Satellite Pro L100 132: old RAM is not recognized by the system

Similar Questions

• Satellite Pro L100 132 broken badly - how to check?

  Well, here you have it: I dropped to the bottom of my laptop on the floor cement, some three weeks after buying, but it still works! (It's a Satellite Pro L100 132) With technicians, we ordered the necessary parts: plastic covers around the screen and the keyboard.

  No other problems are visible (I actually use the little guy at the present time, it behaves as usual), but you never know. So, my question: what are the problem areas that I need to check that everythings continues to work very well? And how can I archive them actually?

  I have heard things on the HARD drive, but not in details. In fact it was the fault of all stupid of the bag, it slipped right on my shoulder.

  Confound it!

  Hello

  It a shame to hear this.
  But maybe you re a lucky guy and nothing was serious damage.
  If the screen is working properly and that you are able to boot the operating system so I guess also the HARD drive was not damage and it works fine.

  I would recommend to open Notepad or remove something if you have no experience. I think that technicians should check your laptop. But if everything works fine, so I think that there is no need to s.
  Take care ;)

• Portégé R700 - 15L - 3 G is not recognized by the system

  Hello

  I already bought this laptop and I have problem with 3G driver to work.

  I downloaded the latest drivers from the website, but the device was not recognized by the system?

  Any ideas how to fix?

  Best way to fix this is to install the original OS, you got with this portable Portege. Original recovery image contains all the necessary drivers and tools and utilities.

  When you use the FN + F8 key combination what options are available?

• Satellite Pro L100 need more RAM for the graphics

  I have a Satellite Pro L100 with a 256 MB of the igp x200m no specialized version. Must automatically RAM my system RAM based on what system total RAM I have installed. 512 MB it took 64 MB, 1 GB, but 128 MB. I was wondering if someone could tell my how to beyond 1 GB RAM, say 1.5 or 2 GB?

  Thank you

  Hi Jessica

  According to the specifications of the laptop, the graphics card supports 32 to 256 MB video memory shared.
  So in my opinion, it should be able to use the 256 MB like max.
  In the properties of the ATI radeon graphics card, you will find the tab called Frame Buffer
  Here you can change the size of the memory to higher value UMA frame buffer

  The memory of 1.5 GB should be enough to choose the 256 MB graphics card

• Satellite Pro L100 132: the battery is only 2000mA

  Hi all
  I bought the model L100-132. The battery is only 2000 mAh and lasts 1 hour. I turned off anything, the power set MAX_BATTERY saver, but it gives nothing. All the sites he says last for more than 2 hours, and some say it's almost 3: 00. OK, so if they have so long and then they gave me too little!

  I should not receive at least 4000 mAh?
  Maybe someone has this model with the same small battery?
  Please, answer if you can at [email protected]

  Thank you.

  Well, I think that the laptop will be delivered with a standard 2000mAh battery, but you can order a stronger battery with perspicuously much more performance.
  I visited and checked the site Web of Toshiba Options and accessories, and you may find additional batteries:

  Battery Pack (6 cells, 4300mAh) PA3399U-1BRS
  Battery (Li-ion, 4000mAh, 6 cells) PA3465U-1BRS
  Battery (Li-ion, 4000mAh 8-cell) PA3506U-1BRS
  Battery (Li-ion, 4300mAh, 8 cells) PA3457U-1BRS
  Battery high capacity Pack (Li-ion, 12 cells, 8600mAh) PA3400U-1BRS

  But in addition, you need to know the battery working time depends mainly on the use of the laptop.

• Satellite Pro S300 - HDD in caddy is not recognized by BIOS

  I replaced the original HARD drive and installed a new SSD that works very well.
  Installed the W7Pro and all updates.

  I do not use my burner so I replaced the CD drive and installed a shopping cart with my old HDD to have more disk space.

  When I start my laptop, I see a message of ERROR of CD-ROM.
  In Device Manager the caddy and or the HARD drive is not displayed.

  I tried to change settings in the BIOS (according to Toshiba utility the latest version), but even in the Bios is no information about this SSD or HARD drive installed. (or the CD player when I re - install this drive again)

  What's not here? Do I need a BIOS updated allowing the 2nd HARD drive?
  Or if I forget a setting somewhere?

  NB in the BIOS HARD drive drive settingis according to ACPI, the list below it is referred to as IDE device.
  When I enter the BIOS IDE instead of ACPI, I still see the CD-ROM ERROR when starting and after this message, the screen is blue and no other activity.

  Relevant information from PC:
  Model name Satellite Pro S300
  Part number PSSB0E-02H00FDU
  Serial number: 88091121
  Version of the OS Microsoft Windows 7 Professional 6.1.7601 Service Pack 1
  Version of the BIOS Version 3.00
  Processor Intel (r) Core (TM) 2 Duo T5670 CPU 1.80 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 255,953,203,200 [bytes] 238.375 [GB]
  Capacity of the hard drive space free 200,118,833,152 [bytes] 186.375 [GB]

  IDE Device V4-CT256V4SSD2
  TEAC DV-W28S-RT FW version = 7.0 D

  > What is the problem here? Do I need a BIOS updated allowing the 2nd HARD drive?
  > Or if I forget a setting somewhere?

  To my knowledge, not all laptops support a 2nd HDD rather than the ODD (optical disc)

  Also, not all CD/DVD drives are compatible and could be used for all laptops.

  So agree with the user above and I think it's the problem of compatibility also.

• Satellite L100: CD/DVD drive is not recognized in the Bios or workstation

  Satellite L100 - 170 No.PSLA3E model 02501QEN under Win XP.

  The icon of the CD/DVD drive has disappeared from the desktop and is not listed in the Device Manager or showing in the BIOS.
  There is power to the drive and the tray ejects OK
  I tried to use the ease of adding new hardware in the Control Panel, but it does not list a CD player.
  I removed the disc and then re - it sitting, but it made no difference.

  I used the restoration of the system for the last available date 26 January 08, but it does not restore the CD player... and I have none, he worked at that time.
  I don't think it's a faulty drive, because he is picking up power and when you insert a CD, it starts as if she was about to read the disc, but nothing appears on the screen.

  The laptop belongs to a child with autism and all I can get out he is "I don't know" when asked what happened to the laptop.
  Sorry I don't have any other information.

  Can anyone help.

  Thank you

  Jan

  Well, usually if the CD/DVD drive doesn t appear in the BIOS or BIOS cannot recognize the ODD then chances are that the CD/DVD drive is malfunctioning.

  But the best way to check this is a new installation of the OS. You should try to boot from a bootable XP CD.
  If the laptop would be able to boot from the CD, then the material is ok.

• Satellite Pro A100 - CD/DVD drive is not listed in the Manager of peripherals and BIOS

  Can Hi anyone tell me what is wrong with this laptop?

  The problem is im using my DVD - ROM drive and it stops working. I went into Device Manager and it wasn't there and it was not in my list of drives. I went and checked the BIOS, it is not listed there either and the BIOS pick up all get them is check the cable or the conection.

  Would be grateful if some knows what happened or if my hard drive is gone.

  Thank you

  Hello

  If the CD/DVD drive is not listed in the Device Manager and BIOS, it seems to be defective and must be replaced.
  What do you think about this?

  You can exchange the car yourself. Check for a compatible CD/DVD Player user manual or go to an authorized service provider. Technicians can order a new drive to swap.

  Sorry, but if the drive is not listed in the BIOS seems to be defective.

  Good bye

• Re: office jet pro 8600 connect with router but not recognized on the network

  BUT... it did NOT work for me.

  I have the same situation:

  1. I bought and installed e-8600 HP OfficeJet Pro on my Linksys wireless network, while it was usable by anyone with connectivity to my wireless network.  It is installed without problem.

  2. I need to reconfigure and move my Pro e-8600 to my Linksys Wireless to my network routers NETGEAR AC1450 wireless, so I removed the printer and uninstalled all the software Pro e-8600 my laptop ACER running 7/Windows-b4bit.  I have restored the default settings on my Pro e-8600, reconnected to my network NETGEAR Wireless and restarted all power of the State.

  3. when I downloaded the latest driver for the Pro e-8600 to hp.com and tried to reinstall the e-8600 Pro on my NETGEAR network, the installation software couldn't recognize the e-8600 Pro on my NETGEAR network.  During the process, the software recognized the network, but the printer is not found.

  Help!

  Hello-

  Have you checked your router settings?

  Although the wizard detects the printer and you can reach the built-in Web server, the printer is not communicating with the router effectively.

• 1 t verbatim USB stick not recognized by the system and will not work

  I used my USB from Verbatim 1 t hard drive in the past and it still works on my Vista computer, but know is is a USB 'unrecognized' device and does not work on my XP.  In the system hardware listing is visible, but there is no driver for it and not available from my computer.  This disc is missing?  How can I get this, my backup disk, of the function?

  Hello

  Try the steps of troubleshooting mentioned in the links below and check if the problem persists.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Note:

  BIOS change / additional settings CMOS (semiconductor) to oxide of metal bad cancause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

• Satellite Pro L20: FN + F8 key does not work after the installation of new

  Hello
  I just reinstalled xp on my laptop and I can't find drivers that work my hardware (F8) wireless function key.
  Unfortunately I don't have the CD of drivers Toshiba with me, I work as an expat abroad so I count on the official website of Toshiba for my drivers.
  I downloaded all drivers successfully vital but can find no reference on the site that will help me with the problem.
  I tried to turn on the radio via the LAN setting but when I try to activate I get the message telling me to turn on the hardware!
  Any suggestion would be accepted with gratitude.

  Thank you

  Hello

  On the Toshiba driver page, you will find the installation instructions how to install all the drivers of Toshiba.
  It is very important that pilots will settle in the right order.

  In addition, if you want to spend on the WLan, you have to activate the WLan switch on the side of the laptop and also to enable the antenna WLan with FN + F8.

• Office jet pro 8600 connect with router but not recognized on the network

  I just installed new router e1200 lonksys. JO HP 8600 pro connects with the router, but the printer cannot see 8600. IP 169.254.223.37 on said install ip is the placeholder and printer not connected. have restarted once 1000 and tried to reconnect. New router has OMP and thrust of 3 seconds the button on the router. Also failed to connect on the router definition reviews

  8600 worked fine on the old router. Problem started when I connected the router after that cable modem connected then modem vonage. Previous setting was cable - vonanage and wireless router - all worked well then.

  Also downloaded 8600 new complete software after losing the Wi - Fi connection - please help!

  If the Ethernet cable is plugged into the printer, it will disable the wireless radio.

  If this is not the case in the network menu, network by default.  Then, in the same network menu, run the Wireless Setup Wizard.

  If this does not work, we will come on your new router a bit.

• OfficeJet Pro 8630: Tray 2 by default not recognized on the manual copy

  Although I have tray 2 (plain paper), selected as the default tray and Tray 1 (photo paper) locked, manual copy from the printer control panel causes flow use of tray 1.   Tray 2 must always be selected manually if the printer has "slept" since the last copy operation to manual.

  How do I get the printer to recognize that the tray 2 IS really the default?

  Hello

  From the screen to your printer press on copy, then click settings, then select the required tray.

  Then select as set as new default and confirm any change, then try again.

  Kind regards

  Shlomi

• Hardware not recognized by the system

  Hello. I use Windows Professional SP3 and it says its hardware installation and won't let me use the Add Hardware Wizard.  I saw an answer to use Microsoft Fixit, but unfortunately, it says my system is not supported. Is there anything else I can do?

  I have

  Hello. I use Windows Professional SP3 and it says its hardware installation and won't let me use the Add Hardware Wizard.  I saw an answer to use Microsoft Fixit, but unfortunately, it says my system is not supported. Is there anything else I can do?

  I have

  Hi Theross...

  When you get this message? You say what kind of material is it?

  You can use the PC when it starts on the desktop? If you can, do the following:

  Click Start, run and then copy / paste the following command, and then click OK: msinfo32
  (If you have run on the start menu, hit instead of key Windows + R)

  When the menu msinfo32 opens, open the tree in the left menu and then click "problem devices".  Nothing is displayed in the right pane when you do this?

• My Nec DVD RW ND-3520AW drive is not recognized by the system due to the corruption of recording possible

  I have a Gateway desktop and 510 x 86 with Windows XP Home SP3 and Internet Explorer 8.  My system does not recognize my DVD NEC drive due to recording possible file corruption.  How can I clean or set registry entries and/or device driver and get Device Manager to recognize the drive?

  http://support.Microsoft.com/kb/314060

  FixIt have a bad reputation on this forum, so you can go directly to "fix it myself" bit (for XP).

  Let us know how you go.

  Tricky