grateful

  Hello

  It's a very strange question, but you should be more specific about this. How did you test the feature key of entry? Is there the same result if you use Notepad or the same conversation programs Office applications? Your device's pre-installed with recovery media?

  As much as I know it isn't common Windows problem and it is unclear to me that there is a patch for this problem.