Satellite Pro L300 create backup disks, TRDC Launcher error window

Similar Questions

• Satellite Pro L300 1AD is unable to install the Windows XP display driver

  I just installed XP on my Satellite pro because my internet modem doesn't work with Vista.

  I went to the main site of Toshiba to install display drivers, but they moved it, it keeps bringing the message "this driver is not for this computer please contact manufacturer.

  I put t understand why because all the other drivers that I downloaded on the same work, it's just the display one page. Does anyone know what's wrong?

  You have downloaded the latest driver for Satellite Pro L300?
  On the Toshiba site it s version 6.14.10.4953.

  An alternative, you can try the drivers from Intel, but normally the Toshiba driver should work.
  I always use the driver from Toshiba and never had any problems.

  Furthermore, I looked on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

• Satellite Pro L300 PSLB1A: Recovery disk doesn't work no-error 0xc000000f

  I get error 0xc000000f on restart and if I try the recovery disk I get error error: 10-FC12-0241
  operating system is vista professional and toshiba laptop L300 PSLB1A - 02S 008

  Hello

  You mean that you cannot start the laptop using the Toshiba Recovery disk you created?

  Go into the BIOS and check if the CD/DVD drive is recognized. It should appear on the first page of the BIOS.
  If the CD/DVD drive is not listed, then you should set the compatible SATA mode and must save the changes.
  After this attempt to boot again from the recovery disc.

  I also searched on the Toshiba driver European page for info and found a few details;

  There is an update of firmware for CD/DVD TS-L633A and TS-L633P player.
  This Firmware solves "sometimes not able to writing on DVD + R media'.
  The problem occurs only on DVD + R media, other media type have no problem.

• Satellite Pro L300 - Player DVD 10 on Vista error code.

  Can not see the DVD drive in 'my computer' in Device Manager its display in car but with yellow triangle, after watching the news, the State of the device is "this device cannot start. (Code 10) "tried to restart 2 times. It's does not.
  Also the drivers cheaked, on my computer and internet, windows is saying there up to date and im running the latest.

  Tried uninstalling the drive and restart which does not happen.
  When instering a disc from the player to move and rotate the disc, so im hoping that this is a technical question and did not need new disc.

  Any help is welcome

  Thank you

  Hi mate

  Don t you worry it seems that it s just a registry problem.
  First of all, remove the CD/DVD drive in Device Manager list.
  Then, go to the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  + HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318} +.

  Details here:
  http://support.Microsoft.com/kb/270008/en-us

  Reboot the laptop.
  Wait that the OS again recognized the CD/DVD drive and check it out.

  Welcome them

• Satellite Pro L300 WiFi continues to drop and doesn't reconnect until you restart

  Hi, I have a Satellite Pro L300, number of model PSLB9E - 00G007EN running windows Vista professional.

  Recently I started trying to connect to my wifi at home instead of using the ethernet cable.

  Research shows my home network and then I connect with the password, everything all right at this stage, sometimes an hour, sometimes for 10 minutes and then the connection disappears. When I try and re-connect it does not find any wifi network, but I have not moved from where I was when I was connected. I have I-phones, etc. and another laptop running windows 8 connected wireless, and there is no problem with any other machine, just my toshiba!

  Sometimes if I turn off the wifi using the switch at the front and then put it again which solves it, but once again only for another 10/20 or 30 minutes. Sometimes even that does not work and I have to restart the machine to find the network! It works, but once again for a limited period until he gave up the connection and it disappears again, back to square one.

  I even tried to take this work and connect to the wi - fi, but still exactly the same thing happens, so I think I can rule out problems with my home network / router.

  I'm not very good with computers, but have managed to check if the driver is up-to-date, etc., and all appear here... Help, please!

  Post edited by: ANDY2807

  I think that the wireless is the following: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapter

  The driver version is: 6.1162.610.2009

  My Windows Vista Business 64-bit is by the way

  > I think that the wireless is the following: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapter
  Yes, you are right, the laptop seems to be equipped with the Realtek RTL8187B WLan card.
  This wireless network card supports 802.11 B and G standard.

  First update the WLan driver.
  Here you can find the latest WLan drivers available on the Realtek page:
  [Driver Realtek RTL8187 WLan: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=40&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]

  This driver is for Win XP / Vista / Win 7

  In the event that the issue will not be resolved, go to the Device Manager.
  Choose the WLan card-> properties and go to the Advanced tab
  Here, choose either the 802 standard. 11 B or G. This setting depends on the settings of your router. If your router supports 802. 11 G, you must choose G

• Creation of recovery disks on a Satellite Pro L300 running XP pro

  Hello

  you want to create a recovery disc for my Satellite Pro L300. Operating manual provides instructions for Vista but the machine comes with XP Pro.

  Can anyone help?

  Can you please send the exact model number? I just want to check the specification.

  Anyway, as far as I know this model was supplied with preinstalled VISTA 32 bit BUSINESS and WXP recovery DVD. You always have this DVD?

  I m not 100% sure, but I think that WXP had no option for recovery disk creator. The whole story started with Vista.

• Failed to retrieve the Satellite Pro L300 laptop using Toshiba Recovery Disk

  I have a Satellite Pro L300 Vista I'm trying recover using the recovery disk Toshiba official that the machine is not able to retrieve from the hard drive.

  The process gets as much as to start recovery utility and asking to select the language in the utility recovery which I emphasize English and then select next; It moves on the next screen, which is empty and then it just hangs.

  Any suggestions?

  You bought your laptop with the Vista version English?
  What language is marked before selecting English?

• Satellite Pro L300: DVD drive eject does not & recognizes not all disks

  Satellite Pro L300 dvd player eject does not and does not recognize the disc that sits in.

  Please help someone,

  Thank you very much.

  What kind of help do you expect?

  You mean he s a software problem?

  I doubt it because it sounds like a mechanical hardware problem and in this case, the disk must be replaced.

  The laptop seems to be is not very old, and I think that the guarantee must be valid
  How about you, communicating with ASP in your country and ask for a replacement WEIRD?

  I think this helps

• Cannot disable my Satellite Pro L300 PSLB9U

  Hello!
  I don't know what happened, maybe it's when I used a type of program registry cleaner: advanced system optimizer, or a virus my pc infected too: Worm/Autoit.AGW or AGX... but now when I want to stop the laptop, nothing happens.
  I made a backup of this registry cleaning and when I restored it, the first time I could shut down windows, but now it no longer works...

  I tried to boot from a dvd with xp sp3 and it reports a problem, maybe a virus or a bad hard drive.

  What can I do?
  and if I have to install xp all still once, where I find drivers Toshiba, utility etc that I need? the laptop is supposed to be new, but it's not come up with any dvd... it's a small store in Mexico City, almost a laptop second hand I think...

  Thanks for your help!

  (came a problem of energy saver utility from toshiba at the same time... now, it seems to be fixed...)

  Satellite Pro L300-PSLB9U-02PRL3
  Microsoft Windows XP Professional 5.1.2600 Service Pack 3

  > I tried to boot from a dvd with xp sp3, and report a problem, maybe a virus or a bad hard drive
  This may be a virus, because the new installation of the OS would erase the entire HARD disk and you'd get a clean OS.
  Maybe it's a hardware problem if it would be a HDD issue then you cannot start the operating system of the s. You would only see an error message that OS has not been found.

  You can check in the BIOS if the HARD drive is recognized, otherwise will need you a new HARD drive.

  > and if I have to install xp all still once, where I find drivers Toshiba, utility etc that I need? the laptop is supposed to be new, but it's not come up with any dvd... it's a small store in Mexico City, almost a laptop second hand I think...
  The new laptops Toshiba are not equipped with recovery DVDs!
  There's a reminder installed on the laptop and it says that you must create a disk recovery first!
  Looks like you've ignored it or didn't check this and now you have any disk :(

  In any case, Toshiba drivers are on the Toshiba page we because I think that it is a Toshiba model we
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

• Satellite Pro L300 - installation of Linux RHES4 cannot find HARD drive

  Hello

  I have a Toshiba Satellite Pro L300 and it comes with preinstalled Vista, I loaded the XP due to the fact that I was going to see if I could load linux Redhat Enterprise 4 and dualboot both operating systems at the same time but discovered this "DOUBLE BOOT" means that you can have 2 operating systems but can only bott one or the other...

  Anyway, my problem is that I want to just install Redhat Enterprise 4 linux on my laptop, but when it comes to partition the hard drive I get an error message saying "cannot find the hard drive to create file systems" then click OK and restart.

  Any ideas people?

  Chris.

  Hello

  I m not a Linux expert, but I think that the reason is missing SATA drivers.
  Normally, on each notebook with SATA HDD, you need SATA drivers to recognize the HARD drive before installing OS.
  If you install Windows XP or Vista, you need storage for this Manager. The drivers can be loaded with an external floppy drive.
  But I put t know how it works on Linux

  An alternative you can change in the mode of AHCI Compatible HARD disk BIOS. Then, you don't need drivers and your disk should be recognized correctly.

  Otherwise, I recommend this thread: http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14

  Welcome them

• Satellite Pro L300 - where to get the recovery DVDs

  Hello

  Can someone help me please.

  My satellite pro L300 laptop has crashed I have repaired.
  Unfortunately, I have no operating system such as Windows Vista recovery disk.

  I can't find how to get these discs on Toshibe website or to be honest, that these disks are correctly as.

  Any help would be appreciated...

  Hello

  The laptop supports recovery of HARD drive option. This means that you can reinstall the image of Toshiba without using the recovery DVD. You must boot up the laptop and press the F8 key. The advanced boot menu is displayed and there you choose the first option to fix my computer. Then choose recovery Toshiba (last option) and start the installation.

  After this installation, you can use the Toshiba pre-installed called TOSHIBA Recovery Disc Creator to create an own recovery DVDs software of engraving

  But if you have formatted the HARD drive, the repair option won't work because the recovery folder has also been removed. In this case, you will not be abele to create clean restore DVD.

  But you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Recovery creator disc error code: 1100 8-48-00000002. Satellite Pro L300-15

  Hi all.

  Satellite Pro L300-152 of the Vista 32 SP2.

  This laptop was gave me to try to repair (another instance of stolen suicide Vista).
  After retrieving the system (no re - install wasn't necessary), I would like to create a disc of recovery for the owner.

  However, when I try to run the "Toshiba Recovery Disk Creator", I get an 'Error' window with the following message is displayed "an unexpected error has occurred. Exit this application and start it again. (Error code: 1100 00000002-48-8). Of course restarting the application generates another identical message.
  No one knows what could be the cause of this error and how do I create a recovery for this notebook drive.

  Take care of all.

  Mike

  Hello

  This error message usually appears because the non compatible CD or DVD.
  I think you should first check if there is an ODD firmware update.
  On the Toshiba European page driver you might find updates firmware for different CD/DVD drives.

  You should check your CD/DVD drive and a compatible firmware is available, then you need to update this
  If there is no update firmware, then you must try different discs from different manufacturers to create a recovery disk.

• Can I install WXO on Satellite Pro L300-22N?

  Hello

  I have a question:

  Can I install win xp pro / Home on Satellite Pro L300-22N? It has Vista Home Premium on it now and I don't like this system, I wonder if it supports win xp.

  Please I need to know the fast awser.

  Concerning
  HFH-Dataservice

  Hello

  Of course, you can install Win XP why you think that you can not install Win XP?
  If the laptop is able to run Vista installation Win XP shouldn't be a problem.

  See European driver of Toshiba.
  You can find some Win XP drivers too

  PS: before install you Win XP, you must create the recovery disk!

  See you soon

• Satellite Pro L300 - CD burning problem

  I recently bought a Satellite Pro L300 laptop and I have problems with the CD's I created.

  Any software I use Nero, Toshiba etc I still get the same problem. The created disc will play on the laptop, but not in my home Hi-Fi, the reader will recognize the disk, how much tracks etc. but does not play. I use discs without brand that worked with my old desktop computer Dell & Sony DVD player.
  I can also not less than 10 x using nero burning speed,

  I use usually 4 x.
  The operating system is Windows XP.
  Anyone got any ideas?

  I put t know what CD/DVD drive you have but on the Toshiba site for some readers are firmware upgrades available. Maybe you should try this to solve the problem.

  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Good luck!

• Satellite Pro L300 - using partition magic

  Hello

  I have a Toshiba Satellite Pro L300 laptop and I would like to make an additional partition next to the C: drive already existing and the hidden partition. I created the recovery discs and I want to use the magic of partition for the partitioning process (no new installation of windows xp). Can someone tell me if using partition magic will have adverse effect on the eventual recovery from disks created?

  Thanks in advance

  Usually you can do with Windows option in disk management, but can you please tell me something first?

  You are using Vista or Windows XP Home edition? I ask this question because if you use Vista preinstalled HARD drive must have already two partitions. Please check in Windows Explorer.

  Hidden partition is described as an EISA (WinRE) partition?