Satellite Pro L10 multimedia keys
Hello
I have problem with media player and multimedia keys.
When I listen to music (Media Player is minimized in my task bar) and I want to go to the next/previous track using the multimedia keys it always causes restoration of the window of the media player. I tried to reinstall the hotkey utility, but it does not change the behavior of the multimedia keys. I don't know how to change that because it irritates me that I have to minimize Windows Media Player each time when I change the song.
Thanks in advance.
Hi viper
I have Satellite 1900 and on my machine there are buttons to control the media player on the front of the laptop. I checked on my unit and this doesn't happen. Sorry, but I can't explain why this happen to you, but try to check all the settings on Windows media player.
Tags: Toshiba
Similar Questions
-
Satellite Pro L10: Enter key malunction
Hello.
On my Satellite Pro L10, the Enter key does not work. I tested it in the BIOS and it works but it does not work in Windows XP. If someone from the software fixes or advice I would be very grateful
Hello
It's a very strange question, but you should be more specific about this. How did you test the feature key of entry? Is there the same result if you use Notepad or the same conversation programs Office applications? Your device's pre-installed with recovery media?
As much as I know it isn't common Windows problem and it is unclear to me that there is a patch for this problem.
-
Can not get my Satellite Pro L10
I have a satellite pro l10, I tried to put my recovery disk in and she said keeping key c down when I start my computer but it does, nt work, how do I get this drive to work does anyone have an idea, s Please
Hi James,
Press and hold the 'C' key is a specific shortcut of Toshiba to allow the laptop to boot directly from the CD. However, you can also select the CD-ROM as boot device in the BIOS, just press the F12 key when you see the Toshiba start screen for power over the process and you will be presented with a menu of the device selection. Tab just down to the CD-ROM and press to enter. The laptop computer should now boot from the CD.
Kind regards
-
Satellite Pro L10 - need drivers XP
I recently did a new install of Windows XP Pro on my new HARD drive and got a list of other devices of the yellow question marks on them. They are;
-Controller Audio multimedia
-PCI Modem
-Video controller
-Video controller (VGA Compatible)Anyone know how I can get the drivers for these devices that I can not find an any of them on the Toshiba downloads/support page
I had a Satellite Pro L10.
I would appreciate the help as I do not have sound on my laptop.
Thanks in advance
Hello
The laptop Satellite Pro L10 is an OLD series.
Drivers and tools have been moved to the area of _ARCHIVE_ on the European driver Toshiba page.
Recommend to check this area for some XP drivers!Greeets
-
Satellite Pro L10 - recovery does not work
I am currently that use the recovery cd of the product on my satellite pro L10, however when I am with regard to the selection of recover whole hard disk (option 1) then continue and then the following message appears on a black screen:
For a drive partition error checking - please try again!
Press a key to continue...When you press a key, then I get another white screen like this:
X:\ >
X:\ >
I have no idea what to do about it, or even if it is indeed a problem, any help or advice would be greatly appreciated, thanks
Hello
Please format the HARD drive again and remove all partitions on the HARD drive.
Several months ago, my recovery CD did not work. But after formatting HDD, I was able to perform the installation of the Toshiba Recovery CD. -
Satellite Pro L10 boot password is not the same as in HWSetup
I recently got a laptop Toshiba Satellite Pro L10 by my employer. I entered a password and then confirm the password again in the configuration of HW from Toshiba in Control Panel of Windows XP. Then I clicked on the recommended option. No string or password was displayed in the box under Registered.
Since then, I was not able to boot up the laptop as the password that I entered Setup of HW is not recognized by the laptop started upward. I tried to type the password with caps lock, shift, and numlock on also. Are there any bugs or fault with defining a password for starting in the HW configuration utility? If there is a fault or a bug I would have preferred that the portable computer password is removed under the guarantee.
If I have to pay a Service partner.
Hi Geoff
On this path, it is not easy to tell what's going on exactly, but I assume that your employer has implemented BIOS password. You can enter the BIOS settings by using the F2 key at startup?
The BIOS password removal is not part of the guarantee and it must be paid. In my opinion, you must bring the laptop to your employer. He probably has Admin rights and it can set up passwords on the right track.
-
Satellite Pro L10 and Windows 7 drivers
Hi guys,.
I'm looking for a set of drivers for the laptop model above. I recently installed Win7, but I have no drivers for the machine at all.
XP drivers do not work.
If someone managed to install the drivers for this machine? I'm mainly interested in getting my wireless card working.I look forward to your responses.
Thanks in advance for your responces
PanosSatellite Pro L10 is old enough for laptop and I do not think that you will find all the Win7 drivers.
According to the Toshiba - http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm - your laptop isn't supported Win7 and find the drivers won't be so easy. -
Satellite Pro L10-103 - USB ports not working not
Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.
Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.
Hey Buddy,
As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?
After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.
In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.
-
Extension memory Satellite Pro L10
Hello
I have a satellite Pro L10, which has only 128 MB of RAM. I want to wear this but can't find any information about it in the manual.
I would like to know,How much RAM, I put in the L10?
What type of RAM the L10 take?
It's like a stick or two?
Where can I buy this type of RAM?concerning
David U
Hey there,
It has no internal memory, 2 locations available, 128 or 256 MB at 1 location, PC2100 DDR - RAM 333 MHz, 1024MB max
You can buy the RAM from all :) any store on the computer or online from Toshiba.
See you soon
-
Satellite Pro L10 Memory Upgrade
Hello
I have a Satellite Pro L10 Celeron M Processor 360 1.4 GHz / XP HE / 256 MB / 40 GB / 15TFT / DVD-CDRW / OneNote. I wanted to upgrade the RAM, and I noticed that in the manual it says:
Before installing a new module memory 512 MB do not forget to remove already installed memory modules.
Does that mean that I can not install a 512 MB module and more the 256 MB is already a total of 768 MB?
Thanks for any advice,
Luis
Hi Luis,.
The specifications of your laptop indicates that it can accept up to 1 024 MB of RAM. If you have 2 RAM slots, so you can use any combination of modules of RAM as long as you do not exceed the maximum quotes. Of course if you have only 1 RAM slt then you must remove the original 256 MB module before insert you new 512 MB a.
HTH
-
Satellite Pro L10 will not start the system
Hello!
I have a Toshiba Satellite Pro L10, which won't work for some reason any.
The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»
It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.
There is also a 30 second countdown if I do nothing the portable samekh automatically.
It is, none of these things work.Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.
He did about 50 times now and still nothing.
I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.Help, please!
If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.
hope this makes sense and I gave you all you need to know.
Thanks, B
It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.
-
Satellite Pro L10 - what sound card I have?
Can someone tell me please what sound card has the Satellite Pro L10?
All I know is that it is an integrated, but need to find the drivers for it, as I don't have my original master computer disc with me here in College, but to do my sound!
Thank you
Rob[Edited by: admin on 22 January 06 08:58]
Hello
Your device has Conexant CX20468-31 AC97 Audio Sound Card.
Good bye
-
IRQ conflict on satellite pro L10
I had problems using a capture card to PCMCIA data with a new satellite pro L10. I used the same card on other laptops with no problems. I think the problem is to do with the conflict on the IRQ channel, because both the card and the controller cardbus use the same channel. I tried to change the IRQ channel manually with the Device Manager, but it does not accept the change. Someone has suggestions how to change the IRQ channel or anything else that might help?
Hello
Unfortunately I'm not familiar with this, but please check this article http://kadaitcha.cx/irq_conflicts.html maybe you will find the solution to your problem.
Good luck!
-
Upgrade memory for Satellite Pro L10
Can I add 512 MB to 256 MB of memory already on my laptop? And also what is the name of the memory supported by Satellite Pro L10.
Thanx
FemiHi Fernando,
Your L10 has two available memory slots and will support up to 2 GB of RAM (2 X 1 GB modules).
Check the following URL for details of compatible modules for your laptop: -.
http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=11979&ft=m&St=3
HTH
-
Satellite Pro L10: where can I get a better graphics card
Hey
I have a Toshiba Satellite Pro L10 and I was wondering if and where can I get a better graphics card for it?
Thank you very much
Sorry Michael, but it has nothing to do because the graphics card can not be upgraded. Unfortunately the L10's small budget machine, and because of this, there is no better card inside.
Good bye
Maybe you are looking for
-
How to activate the BT on the Satellite C660-184?
Toshiba produces online information continues to tell me that the Bluetooth 3.0 is available for my computer, but annoyingly not to tell me how I can get it. It would be useful that this information came with a link that I can use to act on the infor
-
Dear community of readers and contributors. I started noticing this last August 15. Shorty after a bunch of updates system on my Vista Ultimate 32 bit, a few programs stopped working, with different error messages: "this application has failed to sta
-
Ideas to create Android as widgets on the home screen in Blackberry
Hi all I need to create and place a widget on the home screen. Please suggest/share ideas for the creation of Android as widgets on the home screen of Blackberry. Is this possible in Blackberry? Help, please. Thanks in advance.
-
The Cisco Telepresence SX80 solution help
Hello I really want to get your help in this scenario. We have 2 branches and planning to set (for the first site 3 SX80 of three meeting rooms) and (one SX80 for another branch). We have all communications between sites works well and phones are con
-
I used the SD card in my BlackBerry as a way to print some documents. Of course, internet cafes are full of virus of children all this porn downloaded. Then, I got a file autorun.inf with all its contents. My problem now is that I can not remove the