Satellite Pro L300-1 b 9 cannot connect to my wireless router

Hello!

I activated the nw wireless on SAT L300 PRO 1 b 9 - but with a lot of struggle...
First I had to find the switch to turn on (I never got :-)).
Then I had to uninstall Atheros Windows and set flags on (activate) in the Windows driver.

But in Linux and Windows, I couldn't connect to my wireless router.
My luck was that some of my neighbors have a wireless network security-disabled, open, I could map to test.
The test was succecfully with this network, but my wireless router was inaccessible.
The other machine I could reach it.

The result was:
If I set the router to broadcast the SSID, the two OSs (Ubuntu + Windows) can use the wireless network.

But if I turn off the broadcast (to protect my router), the network driver is unable to use my router, it does not matter I set the SSID...

A router is WRT54G, and he works with other computers if I hide the SSID, but as Satellite Pro L300 unable to connect (with this option).

Someone knows why? What should I do to I could hide the SSID to the bad guys?

Thanks for any help!

With regard to:
DD

I put t know what Windows operating system you use, but if you use original Vista, I think that, good WLAN driver is part of the package. For the wireless network adapter must be properly installed.

It is not easy to say what the problem is here, but if the laptop can see and detect your WLAN network side laptop computer s everything should be OK. Try to reboot your router and check all the settings.

In my opinion, there is a problem with the WLAN settings.

Tags: Toshiba

Similar Questions

  • Satellite P750 - cannot connect to my wireless router.

    My laptop cannot connect to my wireless router.
    I tried to connect with the other laptop and it works.

    Help me

    Recommend to read some threads here in the forum "Wireless issue" of Toshiba.
    There is a lot of discussion on WiFi problems and how to solve this problem.

  • Satellite Pro L300: Noise of nasty when connected to your hifi installation comments

    Hi, thanks for reading,

    I just bought a Satellite Pro L300, to use for DJing. I use a Behringer USB mixer, and when I plugged it to the top there is a sound really bad comments coming out of my speakers.

    I tested it in the headphone jack output by connecting the laptop directly to my sound system and I hear the same comments.
    I went to check through troubleshooting and audio driver settings, everything seems fine.

    I thought then he might have been a problem to the ground, so disconnected the power to the laptop and it worked, the Larsen effect stopped. I tried to use a different power supply to an old laptop and the noise starts again.

    Is there anyway that I could solve this problem? I need to run food as the custom of the last battery life long enough while I DJ.

    Thanks in advance

    > so thought that it might have been a problem to the ground, so disconnected the power to the laptop and it worked, the Larsen effect stopped
    I agree with you and Akuma appears that this noise is related to the question of land
    In many cases, different people said they could solve this by using a 3 cable and AC adapter power cord.
    These special adapters can be ordered from the authorized service partner.

  • Satellite Pro L300 will not start - cannot get into the BIOS

    Dear,

    I got a satellite Pro L300, width a HARD drive partitioned, with Win XP installed C and D with Windows 7 installed, the problem is the following:

    Days when I turned on my laptop, the OS splash screen appears, stop boot on Toshiba logo process.
    In addition, I can't enter the BIOS with the F2 key or the Boot Manager by using the F12 key.

    Help, please.

    > stop boot on Toshiba logo process
    This means that the laptop can not pass the POST (power on self test) properly and it would mean that a hardware problem has been detected on the motherboard.

    Remove one of the modules RAM (check both) and try to turn on using a single module of RAM.
    It is possible that one of the RAM modules is defective

    It would also be possible that the motherboard is malfunctioning, as you can see, it is hard to say what role could be wrong, but what looks like a serious hardware failure

  • Satellite C660-1CZ cannot connect to my wireless router

    Hello comrades,.

    I have a problem to connect to my wireless router.
    We have 3 notebooks here at home, and all are able to connect.
    But my Toshiba laptop cannot connect. I don't know why...
    The latest drivers are installed for RTL8188CE.
    I'm sure it's the latest driver from 2011.

    My operating system is Windows7.
    I bought yesterday and tried everthing to connect with my easybox 802.
    I also changed some settings on the router.
    Can someone help me pls?

    On other laptops, the SSID of the router's Easybox-D77327, but my Toshiba shows just Easybox-D57327.
    Its not the same SSID but the router is good.
    In my view, the problem is that my laptop shows me a bad SSID of the router, but how to solve the problem...?

    You have the same problem when using the AC power mode and battery as well?
    Can you connect to the router if WLAN is not secure?

    An error message occurs when you try to connect to your router?

  • local access only - cannot connect to my wireless router

    I can't get my laptop to connect to my wireless router, all I get is local access only, but my laptop with windows 7 connects very well.

    Hello

    Maybe this can help.

    Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

    When the work turns on the Wireless security.

    Note * people sometimes make mistakes in writing and retype the password for security.

    Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

    --------------------------------------------------

    I really checked and configured every thing and it doesn't work.

    Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
    some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .


    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • HP photosmart 5520 cannot connect to the wireless router

    The printer has worked I went on holiday, and now it will not work. I have run the wireless network test, and it says "hp printer is unable to connect to your wireless router.  The wireless router is connected and works fine.  My hp wireless computer (windows 7) works very well.

    The structural 'found ssid network name' report, said down

    But "current configuration" has shown the SSID

    can anyone offer a fix?

    Help

    colleenmercy

    Hi colleenmercy,

    In the network menu, select default network.  This reset the current network settings and will help you reconnect the printer to the network.  You can use the Wireless Setup Wizard or reinstall the HP software to reconnect.

  • Computer Vista laptop cannot connect to new wireless router

    I had the laptop for about a year and a half, and he has a history of being pretty skittish about the wireless connection.  Often he simply refuses to do so.  During vacation last year, for example, the other three laptops connected family easily to wi - fi hotel, but mine has refused to.  There are a lot of other moments when the laptop could not connect, but I was able to connect to two most important places - home and work - without much trouble, and so I haven't looked too hard to solve the problems of connection up to now.

    This week, I replaced the router in my original configuration.  The old Netgear router kept giving up the connection between her and my ISP.  The new Linksys router looks rock solid in this regard.  I have a desktop running XP computer that is wired to the new router Linksys, and he sees the internet very well.  My laptop Vista unable to connect (wireless), however.  He sees the network with a lot of intensity of the signal, and it tries to connect.  I get a message saying that the connection takes longer than usual, and then another message saying 'connected.'  However, I do not have internet access, and I see other devices (just the XP desktop, really) on the network.  The Network and Sharing Center shows my laptop connected to the 'unidentified network', and then there is a red X between this network and the Internet (represented by a grey globe).  Laptop computer signals its 'access' as "local only".

    From the desktop, I can access the internet, so the router is connected to the points upstream.  From the desktop, I can also access the router configuration pages, and I see that it does not list the laptop as a dhcp client, even if the laptop thinks that it is connected.

    ipconfig on laptop computer displays a wacky IPv4 address: 169.254.2.91 and I guess that the laptop does not get an address passed to the router.  I think that there should be a 192.168. *. * address if it worked properly.

    Now, I was pretty sure my laptop's wireless adapter to work properly.  It always connects to the old router and it always connects to the work.  But to be sure and really test the new router, I went out and bought another USB adapter wireless.  When I plug it into the computer to Office XP, the Office connects to the router and can see the internet (even with the connection cable is disconnected).  So the new router and the new wireless USB adapater properly.  When I plug the USB wireless adapter into the laptop, the laptop still can't connect and still not get a good ip address assigned by the router.

    I've been at this for a few days now, and I could really use some help.  I read a few items in the Microsoft forums that was supposed to fix the problem.  One of them told me to try to start a program called DHCP in the Administrative Tools folder.  I do not have this program on my computer.  Another told me manually change my registry (ouch!) and add a new DWORD value, and set its value to 1.  I did, but it did not fix the problem.

    I would be very grateful for any help.

    Jim

    Alright.  I am home to work and back again.  I have read several posts with people reporting problems similar to mine, so I guess I'm not alone in this.  In a thread, the experts proposed to start in Mode safe mode with networking.  So I gave that a shot.  I still couldn't really connect - just this 'local only' without an assigned IP address.

    One thing I did notice, is that my laptop brand and its wireless adapter seem to get a special mention in most positions.  I have a HP Compaq Presario CQ50 Notebook PC running Vista Home Premium SP2, 32-bit version (even if the processor is 64-bit).  The wireless adapter is an Atheros AR5007.  Several other people with this card have reported problems.  Maybe it's the cause?

    I look into updating the driver for the card, even if yesterday's test with the separate USB wireless adapter showed that the problem could not just be limited to the Atheros card.  To search for a driver update, I connect my laptop to the router with an ethernet cable.  It's nice to see the web on your laptop.  No update driver does.

    For fun, I try to establish a wireless connection with the router, while the wired connection is still in place.  Looks like maybe it worked?  I say a little prayer and unplug the ethernet cable...

    It's a miracle!  I have a wireless connection to the router and beyond, to the internet.  Huzzah!

    The network has a real name, too, instead of just 'unidentified network '.  I want to change the network type from the public to the private, which I was unable to do while he was still 'unidentified '.

    Can I terminate the connection so that I can see what happens when I try to reconnect.

    Another miracle!  It connects to and still see the internet.  Callooh!  Colay!

    Next test: see what happens after a reboot... (please, please, please)...

    Ch-ching!  It works again!

    Final (?) test: reinstall the McAffee internet security suite and restart.

    And it still works.

    Here's a recap of what I found:
    1. laptop could not connect wireless router again, despite dozens of attempts in which I get every available straw
    2. laptop computer could see the internet when connected to the router
    3. laptop could connect wirelessly to the router while the wired connection is in place
    4. Once this first wireless, laptop computer was able to connect to the router even when the wired connection has been removed and the computer restarts

    I would describe my discovery above as a work-around rather than as a solution, however.  It does not always help me stay connected the next time I'm on vacation, for example.  But perhaps the information I provided can help experts to diagnose the real problem a little.

    I look forward to hear something back.

    Jim

  • Satellite Pro L300 PSLB9E: 100Mbit instead of connecting to the network local 1000Mbit WinXP

    Downgraded to WinXP.
    Have downloaded all the drivers available from Toshiba support, but still cannot get the speed of 100Mbit connection. I guess it's an another downgrade of the bios needed to support the XP operating system?

    Hello

    Your laptop supports Ethernet 10/100 Base-TX.
    This means that the network card supports the standard of 10 Mbps and 100 Mbps.

    I put t know why you expect at a higher speed, but the 100 Mbps is the maximum value for this chip to Base - TX LAN Realtek 10/100

    Welcome them

  • Satellite L850-18 t has problems to connect to new wireless router

    Hello

    I have a serious question that, at the present time, he cannot know. Basically 2 days ago I bought a new router because the other more old has stopped working. And I bought Tenda router. Since that day I have problems connecting with my Toshiba Satellite L850-18 t - I have never had similar problems before.

    I put the security of the router for wpa - psk with aes encriptación mode option. The laptop connected and worked fine, but the next day, he has not suddenly connect more. So I went to check the option, everything was allright. Troubleshooting gave me the following error: "problem with wireless adapter or access point. I tried to reboot wlan driver, but nothing happened. The only thing that seems to help is to change the security WPA2-PSK mode (or vice versa), restart my laptop and it connects then.

    Anyone have some clue what happens? It must be something with my laptop settings, because all other devices (another computer toshiba laptop but older, a PC and android devices) work perfectly.

    Among the specifics on laptop:
    -Computer laptop Toshiba Satellite L850-18 t
    -Network cards:
    -AR9485WB-EG atheros wireless network adapter
    -Realtek PCIe GBE Family Controller
    -Router: Tenda

    Thank you!

    Posted by luka_10
    Hello

    I have a serious question that, at the present time, he cannot know. Basically 2 days ago I bought a new router because the other more old has stopped working. And I bought Tenda router. Since that day I have problems connecting with my Toshiba Satellite L850-18 t - I have never had similar problems before.

    I put the security of the router for wpa - psk with aes encriptación mode option. The laptop connected and worked fine, but the next day, he has not suddenly connect more. So I went to check the option, everything was allright. Troubleshooting gave me the following error: "problem with wireless adapter or access point. I tried to reboot wlan driver, but nothing happened. The only thing that seems to help is to change the security WPA2-PSK mode (or vice versa), restart my laptop and it connects then.

    Anyone have some clue what happens? It must be something with my laptop settings, because all other devices (another computer toshiba laptop but older, a PC and android devices) work perfectly.

    Among the specifics on laptop:
    -Computer laptop Toshiba Satellite L850-18 t
    -Network cards:
    -AR9485WB-EG atheros wireless network adapter
    -Realtek PCIe GBE Family Controller
    -Router: Tenda

    Thank you!

    What I see is that we have same wireless Chipset, Tenda use Ralink or Broadcom chipsets, which are compatible with our wifi cards, then I would tell you my opinion do 1st updated drivers on your laptop, I use the latest x 64 win10, atheros version drivers 10.0.0.326, then go and upgrade your routers firmware! I don't know it will solve your problem, by the way check firmware of the laptop is the last 6,80 I think!

  • What should I do if the wireless radio does not work and cannot connect to the wireless router?

    What should I do if, during the installation of my c309a Photosmart Premium printer all in one, which I am trying to install a wireless connection, I get an error message that the wireless radio is not working?

    Solved by turning the radio off and then on new wireless.

  • Satellite Pro L300 will not connect to Wifi after hibernation

    Hello

    can someone there help me please?
    I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

    The only way to do it is to restart the pc.

    Any suggestions?

    Hello!

    I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

    In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
    http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In addition, you run the factory settings or you have installed a different version of Windows?

    Good bye

  • My new Satellite Pro L300 will not work

    I bought a new Toshiba Satellite Pro L300 on eBay. I connected all the cables according to the installation guide. At first he asked my details, then I logged in and it went to a pages where he says he was preparing. Then I was sent to the newspaper in the section, and the same page appeared saying that he was preparing.

    After what happens about 5 times, he went to a black screen where the only thing I could see was my mouse cursor.

    I closed and restarted, I tried to go into the settings using F12. I was not able to work at all, no matter what I do.
    Unfortunately, I don't have a CD of the OS, but it was announced as having Vista as OS and have Microsoft Office Suite on him as a built-in wireless modem, so it was supposed to be ready just to turn it on. Well I can't even turn it on.

    What should I do? How should I do?

    At first, I must say that F12 has nothing to do with all the settings.
    At this point, I recommend using the new operating system installation using the HDD recovery procedure.
    How to proceed as a result of this document, you can find > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

    When the OS is installed and started up properly first thing you need to do is to create the disc of recovery facilities. "You can do it using preinstalled" Toshiba Recovery Disc Creator. The shortcut is placed on the desktop.

  • Satellite Pro L300 - installation of Linux RHES4 cannot find HARD drive

    Hello

    I have a Toshiba Satellite Pro L300 and it comes with preinstalled Vista, I loaded the XP due to the fact that I was going to see if I could load linux Redhat Enterprise 4 and dualboot both operating systems at the same time but discovered this "DOUBLE BOOT" means that you can have 2 operating systems but can only bott one or the other...

    Anyway, my problem is that I want to just install Redhat Enterprise 4 linux on my laptop, but when it comes to partition the hard drive I get an error message saying "cannot find the hard drive to create file systems" then click OK and restart.

    Any ideas people?

    Chris.

    Hello

    I m not a Linux expert, but I think that the reason is missing SATA drivers.
    Normally, on each notebook with SATA HDD, you need SATA drivers to recognize the HARD drive before installing OS.
    If you install Windows XP or Vista, you need storage for this Manager. The drivers can be loaded with an external floppy drive.
    But I put t know how it works on Linux

    An alternative you can change in the mode of AHCI Compatible HARD disk BIOS. Then, you don't need drivers and your disk should be recognized correctly.

    Otherwise, I recommend this thread: http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14

    Welcome them

  • Satellite Pro L300-156 - WLAN connection drops every 12 hours

    Hello!

    I have a short model "Toshiba Satellite Pro L300-156" (PSLB1E).

    The system state is:

    I used the recovery CD (to install Windows XP and other software on this CD).
    I've upgraded to the latest version of the BIOS (1.50, 10/07/2008) for my laptop and I downloaded all updates for Windows XP.
    I installed the latest WLAN driver for my WIFI (Realtek RTL8187B) card.

    The problem is still there:
    Every 12 hours (exactly on the minute!) drops connections.
    Not only the Internet, but the local connection.
    It is even a kind of matrices.

    Both a connection to a local computer and "mIRC" (ssh/telnet-program) to "PuTTY" (program-chat-IRC) says "network error caused abortion of software".

    These ping connections not, they die instantly in a tenth of a second.

    Hello

    I guess it can be caused by a 3rd third party tool that was installed on your laptop.

    I mean it of really strange that disconnected EXCATLY after 12 hours of use.

    "I have goggled a bit for the message: network error: Software caused connection abort."
    And found that this error is displayed if the Windows network code decides that your network connection is dead. This will happen when you remove the cable network Ethernet-connected computer, or if Windows has any other reason to believe the entire network has become unreachable.

    I think you should check the settings of your WLan router. My router refresh / disconnects after 23,59 hours to ensure that the IP address has changed.

Maybe you are looking for

  • Ram disk cache is not all temporary files

    I use xubuntu and want Firefox to use a virtual disk cache. My settings are: Browser.cache.Disk.parent_directory - string - / media/ramdiskBrowser.cache.Disk.Enable - falseBrowser.cache.Memory.Enable - true When I restart firefox I see a new cache2 f

  • Why "combine" the stop buttons reload? HOW to bring back a separate charging button?

    I'm so tired of companies assuming that I want something in a certain way. My reload button disappears and is only visible when I go to customization. Why the hell would I want to stop and reload to be combined? I can't reload whatever it either when

  • HP 840 G1: update the BIOS

    Have a HP 840 G1 about a year - provided with Windows 7 preinstalled. Upgrade to Windows 10 in early January and had a number of problems (instability, no sound, etc). Did a clean recovery, re-installing Windows 10 using the Windows Recovery feature

  • can I connect my computer dell laptop to my xbox 360?

    How to connect my computer dell laptop to my xbox 360?

  • Code 800F0816 when installing Service pack 1 in Windows Vista

    I had an 0146 error code, I replaced the hard drive and installed Vista from a DVD of resettlement. So far, all of the updates has loaded fine. When it comes time to download and install service pack 1, it ok until the end it says that is is unable t