Satellite Pro L300 - touchpad does not work

Similar Questions

• Satellite L50-A013 - touchpad does not work

  Hi all

  I've had my L50-A013 Satellite for about 7 months now.

  In the last month or so I started to have problems with the touchpad, freezing and does not not my contact.
  This lasted a few minutes at a time, then came the back of its own accord, almost like a very long latency period.
  This morning, however, I turned on my laptop and the touchpad does not work.

  Device Manager does not display a mouse or pointing device at all until I attach a mouse USB.
  By pressing the key that normally activates / deactivates the touchpad does not work - nothing changes and the light does not turn on in both positions.

  I tried reinstalling the drivers without result, and windows is no update that might help (or any recently that might have caused the problem).

  If anyone has any other ideas for what I can try, it would be amazing.
  The laptop is under warranty so I can hopefully get it fixed, but if possible I would really do not have to go without a computer until it's settled.

  Thank you all for your time,
  -Sase

  Hi Sase

  It is not easy to say what the problem is, but I can imagine that there is hardware problem. Perhaps touchpad loses the connection to the motherboard. I mean if this piece of hardware is not detected I can imagine this scenario.

  Of course best test you can do now is to reinstall OS and test functionality with the factory settings, but will delete your actual configuration of OS and software pre-installed.

  If this kind of test is possible do. If not, I think you must contact the nearest Toshiba service provider and ask for help. They have special diagnostic tools and they can check it for you.

• Re: Satellite P205-S7469 TouchPad does not work

  Hi guys.

  I bought this computer a year ago in the States. Then I moved to the Sweden.
  My hard drive crashed. Buy a new
  But I left apperently all CD for the computer back to the States-. -.

  So now, I have downloaded Microsoft windows Vista Home Premium because it's what I had before.
  Used the CD Key which was written under the computer.
  If everything works Gr8 except my Touch Pad...

  I installed all the Windows Update drivers were able to give me.
  Went to support toshiba and downloaded page the drivers from there.
  But still, nothing. It won't work.

  Anyone know what I can do? Or what is the problem.

  Thank you all for all the help you can provide me.
  Lol XoXo

  Hello

  I have no idea why the touchpad does not work yet, you have installed the good drivers do you have?

  Are you sure that the touchpad is not disabled? Usually, you can disable the touch pad using the FN + F9 key combination. Check it out.

  The P205 Sat is very similar to the European model Toshiba Satellite P200.

  Maybe you can download two Touchpad (Alps Electric and Synaptics) drivers from the Toshiba European page choose either of the P200 series and check the drivers!

• Satellite L40 - 18W - Touchpad does not work

  Hey guys...

  I have Toshiba Satellite L40 - 18W, bought in the Middle East, and unfortunately its touchpad does not work... I checked and double checked all the possible places, so anything that is disabled or misconfigured but found nothing.

  As there are quite a few errors in the operating system I formatted my hard drive and install WXP Prof, installed all the drivers, but the touchpad is not always works. I'm very confused as before and after formatting the pointer moves a little when I use the touch pad at the beginning of the UPA start? ¦

  Help, please...

  The best audit is to install the operating system with the original Toshiba recovery image and test it with the factory settings. In this case touchpad should work fine. Otherwise, contact the service and leave check your laptop.

  Sorry, but I don't see another solution for you.

• Satellite S50T-B950 - touchpad does not work after update of Windows 10

  Hello "Toshiba."

  After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work

  Please help me solve this company of Toshiba problem

  The same theme has been already discussed and resolved in this thread:
  https://Forum.Toshiba.EU/showthread.php?83885

  Then please follow the proceedings in the other thread to avoid misunderstandings

  by the way: here is the link to pilot site Toshiba win 10:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Satellite L500D - 16L - touchpad does not work.

  I have a new L500D but my touchpad does not work.
  My diagnosis of computer told me that there is no problem, I have a mini mouse USB connected, would that be causing a conflict?
  Can someone please give me some advice.

  Thank you

  Try to press Fn + F9 to toggle the Touchpad. Also take a look in the BIOS, the touchpad can be disabled it. Also try to uninstall the software for your mouse USB mouse (if you have installed everything), this software can cause a conflict.

• Satellite Pro L300 - sound is not working properly

  Hi all!

  Last week, I bought my Toshiba Satellite Pro L300.
  I have had no operating system with the laptop, but I had my own XP, so I changed the SATA drives in compatibility mode and installed windows XP Pro.
  (By the way this is a Vista laptop officially)
  I installed all the drivers, but I have a problem with the sound. It has a bad quality, but this isn't the biggest problem.
  If I start listening to music, the sound stops every 3-4 seconds for a fraction of a second. It's as if the processor worked (like the computer was loading, and the processor is a bit overloaded) I usually have this experience if I run many programs simultaneously on my old computer, it slows down and the music stops for a second. But on the new laptop, I run winamp, I have dp nothing but listen to the music, and I get this problem.

  Can anyone help? Is it because of XP? Or the driver does not work properly? Or I have a big problem and should go back to the store?
  Please write!

  Hello

  Did you notice HARD drive activity when this happens?
  Maybe some anti-virus works in the background.

  Maybe you can order original Toshiba recovery DVD for your laptop model. Check it out under the https://backupmedia.toshiba.eu/landing.aspx

  Using WXP only? I ask this question because I believe that you can only get to this Vista laptop.

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

• Satellite Pro 4270 - USB does not work

  Hello.

  I had this problem for a while, and I was wondering if anyone had any suggestions to solve this problem.

  I have more or less of work Satellite Pro 4270 (4200 Series) computer laptop with XP on it.

  The USB port does not work. I don't know why it does not work. I tried to replace the USB module on the motherboard that has not worked. I've updated the BIOS to the latest version, has not functioned. Removed and reinstalled the drivers in XP, not worked. I'm out of ideas.

  IrDA works very well.

  Some suggestions please. Thank you

  Hello!

  I understand, were you solder the module USB motherboard and then solder another module?

  I mean, what have you done with the module USB, replacing? Sorry, I don't remember exactly how the USB module is connected to my mobo SP4270 seen last about the half a year ago... If the welding, I don't wonder the problem... but if not, there may be a solution...

  Best regards

  Pete v.

• Satellite Pro U400 - BT does not work after installing Win 7

  Hello.

  I have a problem with my bluetooth device. I have Toshiba Satellite Pro U400.
  My previous operating system was Windows Vista business and I just replace it with Windows 7.
  Since I installed it my device Bluetooth does not work anymore.

  I have had no problems with it with my previous Windows.
  Now, the following messages will appear: "Bluetooth stack for windows by Toshiba is incompatible with this version of windows" I have windows 7 Professional.

  I tried to update the drivers, but I was told that I have the best and latest drivers.

  Can someone help me?

  Hello

  Seems that you are still using an old battery Bluetooth.
  You this should remove the system and need to install a new one which you can download here:
  http://APS2.toshiba-tro.de/Bluetooth/

  You can find the pile of BT for Win 7 32 bit and 64 bit version

  Welcome them

• Satellite Pro L300-21F does not start and the screen remains blank

  L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

  So my questions are:
  1. He's probably right?
  2. is it a common problem with an easy solution?
  3. what else can do before shelling out for a new Board of Directors?
  4. is there a link where I can find how to disassemble the case?

  Any help appreciated

  Hello

  > 1. He's probably right?

  Yes, it looks like motherboard failure

  > 2. Is this a common problem with an easy solution?

  If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

  > 3. What else can do before shelling out for a new Board of Directors?

  I don't think you can do anything with fried mobo

  > 4. Is there a link where I can find how to disassemble the case?

  Take a look at the site called irisvista.com

• Satellite P20 PSP26C - touchpad does not work

  Hello...

  My touchpad P20 went down all of a sudden. I've tried everything. Fn + F9 key does not work when I try it will stop the computer.

  I reinstalled the driver several times. I've had enough, so I work with a USB mouse.

  Anyone know how I can retrieve my touchpad. (ALPS)

  Thank you

  Hello

  Eventually he s a hardware malfunction?

  But before that we will offer you a defect of the touchpad, you must reinstall the laptop with the Toshiba Recovery CD delivered to check if this problem could be linked to the software error!

  Usually after installing the recovery CD the laptop will be put back to the factory settings and the whole system should work fine.
  But if this doesn't help then the material could be really defective and a replacement is necessary!

  So check that out!

• Satellite Pro 6100 Wireless does not work after restoring from HARD drive

  After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

  Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

  I have found some drivers Agere, but am not sure

  (1) if they are correct
  (2) how to install since the machine works in a way limited with the card in place.

  Any advice?

  Hello

  I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

  (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

  (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

  But this is only possible if the windows started successfully

  PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
  I discovered that you need to update several utilities if you have installed SP2 on this laptop.

• Satellite Pro L300-1FN does not start - hang at the BIOS splash screen

  My Satellite Pro L300-1FN refuses to start. When turned on the laptop displays the home screen toshiba/insyde H20 BIOS and the message "press F2 go to the Setup utility, F12 to go to the start menu" and flashes the light access to the hard drive, but don't try to continue loading. I left the bios at the start screen, but it doesn't do anything for long hours on a power supply or is running the battery flat while on battery.

  Is there a way to re - put the BIOS on this unit? If it's a desktop unit I would remove the CMOS battery to force a reset of the BIOS but that's impossible on a laptop. The hard drive is fine because I have it plugged into another system to remove valuable data.

  Hello

  What happens if you press F2 when starting the laptop to the top?
  You can access the BIOS?
  If so, access the BIOS and set its default value. I think you need to press F9 or F10 to get default parameters, but this will be mentioned at the bottom of the page of the BIOS.

  Check it!

• Satellite Pro L300 - Windows does not start

  Silly person I am, and being computer illiterate I turned off my laptop while it was downloading updates.
  Now when I turn it on it shows a black screen with 2 boot options.
  1 to start repair/restore mode,
  1 to start windows normally but does not work.

  I made the recovery discs after that I bought the laptop, but I am wary about its use.
  Although I don't do a lot of work that needs to save, I only surf the net and make emails.

  There are other safer options for marketing?

  Hello

  If you have any important data on the HARD drive you can use the recovery disk to reinstall the OS again and set up the device to the factory settings.
  The recovery disc will format the HARD drive and erase everything from the HARD drive.
  The installation process does not take long, you need to boot from the recovery disk and having to follow the instructions on the screen. All that s!

  Welcome them