Satellite Pro L300 shows ACPI ATK0100 Kernel Mode Driver error

Similar Questions

• On Satellite A200 error message: could not open the ACPI ATK0100 Kernel Mode driver

  Hello

  I have laptop Satellite A200
  When I run the windows (vista) I get the following error: * 'Can t open ACPI ATK0100 Kernel Mode Driver.*'!
  I installed all the drivers and the error remains.
  I installed all the drivers on the Toshiba site, but the problem persists.
  The Device Manager shows me that each device is working properly.

  Someone at - it a solution?

  Thank you

  ACPI is the installation of your Windows operating system power management. If this fails you may need to run a recovery system on your computer. You can do this with the hidden partition on your hard drive, but this will erase all data on your machine. If this does not resolve the problem, you may consider making your hard drive, checked bad sectors, as this may have failed.

  I hope this helps. :)

• Satellite U400 (PSU44E) - ACPI ATK0100 Kernel Mode Driver missing

  Satellite U400-17V (PSU44E)

  I received my upgrade of Windows 7 at Toshiba with the included DVD upgrade. I did everything exactly what is said in the booklet.

  After completing the upgrade process and after turning on the laptop I got the message saying:
  Can not find an ACPI ATK0100 Kernel Mode driver

  What should I do?

  Best regards
  Tan Tunc

  Hello

  I started a thread on the same subject:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=126340

  So for me it sounds like this, you should try to reinstall Windows again. After that, the problem should be solved.

  Search with Google, you can find enough discussion about it. Reinstalling Windows can solve this problem.

• Satellite L300D - cannot open the ACPI ATK0100 kernel mode driver

  Hello!

  Please, I have a big problem.
  I used recovery dvd to re install vista basic.
  Since starting I have this message:

  * Cannot open ACPI ATK0100 kernel mode driver *.

  An unknown device is detected in my windows and there is no driver to install. I have no wifi detected.
  Manual installation of the driver atheros do not work!

  Please help me!

  What can I do?

  Hello!

  I never heard of this issue, but try to update the BIOS as Akuma said. It s worth a try! On the Toshiba site, you can search for an update of the BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In the worst cases, you should try to reinstall Windows using the Toshiba recovery disc.

  Good bye

• "Cannot Open ACPI ATK0100 Kernel Mode Driver" on G560

  Hello world.

  I have downgraded my Windows7, Windows XP machine and after reboot appear this pop-up message: "CAN Open ACPI ATK0100 Kernel Mode Driver. I was reading another post for the same problem but I don't know what I can use these instructions for my laptop model G560.

  Help, please!

  Thank you

  Try re - install

• SL500 - cannot open the ACPI ATK0100 Kernel Mode driver

  I installed Windows 7 (64-bit) and some of the drivers of Lenovo.

  Now, I get this message every time you start.

  Any ideas?

  uninstall the driver and the custom messege come, lenovo is not technically support windows 7, all other work drivers on my SL500 outside this driver, became the messege too, now I don't have after that I uninstalled it

• Unable to open driver ACPI ATK0100 Kernel Mode - Tecra A9

  Hello

  I reinstalled Windows Vista business on a Toshiba Tecra A9 with the restoration of dvd.
  After that, I'm getting more error: could not open the ACPI ATK0100 Kernel Mode driver.

  I installed all the drivers and the error remains.
  I downloaded all the drivers on the Toshiba site and installed these, but the question remains.
  The Device Manager shows me that each device is working properly.

  Someone at - it an idea?

  Thanks in advance.

  Paul

  Hello

  > I have reinstalled Windows Vista business on a Toshiba Tecra A9 with the restoration of dvd.

  Have you used the Toshiba Recovery CD or did you install Vista using the Microsoft Vista DVD?

  If you used the recovery CD Toshiba n you no need to download and install page of the Toshiba driver Vista drivers. The Toshiba Recovery CD already contains these drivers.

  In any case, I'd appreciate more feedback from you

• Satellite Pro L300 - commissioned only in safe mode

  Hay, my Satellite Pro L300 computer can be started in SafeMode only because if I start it normally it access to the desktop and then freezers.

  Can someone help with this problem?

  Hey Buddy,

  If the computer starts only in safe mode, this means that something has confused the OS

  Since when have you noticed the problem?
  No doubt it can help you to restore the system to a previous point. If it doesn t help your only option seems to be to reinstall Windows I think. Therefore, you can use the Toshiba Recovery drivers with tools disk :)

• Satellite Pro L300: x 3100 and updated updated driver chipset Intel 965 graphics

  Has anyone installed the Intel 7.15.10.1666 driver, dated 02/26/2009 for the Mobile 965 chipset? Here is their web page to download:

  http://www.Intel.com/support/graphics/intelgm965/

  Toshiba Satellite Pro L300 doesn't work for some reason unknown to me, with the automatic update driver Intel (download containing the executable file). Therefore, I followed the instructions for manual installation (the download with the zip file).

  My laptop works fine with this new driver, and there is a clear improvement in the transitions between images when you use the option to Windows presentation (slideshow).

  This new driver installs also 3 Intel graphics programs:
  For the management of the display function keys
  Access to the system tray
  Wizard TV

  I used Windows Defender to remove these 3 programs that load automatically at startup of the system to maintain a fast startup time and not loading unnecessary programs in memory. There is no me no problem.

  Why Toshiba has added that this to the driver download page?

  Hello

  Thanks for this second info...

  > Why Toshiba has added that this to the driver download page?
  Who knows maybe it has not been verified, approved and tested by Toshiba?

  As far as I know every phone manufacturers test and approve drivers before they will be released in the pages of pilot
  Perhaps, it has not been approved...

  However, it s good new that this driver works correctly.
  I'll check it too on my laptop.

  See you soon

• Re: Satellite Pro L300 PSLB9E - Win XP WLan need driver

  I have a toshiba Satellite Pro L300 PSLB9E

  It came with Vista, but today I installed windows xp.
  I managed to find all hardware except for the wireless driver drivers.

  Please can someone direct me to the correct drivers?

  Thank you

  Hello

  I think you should test the Realtek WLan driver.
  You can find directly on the Realtek site.

  Test it!

• kernel mode driver error handler

  For the last few days, right after that I get the message of welcome during Windows startup, I can get a box that appears and says "Kernel Mode Driver Manager has encountered a problem and needs to close", then he gives me a choice to send an error report to Microsoft.  When I look at the details of the error report I see the following:

  The error signature: AppName av8.exe AppVer: ModName 1.3.0.0: av8.exe 007a7c61 ModVer Offset 1.3.0.0

  After I closed the error box, I can see my desktop background, but nothing else.  There is no start menu, no desktop icons, no taskbar, nothing.  I can do a Ctrl + Alt + Del and go to the Task Manager and from there I can do a Run file to access the executables.

  I tried to run a system/registry cleaner (Piriform CCleaner), which found and removed a number of items, but it has not solved the problem.  I tried to access my anitvirus (AVG) software, but I can't find a way to access.

  Any help is appreciated!

  The error signature: AppName av8.exe AppVer: ModName 1.3.0.0: av8.exe 007a7c61 ModVer Offset 1.3.0.0

  The system has been compromised by what they call a "Rogue Antivirus". To remove it, please see - Remove Antivirus8 or Antivirus 8

  MowGreen Services update - consumer safety

• Satellite Pro A40 guard stop with the ATI driver error message

  My girls having some problems with her laptop and get back to Uni at the end of week for me to have a look on.

  Basically, he keeps closing sometimes with an ATI graphics driver error message. I had updated the memory last Christmas and resinstalled from scratch.

  My first impressions are it is overheating and I probably need to clean the fan, was wondering if anyone had any ideas?

  Thank you very much
  Keith (South end)

  Satellite Pro A40 is about 3 years old and it is possible that the unit needs to be cleaned. If the appliance is used intensively, I assume that there is more dust inside. By overheating of the appliance stops suddenly without any warning.

  As a first step the device. I don't know if it's the right idea to do it alone, but if you are familiar with laptops, you can give a try. After having done that, your daughter should carefully watch what happens the next few days.

• Satellite Pro L300 - questions ACPI in Linux: buggy dsdt implementation

  Hi, I have a L300 with Insyde BIOS 1.50 and I was struggling with the ACPI in Linux (like many others, the web is littered with hacks and workarounds for this laptop). After you enable the acpi kernel debugging, I noticed that some features were marked as not supported. Decompile and recompile with iasl Intel, I noticed this:

  Method (_OSC, 5, NotSerialized)
  {
  Store (Arg3, Local0)
  Multiply (Local0, 0x04, Local1)
  Name (BUF1, buffer (Local1) {})
  Store (Arg4, BUF1)
  Store (0, Local1)
  Store (zero, Local2)
  While (Local0)
  {
  Multiply (Local1, 0x04, Local2)
  CreateDWordField (BUF1, Local2, ACIP)
  If (Arg2)
  {
  If (equal (Local1, zero))
  {
  And (CAPB, 0xFFFFFFFC)
  }
  }
  On the other
  {
  }

  Increment (Local1)
  Decrement (Local0)
  }

  Return (BUF1)
  }

  Clearly, this does not meet the ACPI specification (of what is (was?) Toshiba active partner on all documents). From my understanding limited specification:

  (1) Method(_OSC... should list 4 rather than 5 args)
  (2) method (_OSC... must be serialized, because it contains a statement of name.
  2 (a) Alternatively the name (... statement could be replaced by a local variable any?)
  (3) and (CAPB, 0xFFFFFFFC) should have a result field. I looked side effects in the specifications, but none, so really this is if else block does nothing as far as I can see. That's where my understanding of the spec let me down. I don't really know what the original intent of the code, so I don't know what to do (though my best guess that is supposed to apply a bitmask for BUF1?).

  I hope someone more knowledgeable can help me solve this problem with an upgrade of the BIOS for this laptop (best) or a temporary to my DSDT solution so that I can send enough information for the Linux ACPI developers to circumvent the problems (not as good because it lets the other alternative operating systems out of the loop).

  Thank you for your time and consideration
  Phen.

  I doubt that anyone here in the forum would be able to help you.
  Here in the forum you would meet people who try to solve common issues of interest.
  Your problem seems more complex.
  Maybe you should check some special Linux why forums

  But who knows, maybe someone here with programmer and Linux knowledge can help you good luck

• Satellite Pro L300 PSLB1U - can't find WLan driver and

  I can't find the drive for my computer.
  So cannot use the wireless and the "peripheral modem on high definition audio bus" material also does not find the drive.

  Please help me!

  Thank you

  Hello

  I think that this model of laptop belongs to the series Toshiba us and therefore you should search in the Toshiba page we WLan drivers

  If you will not find the driver on the Toshiba page you will need to check your WiFi chip and then you could download it from the website of the manufacturer of chips.

  Then the MS hotifxes as on the need to bus modem device high definition audio first * KB835221 * and * KB888111.*
  Then you have t install the modem driver, then the audio driver.

  Good bye

• Satellite A100-599 - ACPI ATK0100 kernel at startup mode driver error

  I get an error msg (ACPI ATK0100 kernel mode driver error) at startup.
  I use Vista as my OS.

  Please advise as to how to fix this.

  Hello

  Hmm the message says something about ACPI
  As far as I know the ACPI is the installation of the power management of the Windows operating system. If you get this error message then, something must be wrong with the power management

  Have you tried to recover the laptop using the Toshiba disk?