Satellite Pro L100 does not work after BIOS update

Okay, the computer is a Toshiba Satellite Pro L100 PSLA4. Problem occurred during an update of the BIOS on the official website of Toshiba. I downloaded the zip file, it extracts and activated the .exe file at the Interior.

The window opened by the .exe is a program flashing BIOS, the .exe wrote at the same time a new BIOS file to a temporary folder.
When he tried to use the program I got was an error saying it couldn't find the new BIOS to the entrance.

I tried again only to get the same error. Then I left the laptop for several minutes and when I got home, I found a laptop no longer Virgin.
On which I hear by an obvious lack of BIOS functions i.e. power LED does not change when the connection to disconnect it from the power outlet and the fact that I had to take out the battery to turn off the machine. When the power is turned on now it is check readers and restarts (no display, no beeps)

What should I do?
The first thing that comes to mind was to reset the BIOS.
A problem, I can not find the RTC battery or a rider switch.

Hi George

I can't tell why it happened, but I can tell what happened.

In my opinion, something went wrong during the process of updating the BIOS and the ROM modules was not writer properly.

Simply says the BIOS update procedure has failed.
In this case, you will need to contact the ASP in your country for a fix
The technician must be able to rewrite the ROM module and updated the BIOS again.

Good luck buddy

See you soon

Tags: Toshiba

Similar Questions

  • Satellite Pro C850 does not work after Bios Update

    My satellite pro c850 cd does not work after updating the bios of toshiba.

    What should I do?

    Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
    Flash the BIOS correctly?

    Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

    In most cases a special disc of crisis of the BIOS would be required to operate
    Not sure if you can get it repaired by your own
    Check this thread. Maybe this helps:

    Otherwise you need help of the authorized service provider available in your country.

  • Satellite L750 - Bluetooth does not work after BIOS update

    I am preparing some L750 notebooks for use and accept updates from the Toshiba, which included an upgrade of BIOS v1.70 for v2.00. He appears after this update occurs that Bluetooth no longer works, i.e. try to install Bluetooth Toshiba stack will fail as it is said that the Bluetooth radio is disabled and must be turned on for continue.

    As the L750 (model PSK1WA-0C300R) is not a hardware switch to enable or disable the Bluetooth/Wi-Fi, the only option available (Fn + F8) is unsuccessful. I ran a recovery of factory default installation and Bluetooth still does not - resumption of classes does not restore the BIOS to the previous version. I have 5 of the model and confirmed the update of the BIOS is the cause. Two laptops now have v2.00 and Bluetooth has been tested in the work before the update of the BIOS.

    If Bluetooth is not critical for the environment which I deploy these notebooks, it's an annoyance I want to solve. My questions are: has anyone encounter the same problem and managed to resolve it? Is there a BIOS v1.70 available for download to restore the functionality? Y at - it an update of the BIOS > V2.00 for solve the problem I have? Thank you.

    Hi JasonL750,

    Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default settings of the installation. Also, make sure that Bluetooth is enabled in the BIOS if there is such an option.

    In addition, it would be interesting to know what happens if you use the FN + F8 key combination. Don't you see that he has an option to turn on Bluetooth and if so what happens if you do this?

  • Satellite A200 (PSAFCA) does not work after BIOS update triying


    I was hoping if someone could help me pls.

    I have a Toshiba Satellite A200 (PSAFCA).
    Recently, I tried the bios update and while I flashed the bios I forgot to plug the laptop into the current and the battery was flat at half way through the flashing.

    Thus the laptop now won't post when I turn on and all I get is a white screen.
    I was wondering if someone could pls advise me on how I can get the old bios back or even a method of flashing it if I put the bios back in so I can at least get a message to display on the screen.

    Any help that you provide would be greatly appreciated as I am at a loss.

    Thanking you in advance


    > while I flashed the bios I forgot to plug the laptop into the current and the battery flat at half way through the flashing.

    Well buddy, the cell must always be connected to the mains during the execution of an update of the BIOS! This is very important!
    Now it looks like the update of BIOS didn't t run and finish correctly and the ROM module seems to be flashed incorrectly.

    Unfortunately, there is no other solution to communicate with ASP guys and ask for help! They should be able to help you.

    But note; in the worst cases, the ROM module is unfortunate and the motherboard needs to be replaced.

    Good luck

  • Satellite L300 - webcam does not work after BIOS update

    I've recently updated the BIOS to 2.2, and the webcam has stopped working. He disappeared, and there is an unknown device in Device Manager in USB bus controller.

    I've tried everything, even with the new Vista OS pure but nothing as there is no webcam I have installed the drivers but not recognised so I would like if I can get the BIOS to 1.5 and fix the webcam. If I can cos I need. Is this possible?


    I put t think its BIOS problem.
    First the unknown device (webcam) appears in the Device Manager and it means that a device has been recognized by the system and the BIOS.
    The only reason why its listed as unknown devices is: the driver is not installed correctly.

    After update BIOS, you have to put back the BIOS to default. Access BIOS by pressing F2 and in the BIOS, you can use the button to default to F9 and F10 to save the changes.

    After that you should start the machine and need to go to Device Manager.
    Mark the unknown device and delete it from the list (if possible)
    Go to control panel-> software control and check the list of software for webcam software (from chicony). Uninstall this software if its part of the list.

    Now, restart the laptop.
    Clean the operating system using CCleaner and install the correct webcam for Vista software. Note: pay attention to the 32-bit version or 64-bit.

    If the installation fails, try the Toshiba Recovery disk and define the notebook back to factory settings.

    By the way: decommissioning of BIOS is not possible because the old BIOS is not downloadable.

  • Satellite A300-20 b - Touchpad does not work after BIOS update

    I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

    I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

    Does anyone have the same problem?

    Hey Buddy,

    Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
    Also, try to load the default settings in the BIOS.

    What happens if you connect an external mouse to the laptop? It work?

    I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

  • Satellite A500-17 x - micro does not work after BIOS update

    I have a Toshiba Satellite A500-17 x which I have just updated the BIOS to version 2, as recommended by the tempro software. Now with the new update my microphone does not work. Where can I download a copy of the old BIOS?

    ({I used winphlash64 in advanced mode to restore the original backup, it does to the computer, but it just gives the new bios to}) Thank you rich


    BIOS cannot be demoted in windows mode.
    Even if you use an older version of BIOS update, you will get an error message saying that the latest BIOS version is already installed. So, forget the downgrade.

    By the way: I put t think the update of the BIOS assigned the microphone.

    Go to control panel of-> sound-> recording tab.
    Here you will see all the available recording devices (micro)

    Activate the microphone it (in this case the people with reduced mobility) and set its default value.

    Where it works: reinstall the audio driver.

  • Satellite L735-103: one key does not work after BIOS update


    I got a Sat L735-103, part no: PSK0CE - 00N0OUEP and I download the bios for this pc, toshiba Web site.
    I have updated bios with no problem, but now a realization thatm a key (the key located in the good of "* f ' and 'z') of the keyboard does not work.
    I have a plate with windows and linux, and the result is the same.

    Maybey I need to go back to the old bios, but in the toshiba Web site only have a bios download: (.)


    Somehow, I can't believe that this button malfunction has something to do with the new BIOS.
    Have you noticed the anomaly key immediately after the update of the BIOS?
    You have default BIOS? If not, access the BIOS by pressing F2 when starting the laptop.
    Here, you can set default BIOS and then save the changes.

    If this is not enough, I would recommend contacting the Toshiba ASP because the technician must check whether the button is defective. In this case, replace the keyboard. The technician would be able to downgrade the BIOS as well and could check if it of really a BIOS issue.

    To find an authorized Toshiba (ASP) Service Provider anywhere in the world, please visit:> "Support and downloads"--> "to find an authorized service provider" (down in the menu maintenance & repair).

  • Re: Satellite L500 - Wifi does not work after Windows Update

    The wireless on my Satellite L500 worked perfectly before you update windows. However, after the updat when you try to connect to a wireless connection, it says that "no connection is available.

    I then clicked on fix to try to find a solution. Then the message "the diagnostic policy service does not work. Using Ctrl + Alt + Delete I went on services and attempted to start the DPS manually, but the message "Diagnstic political service on Local computer started and stopped. Some services stop automatically if they are not in use by other services or programs. »

    This message puzzled me enough as it is said that the Wifi is infact on however in a attempt to FN + F8 F8 option does not appear. Any help would be greatly appreciated.


    For Satellite L500, there are already some threads here in the forum:

    Additionally, make sure that the DHCP and DNS services are running. Type of startup is set on "Automatic" and try to restart both services.

  • Satellite C55-A-16Z - graphics card does not work after BIOS update


    I have a portable Satellite C55-A-16Z with windows 8 and a Nvidia geforce 740M graphics card.

    Last week he asked me to update the version of the bios at 1.30.
    The bios update was successful.

    However when I restarted my laptop I started having a BSOD dgxkrnl.sys.
    Correction of the error and restarted for an another BSOD Windows, and after the second solution, I stopped making BSOD.
    But now, I noticed its games running, if not use the dedicated card, but use the 4000 Intel.

    In the settings Nvidia dedicated card is configured to be always on.
    It seems that my card is missing, but it appears in Device Manager.
    I tried to delete, update the drivers and the default factory reset, but nothing helped.

    Also, when I go into Options power the Intel card is listed and when I disable the card intel in the Device Manager it starts to use the graphic viewer for windows.

    How can I get my Nvidia card to work again?
    Any help is appreciated.

    Thanks in advance.


    After the BIOS update the BIOS should be set to default settings.
    You can do it in the BIOS.

    In addition, you mentioned that Windows 8 is still installed on your laptop.
    8.1 to win has already been published by Microsoft and I highly recommend that update you the system of 8 to 8.1 Win Win.

    Before you start the upgrade to 8.1 win, you should check and read the instructions step by step for Toshiba:

    I guess that after the Win 8.1, nVidia graphics card upgrade works well also.

    Your comments would be greatly appreciated.

  • Satellite A50 does not work after BIOS update

    Hi all
    I tried to Flash my BIOS through windows such as recommended on my website of the manufacturer of the laptop (Toshiba). I guess that the process was not as after only 2 hours still "don't interrupt" message displayed. I had to force power off of my PC. Now it is not initialized.
    The Laptio is Toshiba SA50-114, series of satellites. Model n - PSA50E

    I tried the suggestions in the following link
    However, it did not work.

    However, I don't have the disk recovery and file/ROM BIOS tool. Have tried to search on the internet, but without any result.

    Can someone help me please
    1. How can I update the BIOS to get my PC to running back.

    2. to turn towards links where I can find the files in the link above.

    Thanks in advance.
    Best regards

    > 1. How can I update the BIOS to get my PC to running back.
    Not possible if your ROM BIOS module was bad flashed.
    If you are a lucky man only the ROM module must be flashed again using a special procedure. But this can be done by a service provider authorized in your country.

    > 2. Point me to the links where I can find the files in the link above.
    There is no link! You need to ask to help ASP.

    Good bye

  • Satellite P855 - 10 H does not work after BIOS update

    I bought a new laptop Toshiba Satellite P855 - 10 H recently and there is no problem. Yesterday (August 12, 2012), I saw a warning from center of Toshiba it is has updated dated August 1, 2012, for BIOS and followed all the instructions until you reboot. Laptop not a not restart after you finish all the process successfully.

    Closed and now I can't start. Downloaded the latest bios file in a usb port on the support site, but because it's the exe, I couldn't use it.

    Any suggestions to save my new laptop?

    For me, this looks like screw at the top of the BIOS.
    I put t know whether you will be able to get this working again, but check it please

    Maybe it will help you.
    Be so kind and post comments.

  • Satellite A135-S2286 - USB ports does not work after BIOS update

    I recently had the dreaded BIOS password prompt problem. I checked online to the toshiba support site and took the laptop to a toshiba authorized service center and is fixed by getting the updated BIOS updated to 1.60, but after update BIOS, none of my USB ports work.

    When I connect a USB device, a warning from yellow pop up comes up unrecognized USB device. The same USB device works fine on other computers/laptops. I searched online for a solution and found on a lot of people have the same problem, but did not find any fix for this error.

    It will be useful, if someone has a solution for this error.

    Hey Buddy,

    Is there yellow exclamation marks in Device Manager next to USB ports or they appear correctly?

    If you notice a yellow exclamation you must remove the USB port and restart the computer. All USB ports are installed automatically, you do not need an additional driver.

    I hope that it helps :)

  • Re: Computer laptop Satellite U does not work after BIOS update

    I was updating my BIOS.

    My computer restarted abruptly, saying: there was a problem and that a check should be performed.
    After reaching 100%, he's stuck. I waited for a while, but eventually it turned off.

    When I rebooted, it stopped working correctly.
    The screen, keyboard and USB ports do not work.

    Can anyone help with this?


    Looks like something was wrong during the update of the BIOS.
    In this case the module ROM was flashed properly and therefore your laptop cannot start properly.

    I think the BISO ROM must be flashed again, but this can be done by a Toshiba ASP because guys have had a trad-BIOS version that is necessary to Flash the ROM module

    Good luck

  • Satellite X 200-20 s - LAN does not work after BIOS update

    Hi all

    I've updated the BIOS version 2.7 and NIC LAN just disappeared from my list of device. The wireless network card works fine however. When I plug the ethernet cable, the green light turns orange not, so I guess that it is not broken, as it worked fine before the BIOS update.

    I tried different drivers lan Windows XP and still nothing. Any ideas please?

    I have Windows 7 x 64 installed.

    LAN option is listed in the BIOS boot menu?

    If you have tested with Win7 and WXP maybe you should do finally test and install recovery image original Toshiba that you got with your laptop and see what happen when you use the laptop with the factory settings.

Maybe you are looking for

  • Is the Airport Express optical fiber compatible? (Verizon Fios)

    Is the Airport Express optical fiber compatible? (Verizon Fios) Verizon wants me to have one of their routers. Is it necessary if I already have an AirPort Express?

  • HP Photosmart 5520: Printer already done

    I've implemented on behalf of HP plugged and it shows no added device. When I try and add my printer, I get an error saying that the printer is already done and I need to remove this device. How can I work around this error because there is no printe

  • Pavilion dv6z-6100: HP Support Assistant Download Link

    The link to download the latest version of HP Support Assistant from the HPSA page no longer (at least for me). When I choose the download to laptop, I get redirected to the language/country selection page and selecting a language just redirects me t

  • Looking for upgrade my 8500 GT 640 XPS

    I guess that it's that time again when it is necessary to upgrade my GPU.  Since I'm a video card recommendation excellent last time when I upgraded my XPS 410, I thought that I ask again this large community of my 8500 video card recommendation. I'm

  • DVD will not play on the standalone DVD player