Satellite Pro L300 will not connect to Wifi after hibernation

Similar Questions

• Satellite Pro L300 will not start

  I have a portable Satellite Pro L300 and he won't start (in other words the power button and not going not past the first screen).

  Works for keyboard, but F2, F8 or F12 will not do anything, I can't here the disk hard powerup but it's like no one is at home. I don't know if it's the motherboard or the onboard battery. The computer is about 7-8 years

  Can anyone help.

  It s certainly nothing wrong with a RTC battery (as you said internal battery).
  The RTC battery can be charged. The unit must be turned on and adapter must be connected at least for about 18 hours.
  But I guess that this isn't a problem.

  The laptop does not start because of a hardware malfunction, but it's hard to say what role may be affected. But you should absolutely consult the RAM modules.
  This should be the first step, since the RAM modules are easy to replace.

  All other parts should be checked by the type of service.

• My new Satellite Pro L300 will not work

  I bought a new Toshiba Satellite Pro L300 on eBay. I connected all the cables according to the installation guide. At first he asked my details, then I logged in and it went to a pages where he says he was preparing. Then I was sent to the newspaper in the section, and the same page appeared saying that he was preparing.

  After what happens about 5 times, he went to a black screen where the only thing I could see was my mouse cursor.

  I closed and restarted, I tried to go into the settings using F12. I was not able to work at all, no matter what I do.
  Unfortunately, I don't have a CD of the OS, but it was announced as having Vista as OS and have Microsoft Office Suite on him as a built-in wireless modem, so it was supposed to be ready just to turn it on. Well I can't even turn it on.

  What should I do? How should I do?

  At first, I must say that F12 has nothing to do with all the settings.
  At this point, I recommend using the new operating system installation using the HDD recovery procedure.
  How to proceed as a result of this document, you can find > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  When the OS is installed and started up properly first thing you need to do is to create the disc of recovery facilities. "You can do it using preinstalled" Toshiba Recovery Disc Creator. The shortcut is placed on the desktop.

• Satellite Pro L300 will not start after the Bios Update

  Help please.

  I simply formatted laptop Satellite Pro L300.
  I used all the drivers updated Toshiba and everything is fine.

  I then updated the bios with the latest version.
  After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

  The ides welcome

  Hey Buddy,

  What start menu, you mean?

  I put t understand how it is possible until you wrote that your laptop does not start?

• Satellite Pro L300 will not answer F2 to enter the bios

  Hello
  one of my clients sent me to fix a toshiba Satellite Pro L300...
  Windows completely froze so they are off which makes windows unbootable.

  im having the problem now is that pressing F2 does not enter setup and F12 does not display the start menu.
  is there another key that I have to press on as well as F2 in the Fkeys allows access to bios?

  Thanks in advance

  Hey Lodore, that of great! :)

  Thank you for your comments.

• Satellite Pro L300 will not start - cannot get into the BIOS

  Dear,

  I got a satellite Pro L300, width a HARD drive partitioned, with Win XP installed C and D with Windows 7 installed, the problem is the following:

  Days when I turned on my laptop, the OS splash screen appears, stop boot on Toshiba logo process.
  In addition, I can't enter the BIOS with the F2 key or the Boot Manager by using the F12 key.

  Help, please.

  > stop boot on Toshiba logo process
  This means that the laptop can not pass the POST (power on self test) properly and it would mean that a hardware problem has been detected on the motherboard.

  Remove one of the modules RAM (check both) and try to turn on using a single module of RAM.
  It is possible that one of the RAM modules is defective

  It would also be possible that the motherboard is malfunctioning, as you can see, it is hard to say what role could be wrong, but what looks like a serious hardware failure

• Satellite Pro L300 will not start until after the update of the BIOS of 1.30 to 1.50

  Dear all,

  I have a Toshiba Satelklite Pro L300 and had no problem for the last 4 years. Last Monday, I replaced my hard drive with a new one and after installing a new copy of Windows XP Pro, I have downloaded all the drivers on the official site. After my last update, I have updated the BIOS to version 1.30 to 1.50. After a few seconds my laptop has rebooted and was not able to load Windows and / or recognize my new hard drive.

  I tried several methods, using safe, optimal Bios default etc but was unsuccessful. IO could not even re - install Windows as the hard drive is not being recognized by the laptop. I've formatted the HD again through my desktop Pc, but still have the same problem.

  I am really worried and would like immediate help!

  Best regards

  Engelbert

  > I formatted the HD again through my desktop Pc, but still have the same problem.
  What happen exactly when you turn on your laptop?

  Set the BIOS as deult and try to install the original recovery image that you got with your laptop. If everything works OK that means upgrading the disk HARD was a success and there is not a serious hardware problem.

  After this check, you can try again to install Windows XP Home edition.
  Please post comments.

• Satellite Pro L300 does not connect to the internet using a broadband

  Hello!!

  I reformat my laptop with Windows 7 a few days ago.
  When I tried to use a broadband internet connection, it won't work.

  Pls help me on this.
  Thank you.

  Hello

  I assume you are talking about WLan.
  You have installed Win 7 as a new OS.
  Have you installed good WLan driver?
  The WLan card is recognized in Device Manager?

  If so, have you turned on the wireless network adapter by using a switch in front of the laptop, and FN + F8?

  LAN working properly?

• Satellite Pro L300 - does not start form DVD

  Problem: my Satellite Pro L300 will not start no optical drive (DVD)

  Leisure problem scenario:

  Insert the DVD Toshiba recovery in optical disc drive,
  Restart and during the boot prompt, press F12 and select the optical drive.
  Black screen and the cursor flashes in the upper left corner... after the seconds flew L300 starts to beep loudly. No message on the screen.

  Reports of BIOS version 1.50 while the latest version of the BIOS update on the web is to 1.40...

  Model No.: PSLB1E-02200GG3
  Serial 78685377Q

  I'm doing this because I want to change the OS from Vista to XP.

  Hello

  Stand by. You mean you are using a Toshiba original WXP for Satellite Pro L300 recovery CD/DVD or what?

  Have you tested with any other CD bootable (Linux)?

• My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  Not knowing what the 'followed the steps posted' have been

  The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.

  The iOS device sees the network?

  Error messages?

  Other devices connect now?

  The iOS device has connected before?

  Try the following to rule out a software problem:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Power off, then back on your router

  . - Reset network settings: settings > general > reset > reset network settings

  - iOS: troubleshooting connections and Wi - Fi networks

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  - iOS: recommended for WiFi routers and access points

  -Restore from backup. See:

  iOS: how to save

  -Restore factory settings/new iOS device.

  If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Satellite Pro L300 - may not always connect to the same strong connection router

  I currently have a Satellite Pro L300-155. At work, the WIFI signal is strong everywhere where I am in the building because we have 2 WIFI connections. However, I can connect okay in 1 room but if I just go in the other room, I'm unable to connect - and the connection is still strong. This also happens intermittently at home.
  Is it of diagnostics that I can run on the Toshiba to test wifi?

  Where can I find what chip it is? Where is the wifi location - on a motherboard, etc?
  Can it be replaced and where I could quote from?

  Thanks in advance

  Hi cooky44,

  In my opinion, you should update the routers firmware and update your WLAN driver.

  Furthermore, I have created an interesting document on improvements to WLAN connection:
  [WiFi: improved reliability of connections | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=68]

  Also check the forum similar topics WLAN.

• L850 satellite will not connect to Wifi

  Hi, new here.

  I have a Toshiba L850 which does not connect to wifi,
  Many other devices in the House and the L850 was last week.

  You can see my router but will not connect.
  It is the 'limited access' connection, but not more.
  Said troubleshooting couldn't identify the problem.

  When I try and access the Device Manager, I get a "Explorer.EXE" the specified service does not exist as an installed service?

  Help.

  Paul.

  > He sees my router but will not connect.

  I guess that your router is secured by encryption (WEP or WPA / WPA2)
  Test WiFi connection without the use of WLan encryption settings.
  Turn off in the router settings and test the connectivity.

  Of course you need to do that just for test purposes because it s not advised to use the unsecured WiFi.

  Where you have no problem to connect the laptop to 'open' WLan, I recommend changing the encryption type.

• Satellite Pro L300-156 - WLAN connection drops every 12 hours

  Hello!

  I have a short model "Toshiba Satellite Pro L300-156" (PSLB1E).

  The system state is:

  I used the recovery CD (to install Windows XP and other software on this CD).
  I've upgraded to the latest version of the BIOS (1.50, 10/07/2008) for my laptop and I downloaded all updates for Windows XP.
  I installed the latest WLAN driver for my WIFI (Realtek RTL8187B) card.

  The problem is still there:
  Every 12 hours (exactly on the minute!) drops connections.
  Not only the Internet, but the local connection.
  It is even a kind of matrices.

  Both a connection to a local computer and "mIRC" (ssh/telnet-program) to "PuTTY" (program-chat-IRC) says "network error caused abortion of software".

  These ping connections not, they die instantly in a tenth of a second.

  Hello

  I guess it can be caused by a 3rd third party tool that was installed on your laptop.

  I mean it of really strange that disconnected EXCATLY after 12 hours of use.

  "I have goggled a bit for the message: network error: Software caused connection abort."
  And found that this error is displayed if the Windows network code decides that your network connection is dead. This will happen when you remove the cable network Ethernet-connected computer, or if Windows has any other reason to believe the entire network has become unreachable.

  I think you should check the settings of your WLan router. My router refresh / disconnects after 23,59 hours to ensure that the IP address has changed.

• Satellite Pro L300 does not illuminate

  Hi all, I'm new to this forum.

  I have a Toshiba Satellite Pro L300 and I've had it for about 2 years.
  But yesterday I closed the laptop as usual. But later I went back to it and tried to turn it on. But it does not work. Instead, when I press the power button the LED next to the battery symbol flashes orange/orange 6 times and then turns off.

  Can someone tell me what it is? I tried to let it load, but that has not worked. The amber light is the only light that flashes. It does not recognize that I plugged in the charger and I don't think that the battery was flat. So I'm angry and helpless right now.

  Can someone help me please?

  See you soon.

  Hello

  There are several indicators;
  DC, while running, the main battery, LED HDD/ODD.
  So I guess the power LED flashes in orange. Right?
  This means that something was wrong on the motherboard.
  Maybe power supply electronic malfunctions

  In this case, there is no much to do only mobo replacement could help to...