Satellite Pro L300 - use of the power cable between the countries

Similar Questions

• Satellite Pro L300-152 lose the power connector - how to disassemble it?

  I have a Satellite Pro L300 - 152 unit, which is out of warranty.
  I have a bad power connector, it has been pushed back and be dislodged from his seat or brocken cradel is within the computer.

  I am trying to remove the back to see if the power connector can be repaired or remains in its cradle.
  I removed all the screws and all devices, but can not get it off the computer.

  There seems to be something with the keyboard, which I took.

  Can you help me?

  To fix the power connector the whole notebook must be disassembled and you must have access to the motherboard. Disassembly procedure is not complicated if you have maintenance manuals and instructions.
  To have full access to the motherboard, you must remove all the screws from the underside and also all the screws under the keyboard. You will then be able to separate the notebooks and disassemble the upper.

  Tell me exactly what you have removed so far?

• Satellite Pro L300 - using partition magic

  Hello

  I have a Toshiba Satellite Pro L300 laptop and I would like to make an additional partition next to the C: drive already existing and the hidden partition. I created the recovery discs and I want to use the magic of partition for the partitioning process (no new installation of windows xp). Can someone tell me if using partition magic will have adverse effect on the eventual recovery from disks created?

  Thanks in advance

  Usually you can do with Windows option in disk management, but can you please tell me something first?

  You are using Vista or Windows XP Home edition? I ask this question because if you use Vista preinstalled HARD drive must have already two partitions. Please check in Windows Explorer.

  Hidden partition is described as an EISA (WinRE) partition?

• Re: Satellite Pro L300 - update after the BIOS, Windows will not start

  Hello

  I updated the BIOS on my laptop to the latest version and now it does not start in Windows. I can get to the BIOS menu. I tried to restore the default values and saved the day, but he's just a blue screen with writing on whichIi do not have the time to read it before it tries to restart and continues to do the same.

  Any ideas anyone?

  see you soon
  Phil

  Hi chaospunx,

  Which HDD mode did you use before the BIOS update? Perhaps this option, you need to change, then Windows will start up again.

  You can choose between the mode of access AHCI and Compatible HARD disk.
  Check this box!

• Satellite Pro L300: Option of USB Power on / off mode "sleep"?

  I'm charging a USB device when the laptop is in mode 'sleep'.
  Is this possible? An option in Vista or BIOS?

  Any ideas would be appreciated.

  Thank you

  (Running: L300 Sat Pro, Vista 32-bit)

  Hello

  As I know the USB Sleep & Charge function is not available on the Satellite L300 series!
  Have you checked the user manual?
  Have you found the info USB Sleep & Charge is possible on L300?

  In my opinion it s is not possible!

• Satellite Pro L300 freezes on the Toshiba homepage

  When he put on then get frozen screen toshiba so impossible to go to safemode etc...

  Can anyone help?

  Hello

  This means that your laptop can not pass the POST (Power On Self Test).

  Self test is a rapid diagnostic test that checks the motherboard and connected devices
  Theoretically, what could cause this problem faulty motherboard, RAM failure, etc.

  In your case, I recommend you remove the RAM modules and check the simple modules.
  You can try to remove only a single module. Check the two modules by using this procedure

  Otherwise, you will need assistance from professional technician that the guy could run tests to find out what part is malfunctioning...

• Satellite Pro L300-152 and the task bar freezing

  Hello

  The taskbar seems to freeze whenever I use my laptop. I try to click on something like the volume and it freezes, I then gives me the option to restart windows Explorer, close windows Explorer, or waiting for the program to respond. Once it has rebooted the icons for volume and Wi - Fi connection disappear from the lower right corner and are not available through any other means.

  There seems to be no consistency to this incident - it happens when programs are running or not, regardless of how many times I use the laptop either hours or minutes, and there is no delay between the taskbar being insensitive (sometimes it doesn't freeze again, sometimes it freezes just after the restart). I did virus, spyware/adware/mallware scans, clean my laptop, and it had made no difference.

  All I have this problem or knows what could be causing it and how it can be stopped? Any suggestions would be welcome thanks

  Kind regards.

  Hello

  Googling around you will find many forums where people write about this problem of gel. It is obviously related to Microsoft and that there must be a few patches.
  I also found the link to a fix that should help you.
  Visit http://support.microsoft.com/kb/932406/en-us and if this can help you.

  Please let us know if this will help.

• Satellite Pro L300 restarts once the update the BIOS of the TOSHIBA Site

  After an update of the BIOS under windows, my system restarts more. F2, F8 keys are ineffective to turn on time. The screen stays black and there is only some permanent access to the CD/DVD drive.

  Can someone explain to me what happened and how to fix if possible? Should I reflash the BIOS or something else.

  Thank you very much

  In my opinion, something went wrong during the update and the module ROM was not properly flashed.
  According to the people here in the forum, only a Toshiba service agent can help you.

  But I found an interesting thread here in the forum that may be useful.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54395

  See the notice published by the user ale210

• Satellite Pro L300 - Display works only on the external monitor

  I received my new Satellite Pro L300 tonight & followed the instructions one by one. Although the power etc. lights were turned on, I had no monitor display at all. I then plugged on my old pc monitor who * fact * work. I tried pressing Fn + F5 but still nothing on the screen of the laptop?

  Thank you, Adam.

  I think you need to bring your laptop to an ASP. They can check your laptop and exchange all necessary parts.
  I think that your laptop is under warranty, if the repair is free for you :)

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• Satellite Pro L300 1AD is unable to install the Windows XP display driver

  I just installed XP on my Satellite pro because my internet modem doesn't work with Vista.

  I went to the main site of Toshiba to install display drivers, but they moved it, it keeps bringing the message "this driver is not for this computer please contact manufacturer.

  I put t understand why because all the other drivers that I downloaded on the same work, it's just the display one page. Does anyone know what's wrong?

  You have downloaded the latest driver for Satellite Pro L300?
  On the Toshiba site it s version 6.14.10.4953.

  An alternative, you can try the drivers from Intel, but normally the Toshiba driver should work.
  I always use the driver from Toshiba and never had any problems.

  Furthermore, I looked on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

• Satellite Pro L300 - which improved after the BIOS update

  Hello users,.

  I just finished an update of the BIOS on Satellite Pro L300 using Updater Insyde Bios. I tried the Toshiba site to see what's new or what has improved since the update my bios 1.7version v2.2. But there is no search results. I also went to the site Web Insyde, but neither have they put up what has changed or improved?

  Is there a documentation or information which could help me to know how my laptop has improved or better after the update of the BIOS and what has changed since my update of the BIOS?

  Thank you

  Hello

  I assume you mean a changelog of the BIOS. Well, normally this document is placed on the Toshiba page where you can download the BIOS update.

  If you can't find such a t changelog, there is no available changelog. All that s!

  In addition the BIOS update should be performed only if it of really necessary. This means that if everything works fine, I don't see a reason to update because this update is a bit risky.

• Satellite Pro L300 - Europe downloads site play?

  Try to download the drivers for a series of Satellite Pro L300.

  The site allows me to choose the model and series, but then presents some options for the operating system, so it lists the drivers available for this model.

  Interestingly, this seems to affect all models on the site, so it doesn't seem to be possible to download the drivers from the site right now.

  I would go to sites for other geographic areas such as North America, but this particular model (PSLB9E-04P007EN) doesn't seem to be sold or support outside Europe.

  Hello

  Yes. I noticed the same thing seems that there is a show temporally with the European driver Toshiba page. Maybe they have some maintenance or anything else
  Maybe you should wait a bit and he should visit later

  See you soon

• Satellite Pro L300-1FN PSLB9E PCI/controller XP drivers Ethernet

  Hi all, I have downgraded my laptop XP Pro and downloaded the drivers concerned on the Toshiba site. I'm still waiting for Miss an Ethernet and PCI controller drivers. Someone at - it a link to the drivers for this model (Satellite Pro L300-1FN (short series: PSLB9E)) or know the serial number of the relevant evidence?

  Thank you

  Hello

  Ethernet controller could be the WLan or LAN card.
  Satellite Pro L300-1FN supports the 802.11(B/G)-RTL8187B REALTEK or ATHEROS 802.11 B/G Wlan card.
  The LAN card must come from Realtek 10/100 Mbps

  The WLan driver can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/

  Driver LAN from here:
  http://www.Realtek.com.tw/

  See you soon

• Recovery creator disc error code: 1100 8-48-00000002. Satellite Pro L300-15

  Hi all.

  Satellite Pro L300-152 of the Vista 32 SP2.

  This laptop was gave me to try to repair (another instance of stolen suicide Vista).
  After retrieving the system (no re - install wasn't necessary), I would like to create a disc of recovery for the owner.

  However, when I try to run the "Toshiba Recovery Disk Creator", I get an 'Error' window with the following message is displayed "an unexpected error has occurred. Exit this application and start it again. (Error code: 1100 00000002-48-8). Of course restarting the application generates another identical message.
  No one knows what could be the cause of this error and how do I create a recovery for this notebook drive.

  Take care of all.

  Mike

  Hello

  This error message usually appears because the non compatible CD or DVD.
  I think you should first check if there is an ODD firmware update.
  On the Toshiba European page driver you might find updates firmware for different CD/DVD drives.

  You should check your CD/DVD drive and a compatible firmware is available, then you need to update this
  If there is no update firmware, then you must try different discs from different manufacturers to create a recovery disk.

• Satellite Pro L300-1AQ only to charge the battery while the phone is in use

  I have a Toshiba SP L300-1AQ.

  In the last month we started having problems with it quit unexpectedly, even on power outlet.
  This morning I used it for about a half hour. When I started the battery level was 39% full, so I plugged it into the outlet. The fire area on the front of the laptop came and taskbar in Windows icon showed it was plugged and load (battery light was orange).

  After half an hour, I checked the battery and it was down to 16%. I turned down the brightness of the screen to try to reduce energy consumption, but less than a minute at the level of the battery was down to 15%. The toolbar icon and power lights both still power showing tasks. The power adapter was cold to the touch. I expect that it is hot. It seems to me that the power adapter does not provide enough power to run the laptop and recharge the battery. If the laptop is in sleep mode, the battery may charge.

  We need a new power adapter?

  Thank you

  Nigel

  Hello

  It's really hard to say what the reason is but first of all, I think its hardware problem and not software related.
  Maybe the card mother doesn t charge battery problem more or the AC/DC adapter is defective. So can you test another adapter AC/DC to a friend for example? It would be interesting to know because if an AC/DC adapter works it seems to be a problem with the motherboard.

  I don t have Satellite Pro L300, I only Satellite L300 but it works really well and I can t notice a problem with the battery charging. It s all ok again :)