Satellite Pro L300-152: deleted folder - but need Recovery DVD reocvery

Similar Questions

• Satellite Pro L300-152 - unable to connect to TV, projector or a external monitor

  Hello
  Peuvent some please help?

  I bought a Satellite Pro L300-152, model without PSLB1E-01R015EN with Vista 32 bit a few months ago to replace an old Toshiba laptop not.

  The problem I have is that I can't connect external devices such as TV, projector, or a monitor.
  I used another laptop in the past with my TV and projector and have had no problems at all. I connected via the VGA port, as it is the only port with the exception of USB. Using a VGA cable, I tried all the settings that I have used in the past, but with no joy.
  I did the setting in the display settings and the FN + F5, but nothing comes up on the external screens except no signal.

  I tried to solve this problem for months and need help, please.

  Thank you
  Karl

  > When I try to update the bios driver I get a message: insydeflash the virsion or ROM file is not newer than the version of the BIOS?

  Strange what s... what version of BIOS is installed on your laptop?
  As much as I know at this time the European Toshiba page provides the version of 1, 50 - WIN update of the BIOS for this model of laptop.

• Upgrade CPU of my Satellite Pro L300-152

  Hello

  my laptop is a:

  Toshiba Satellite Pro L300-152
  Model no. PSLB1E-01R015EN
  Celeron 560 2.13 GHz

  Can someone tell me what CPU I can pass safely, I use it in a cool environment and care about a few 100 mhz more of her.

  Thank you for your support

  Before you start to discuss CPU upgrade, check it please this Toshiba document - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  My personal opinion is that upgrading the CPU won't help much and you will not realize a difference in performance for laptop. In my opinion need more RAM or SSD better and faster. This better and better performance some CPU with 100 mhz dating more than one.

• Satellite Pro L300-152 lose the power connector - how to disassemble it?

  I have a Satellite Pro L300 - 152 unit, which is out of warranty.
  I have a bad power connector, it has been pushed back and be dislodged from his seat or brocken cradel is within the computer.

  I am trying to remove the back to see if the power connector can be repaired or remains in its cradle.
  I removed all the screws and all devices, but can not get it off the computer.

  There seems to be something with the keyboard, which I took.

  Can you help me?

  To fix the power connector the whole notebook must be disassembled and you must have access to the motherboard. Disassembly procedure is not complicated if you have maintenance manuals and instructions.
  To have full access to the motherboard, you must remove all the screws from the underside and also all the screws under the keyboard. You will then be able to separate the notebooks and disassemble the upper.

  Tell me exactly what you have removed so far?

• Satellite Pro L300 upgraded to Win8 but I would like to update the drivers

  I have upgraded to Windows 8, but I found the Wifi adapter needs to be reset frequently (it seems to be without a cause) - Troubleshooting Windows 8 solves it by resetting the adapter, but I thought there will be a fix for this?

  When I tried to update the drivers I found that the L300 is not (in the not extensible or expandable lists)-is the L300 compatible in this respect by another model? Or can you suggest how to update all the drivers of Toshiba for this model.

  Thank you

  Your Satellite Pro is the model of laptop old enough and not supported for Win8.
  It is difficult to find drivers for the notebook not supported models and old.

  Problem is that if you make the decision to do so anyway you are on your own and can be all just lucky if everything works properly.
  > is the L300 compatible in this respect by another model?
  It is not easy to give you the right answer. What needs to be done is to compare each hardware component important as chipset, GPU, chip sound, LAN/WLAN with other models and see if some Win8 drivers are available. It is not so easy.

  For example: Toshiba Satellite pro L300 offers 4 different hardware platforms. One you have? What is the model number of your machine?

• Satellite Pro L300-software-service says I need update graphic driver

  I downloaded the software http://designbyme.lego.com/en-us/default.aspx DesignByMe

  The installation runs without a problem, but when I start the program it restarts again and again. The charge of doesn´t photo entirely, instead of this there are black spots. I have can´t click on anything that either, or near programm. I thought that maybe the installation process has not completed correctly so I downloaded the software again, but the problem is always the same. I m using a new Satellite Pro L300 28w with Windows 7 and Mozilla Firefox 3.6

  I contacted the support of lego and they replied: "probably you need to update your graphics driver. Please contact your customer computer manufacturers website for updated free"

  Is this possible and if so what edo upgrad I need?

  Hello

  I put t know if the update of your display driver can solve this problem, but if the manufacture of the software said that it s worth a try! ;)

  The update is simple enough: first download the latest version here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you have downloaded the latest version, remove the old first. Check the list of software in the control panel and follow the instructions on the screen. I guess you have to do a reboot and after that, you can install the downloaded version.

  Good luck! :)

• Re: Satellite Pro L300 PSLB9E - Win XP WLan need driver

  I have a toshiba Satellite Pro L300 PSLB9E

  It came with Vista, but today I installed windows xp.
  I managed to find all hardware except for the wireless driver drivers.

  Please can someone direct me to the correct drivers?

  Thank you

  Hello

  I think you should test the Realtek WLan driver.
  You can find directly on the Realtek site.

  Test it!

• Re: Satellite Pro L100 - where to get the product recovery DVD

  The DVD of my Toshiba Satellite Pro L 100 product recovery was lost. Can someone tell me how to get (or download) a new copy?
  Thank you very much.
  Bert van Herk

  You can not download the recovery DVDs. But you could ask local ASP or order directly from this place:

  http://backupmedia.Toshiba.EU/landing.aspx

  Have a try.

• Satellite Pro L300 - 152 Driver Update problems.

  Hi, I'm new to all this and just about managed to find my way to this Web site. I bought a Satellite as above new brand of PC World Business yesterday 22/10/08.
  I had horrible problems to install several updates of Windows that I finally had to install one by one with a re-boot after each update 'Important '.

  I took the laptop with Toshiba and now I'm using Tempro I 5 alerts telling me to install updates various...

  _3 updates the firmware and update of face recognition 1. _ I extracted the zip file and run the progs and get a message saying "this firmware is not compatible with the selected drive. Contact the manufacturer of your system for more information on formware updates available for this drive "."

  1 updating bios which finally ran with Windows Help and then gave the message «ROM date is not older than the date of the BIOS...» "whatever that means.

  I just bought a laptop, I didn't volunteer to become a technical wizz.
  It feels like I'm doing a work of Toshiba troubleshooting here, and I don't know what I'm doing. Can someone help me?
  Thanks, Guy

  Hey Buddy

  To be honest I don t understand why you react so panicly

  You have a laptop that has a pre-installed Vista OS.
  The fact is that this OS Vista was preinstalled on your laptop computer and for several days/weeks, Microsoft has published a large number of updates and so Vista downloaded and installed updates. But don t wonder about other updates. From time to time you will receive these patches! This is a common behavior of the OS.

  With regard to the Tempro tool;
  This tool informs you about new drivers available, tools or utilities on the Toshiba page.
  To be honest I wouldn t use it. Usually, it's really not important what and when a pilot a tool was released if your laptop runs without problem. I'm always this recommendation; never change a running system.

  Hope I could make a clarification.

  Good bye

• Satellite Pro L300-152 and the task bar freezing

  Hello

  The taskbar seems to freeze whenever I use my laptop. I try to click on something like the volume and it freezes, I then gives me the option to restart windows Explorer, close windows Explorer, or waiting for the program to respond. Once it has rebooted the icons for volume and Wi - Fi connection disappear from the lower right corner and are not available through any other means.

  There seems to be no consistency to this incident - it happens when programs are running or not, regardless of how many times I use the laptop either hours or minutes, and there is no delay between the taskbar being insensitive (sometimes it doesn't freeze again, sometimes it freezes just after the restart). I did virus, spyware/adware/mallware scans, clean my laptop, and it had made no difference.

  All I have this problem or knows what could be causing it and how it can be stopped? Any suggestions would be welcome thanks

  Kind regards.

  Hello

  Googling around you will find many forums where people write about this problem of gel. It is obviously related to Microsoft and that there must be a few patches.
  I also found the link to a fix that should help you.
  Visit http://support.microsoft.com/kb/932406/en-us and if this can help you.

  Please let us know if this will help.

• Satellite Pro L300 - Mat * one UJ850-S - read only DVD

  My DVD-ram does not read some data and all audio CDs however it plays DVDs. I can't find any solution on the net what could cause this. Does anyone else know?

  Hello

  You mean the CD/DVD drive is not able to read the CD s but the DVDs are readable?
  Hmm, my first is a hardware malfunction, maybe the player's laser lens can not calibrate correctly in the right position?  :| who knows

  But before you would contact the authorized service provider in your country for a reader of CD/DVD check I recommend you delete entirely the Upperfilters and Lowerfilters from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  In addition, you can check if an update of the firmware of this player is available on the European driver Toshiba page. If there is on firmware supported, then run an update.

• Recovery creator disc error code: 1100 8-48-00000002. Satellite Pro L300-15

  Hi all.

  Satellite Pro L300-152 of the Vista 32 SP2.

  This laptop was gave me to try to repair (another instance of stolen suicide Vista).
  After retrieving the system (no re - install wasn't necessary), I would like to create a disc of recovery for the owner.

  However, when I try to run the "Toshiba Recovery Disk Creator", I get an 'Error' window with the following message is displayed "an unexpected error has occurred. Exit this application and start it again. (Error code: 1100 00000002-48-8). Of course restarting the application generates another identical message.
  No one knows what could be the cause of this error and how do I create a recovery for this notebook drive.

  Take care of all.

  Mike

  Hello

  This error message usually appears because the non compatible CD or DVD.
  I think you should first check if there is an ODD firmware update.
  On the Toshiba European page driver you might find updates firmware for different CD/DVD drives.

  You should check your CD/DVD drive and a compatible firmware is available, then you need to update this
  If there is no update firmware, then you must try different discs from different manufacturers to create a recovery disk.

• Will XP work very well on a Vista Satellite Pro L300-153

  Hello

  I'll buy the Toshiba Satellite Pro L300-153 vista laptop, but I intend to use XP on it.
  If I destroy the entire vista and install XP, then use all of the drivers listed on this site for XP, my system would work fine with XP but it's a computer vista laptop?

  I don't see a reason why it should not work well. If Toshiba offers the drivers for this model of laptop, it must be tested.

  For the installation of Windows XP Home edition, I recommend using Windows XP SP2 home edition.
  Do not vorget to create DVDs of recovery before you remove the Vista system.

• Satellite Pro L300 - does not start form DVD

  Problem: my Satellite Pro L300 will not start no optical drive (DVD)

  Leisure problem scenario:

  Insert the DVD Toshiba recovery in optical disc drive,
  Restart and during the boot prompt, press F12 and select the optical drive.
  Black screen and the cursor flashes in the upper left corner... after the seconds flew L300 starts to beep loudly. No message on the screen.

  Reports of BIOS version 1.50 while the latest version of the BIOS update on the web is to 1.40...

  Model No.: PSLB1E-02200GG3
  Serial 78685377Q

  I'm doing this because I want to change the OS from Vista to XP.

  Hello

  Stand by. You mean you are using a Toshiba original WXP for Satellite Pro L300 recovery CD/DVD or what?

  Have you tested with any other CD bootable (Linux)?

• Satellite Pro L300-291 - Ok on AC, but fails on DC

  Does not work on DC. Battery is good appearently (both Win7 and HMONITOR reported as 100% - said HMONITOR there 17% wear, which is consistent with the age) works OK on AC, but do not start or run on DC and 'die' if connector ca pulled.

  Win7 detects if the battery is removed and he is happy when he is handed over.
  Panel lights are compatible with a battery in good condition - without blinking.

  This happened after that I put fully powered - off normally let it sleep.

  Satellite Pro L300-291

  Rgds George

  Hello

  In your case, I recommend to check and test the laptop with a new job, good and tested battery.
  It is similar to a dysfunction of the accumulator

  But of course, it's just a suggestions and I think here in the forum person wouldn't be able to tell exactly what s wrong