Satellite Pro L20: Showing empty after waking up from hibernation

Similar Questions

• Satellite P200-144: Resolution changes after waking up from hibernation

  On my P200 Satelltie I put the graphic resolution of 1440 x 900,
  but on wakinging it from hibernation, it reduces the resolution.

  Also about removing an external display, it does the same thing.
  Annoying because I have to reset the resolution and rearrange icons desk top of the page every time.

  Any body know how to pass this auto reset cut, so that it remains with the setting of the resolution?

  I have too many P200, but everything works fine. You have operating system using recovery DVDs.
  By the way: what operating system do you use?

• RALink RT3290 stops responding after waking up from hibernation, loss of connection

  RALink RT3290 802.11bgn Wi - Fi adapter (driver 5.0.37.0 25.11.2013) stops responding after waking up from hibernation, loss of connection. To recover, it must be restarted (toggle), what happens no wired connection, for example, obviously, drivers Ralink need good alarm clock a reset. Thank you in advance.

  Looks like that driver update solves the http://www.mediatek.com/en/downloads/ problem

• Satellite Pro M70-275: screen doesn't work after waking up from hibernation.

  Hello

  I sometimes encounter this problem: when starting the hibernation (not sure of the English term, although that. "light sleep" mode in WinXP...) the screen turns on again. The operating system seems to be up and running again, but I really don't know because I do not...
  Sometimes it works fine, but I would like that it works all the time.

  Any ideas?

  / Johannes Ogren
  Gothenburg, Sweden

  Hello

  Will there be the same situation after waking from sleep mode?

  James is right. Usually, this kind of questions is fixed with the new version of the BIOS, but you can also try installing the latest version of Power saver utility.

  If anything maybe you must reinstall the OS using supplied recovery DVDs.

• G560 - network disconnected after waking up from hibernation

  During the last two days, my laptop Lenovo G560 (running Windows 7, 64-bit, BIOS 2.10) has had problems with its (wired) network card after waking from hibernation. It is shown as disconnected (even as if the cable was physically detached). The only big change I played in the last few days has been installed Service Pack 1. However, the problem only appeared about two days after, so I don't know if this is related at all.

  In this case, IPCONFIG shows the following for the NETWORK card:

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  If I try IPCONFIG/renew, I get

  Windows IP configuration

  No operations can be performed on the connection to the Local network, although it has its media disconnected.

  Hovering over the said tray icon "not connected". Troubleshooting of course can't find anything. Also, there is no weird in event viewer entries (unless they are hidden somewhere in other modes). Basically, the behavior is identical to when the network cable is physically disconnected (disconnected).

  In addition, disconnect the network cable, wait a few minutes and in him plugging back again once does nothing.

  For now, I have two workaround solutions:

  -system reboot

  -right click on the connection to the Local network (in network connections), select DISABLE from the menu, wait a few moments and then choosing the option ENABLE on the shortcut menu.

  Is there a better solution to this? Speculation on what might be the reason for this problem all of a sudden?

  Right click on my computer > manage > device management > network cards > select wireless adapter > properties > under power management tab, clear the check box to be able to save "allow the computer to turn off this device to save power".

  Restart your computer and check if it works.

  Please post back with the results.

• Satellite P750 - resonding stops after waking up from hibernation

  If anyone can help, I recenty purchased a P750 Satellite equipped with an i7 processor it has 4 GB of RAM. I was experencing problems since buying it. It seems to just stop responding the round icon turns showing his thought but I can wait 10-15 minutes and there is no change. This problem occurs sporaticly and sometimes occurs when loading new programs. The problem happens almost all the time if he entered hybernation and when I wake with the mouse, it starts but when I have to connect to the net, for example, he will bring to the top of the page of internet explore and the round icon will be spinning and it will stay like that for centuries until what I am forced to close it with the start and stop button. When I have this problem I have tried using CTRL ALT DELETE to open the Task Manager but the Manager tasks will not respond.

  If anyone has had the same problem and is there a solution. Note When I turn the disk protection mode HARD the probem seems to happen less frequently but persists.

  Hi captain101,

  Wait a minute, please. Icon of what you mean exactly? I don't know what you're talking about, so a more detailed description of this icon would be useful.

  The more you use the version preinstalled Windows from Toshiba or your own installation?

• Computer is unlocked after waking up from hibernation

  My computer is unlocked when he wakes up after hibernation, it's that everything works well, but these last days, it is weird. I tried to restart my computer in Eve extended and checked again and same thing.

  Well, I only came here for a workaround, really.

  Found the fix here:
  The option is grayed out, had to reset it.
  Fixed now.

• Satellite Pro P300D-21F - how I wake up from hibernation?

  How do I wake up? tried the mobile mouse by pressing different keys. If you press the power button / stop watch computor message was not closed properly.

  Hey,.

  Normally the computer may be trampled to the top of the hibernation mode when you press the power button. The same button as you start the computer normally.

  What operating system is currently installed? What is the message you get exactly?

• no access to internet after waking up from hibernation?

  I have a laptop HP G42 - 23OUS windows 7 Home premium PC. I bought ebay last manufacturer, was refurbished. Also, I use wireless internet. I totally love it, but on the one hand - whenever the computer wakes up from hibernation mode it does not connect to the internet! I have to restart the computer before it will reconnect to the internet, which the ruins completely the whole mode of hibernation in a first time!
  To avoid this problem, I changed so that while that plugged power settings it will never go into hibernation mode & rather will just idle until I have press the key again. That said, it is no longer a huge problem, but I'd still like to know why this happened & what, if anything I could do to fix?
  Thanks for any info you can give me about this someone ' one/everyone!

  Hello:

  Here is the link to the latest driver for your Broadcom wireless card. (as of 02/13/12).

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102505-1&cc=us&DLC=en&LC=en

  If all goes well, the problem will be solved.

  Paul

• Restart the problem after booting on Satellite Pro L20 - approx. 4 seconds

  I have a toshiba satellite pro l20 series and it worked fine until yesterday.
  the problem is that it restarts... Well actually, he stops in about 4 seconds after the start, remains closed for 1 or 2 seconds and then again
  same problem occurs with or without the battery.
  all I see is the Toshiba logo. I can enter the bios and when in the bios it does not stop.
  When I get out of the bios, saving the changes he stops. and then begins by itsself after 2 seconds.
  Please help me... How can I fix?

  Hello

  If the laptop goes through the Toshiba logo then maybe there is just something wrong with the software.
  In this case, the first step should be again install the Toshiba Recovery CD.
  Put the CD in the drive and try to boot from the CD.
  After installation, all should work properly.
  If it's not, so I guess there is a serious problem and service guys should check the laptop.

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite Pro L20 does not illuminate

  Hope you can help. We have a 5 years satellite pro L20 who never gave a lot of days. It runs from Win XP, had an upgrade (crucial) memory to 2 GB and a new battery 4 years ago 4 years ago. 2 days ago, he simply left with the same noise you get when force a shutdown by holding the power button down. I tried to boot with no battery, just the sector and only on a charged battery. All to nothing does not.

  I then read the button of power with the battery and removed sector I did after leaving it overnight. When I replaced the battery it started as usual and lasted 30 seconds before turning off again, and then he was dead. I have tried all combinations with the ram up to 1 stick or kidnapped and attempted to get the bios with the HDD outside as well. Still nothing.

  I noticed that when I put the battery in 2 of the 3 flashes briefly, and now the button of pwer while pushing the battery causes a brief start 4 seconds.

  Any ideas as to what this may be? I suspect that the hardware and software. Also, I tried a different power adapter, once again no results. It stays just off.

  Thanks for any help...

  Hello

  I'm afraid it looks like a serious m hardware problem
  My first idea was a malfunction of the RAM in such a case, you could replace and test the memory, but it seems that you have already tried

  In my view there s something wrong with a motherboard or a part on the motherboard :(
  In this case I n t think a replacement of the motherboard would be useful since this part is very expensive

• Satellite Pro L20 goes wrong with i.f. audio Fast Track USB

  Hello!

  I used my Fast Track USB on new Toshiba Satellite L40 and I never had any problems with it. I could put a low latency and I did a few songs with him.

  Yesterday, I bought another laptop, thinking of recording studio at home. He used the Toshiba Satellite Pro L20. It does not work with my interface. When I listen to music on Winamp or anything on Fruity Loops, I hear strong clicks, pop, noise. They introduce samples, or they appear during playback, or after a sample is stopped.

  I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba more? The only chipset drivers are old, and you can download em only from site Web from Toshiba. The chipset is ATI Xpress 200 M. Its pilots are with the graphics card. Recently I noticed that you can download "ATI Catalyst Legacy Display Driver for Windows XP - card mother/IGP Drivers 9.11" and CRACK to make it possible to install on a mobile device like the L20. Yep it's funny, but its impossible to do otherwise!

  things that I have tried and they have still not help:
  replacement of drivers #, original were released in 2004. I installed the version.
  driver settings #, low latency, high latency
  # asio and different settings
  pluging # USB interface to another.
  # try what happens when I use the battery and when to use the adapter
  # update BIOS
  # off units such as wifi, card sound card on board
  # checked IRQ list

  persistent organic pollutants will always appear.

  my config:

  Toshiba Satellite Pro L20
  Win XP Home SP3
  Celeron M 1, 5 GHz
  896 MB of ram
  M - Audio Fast Track USB, drivers: 6.0.2

  Kind regards

  Initially, I wonder that you use old notebook L20 now. You have no more L40?

  You must understand that the Satellite Pro L20 is older model laptop and also not the best choice for such operations. This laptop is probably designed for simpler day-to-day operations such as the internet, e-mail, office, a little bit of multimedia and that s all the.

  I don't mean good old classic doesn't work with your external device, but you will be lucky if someone has the same external device and the same model of laptop and write about their own experiences.

  Do you use factory settings or you have installed the own operating system?

• Need of repair for CD-rom update on Satellite Pro L20

  Hello
  Is there anywhere I can download a repair manual for Satellite Pro L20 that I just bought a dvdrw drive & want to adapt it myself

  TIA

  Hello

  Unfortunately, you won't find manuals repair on the Toshiba site. Only Toshiba service partners have such documents and the ability to use laptop manuals.
  As far as I know, the reader is fixed with a screw that is placed at the bottom of the unit and under the keyboard.
  After the withdrawal of these two screws, you can disconnect an optical drive to the connector on the system board.

  But without any experience, you must remove all readers. I think you should ask the service of Toshiba for help because he has more experience in such cases

• What is the part number for Toshiba for Satellite Pro L20

  Morning

  Anyone happen to know the part number for Toshiba Satellite Pro L20? I seem to have misplaced mine.

  Thank you
  If

  Hello

  I put t know what number you mean exactly, but there are several different models of Satellite Pro L20 what different numbers.
  All the necessary details and all the serial numbers, you will find on the label that was placed at the bottom of the unit. Please check this box.

  If you need these details for the part order or recovery cd, you must contact the after-sales Service of Toshiba partner. Here, you can order parts all supported.