Satellite Pro L300 PSLB1E - can I use the Bios for PSLB9E update

Hi guys

IM wondering if I can Flash my computer model toshiba laptop as in description with the following bios version

PSLB9E Bios Version 2.20

that is my current version

PSLB1E Bios Version 1.50

the question is - what the hardware is the same I'm sure that

but will it work ok with this bios version?

Thanks for any help

Hello

The question is: why you want to update the BIOS?
Is there something wrong?

As you know, the BIOS update is a sensitive technique.
My laptop works with old BIOS and I did not upgrade to update even if the new version has been released I didn't update because my camera is ok.

However, it seems that the two series are similar, but I think there are still some minor differences besides the BIOS update should not continues if the wrong version would be selected

Tags: Toshiba

Similar Questions

  • Re: Satellite Pro L300 - how can I reset the BIOS password?

    I put the password on the BIOS and electric start and I forgot the password.
    How can I reset the password?

    I have a Toshiba Satellite Pro L300.

    You must bring the laptop to an authorized service center to remove the password.

    Which country are you? Check your local Toshiba Web site for a list of the ASP (service centres).

  • Satellite L755 - 128 (PSK30E): can I use the BIOS for L755 PSK2YE?

    Updating BIOS for L755-128 (PSK30E) was never released. Current BIOS is 1.90.
    Is it safe to upgrade to 2.70 L755-12D (PSK2YE)? Same laptop except adding blue-ray player.

    Do not BIOS for other model of laptop.

    If the most recent BIOS is not released which probably means that there is no reason for this.

    You have problems with your laptop? I mean that should be the reason for the update of the BIOS?

  • Satellite Pro A200-16N: can I use the recovery CD after upgrade to Vista

    HII!

    IM thinking of upgrading to windows vista on my Satellite Pro A200-16N and I ran the pre-upgrade of windows vista from microsoft website and it says that my system will be in charge of windows vista so im ok about it.

    The problem is that if my laptop was to break or something like that at some point, will my recovery CD provided by toshiba to work always on the laptop with windows vista?
    They will return the laptop for windows xp or from my laptop has another operating system they will not work?

    Also...
    What's the deal with BIOS? : S
    I don't understand!
    If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
    As I download the new drivers before upgrading Yes?

    Thank you!

    The restore CD will of course work.
    The recovery CD will always set the laptop back to the factory settings. This means that the whole HARD drive will be formatted and the image of Toshiba will be installed.

    > What's the deal with BIOS? I put t understand!
    > If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
    To my knowledge, that this laptop was already shipped with Vista, so you need not update the BIOS if you want to reinstall Vista.

    Some series Satellite A200 needs a BIOS update if you want to use the XP.
    In such cases, it s advisable to upgrade the BIOS to version XP first, then install OS X.

    Best regards

  • Satellite Pro L300 will not start after the Bios Update

    Help please.

    I simply formatted laptop Satellite Pro L300.
    I used all the drivers updated Toshiba and everything is fine.

    I then updated the bios with the latest version.
    After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

    The ides welcome

    Hey Buddy,

    What start menu, you mean?

    I put t understand how it is possible until you wrote that your laptop does not start?

  • Satellite Pro A100 - where can I find the driver for ethernet controller?

    I recently changed my OS from Vista to XP and I'm not able to find a driver for the ethernet controller in my Satellite Pro A100 PSAAPE.

    Anyone know where I can get this driver from?

    Thank you!

    > I had already checked and cannot see the pilot
    I don't believe that. I checked the Toshiba download page, and you can see two LAN drivers for your model laptop.
    Install the latest version 9.2.24 and I think everything will be OK.

  • Satellite Pro A10 - where can I find the drivers for Vista?

    Hello
    I have a series A A10 PSA15E - 09VYL - EN SPA10 that came with Windows XP. Are there drivers I can use for my upgrade to Vista?

    The XP his works pilot OK (as far as I know) and I was wondering if there is no driver that would work with Vista 32 bit. I can't find, and the site indicates this model is not compatible with Vista, but I thought that maybe there is a solution...

    Any help gratefully received

    Thank you

    Dave

    Hello!

    Normally, you can find all the drivers on the Toshiba European driver download page as you say:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    But for this model of laptop are only drivers for Windows 2000 and XP are available.
    If you're searching on external Web sites for pilot.

    For example:
    -[www.intel.com]
    -http://aps2.toshiba-tro.de/wlan/

    Good bye

  • BIOS update failed on Satellite Pro A60 - how can I replace the bios chip?

    Hello, I'm in trouble of deeep.

    I tried to update my bios but something went wrong
    during the process and now the laptop does not start.
    (when I try to activate the satellite, nothing happens)

    I have to desolder the bios and replace it with a new?

    Is there an easy way to simply delete it?

    Please help me!
    Thank you

    Sorry but I want to just ask you a question: how far are you with laptop computer and technology of BIOS?

  • Satellite Pro L300 PSLB1E - how to install the package added value?

    Hello

    I tried to update the value added package on my machine, I followed the instructions and removed my previous version and same clean your pc with ccleaner and tune up Utilities 2009 running but everytime I go to install new value-added package I get the previous version the same message delete first in the add and remove programs list.

    I deleted this checked and double checked add and remove and it is not the case to be found, but still without success installing the new software.

    Can someone help me solve this issue?

    Thank you

    Hay

    You have restarted your laptop after removing the VAP system?

    I have updated VAP on several laptops and have never noticed anything like that.
    After removing the VAP system new version was always installed correctly.
    I imagine that something is still in the registry.
    You can check it out and try to remove manually.
    Search all entries from value of Toshiba and remove it.

    If this does not all you can do is to install the new OS using recovery image. After the new installation remove VAP, restart your computer and install the latest version.

  • Re: Satellite Pro L300 - unable to get into the BIOS or boot

    I have a Satellite L300, who will not get past the POST or the Toshiba start screen. It says to press F2 to enter setup or F12 for the boot sequence, but by pressing buttons does nothing and nothing happens - it just stays there. the HARD drive activity light flashes for a few seconds, then stops.

    I tried the new RAM and a HARD drive different, both with the connected power and battery alone without success!

    someone at - it suggestions?

    Hi jhilton0105,

    Hmm, I think that you have tried everything you can do, and in my opinion, it seems to be a hardware malfunction. Maybe it s related to the motherboard, CPU, module ROM or something else
    I think that your laptop should be verified professional people to get rid of this problem.

    You can find a list of aspic here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

    Good luck! :)

  • Satellite Pro L300-PSLB1E: XP does not control the wifi to the power connection

    * + Hello + *.

    I have a model Satellite Pro L300-PSLB1E and a XP Professional SP3 on it.
    Already everything works because I had a compilation of drivers copy of the past.

    The problem is that XP does not control the WiFi works without danger the and it disconects when I close the lid.

    So I tried with the power that said safety program to:

    Bq. [06/04/08 Power Saver Toshiba Windows XP 7.04.02I | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpwrsav-es-20080519173239.zip] + doesn't work-error 0 x 0 +.
    And I tried also with the thought of program Toshiba wifi on 32-bit compatibility:
    Bq. [Intel PROSet/Wireless Software | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpro-ncs-20080416140552.zip] + doesn't work too-Said controller is not installed when you and full work +.

    So, how to control the peripheral power turn off on?

    Bq. * + thanks for your attention and patient. + *

    Hello

    Firstly the Toshiba Power Saver requires the installation of the common Module.
    The common Module for Win XP v1.00.05 can be downloaded from the European pilot page Toshiba.

    So before installing the energy saver, install common Module, restart the computer, and then try the energy saver.

    In addition the Intel PROSet/Wireless Software can be used only with the Intel Wlan card.
    Is the laptop supports the Intel wireless network adapter?

    AFAIK the L300 series can be equipped with a Realtek, Atheros and Intel Wlan card
    Check it!

  • Satellite P10 804: where can I download the BIOS original version 1.1

    Is it possible that I can download the original bios version 1.10 for the P10-804 Satellite.

    Also the slash to the back button does not work. How can this be corrected?

    nevodoch

    Hello

    All BIOS for all Toshiba units, you can download from the Toshiba site:
    http://www.toshiba-tro.de/subpage/BIOS.html

    But you can not downgrade the BIOS for example: since version 1.2 to 1.1
    This is only possible by Toshiba ASP.
    In this case, if you want to downgrade the BIOS you should contact the service partner.

  • Satellite Pro L300-1AQ only to charge the battery while the phone is in use

    I have a Toshiba SP L300-1AQ.

    In the last month we started having problems with it quit unexpectedly, even on power outlet.
    This morning I used it for about a half hour. When I started the battery level was 39% full, so I plugged it into the outlet. The fire area on the front of the laptop came and taskbar in Windows icon showed it was plugged and load (battery light was orange).

    After half an hour, I checked the battery and it was down to 16%. I turned down the brightness of the screen to try to reduce energy consumption, but less than a minute at the level of the battery was down to 15%. The toolbar icon and power lights both still power showing tasks. The power adapter was cold to the touch. I expect that it is hot. It seems to me that the power adapter does not provide enough power to run the laptop and recharge the battery. If the laptop is in sleep mode, the battery may charge.

    We need a new power adapter?

    Thank you

    Nigel

    Hello

    It's really hard to say what the reason is but first of all, I think its hardware problem and not software related.
    Maybe the card mother doesn t charge battery problem more or the AC/DC adapter is defective. So can you test another adapter AC/DC to a friend for example? It would be interesting to know because if an AC/DC adapter works it seems to be a problem with the motherboard.

    I don t have Satellite Pro L300, I only Satellite L300 but it works really well and I can t notice a problem with the battery charging. It s all ok again :)

  • Satellite Pro L300 PSLB1E - black screen / no display

    Hello

    hope someone can point me in the right direction. I just bought a re-conditioned by Satellite Pro L300 Model PSLB1E of Dabs.com.
    He worked for about 20 minutes and then I got a blue screen error (I think that I just tried to open Windows Media Player when this happened).
    Sorry, but I didn't note down the error however seem to recall he mentioned win30.dll?

    Now, when I turn on the laptop I can hear things fan etc but there is no display on the screen.
    I don't know what to do and I have no warranty documentation.
    Suggestions this is appreciated please.

    Are you able to start, any bootable disks, Win XP, Win Vista, Linux live CD, etc.

    Please check this!

    But if you will not be able to boot from these disks, then you must contact the ASP (authorized service provider) in your country, because this problem looks a little more hardware related problem.

    Good luck

  • Satellite Pro L300 upgraded to Win8 but I would like to update the drivers

    I have upgraded to Windows 8, but I found the Wifi adapter needs to be reset frequently (it seems to be without a cause) - Troubleshooting Windows 8 solves it by resetting the adapter, but I thought there will be a fix for this?

    When I tried to update the drivers I found that the L300 is not (in the not extensible or expandable lists)-is the L300 compatible in this respect by another model? Or can you suggest how to update all the drivers of Toshiba for this model.

    Thank you

    Your Satellite Pro is the model of laptop old enough and not supported for Win8.
    It is difficult to find drivers for the notebook not supported models and old.

    Problem is that if you make the decision to do so anyway you are on your own and can be all just lucky if everything works properly.
    > is the L300 compatible in this respect by another model?
    It is not easy to give you the right answer. What needs to be done is to compare each hardware component important as chipset, GPU, chip sound, LAN/WLAN with other models and see if some Win8 drivers are available. It is not so easy.

    For example: Toshiba Satellite pro L300 offers 4 different hardware platforms. One you have? What is the model number of your machine?

Maybe you are looking for

  • Update of HP TouchSmart 520-1040 a graphic card

    Hi all I was wondering if I could update the graphics card from ati 5570 2 GB in my all-in-one. The computer can not play a lot HP Touchsmart has 520-1040AMD A8 3800 APU with Radeon HD Graphics 4 (CPUs) - 2, 4 GHzGraphics ATI Mobility Radeon HD 5570

  • error code 800719E4 with update KB980182

    It is one of the upgrade program that I load on my computer.  Cumulative Security Update for Internet Explorer 7 for Windows Vista for x 64-based systems (KB980182).  When I loaded the upgrade, he returned with the error code 800719E4.  Do not know h

  • Access XPcomputers in the same workgroup

    I have a question on the working group.   I have a couple of computers in the same workgroup at home and each computer does not have the user passwords.  These computers in the same workgroup can access all files (even files that are not marked as sh

  • Cannot be displayed on the mobile phone

    I bought a new router which is a pain in the you know what EA6500, I will still have a video look at a problem on mobile phone, I have a Linksys WVC80N camera, when I had the E3000 router I use to display it using my number of service provider Intern

  • HP 6500 has more on vista home 32-bit version do not print paper/type of error message is incorrect

    I can't understand how to solve this problem.  It's my default printer.  I get the error message paper/message type is incorrect. Tray 1 is correct Letter size is correct paper normal-media normal quality. I reloaded the driver, he always sends error