Satellite Pro L300-software-service says I need update graphic driver

Similar Questions

• Re: Satellite Pro L300 PSLB9E - Win XP WLan need driver

  I have a toshiba Satellite Pro L300 PSLB9E

  It came with Vista, but today I installed windows xp.
  I managed to find all hardware except for the wireless driver drivers.

  Please can someone direct me to the correct drivers?

  Thank you

  Hello

  I think you should test the Realtek WLan driver.
  You can find directly on the Realtek site.

  Test it!

• Satellite Pro L300 - installation of Linux RHES4 cannot find HARD drive

  Hello

  I have a Toshiba Satellite Pro L300 and it comes with preinstalled Vista, I loaded the XP due to the fact that I was going to see if I could load linux Redhat Enterprise 4 and dualboot both operating systems at the same time but discovered this "DOUBLE BOOT" means that you can have 2 operating systems but can only bott one or the other...

  Anyway, my problem is that I want to just install Redhat Enterprise 4 linux on my laptop, but when it comes to partition the hard drive I get an error message saying "cannot find the hard drive to create file systems" then click OK and restart.

  Any ideas people?

  Chris.

  Hello

  I m not a Linux expert, but I think that the reason is missing SATA drivers.
  Normally, on each notebook with SATA HDD, you need SATA drivers to recognize the HARD drive before installing OS.
  If you install Windows XP or Vista, you need storage for this Manager. The drivers can be loaded with an external floppy drive.
  But I put t know how it works on Linux

  An alternative you can change in the mode of AHCI Compatible HARD disk BIOS. Then, you don't need drivers and your disk should be recognized correctly.

  Otherwise, I recommend this thread: http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14

  Welcome them

• Satellite Pro L300 - which improved after the BIOS update

  Hello users,.

  I just finished an update of the BIOS on Satellite Pro L300 using Updater Insyde Bios. I tried the Toshiba site to see what's new or what has improved since the update my bios 1.7version v2.2. But there is no search results. I also went to the site Web Insyde, but neither have they put up what has changed or improved?

  Is there a documentation or information which could help me to know how my laptop has improved or better after the update of the BIOS and what has changed since my update of the BIOS?

  Thank you

  Hello

  I assume you mean a changelog of the BIOS. Well, normally this document is placed on the Toshiba page where you can download the BIOS update.

  If you can't find such a t changelog, there is no available changelog. All that s!

  In addition the BIOS update should be performed only if it of really necessary. This means that if everything works fine, I don't see a reason to update because this update is a bit risky.

• Satellite Pro L300-152: deleted folder - but need Recovery DVD reocvery

  Hi, I recently bought a toshiba laptop *.

  I accidentally deleted the file on my disk 'data' through formatting the drive.
  I was told that I needed this folder in the hard drive to create my recovery disk

  This file is now gone.
  Is it possible that I can always CREATE the disc or the folder to DOWNLOAD/PURCHASE to use for the recovery process to create the disc?
  Without having to pay for a new disk - [which costs around £30!

  Please try to help because I'm stuck here...

  Thank you

  Bad news buddy.
  Without the recovery folder, you will not be able to create the Toshiba recovery disc.
  Unfortunately, but it looks like you will have to order the recovery DVDs.

  Formatting HARD drive was a bad move :(

• Need update graphic driver for Tecra M5

  Hello

  The website NVIDIA tells me that my graphics card on Tecra M5 is NVIDIA Quadro NVS 110 M pilot 83.06.
  I am running WinXP SP3.

  Is there a newer driver for this card, and if so where can I download it from?

  Thank you
  -michel

  Hello

  If you have downloaded this driver for a Toshiba page then you can use it without big risk!

  See you soon

• Need driver SATA XP for Satellite Pro L300

  Hello

  I have a Satellite Pro L300 Vista.
  If I have problems of major incompatibility with Vista I can swap the readers so I want to set up a second hard drive running on XP Pro.

  When I try to set up the XP he sees not the SATA hard drive. I know that it's because XP does not contain the SATA drivers. Couple of questions

  (1) I saw a comment that recommendsto change the BIOS for SATA setting to "Compatibility" and this should work. I tried this but did not find it worked - everyone find it works?

  (2) where can I find the XP SATA driver? I crossed the XP drivers for Satellite Pro L300 Toshiba's web site, but could not see any SATA driver.

  Thank you

  Hello

  As to the question;

  (1) some notebook models containing this function in the BIOS and some don t BIOS that SATA option. If the BIOS has this option, you should be able to put AHCI Compatible mode. Then a SATA driver won't be necessary but also your SATA function would be disabled and HARD drive might work more slowly. So I recommend to set to AHCI, and then reinstall the SATA driver.

  (2) the SATA driver is part of the Intel Matrix Storage Manger. You can include the SATA drivers using nLite software. The necessary files of the SATA driver can be downloaded from Intel here page:
  [32-bit (201ko) floppy Configuration utility 8.6.0.1007 | http://downloadcenter.intel.com/download.aspx?url=/17061/eng/f6flpy3286.zip&DwnldId=17061&ProductID=2101&lang=e ng]

• Need driver for Satellite Pro L300

  Hi guys

  I just formatted my cousin's pc and I put vista ultimate - 86 BIT and I can t find driver for it :(

  It is the Toshiba Satellite Pro L300 so please help me because I tried so hard and couldn't find a driver.
  And if there is really no driver I'm asking of you I cry me a driver please!
  do you know how I've worked to download it and now there is no drivers?

  In my view, that no company does have drivers but why? Is too recent or something?

  Hope you help me

  Hello!

  What you mean with 86 BIT? There are only two available versions: 32-bit and 64-bit.

  And have you searched the Web from Toshiba site? You can find all the drivers:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  There is no 64-bit drivers for 64 bit and Satellite Pro L300 and I think that nobody will do a driver for you. This forum from a user to s.
  You can search on external Web sites for drivers 64-bit like Intel, Realtek, etc.

  Good bye

• Satellite Pro L300-128 - startup problem

  Hi all

  I recently bought a Satellite Pro L300-128 GB specification, that has a Celeron M550 running Windows XP and a construction date of the end of June 2008. I have a problem with the switching on of the machine if it has been turned off for a long period of time.

  Basically, if the AC cable is inserted into the computer laptop and plugged in, the green light turns on, but pressing the button it does nothing. By the process of elimination, I have found that, after a short period of time (say 15-30 minutes) if (and only if) the AC cable is then removed from the laptop, it lights up then!

  Plug the AC cable, while the laptop is on, do not cut the machine and charge the battery as usual. The battery life seems very good, if a little short (say 1.5 - 1.75 hours when used "constantly").

  If the computer is restarted, it lights again very well - if it is turned off and left for a few minutes, once again no problem. But, if she is not with the battery fully charged and left all night - it lights again in the morning.

  Now, as a new machine, I'm wondering if the battery needs a long initial load (such as a mobile phone)? Nothing is said about it in the manual. I have not yet checked if the battery down completely himself during the night. I haven't run the battery to the laptop for a long time (say all day) to 'trickle charge '. I don't know if the period from 15 to 30 minutes to get the thing started is once again because the battery is completely discharged during the night (I need to check the BIOS to see if "Wake up we LAN/wireless" is activated)-anyone know how long a fully discharged battery must be charged before that the machine will let you start it?

  Under the machine, there are two battery release buttons and it seems loose - I don't know if it's related, but can't see how. Moreover, when the question arose (during the first delivery the laptop), I removed the battery and tried power upwards of food, but nothing to do.

  I ran all the software updates (chipset etc) I can find on the download page, the BIOS version is 1.40 (last) of the factory.

  Any suggestions would be welcome before I have use the service of repair under warranty for the first time! I don't know if it is related to the fact that the power button seems to be a micro switch rather than a good button/switch in the conventional sense of the term, i.e. you can 'feel' it do something!

  Thank you very much
  Richard

  Hello

  If you have purchased a new laptop, the battery is empty and needs to be charged in the first place.
  You can also connect the adapter to the laptop while the battery is empty and the laptop should also lights up properly.
  The laptop must also run without the battery and using only the AC adapter.

  It should also be possible to put the laptop by pressing the power button for about a second, if this is not possible, a malfunction of the laptop could be possible.

  In such cases, it s always advisable to contact the local ASP for a verification of the laptop.

  I mean your laptop is under warranty and if something is not wrong with the machine so everything must be replaced free of charge

  In my opinion, the laptop must be checked!

  Concerning

• Satellite Pro L300-1AF fails to start

  I have a Toshiba Satellite Pro L300-1AF that won't start, it stopped working a few weeks ago and I tried startup repair and things, and nothing seemed to work just kept loading a black screen with a cursor but nothing else. After a little more research, I found out how to restore to factory settings holding the 0 key etc. when I tried this he got 54% then the screen everything went black and now it used to boot. It happens with just:

  -Unable to start windows. a recent hardware or software change might be the cause.

  file:\Windows\system32\winload.exe
  status: 0xc000000e
  Info: the selected entry could not be loaded because the application is missing or damaged.

  He also says to insert your installation disc, but I have not one when I bought it.

  -What this means and how can I solve this problem? I tried the factory restore and just make it even worse.

  Any help or advice would be much appreciated

  Hello
  > He also says to insert your installation disc, but I have not one when I bought it.
  That's your first problem. This model laptop was delivered without disc recovery but the preinstalled software that allows you to create a recovery media. All this is clearly described in the document s user manuals.
  Now, your original Vista operating system has disappeared. On this path virtual I can't say with certainty what the problem is, but somehow, I think the HARD drive's troublemaker.

  What to do now? First you need the Windows installation for the installation of the OS disc. Original Vista may not be used more so my advice to you is to get the Win7 32 bit install disc and try to install it on your machine. Win7 is entirely compatible, so there is no problem to install all the necessary drivers, tools and utilities.

  By default the BIOS settings and try to install Win7. If the same problem recurs and Setup will stop I m afraid HARD drive is defective. If possible, try to get another HDD for testing purposes.

  You know you have to play a bit with your machine now and find out what the problem is.

• Satellite Pro L300 - XP runs slowly

  Satellite Pro L300 PSLB9E - Windows XP
  Works slow intermittently, but shows inactive in the Task Manager. Disable anti virus etc, but always slowly works intermittently.

  Can anyone offer advice please?

  Hey mate,

  First I must say that it is really hard to say why your laptop is running slowly. There are several reasons for this problem, but it would be interesting to know if you have installed the operating system preinstalled by Toshiba or did you install XP yourself using a disc of Microsoft? In this case, you should try this again with the Toshiba recovery disc. It contains a picture of the factory settings and so, your laptop should work correctly.

  In addition, I would recommend to defragment the HARD disk, disable some services and startup programs that you don't need and you try a good antivirus like AntiVir. After that, clean you the registry with CCleaner.

  Good luck!

• Shortcut keyboard Toshiba Satellite Pro L300 - properties will not end

  Dear lovers of Toshiba:

  This week, we have installed three new systems of Toshiba Satellite Pro L300 (two L300-153, a L300-156) with recovery media for Windows XP since the L300-156 product (no date on the disc, only two codes: CD 5 124624 and GMR400841EN0).

  The machines are beautiful and very effective, except for one problem: when the logout or shutdown Windows XP, the program called 'The Toshiba keyboard shortcut properties' does not stop automatically and opens a dialog "end program". The user may terminate the program immediately by clicking on the button 'End now' or wait until it to expire, after which the system disconnects or terminate normally.

  We noticed only after the installation of Service Pack 3 on all machines, so I don't know if the problem was present before SP3 has been applied. (We will be definitely check this on the following system and display the result.) Install the rest updates Windows with Service Pack 3 does not resolve the problem. Not more then that uninstall Toshiba Hotkey Utility by installing the package current, freshly downloaded from the Toshiba support area.

  A colleague suggested disabling startup programs. There are two likely choices for this purpose in the startup list + of + msconfig +: * thotkey * and * TFncKy *. Disabling either of these programs allows the disappearance of problem, but the functions of the * Fn keys are lost. The key functions are also lost when uninstalling the Toshiba Hotkey Utility.

  My question is of two parts:
  # Comment this problem be solved permanently, or circumvented (other than to say the customer never disconnect & close always the cover to hibernate)?
  # If there is no solution yet, how can a bug report situate with Toshiba, so I can get them the information they need to solve this problem and establish the responsibility?
  I will continue to post new information here that I acquire until a permanent solution is reached.

  Although this problem seems trivial and 'cosmetic' it's always awkward having to provide new machines customers with such an obvious flaw. It ourselves and Toshiba look bad, especially after that we sold the idea that people avoid problems of this kind to choose a Windows XP on Vista platform.

  Thank you, Robert Phair
  Director.

  > when the logout or shutdown Windows XP, the program called 'The Toshiba keyboard shortcut properties' does not stop automatically and opens a dialog "end program"...
  > We noticed only after the installation of Service Pack 3 on all machines, so I don't know if the problem was present before SP3 has been applied

  Problems could be caused by Win XP SP3. I've read several times that SP3 could be not entirely compatible with drivers or 3rd tools
  So I guess there is a problem of compatibility between the exe and SP3 files.
  By the way; SP3 is not completely released and updated test!

  I installed SP3 for some tests on my old non-Toshiba laptop and my work LAN card didn't so it of really possible that SP3 causes this.

  > There are two likely choices for this in the msconfig startup list: thotkey and TFncKy. Disabling either of these programs, the disappearance of the problem, but the functions of the Fn keys are lost

  It is clear that the thotkey and TFncKy files belong to applications that control the FN keys, SO if you would disable this in msconfig then buttons would not work.

  So, a solution might be a removal of SP3 System.
  In addition, you should try to clean the registry and operating system using the free tool like CCleaner.

  > Hope to get a response from an engineer from Toshiba, if there is no monitoring of this forum.
  I hope this too, but it seems that this forum is only a user forum.
  So if you want to report this behavior for laptop, contact the Toshiba ASP in your country

  See you soon

• Satellite Pro L300 - 27H: number invalid would be and model

  The school that I work for bought recentley 32 laptops from Toshiba Satellite Pro L300 - 27H.
  All laptops have been saved for the extended 3 year warranty and Cashback 2010 promotion.
  One of these laptops has now developed an error and needs to be repaired under warranty.

  I tried to do it via the website of Toshiba, but the system refuses to accept the serial number or model number of the laptop, saying there are not valid.
  I sent support in this regard, but had so no response or ackknowledgment.

  Anyone know why this model is not listed?

  John

  Hello

  If the laptop needs to be repaired, I recommend you get in touch with the local ASP in your country.
  The authorized service provider might be able to help you don t send or wait for the mails, but call the guy. It s a common number is your country.

  Here you can find the ASP, responsible for you:
  http://EU.computers.Toshiba-Europe.com-> supported downloads &-> locate an authorized Service partner

  Good luck

• Satellite Pro L300-1AQ only to charge the battery while the phone is in use

  I have a Toshiba SP L300-1AQ.

  In the last month we started having problems with it quit unexpectedly, even on power outlet.
  This morning I used it for about a half hour. When I started the battery level was 39% full, so I plugged it into the outlet. The fire area on the front of the laptop came and taskbar in Windows icon showed it was plugged and load (battery light was orange).

  After half an hour, I checked the battery and it was down to 16%. I turned down the brightness of the screen to try to reduce energy consumption, but less than a minute at the level of the battery was down to 15%. The toolbar icon and power lights both still power showing tasks. The power adapter was cold to the touch. I expect that it is hot. It seems to me that the power adapter does not provide enough power to run the laptop and recharge the battery. If the laptop is in sleep mode, the battery may charge.

  We need a new power adapter?

  Thank you

  Nigel

  Hello

  It's really hard to say what the reason is but first of all, I think its hardware problem and not software related.
  Maybe the card mother doesn t charge battery problem more or the AC/DC adapter is defective. So can you test another adapter AC/DC to a friend for example? It would be interesting to know because if an AC/DC adapter works it seems to be a problem with the motherboard.

  I don t have Satellite Pro L300, I only Satellite L300 but it works really well and I can t notice a problem with the battery charging. It s all ok again :)

• Cannot disable my Satellite Pro L300 PSLB9U

  Hello!
  I don't know what happened, maybe it's when I used a type of program registry cleaner: advanced system optimizer, or a virus my pc infected too: Worm/Autoit.AGW or AGX... but now when I want to stop the laptop, nothing happens.
  I made a backup of this registry cleaning and when I restored it, the first time I could shut down windows, but now it no longer works...

  I tried to boot from a dvd with xp sp3 and it reports a problem, maybe a virus or a bad hard drive.

  What can I do?
  and if I have to install xp all still once, where I find drivers Toshiba, utility etc that I need? the laptop is supposed to be new, but it's not come up with any dvd... it's a small store in Mexico City, almost a laptop second hand I think...

  Thanks for your help!

  (came a problem of energy saver utility from toshiba at the same time... now, it seems to be fixed...)

  Satellite Pro L300-PSLB9U-02PRL3
  Microsoft Windows XP Professional 5.1.2600 Service Pack 3

  > I tried to boot from a dvd with xp sp3, and report a problem, maybe a virus or a bad hard drive
  This may be a virus, because the new installation of the OS would erase the entire HARD disk and you'd get a clean OS.
  Maybe it's a hardware problem if it would be a HDD issue then you cannot start the operating system of the s. You would only see an error message that OS has not been found.

  You can check in the BIOS if the HARD drive is recognized, otherwise will need you a new HARD drive.

  > and if I have to install xp all still once, where I find drivers Toshiba, utility etc that I need? the laptop is supposed to be new, but it's not come up with any dvd... it's a small store in Mexico City, almost a laptop second hand I think...
  The new laptops Toshiba are not equipped with recovery DVDs!
  There's a reminder installed on the laptop and it says that you must create a disk recovery first!
  Looks like you've ignored it or didn't check this and now you have any disk :(

  In any case, Toshiba drivers are on the Toshiba page we because I think that it is a Toshiba model we
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download