Satellite Pro L300 PSLB1E - black screen / no display

Similar Questions

• Satellite Pro L300 - cursor black screen flashing

  Hi all

  I have a Toshiba laptop Satellite Pro L300 Vista.

  The customer earned him in because when it starts it goes to home Toshiba screen then goes to a black screen with cursor flashing at the top left. I connected external monitor with the same result. Swapped RAM as well.

  Have run Memtest (spent), Seagate HDD long test (past), Ultimate boot CD and Winternals without success.
  * F8 does not work * and no more than the resumption of the plant.

  Can enter the BIOS F2 and F12 no problems and the HARD drive is listed.

  I reinstalled Vista on CD and on reboot it goes back to blinking cursor. I tried booting from the Vista CD repair and system restore. FixBoot commands and FixMbr prompt as well as with the same result.
  I feel that it may be a corrupt CMOS sensor? It's like the OS installs correctly, but the computer loses his memory on reboot where the operating system?

  Is the battery CMOS easily accessible and removable on this model?

  Has anyone experienced these symptoms? Is - fixable at lower cost?

  Hello

  If you have clients, I guess you're a technician and hope you have a few pieces of equipment in your store.
  Have you tried to set the BIOS to default settings and check again?
  If possible try to exchange the HARD drive and test the functionality again.
  You can use laptop with Linux live CD (HARD drive not required)?

  To be honest that I think n problem t is ORGANIC and, in my opinion, the exchange of the CMOS battery is not necessary.

  Please test it with the new HARD drive and post comments.

• Satellite Pro L300-PSLB1E: XP does not control the wifi to the power connection

  * + Hello + *.

  I have a model Satellite Pro L300-PSLB1E and a XP Professional SP3 on it.
  Already everything works because I had a compilation of drivers copy of the past.

  The problem is that XP does not control the WiFi works without danger the and it disconects when I close the lid.

  So I tried with the power that said safety program to:

  Bq. [06/04/08 Power Saver Toshiba Windows XP 7.04.02I | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpwrsav-es-20080519173239.zip] + doesn't work-error 0 x 0 +.
  And I tried also with the thought of program Toshiba wifi on 32-bit compatibility:
  Bq. [Intel PROSet/Wireless Software | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpro-ncs-20080416140552.zip] + doesn't work too-Said controller is not installed when you and full work +.

  So, how to control the peripheral power turn off on?

  Bq. * + thanks for your attention and patient. + *

  Hello

  Firstly the Toshiba Power Saver requires the installation of the common Module.
  The common Module for Win XP v1.00.05 can be downloaded from the European pilot page Toshiba.

  So before installing the energy saver, install common Module, restart the computer, and then try the energy saver.

  In addition the Intel PROSet/Wireless Software can be used only with the Intel Wlan card.
  Is the laptop supports the Intel wireless network adapter?

  AFAIK the L300 series can be equipped with a Realtek, Atheros and Intel Wlan card
  Check it!

• Satellite Pro L300 - 29 c very dark display

  Hello

  The display on my Satellite Pro L300 - 29 c is very, very dark. It's dark, both during POST / in the BIOS and configuration once Windows loads. The brightness of the screen (Fn + F7) is set to the maximum. If I plug in an external display, which works perfectly. I can say that this model is not a physical wheel or something similar that controls the brightness of the screen.

  Should I have a hardware failure? Is this something fixable by the user?

  Thanks in advance.

  I can't say for sure, but I think FL inverter is faulty (backlight) and it should be replaced.
  The FL Inverter control the backlight. It is important that FL Inverter are not too expensive part.
  I take in a Toshiba certified maintainer and ask for help.

• Satellite Pro L300 (PSLB9A) - black of blinks twice every time

  When I start the laptop, the desktop appears before him completely flickers black twice each time. With computer tech friends, we put our finger on it down to be a hardware problem, then the driver but when I go and download intel driver from the Web from Toshiba to display site [here: http://www.mytoshiba.com.au/support/notebooks/satellite/pro/l300/pslb9a-02k002/download#filters]
  but it does not work.

  The laptop is only 4 months old and I am very annoyed at this subject - also call support Toshiba does anyone know of another option?

  Hello

  > The laptop is only 4 months old
  In this case, you must contact an authorized service provider because your laptop should be under warranty and so repair should be free.

  Have but before moving on to an authorized service provider you tried to reinstall the notebook using the Toshiba Recovery disk? If this is not the case, check this please!

  Welcome them

• Satellite Pro L300: How to change the display settings

  Hi I have a toshiba satellite pro l300 run a pentium dual core and intel 965 display chip any games I play on my laptop, they open in a small box and not full screen I've had a quick glance at the settings to try to resolve this with no luck.

  Can someone tell me if there is a way to change the settings to get the games to play in full screen, my current display settings are 1280 x 800 pixels and running at 32-bit color.

  Any help would be appreciated.

  You should set this option to full screen in the games you play. Checked for these options, because you are given something like graphics, solution details and in most cases should be windowed.

  One thing you might try is to uninstall your current display drivers, and then reinstall new ones. Make sure that you use tools like ccleaner cleaning record or similar.
  Check if you have installed all the latest updates of windows and directx version, if you are using Windows XP.

• Satellite Pro L300 1AI LCD screen backlight not working not

  Hi all

  I have a Satellite Pro L300 1AI running Windows Vista the computer starts and works fine but the backlight on the screen doesn't seem to work.

  Y at - it none of the Vista settings that can affect this (other than the Fn key command on the keyboard and settings) in Control Panel? Strangely, it seems to have happened since I installed Skype but I don't see how this could possibly affect it.

  Any help is much appreciated...

  Hello

  What s wrong exactly? Brightness screen laptop s is too low?
  Everything you see on the screen as behind a thick fog?

  Well, usually the FL Inverter control the backlight of the screen and if the FL inverter starts to malfunction, so you would get the problem like this.

  There is no alternative to replace this inverter FL.
  It s a small part behind the frame of the screen I think that it s a job for a technician in ASP.

  Welcome them

• Satellite Pro A120 - LCD black screen - Fine on external monitor - fine

  Hi, I have a headache with a Toshiba Satellite Pro A120 mojor. The screen began to move to the blackout at random times and happens more and more. It is not serious if W
  Jayindows has loaded or if I enter the bios, boot from the CD or leave it sitting waiting for me to select a boot device. More often than otherwise, it becomes black, but you can still see what needs to be on the screen, it is simply not at all turned to see clearly. The laptop itself still works very well because it works on an external monitor and makes the system beeps, cd turns etc.
  Have you tried the following:
  Setting of various parameters in the graphics properties and in the bios but makes no difference.
  It also becomes active again if I press FN + F5 to swap monitors but turns off after a few seconds.
  It is not overheating as it's been all night and still sometimes happens when starting Cold Stone.
  I tried to start with / without battery - no difference.
  I tried to start without the disk HARD - no difference.
  I tried to remove the battery by pressing power for 60 seconds, then add the battery and new starter - no difference in power.
  I could have sworn it is the inverter, but it does the same thing with an inverter I know works! do not think that it may be graphic because it works on an external monitor and turn off.
  I'm out of ideas and looking for a genius to fix it for me please!
  See you soon

  Hey Buddy,

  > It turns on but not at all to see clear
  This would mean that the FL inverter is faulty the FL inverter of the internal LCD display controls the backlight of the screen and if the isn t working FL inverter you can see a picture, but very very dark.

  It would be a logical explanation for your problem, because there must be something wrong with the laptop LCD if an external monitor is working properly. Also if it happens in the BIOS the problem is not software.

  In your case I contact an authorized service provider and ask the guys for help. They can check your laptop and this should be done. Here, we can only speculate and discuss the different possibilities because it s just a user forum. EPA has professional diagnostic tools and can order all Toshiba spare parts.

  Good luck! :)

• Satellite Pro A300-28V - black screen boot failure

  My three days old Satellite Pro A300 began yesterday to hang at startup in Vista. I rebooted twice with good result, but now I see only the home Toshiba screen, then it goes black with a cursor top left. I won't answer on /F12/ F8 F2 or the recovery of the DVD. Indicator LED disc is black, fan-only sound. I have connected not no matter what external monitor ever on this one.

  At the moment so it's Sunday I chose the battery and will try again in an hour or two, otherwise I contact seller tomorrow. Any ideas what's happening? BIOS crash, hard drive (after three days)?
  / disappointed

  Hello

  Does this mean that you can t access the BIOS too?

  If it s, then it seems to be a hardware problem. Therefore, the service provider authorized in your country. They can help you to repair the laptop.

• Satellite Pro L770 - intermittent black screen

  I had some problems in the last few weeks with my L770 Pro Satellite.

  Occasionally, the screen is blank, it comes and goes without apparent cause, it can sometimes be empty for an hour, sometimes more, sometimes much shorter.
  There is a display when I connect to a TV via HDMI.

  The screen of the computer itself can go motionless on a desk, as well as come back when it has not been moved.
  As far as I know that some drivers have been updated.

  From there, I can only assume that there is a bad connection?

  Hello

  The display turns OFF when using Notepad or while staying away from the laptop?

  Please check the option called choose when turning off the display
  It is found on Panel-> power-> left column Options

  Here you can set the time when the display would be sounded.
  I would recommend settings this forever in order to test the functionality

• Satellite Pro A60 PSA65E black screen when you wake up from stand-by

  Hello

  I have a laptop computer (PSA65E) A60 and I am really slow recently so I decided to reinstall windows XP.

  I didn't have the CD that came with the laptop, so I don't know if it was an installation CD or recovery CD.

  But I installed WinXP home with SP3 slipstreamed in him with a folder for all the drivers. I installed without any problem and installed the drivers for the wifi, display etc.
  And yes it has been activated via windows until someone asks.

  In any case when I closed the lid and exploited later I couldn't have the laptop to wake up.

  Well it is but with a white screen, the fans start up and I get all the flashing lights on the front, but no display. I had the mouse pointer once but nothing else.

  I read a lot of forum posts here on all sorts of ways to fix, but I can't get an any of them to work. Tried to get new drivers, got all of the updates from windows update and the bios is the most recent.

  Any ideas on what is happening here, because it is really annoying me.

  Thank you Will

  Hello

  To be clear. The notebooks are actually not SP3 supported and if you want to have good work use OS support Windows XP SP2 home edition.

  I know what you're probably thinking now but all offered tools and utilities are obviously not designed and tested with SP3.
  It is a pity that you n t have Toshiba recovery CD. With the original recovery image, it should work correctly.
  Usually these problems are solved with the updates to the BIOS, but if you have a last I really t know what you can try to fix it.

  As you can see it is very often problematic to use latest updates on older models of laptop.

• Satellite Pro L300 PSLB1E - can I use the Bios for PSLB9E update

  Hi guys

  IM wondering if I can Flash my computer model toshiba laptop as in description with the following bios version

  PSLB9E Bios Version 2.20

  that is my current version

  PSLB1E Bios Version 1.50

  the question is - what the hardware is the same I'm sure that

  but will it work ok with this bios version?

  Thanks for any help

  Hello

  The question is: why you want to update the BIOS?
  Is there something wrong?

  As you know, the BIOS update is a sensitive technique.
  My laptop works with old BIOS and I did not upgrade to update even if the new version has been released I didn't update because my camera is ok.

  However, it seems that the two series are similar, but I think there are still some minor differences besides the BIOS update should not continues if the wrong version would be selected

• Satellite Pro L300 PSLB1E - how to install the package added value?

  Hello

  I tried to update the value added package on my machine, I followed the instructions and removed my previous version and same clean your pc with ccleaner and tune up Utilities 2009 running but everytime I go to install new value-added package I get the previous version the same message delete first in the add and remove programs list.

  I deleted this checked and double checked add and remove and it is not the case to be found, but still without success installing the new software.

  Can someone help me solve this issue?

  Thank you

  Hay

  You have restarted your laptop after removing the VAP system?

  I have updated VAP on several laptops and have never noticed anything like that.
  After removing the VAP system new version was always installed correctly.
  I imagine that something is still in the registry.
  You can check it out and try to remove manually.
  Search all entries from value of Toshiba and remove it.

  If this does not all you can do is to install the new OS using recovery image. After the new installation remove VAP, restart your computer and install the latest version.

• Re: Satellite Pro L300 - screen resolution maximum?

  I just bought an external monitor for my L300. The screen resolution is 1920 x 1080, but the maximum available on my L300 is 1280 x 800. The utility Service Station tells me that all my drivers are up to date - is there a way I can increase the graphics resolution? Any suggestions much appreciated!

  Details: Running Windows 7 Pro SP1 on a satellite Pro L300 PSLB9A - 02K 002

  Hi PeterSouthon,

  Need to unlock the other screen resolutions. Simply uncheck the option Hide modes that this monitor cannot display as you can see on [THIS | http://blog.wildvista.com/wp-content/uploads/2009/12/Lightroom_hide_modes-340x400.png] photo.

  After unchecking this box, you should be able to use the native screen resolution of your external display.

• Satellite Pro L300 - Display works only on the external monitor

  I received my new Satellite Pro L300 tonight & followed the instructions one by one. Although the power etc. lights were turned on, I had no monitor display at all. I then plugged on my old pc monitor who * fact * work. I tried pressing Fn + F5 but still nothing on the screen of the laptop?

  Thank you, Adam.

  I think you need to bring your laptop to an ASP. They can check your laptop and exchange all necessary parts.
  I think that your laptop is under warranty, if the repair is free for you :)

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!