Satellite Pro L10 - USB port will not recognize devices

Hello

I got a L10 for 18 months. Under the guarantee, I got a replacement motherboard mounted. Everything has been ok so far. A USB port will not recognize devices, a port is ok, but randomly turns off a device attached to it and comes up with the message "USB device not recognized". The third port is ok all the time.

Any solutions or suggestions?

Post edited by: caddy

I guess there is not enough power on the USB ports and external devices may not work correctly. It is not easy to say why this happens, but there may be a problem of welding.

I recommend you contact the service again as soon as possible.

Tags: Toshiba

Similar Questions

  • Satellite Pro M70 - USB port does not recognize the device

    My Satellite Pro M70 has three USB slots, one on the left and two (vertically one above the other) at the back of the laptop.

    The top slot to USB in the back started giving problems. Sometimes, my computer can't see all that I plugged in there. But if I unplug anything - usually the printer or the mouse - the computer will usually see it then.

    What is the problem? Can do nothing about it?

    My operating system is XP. and my laptop is 4.33 year.

    Thank you.

    Hi Mannix,

    Have you already updated the chipset drivers?

    I read in the forum about these questions and normally helps to reinstall the chipset driver. :)

  • Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

    I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

    Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
    The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

    Plug the mouse on or off doesn't change anything. Only restart helps.

    Any ideas?

    It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

  • USB ports do not recognize devices

    Vista 32 bit OS was installed yesterday on a Toshiba laptop, Mdl: Satellite A135-S2246.  However, apparently, the drivers are no longer works as USB ports to recognize all of the devices that I plug into them. I get a message on the screen indicating the device plugged into the port USB is not recognized.  My question: as I have unsucessfully tried to find the drivers on the websites of Toshiba and Microsoft to resolve this issue, I appreciate any help anyone could offer.

    Vista 32 bit OS was installed yesterday on a Toshiba laptop, Mdl: Satellite A135-S2246.  However, apparently, the drivers are no longer works as USB ports to recognize all of the devices that I plug into them. I get a message on the screen indicating the device plugged into the port USB is not recognized.  My question: as I have unsucessfully tried to find the drivers on the websites of Toshiba and Microsoft to resolve this issue, I appreciate any help anyone could offer.

    Hey viper1948

    toshiba link below has the 32-bit drivers for vista for your model Satellite A135-S2246

    Click on the menu of operating system here for vista

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1596138&RPN=PSAD6U&modelFilter=A135-S2246&selCategory=2756709&selFamily=1073768663

    Walter, the time zone traveller

  • Satellite Pro 480cdt: USB ports do not work with Windows XP

    Hi friends.

    I install xp window in my laptop, now I can not install any material thanks to a port USB flash drive IE, wireless modem, camera

    Hello my frend

    You are joking or you are serious with the use of Windows XP Home edition on this point, unit for almost 10 years. ;)

    The set comes with Win 95. Try to use Win 98 and be happy if it works properly.

  • Satellite L650 - 12N USB Ports does not work

    My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
    It shows a yellow exclamation mark on my system.

    I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
    Under the key USB gives error code 43, I do not understand.

    The webcam and the wireless card no more.
    This boot problem after a storm in my area some time ago.

    Please can someone help.
    Thank you
    Sani

    Hello

    > This problem start after a storm in my area some time ago.

    Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

    I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

    But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

  • When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

    I am running Windows 7 Professional.  I have a piece of equipment that has only Windows XP drivers, I desperately need to work.  I read up on top of the virtual systems and XP mode.

    When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

    Thank you

    Andrew

    You must attach the USB device to Virtual PC XP Mode: http://support.microsoft.com/kb/824369

  • Satellite Pro C650 - USB ports now DEAD

    Over the past 48 hours have really struggled to get my USB ports work,
    Toshiba SATELLITE PRO C650 lappy running W7... At only 2 usb ports.

    A couple of days, I bought a new stick of memory... 16 GB SanDisk Cruzer Blade... He stuck in lappy and anything that happened outside my mouse attached wireless stopped working.
    Since then, the ports were completely dead. (stick now appears on anotherPC)
    That's what I did so far, after a search web solutions thro...

    Device Manager display ports everything is OK with no exclamations...
    When I insert any USB device... no sound confirmation of PC and Dev Mgr flinch...
    Tried to uninstall port/hubs and leaving W7 re-install them using... Still dead...
    Trying to remove battery and power sector during the centuries, then re start off the power... Still dead...

    I think that my last resort looking for a factory system by default re install... but one have a mountain of things astro which must be saved and cannot be done through many many discs.
    I really want to be sure ive tried everything before you do this.

    Could I have really damaged the MB. ??
    I now nowhere so fast if theres anyone out there has any suggestions please shout...

    > I think that my last resort looking for a factory system by default re install... but one have a mountain of things astro which must be saved and cannot be done through many many discs

    Even if it s really painful to get everything installed it again, I would recommend to recover the laptop using the Toshiba recovery disc or HARD drive recovery.

    > Could I have really damaged the MB. ??
    Well, it's hard to say before trying the recovery procedure.
    If the USB ports are not working after using the recovery disk (or HDD recovery), then of course: the mobo may be affected, therefore, in my view, the laptop must be set to the factory settings.

  • Satellite Pro L10: Recovery disk is not available

    HELO,
    I lost my disc of recovery for Toshiba Satellite Pro L10.
    Service in Poland say my only: Toshiba do not have this disc now.
    am I to do now?

    I need to reinstall my system.

    Model number PSL15E-00x009PL, serial number 55016672W

    Sorry, my English is bad.

    Krzysiek

    Hello

    It s very strange because this device is not very old, and as far as I know you can order all recover cd. Toshiba should always have a copy of the CD or DVD. I can t believe that it s is not possible.
    I would recommend asking EPA again or to call other ASP in Poland.

    The second possibility is to install the OS from the Microsoft CD-ROM, and then install the drivers set and tools of Toshiba.
    Such Toshiba things you will find on the page of the Toshiba driver.

  • Satellite Pro L10: sound card does not support Windows 7

    Hello

    I have a Satellite Pro L10 so I installed Windows 7 on my system, but my laptop cannot support Windows 7.
    I need sound card for Windows 7 update.

    The model of car audio is Conexant CX20468-31 AC97 Audio sound card.

    Please help me

    Hey Buddy

    What to say first of all that you will get not the official drivers for this laptop for Windows 7 or Vista.
    This laptop is oldie and I doubt that pilots will be released.

    By reading this forum threads I've noticed that most of the user using the driver on Win 7 OS Vista.
    Maybe you should google for Conexant AC97 Vista driver and should try a Vista on Windows 7 driver

    Good luck

  • Satellite Pro L10: USB on and goes off when I try to use the USB modem

    I have a mobile broadband usb t-mobile I want to use it on my Satellite Pro L10.
    When I attach to one of the usb ports then the laptop it is, but it loses then every 10-15 seconds (without interruption).

    I'm on XP Pro and usb Sockets work very well for a USB and a printer.
    I also tried to fix via a hub with external power usb and a pcmcia card with usb port, with exactly the same results.

    It works perfectly on my wifes laptop, it seems to be a conflict or a software problem.
    I flashed the bios and updated as well as seems relevant that I can.
    I continue updating the drivers etc, but in the meantime, I was wondering if anyone had any bright ideas?

    A healthy idea of mind is considered, it is starting to drive me up the wall! Mike

    Hey Buddy,

    T-mobile USB broadband have you? I mean if you could tell us what model you have maybe we can discuss it further. By the way: you said about your wife the USB - stick works machine. What operating system your computer laptop wife´s have?

    Would be interesting to know these facts; either by the way, I think it s more programs given that your material seems fine.

    Would appreciate feedback of your regarding your question.

    Greetings

  • Broken USB port does not recognize mouse or iPod.

    Original title: Broken USB port.

    My usb port broke on my laptop and wheb I try to use my second port is not recognize my mouse or my ipon. Can someone please help

    Hello Lainyb,

    Disconnect all USB ports as the first.

    1. click on start and type: devmgmt.msc in the start search box and press on enter. Click on continue if your computer requests.

    2. in Device Manager, double-click Bus USB controllers, right click on the controller host, click on uninstall and click Ok.

    3. Repeat step 2 to remove all items under 'USB Bus controllers'.

    Restart your PC and Windows will reinstall all USB ports.
     
     
     
    Greetings,

    DummyArbiter010 (NL)

  • Satellite M300 - left USB port does not work

    Hey,.

    I have a M300 Satellite, with a USB port on the right and the other on the left side. The one on the left has never worked with anything. Its never bothered me until now - I bought a portable HD and I need to connect it and a mouse at the same time...

    Interesting note though that when I put the laptop HD in the left USB port, the led lights, hard disk. The lappy himself made no sign he knows its there and I cannot access it, however...

    Any advice? Thank you very much!
    Dan

    Jin

    I guess, it is burning or something like that. You can buy a USB hub, it's a device that develops a single USB port into several so that there is more available ports to connect devices to a host system. It's not expensive and you connect many devices.

    Greers

  • Satellite Pro L10 boot password is not the same as in HWSetup

    I recently got a laptop Toshiba Satellite Pro L10 by my employer. I entered a password and then confirm the password again in the configuration of HW from Toshiba in Control Panel of Windows XP. Then I clicked on the recommended option. No string or password was displayed in the box under Registered.

    Since then, I was not able to boot up the laptop as the password that I entered Setup of HW is not recognized by the laptop started upward. I tried to type the password with caps lock, shift, and numlock on also. Are there any bugs or fault with defining a password for starting in the HW configuration utility? If there is a fault or a bug I would have preferred that the portable computer password is removed under the guarantee.

    If I have to pay a Service partner.

    Hi Geoff

    On this path, it is not easy to tell what's going on exactly, but I assume that your employer has implemented BIOS password. You can enter the BIOS settings by using the F2 key at startup?

    The BIOS password removal is not part of the guarantee and it must be paid. In my opinion, you must bring the laptop to your employer. He probably has Admin rights and it can set up passwords on the right track.

  • Satellite A10 s203: USB ports does not work

    Hello! All of a sudden my usb ports do not work on my satellite sa10-s203. Tried everything (even restarted the ashes of l-top nothing happened.) Enybody can help me? Kris...

    Hello

    If the USB ports are properly recognized in device then as Quad Manager said it could be an external problem. The USB port is 500mA power. If the external device requires more power to work in this case, it of necessary to use the external power supply.

    Good bye

Maybe you are looking for

  • iTunes Store password

    I sold an iPhone 4S that I used for a year. She asked my iTunes password when it tries to download or update their apps from the App Store, even though its accounts are signed and mine are disconnected. Please help me as soon as possible Thank you

  • CAN´t Time Machine restore photo library

    Hi all I upgraded to the El Capitan Yosemite. Before I made a backup of the files I wanted to with Time Machine, among them was the photo library. Everything went normally, when I tried to reset the library, 'walk back' in Time Machine, I selected ph

  • Atrix 2 sees no sd card at all

    Hello, I recently bought a motorola atrix 2 g 4, but he does not see my sd card. After upated, nothing. Can someone help me? Please...

  • How to remove or delete the line in a string indicator?

    I have a string indicator that receives data continuously. If the number of rows in the indicator becomes 100 then receives a new line after the very 1st line 100 line will be removed and so forth... in simple terms, I need to keep only the last/fina

  • Cannot change the default installation directory (missing ProgramFilesDir)

    I'm changing the default installation on my computer directory.  I looked at the number of threads here that cover the topic.  I go to regedit and follow this path: 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion' but I can't find the v