Satellite Pro L300-152 lose the power connector - how to disassemble it?

Similar Questions

• Satellite Pro L300 - use of the power cable between the countries

  I'm buying a Toshiba laptop Satellite Pro L300 T4200 everything here in New Zealand, where I will be staying for the next six months. However, I'm heading back to Alaska (United States) in April.

  Someone could answer my concerns about the use of power cables and to buy once back in the States. for the most part is it safe to use a USA power cable in this laptop bought NZ without breaking something to bits?

  THX, kim3300

  When you return to the States, I think that you must travel kit adapter power supply only.
  I recommend you consult your dealer and gathering information that it will be the best for you.

• Satellite Pro L300-152 and the task bar freezing

  Hello

  The taskbar seems to freeze whenever I use my laptop. I try to click on something like the volume and it freezes, I then gives me the option to restart windows Explorer, close windows Explorer, or waiting for the program to respond. Once it has rebooted the icons for volume and Wi - Fi connection disappear from the lower right corner and are not available through any other means.

  There seems to be no consistency to this incident - it happens when programs are running or not, regardless of how many times I use the laptop either hours or minutes, and there is no delay between the taskbar being insensitive (sometimes it doesn't freeze again, sometimes it freezes just after the restart). I did virus, spyware/adware/mallware scans, clean my laptop, and it had made no difference.

  All I have this problem or knows what could be causing it and how it can be stopped? Any suggestions would be welcome thanks

  Kind regards.

  Hello

  Googling around you will find many forums where people write about this problem of gel. It is obviously related to Microsoft and that there must be a few patches.
  I also found the link to a fix that should help you.
  Visit http://support.microsoft.com/kb/932406/en-us and if this can help you.

  Please let us know if this will help.

• Upgrade CPU of my Satellite Pro L300-152

  Hello

  my laptop is a:

  Toshiba Satellite Pro L300-152
  Model no. PSLB1E-01R015EN
  Celeron 560 2.13 GHz

  Can someone tell me what CPU I can pass safely, I use it in a cool environment and care about a few 100 mhz more of her.

  Thank you for your support

  Before you start to discuss CPU upgrade, check it please this Toshiba document - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  My personal opinion is that upgrading the CPU won't help much and you will not realize a difference in performance for laptop. In my opinion need more RAM or SSD better and faster. This better and better performance some CPU with 100 mhz dating more than one.

• Satellite Pro L300-152 - unable to connect to TV, projector or a external monitor

  Hello
  Peuvent some please help?

  I bought a Satellite Pro L300-152, model without PSLB1E-01R015EN with Vista 32 bit a few months ago to replace an old Toshiba laptop not.

  The problem I have is that I can't connect external devices such as TV, projector, or a monitor.
  I used another laptop in the past with my TV and projector and have had no problems at all. I connected via the VGA port, as it is the only port with the exception of USB. Using a VGA cable, I tried all the settings that I have used in the past, but with no joy.
  I did the setting in the display settings and the FN + F5, but nothing comes up on the external screens except no signal.

  I tried to solve this problem for months and need help, please.

  Thank you
  Karl

  > When I try to update the bios driver I get a message: insydeflash the virsion or ROM file is not newer than the version of the BIOS?

  Strange what s... what version of BIOS is installed on your laptop?
  As much as I know at this time the European Toshiba page provides the version of 1, 50 - WIN update of the BIOS for this model of laptop.

• Satellite Pro L500 - stops when the power cord removed

  Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

  Someone please help. I have not installed anything new.

  Hey,.

  For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

  I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite Pro L300 - cannot use the 4 GB memory full

  My laptop is Toshiba Satellite Pro L300 model: PSLBDE-003005AR

  I upgrade my memory to 4 GB using 2x2gb PC2-5300 667 Mhz memory. When I installed the memory and I turn on my laptop the installation always pop up. When I removed the 2 GB of memory to do only 2 GB I spend on my laptop and it works.

  I am using windows Vista premium 32-bit edition. I wonder why I do not work with 4 GB of memory. I installed the memory correctly, but it does not work to 4 GB.

  > Laptop is a Satellite Pro L300 PSLB1A - 01 L 019. Lists of the Toshiba Site the maximum memory 2 GB spec however sheets provided with the laptop shows a maximum of 4 GB of RAM.

  This chipset uses this device?
  There are different L300 with different chipsets and different hardware components.
  Some L300 would be able to support 4 GB and some are limited to 2 GB of RAM.

  So if Toshiba says 2 GB are max so it's good and you will not be able to use 4 GB of RAM.

  Welcome them

• Satellite Pro L20 - overheating of the power cable

  Hello

  For several months, I had problems with the keys suddenly works intermittently. Although brushing under the keys with a toothbrush relieved the problem for awhile it obviously was not the main cause. Each time, so not attributable to each of the keys of damaged to different keys.

  When unplugging the power cable from the metal part is very hot, and I worked on the problem of keys occurs only when the computer is running on a/c AND the battery is fully charged. In other words, no problem on the battery or recharging. The adapter is also hot, but guess that's 'normal '.

  The power cable has been tested directly from another outlet and not ongoing execution of the usual belkin surge protector, external sources seem so plotted on. I tried to find another cable/adapter to test but living very rural location of doubt this will be possible or practical.

  The fan seems to work OK, the air coming out of the side is very hot. It does not appear to be clogged with dust. Also, the area of the laptop above the fan heats up.

  Sometimes the computer crashes on black or blue screen (on iplayer lately, maybe other progs too) but the noise continues. I turned off by pressing the button for 5 seconds, but he still works for a while. I guess from overheating. But not some of it is always on a/c-do not charge, it may be on a/c-charge as well.

  Sometimes the computer seems confused if he is re-load, on a/c or battery. At least the icon switches and requires a session to unplug the device before doing things.

  Other times it is the machine of Angel since last two years! It's a Satellite Pro L20, the adapter's clover LiteOn 65W, 19V 3. 42 a. part PA3396E-1ACA (what I see is no longer available).

  Searched through but not found any similar problem, but hope someone can advise me what to do next!
  Thanks in advance

  Hello Robin

  It doesn't sound good. According to the specifications of the laptop, you have the right AC adapter. In my opinion you should contact the partner of service authorized in your country. Make a call and I hope they can help you how to handle this issue.

  It is also possible that they can send you new power adapter. Make a call and explain the situation. If you have need for addresses and phone numbers you can find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good luck!

• Problem WiFi on Satellite Pro C660-2TQ - lose the internet connection

  Hey people,

  hope you could help me. I did a new clean install of Win7 (32 bit) on my Toshiba Sat, C660-2TQ.

  His job very well, except one thing:
  the adapter Realtek RTL8188CE-in my laptop is just terrible...

  I installed the latest driver for this Home Premium wifi, but I lose the conn. to the internet all the time.
  While I have to disconnect in the bottom right corner my laptop and connect again manually.
  I have to do this every minute or so and its very annoying.

  I saw read several discussions about the problems with this specific wifi adapter, but no solution has helped me...

  I didn't install all the listed drivers (34 available for me) but then what I Normand to update my BIOS or would it be a driver as the driver for the touchpad is necessary to get my wifi working properly?

  Hope you guys could help me...

  honestly desperate

  cordially :)

  Hello

  WiFi disconnection problems have different causes and its not easy to say why it happens.
  So, you will need to check each step and each option.

  First of all, you will get the latest version of the driver for this adapter WLan on the Realtek driver page:
  [Download driver Realtek RTL8188CE | http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]

  Would recommend that you do not install this driver.
  Before you begin with the installation, uninstall the previous driver.

  Secondly: it would be possible that this issue isn't related WLan driver and update the driver wouldn't help you much. In this case you should check the other parameters.
  I recommend you to check the router settings and test different standards WLan (802.11 B / G or N).

  In many cases, the problems of compatibility between the router and wireless network card could lead to similar to your question.
  Of course, you should also go to Device Manager-> card WLan-> properties-> Advanced tab
  and must check if you can switch between the WLan standards singles (802.11 B / G or N)
  Power management also in tab (last tab) you must unselect the option to turn off the device to save power.

• SL410: lose the power connector (and unidentified metal part)

  Problem: connecting the power supply is unreliable - connector often need to be shaken to get the battery to charge. I bought a new DC-IN connector, but then as I disassemble the machine to get to the level of the connector a small piece of plastic (approximately rectangular, black on one side, brass on the other) fell. I finally got enough to remove the old connector and install a new one, but it just keeps slipping into the device. Am I right in suspecting that the piece of plastic that is brouilla could have the "rear wall" of the connector DC-IN housing, intended to stop the connector sliding back - and if so, how can I attach this piece? -a small drop of cement used for ABS plumbing parts? (Another part that fell is a small more or less oval silver color metal piece with a round brass threaded piece female at right angles with the silver part.) No idea where in the machine, he came.)

  I recently did a take on a SL510 which was loose.

  Used a blob of JB quick weld turned down. Make sure the metal plate

  which helps to hold a jack.

  The other part looks like a "screw mounting insert" probably from the top?

  Somewhere, you should have a screw that does not connect to something

  When it is inserted. Find where it goes and set the insert with JB or super glue may.

  and do not overtighten when replacing.

• Satellite Pro A200 freeze, including the power button

  Had a complete system freeze last night - first tabs of Firefox, then, when I tried to call the Manager of tasks, CTRL + ALT + DELETE does not either. I pressed the off button several times, but couldn't turn off the laptop.

  After disconnecting the power cable, the power led is stayed blue and he was always running on battery, even if the battery led was off. I left the laptop (what can I do) until the battery has been emptied and it closes.

  This morning, it came normally, followed by this error message:

  "the exception unknown software exception (0x0eedfade) occurred at the location 0x7c812a5b.

  Followed by a screen of windows update updates have been made and the computer will restart soon (just in case where which can be connected - the night before, the symbol of "updates available" was in the shortcut bar too, and when it froze, I ran my virus check Spyware Doctor daily in the background).

  I rebooted the computer without other error messages and it has been fine until now, but I have no idea what caused it, and if it happens again. Any advice?

  > I left the laptop (what can I do) until the battery has been emptied and it closes.
  What else could do you?
  First of all, you could hold the power button for about 4 seconds and it would help tp close Notepad. Then you could reboot the laptop to check if the system is running correctly. However, it seems that it s running again.

  > I rebooted the computer without other error messages and it has been fine until now, but I have no idea what caused it, and if it happens again. Any advice?
  Believe me, it's really not easy to say what caused this problem system and I guess nobody here will be able to answer EXCATLY.
  In my view, there was a software problem that was solved by new reboot and a new update to Vista
  Strange things still occur and are not rare for me.

  Welcome them

• Satellite Pro L300: Option of USB Power on / off mode "sleep"?

  I'm charging a USB device when the laptop is in mode 'sleep'.
  Is this possible? An option in Vista or BIOS?

  Any ideas would be appreciated.

  Thank you

  (Running: L300 Sat Pro, Vista 32-bit)

  Hello

  As I know the USB Sleep & Charge function is not available on the Satellite L300 series!
  Have you checked the user manual?
  Have you found the info USB Sleep & Charge is possible on L300?

  In my opinion it s is not possible!

• HDD upgrade on Satellite Pro M10 - problem with the IDE connector

  Hope someone can help me here.

  I'm trying to adapt a 80 GB HDD to the M10 and I managed to get the Hong Kong HDD caddy, but no matter where I turn, I can not find the right IDE connector.
  If anyone can give me a link to a vendor, I'd be really grateful. I had this project will for about 4 months now and she crawled to a halt.

  Thank you.

  Hello

  I think that this Assembly to support Toshiba HDD (hard drive) (number P000370340) must be compatible for the HARD drive.

  In addition, I think you need something like this:
  

• Satellite Pro L300 - 152 Driver Update problems.

  Hi, I'm new to all this and just about managed to find my way to this Web site. I bought a Satellite as above new brand of PC World Business yesterday 22/10/08.
  I had horrible problems to install several updates of Windows that I finally had to install one by one with a re-boot after each update 'Important '.

  I took the laptop with Toshiba and now I'm using Tempro I 5 alerts telling me to install updates various...

  _3 updates the firmware and update of face recognition 1. _ I extracted the zip file and run the progs and get a message saying "this firmware is not compatible with the selected drive. Contact the manufacturer of your system for more information on formware updates available for this drive "."

  1 updating bios which finally ran with Windows Help and then gave the message «ROM date is not older than the date of the BIOS...» "whatever that means.

  I just bought a laptop, I didn't volunteer to become a technical wizz.
  It feels like I'm doing a work of Toshiba troubleshooting here, and I don't know what I'm doing. Can someone help me?
  Thanks, Guy

  Hey Buddy

  To be honest I don t understand why you react so panicly

  You have a laptop that has a pre-installed Vista OS.
  The fact is that this OS Vista was preinstalled on your laptop computer and for several days/weeks, Microsoft has published a large number of updates and so Vista downloaded and installed updates. But don t wonder about other updates. From time to time you will receive these patches! This is a common behavior of the OS.

  With regard to the Tempro tool;
  This tool informs you about new drivers available, tools or utilities on the Toshiba page.
  To be honest I wouldn t use it. Usually, it's really not important what and when a pilot a tool was released if your laptop runs without problem. I'm always this recommendation; never change a running system.

  Hope I could make a clarification.

  Good bye

• Satellite Pro L300 freezes on the Toshiba homepage

  When he put on then get frozen screen toshiba so impossible to go to safemode etc...

  Can anyone help?

  Hello

  This means that your laptop can not pass the POST (Power On Self Test).

  Self test is a rapid diagnostic test that checks the motherboard and connected devices
  Theoretically, what could cause this problem faulty motherboard, RAM failure, etc.

  In your case, I recommend you remove the RAM modules and check the simple modules.
  You can try to remove only a single module. Check the two modules by using this procedure

  Otherwise, you will need assistance from professional technician that the guy could run tests to find out what part is malfunctioning...