Satellite Pro L300-156 - WLAN connection drops every 12 hours

Hello!

I have a short model "Toshiba Satellite Pro L300-156" (PSLB1E).

The system state is:

I used the recovery CD (to install Windows XP and other software on this CD).
I've upgraded to the latest version of the BIOS (1.50, 10/07/2008) for my laptop and I downloaded all updates for Windows XP.
I installed the latest WLAN driver for my WIFI (Realtek RTL8187B) card.

The problem is still there:
Every 12 hours (exactly on the minute!) drops connections.
Not only the Internet, but the local connection.
It is even a kind of matrices.

Both a connection to a local computer and "mIRC" (ssh/telnet-program) to "PuTTY" (program-chat-IRC) says "network error caused abortion of software".

These ping connections not, they die instantly in a tenth of a second.

Hello

I guess it can be caused by a 3rd third party tool that was installed on your laptop.

I mean it of really strange that disconnected EXCATLY after 12 hours of use.

"I have goggled a bit for the message: network error: Software caused connection abort."
And found that this error is displayed if the Windows network code decides that your network connection is dead. This will happen when you remove the cable network Ethernet-connected computer, or if Windows has any other reason to believe the entire network has become unreachable.

I think you should check the settings of your WLan router. My router refresh / disconnects after 23,59 hours to ensure that the IP address has changed.

Tags: Toshiba

Similar Questions

  • Satellite Pro L300 WiFi continues to drop and doesn't reconnect until you restart

    Hi, I have a Satellite Pro L300, number of model PSLB9E - 00G007EN running windows Vista professional.

    Recently I started trying to connect to my wifi at home instead of using the ethernet cable.

    Research shows my home network and then I connect with the password, everything all right at this stage, sometimes an hour, sometimes for 10 minutes and then the connection disappears. When I try and re-connect it does not find any wifi network, but I have not moved from where I was when I was connected. I have I-phones, etc. and another laptop running windows 8 connected wireless, and there is no problem with any other machine, just my toshiba!

    Sometimes if I turn off the wifi using the switch at the front and then put it again which solves it, but once again only for another 10/20 or 30 minutes. Sometimes even that does not work and I have to restart the machine to find the network! It works, but once again for a limited period until he gave up the connection and it disappears again, back to square one.

    I even tried to take this work and connect to the wi - fi, but still exactly the same thing happens, so I think I can rule out problems with my home network / router.

    I'm not very good with computers, but have managed to check if the driver is up-to-date, etc., and all appear here... Help, please!

    Post edited by: ANDY2807

    I think that the wireless is the following: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapter

    The driver version is: 6.1162.610.2009

    My Windows Vista Business 64-bit is by the way

    > I think that the wireless is the following: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapter
    Yes, you are right, the laptop seems to be equipped with the Realtek RTL8187B WLan card.
    This wireless network card supports 802.11 B and G standard.

    First update the WLan driver.
    Here you can find the latest WLan drivers available on the Realtek page:
    [Driver Realtek RTL8187 WLan: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=40&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]

    This driver is for Win XP / Vista / Win 7

    In the event that the issue will not be resolved, go to the Device Manager.
    Choose the WLan card-> properties and go to the Advanced tab
    Here, choose either the 802 standard. 11 B or G. This setting depends on the settings of your router. If your router supports 802. 11 G, you must choose G

  • Satellite Pro L300 will not connect to Wifi after hibernation

    Hello

    can someone there help me please?
    I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

    The only way to do it is to restart the pc.

    Any suggestions?

    Hello!

    I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

    In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
    http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In addition, you run the factory settings or you have installed a different version of Windows?

    Good bye

  • Satellite Pro L300-1FL - WLAN network adapter does not exist

    Model: Satellite Pro L300-1FL (PSLB9E)
    Operating system: XP Pro SP2
    Wireless card: PA3616u-1mpc (atheros AR5007)

    the laptop came with pre-installed vista, everything worked very well (including wireless), although a little slowly, but decided to downgrade to xp. integrated SATA drivers into my xp with nlite installation disc. XP installed fine. visited the toshiba support site and downloaded all the drivers for xp and install.

    Despite the installation of the wireless driver there is still no present in the wireless network card device driver. It is an "unknown" device listed, which I think is the wireless card.

    at first I was not sure what card appeared so systematically installed that all options of wlan of the toshiba download page [intel/atheros/realtek], none has worked. little more digging autour and discovery was a then reinstalled atheros atheros wlan client on the toshiba site. still did not work. found a update atheros ar5007 driver installed, still no joy.

    forward wireless switch is on [the orange light] and has been throughout the process. have you tried enabling / disabling fn + F8, which doesn't do anything.

    I think I read somewhere (having read much too many post on this over the last few days!) that update the BIOS to version 2.4 can solve the problem. However the version offered for my model by the toshiba page BIOS update is 2.1 (which I've updated when you install all drivers in xp) and I'm not that eager to update the BIOS to a version that is not supported by toshiba, because I have no idea how fix an incorrect BIOS prevents starting the computer.

    When you look at the BIOS option "wake we wireless" is grayed out and not selectable. There is no other network without wire/related parameters. This might infer that the BIOS does not recognize the card wireless for some reason any. whereas he should have before, I started to lose its time, as worked it fine under vista wireless. so I think that upgrading the BIOS might have broken, although I can't be sure that I've updated the BIOS until I realize that the without wire did not work under XP, so it could have been broken before the BIOS update. Does this sound plausible? also, I have no idea how if is take to solve this - you can downgrade the BIOS?

    any help greatly appreciated - have been pulling on my hair for 2 days now and there is only so much googling, you can do before find yourself you constantly re - visiting the same sites over and over again!

    Thank you

    ~ andy

    worried that he may have been conflict for different drivers wlan I had initially installed, so have done a complete re - format and re-installation of xp. Install the drivers, including the wlan driver atheros. but still no adapter wlan in Device Manager.

    the unknown device in the other section of the Device Manager is listed as an ethernet controller; However glancing upward from the PCI/VEN # (C & DEV_001C 168) on the basis of data from the provider PCI identifies that this is indeed the atheros card.

    This means that it is not a hardware/BIOS problem as I previously suspected. XP can 'see' the device, but for some reason, the driver won't work. Hmm

    someone at - it had a similar problem? is it just a matter of finding the "correct" driver

    Thank you

    ~ a

  • Satellite Pro L300-1CZ - WLAN disappeared after reboot

    Realtek RTL8187B 802. 11b / g 54Mbps USB 2.0 disapperd after restart and material unknown adapter USB2.0 come after the reboot of Vista SP1.
    Today, a day after Realtek RTL8187 come back again after the reboot. I didn't work yesterday after the restart from there.

    Edit: The book is a Satellite Pro L300-1CZ

    Kind regards
    Christer

    Hello Christer

    Sorry, but it is not easy to understand what you are writing about. Reboots, go... hmmm.
    You have installed some Microsoft updates or done something that may be responsible for this strange question?

    Have you tried to restore OS hour earlier before it started?

  • Re: Satellite Pro A300-1EA - wireless connection, drop all the time

    Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.

    It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.

    There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.

    I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 12.2.0.11.3 drivers from the Toshiba download page.

    Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.

    Laptop will be thrown against a wall soon if no one can help you.

    Thanks in advance.

    Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.

    Post edited by: mjbcrawf

    Hello

    Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.

    In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].

    If you have any other questions, please let us know!

  • Satellite Pro M40 - no WLan connection - driver missing?

    I recently reinstalled Windows XP on my Satellite Pro M40, which eliminated all drivers for WIFI etc.

    I tried write the drivers on the toshiba site on drive on this PC and then install on the other PC, but still have no connectivity...

    Any ideas?

    Stand by.
    Some unknown device is listed in Device Manager?

    I'm not 100% sure but I think your M40 Atheros WLAN card inside. Please visit http://aps2.toshiba-tro.de/wlan/?page=downloads and try to download and install WXP driver Atheros WLAN Card.

  • Satellite Pro L10 and WLAN connection

    One of my clients claims that the wireless connection is not displayed in fact at all and he now believes that there is no wireless connection.

    The L10 was problems with does not appear before wireless connection?

    And if so is it possible to fix it.

    Hi Graham

    It will be interesting to know what model of Satellite has your customer (L10 - xxx). It is possible that the device has no wireless network card onboard. Please check the underside of the laptop. Usually, there must be a small label WLAN.

    If the device has a wireless network card which should also be listed in the device under network adapters Manager.

    Good bye

  • Satellite Pro L300 does not connect to the internet using a broadband

    Hello!!

    I reformat my laptop with Windows 7 a few days ago.
    When I tried to use a broadband internet connection, it won't work.

    Pls help me on this.
    Thank you.

    Hello

    I assume you are talking about WLan.
    You have installed Win 7 as a new OS.
    Have you installed good WLan driver?
    The WLan card is recognized in Device Manager?

    If so, have you turned on the wireless network adapter by using a switch in front of the laptop, and FN + F8?

    LAN working properly?

  • Satellite Pro L300-1 b 9 cannot connect to my wireless router

    Hello!

    I activated the nw wireless on SAT L300 PRO 1 b 9 - but with a lot of struggle...
    First I had to find the switch to turn on (I never got :-)).
    Then I had to uninstall Atheros Windows and set flags on (activate) in the Windows driver.

    But in Linux and Windows, I couldn't connect to my wireless router.
    My luck was that some of my neighbors have a wireless network security-disabled, open, I could map to test.
    The test was succecfully with this network, but my wireless router was inaccessible.
    The other machine I could reach it.

    The result was:
    If I set the router to broadcast the SSID, the two OSs (Ubuntu + Windows) can use the wireless network.

    But if I turn off the broadcast (to protect my router), the network driver is unable to use my router, it does not matter I set the SSID...

    A router is WRT54G, and he works with other computers if I hide the SSID, but as Satellite Pro L300 unable to connect (with this option).

    Someone knows why? What should I do to I could hide the SSID to the bad guys?

    Thanks for any help!

    With regard to:
    DD

    I put t know what Windows operating system you use, but if you use original Vista, I think that, good WLAN driver is part of the package. For the wireless network adapter must be properly installed.

    It is not easy to say what the problem is here, but if the laptop can see and detect your WLAN network side laptop computer s everything should be OK. Try to reboot your router and check all the settings.

    In my opinion, there is a problem with the WLAN settings.

  • Satellite Pro L300 - may not always connect to the same strong connection router

    I currently have a Satellite Pro L300-155. At work, the WIFI signal is strong everywhere where I am in the building because we have 2 WIFI connections. However, I can connect okay in 1 room but if I just go in the other room, I'm unable to connect - and the connection is still strong. This also happens intermittently at home.
    Is it of diagnostics that I can run on the Toshiba to test wifi?

    Where can I find what chip it is? Where is the wifi location - on a motherboard, etc?
    Can it be replaced and where I could quote from?

    Thanks in advance

    Hi cooky44,

    In my opinion, you should update the routers firmware and update your WLAN driver.

    Furthermore, I have created an interesting document on improvements to WLAN connection:
    [WiFi: improved reliability of connections | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=68]

    Also check the forum similar topics WLAN.

  • Suddenly disappeared WLan device - Satellite Pro L300 Manager

    Satellite Pro L300 running on wireless. Recently turned off don't but when restarted there is no wireless connectivity.
    (hardware wireless enabled, [fn] switch F8 enabled) (Until that day in the BIOS)

    There is no device showing in Device Manager wireless.
    The machine has been restored to several previous restore points in the last five days, when the wireless device was present.

    Anyone know why the wireless adapter can suddenly disappear from the Device Manager and how it can be restored?

    > Wireless adapter suddenly disappeared from the Device Manager. How can they be restored?

    You should try to install the wlan driver:

    http://APS2.toshiba-tro.de/WLAN/?page=downloads

  • Satellite Pro L300: Noise of nasty when connected to your hifi installation comments

    Hi, thanks for reading,

    I just bought a Satellite Pro L300, to use for DJing. I use a Behringer USB mixer, and when I plugged it to the top there is a sound really bad comments coming out of my speakers.

    I tested it in the headphone jack output by connecting the laptop directly to my sound system and I hear the same comments.
    I went to check through troubleshooting and audio driver settings, everything seems fine.

    I thought then he might have been a problem to the ground, so disconnected the power to the laptop and it worked, the Larsen effect stopped. I tried to use a different power supply to an old laptop and the noise starts again.

    Is there anyway that I could solve this problem? I need to run food as the custom of the last battery life long enough while I DJ.

    Thanks in advance

    > so thought that it might have been a problem to the ground, so disconnected the power to the laptop and it worked, the Larsen effect stopped
    I agree with you and Akuma appears that this noise is related to the question of land
    In many cases, different people said they could solve this by using a 3 cable and AC adapter power cord.
    These special adapters can be ordered from the authorized service partner.

  • Satellite Pro L300-152 - unable to connect to TV, projector or a external monitor

    Hello
    Peuvent some please help?

    I bought a Satellite Pro L300-152, model without PSLB1E-01R015EN with Vista 32 bit a few months ago to replace an old Toshiba laptop not.

    The problem I have is that I can't connect external devices such as TV, projector, or a monitor.
    I used another laptop in the past with my TV and projector and have had no problems at all. I connected via the VGA port, as it is the only port with the exception of USB. Using a VGA cable, I tried all the settings that I have used in the past, but with no joy.
    I did the setting in the display settings and the FN + F5, but nothing comes up on the external screens except no signal.

    I tried to solve this problem for months and need help, please.

    Thank you
    Karl

    > When I try to update the bios driver I get a message: insydeflash the virsion or ROM file is not newer than the version of the BIOS?

    Strange what s... what version of BIOS is installed on your laptop?
    As much as I know at this time the European Toshiba page provides the version of 1, 50 - WIN update of the BIOS for this model of laptop.

  • Satellite Pro L300-PSLB1E: XP does not control the wifi to the power connection

    * + Hello + *.

    I have a model Satellite Pro L300-PSLB1E and a XP Professional SP3 on it.
    Already everything works because I had a compilation of drivers copy of the past.

    The problem is that XP does not control the WiFi works without danger the and it disconects when I close the lid.

    So I tried with the power that said safety program to:

    Bq. [06/04/08 Power Saver Toshiba Windows XP 7.04.02I | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpwrsav-es-20080519173239.zip] + doesn't work-error 0 x 0 +.
    And I tried also with the thought of program Toshiba wifi on 32-bit compatibility:
    Bq. [Intel PROSet/Wireless Software | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpro-ncs-20080416140552.zip] + doesn't work too-Said controller is not installed when you and full work +.

    So, how to control the peripheral power turn off on?

    Bq. * + thanks for your attention and patient. + *

    Hello

    Firstly the Toshiba Power Saver requires the installation of the common Module.
    The common Module for Win XP v1.00.05 can be downloaded from the European pilot page Toshiba.

    So before installing the energy saver, install common Module, restart the computer, and then try the energy saver.

    In addition the Intel PROSet/Wireless Software can be used only with the Intel Wlan card.
    Is the laptop supports the Intel wireless network adapter?

    AFAIK the L300 series can be equipped with a Realtek, Atheros and Intel Wlan card
    Check it!

Maybe you are looking for

  • Import the external drive, indicates each clip

    When I import media in FCPX from an SD card, I am able to select the appropriate folder that contains my support. After a meeting, the first thing I do is to empty the gross support on an external drive.  If I try to import media for this drive, ever

  • L750-1MW - strange question satellite speakers

    Hello I have a problem with the speakers: all my speakers as time to fade.I realized that this happens when I play games or watch something on youtube. When this happens, if I plug the headphones, it's solid on them, so I think that's not the card so

  • program does not appear even when magnified.

    Whenever I try to run a program (the day before online) the program starts, but behaves as if it is reduced. Whenever I try to restore the program, it seems that the program maximizes, but there is no video display, I'm looking at my office. Someone

  • Windows and Windows.0

    Formatted my HD and now I have two windows on C:\, Windows and Windows.0. Windows.0 resumed in memory space 3 times Windows.Which I use? Who can I safely remove? Any help is welcome.

  • 2540 HP printer all in one: Blue Hp flashing wireless. Do not accept the SSID password

    I have a HP 2540 wireless with a blue light problem flashing. The error message is 'do not accept password' somethhing or similar to that. I restarted the router, printer and pc according to the instructions. I reloaded the latest drivers from the Hp