Satellite Pro L300 will not start

I have a portable Satellite Pro L300 and he won't start (in other words the power button and not going not past the first screen).

Works for keyboard, but F2, F8 or F12 will not do anything, I can't here the disk hard powerup but it's like no one is at home. I don't know if it's the motherboard or the onboard battery. The computer is about 7-8 years

Can anyone help.

It s certainly nothing wrong with a RTC battery (as you said internal battery).
The RTC battery can be charged. The unit must be turned on and adapter must be connected at least for about 18 hours.
But I guess that this isn't a problem.

The laptop does not start because of a hardware malfunction, but it's hard to say what role may be affected. But you should absolutely consult the RAM modules.
This should be the first step, since the RAM modules are easy to replace.

All other parts should be checked by the type of service.

Tags: Toshiba

Similar Questions

  • Satellite Pro L300 will not start after the Bios Update

    Help please.

    I simply formatted laptop Satellite Pro L300.
    I used all the drivers updated Toshiba and everything is fine.

    I then updated the bios with the latest version.
    After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

    The ides welcome

    Hey Buddy,

    What start menu, you mean?

    I put t understand how it is possible until you wrote that your laptop does not start?

  • Satellite Pro L300 will not start - cannot get into the BIOS

    Dear,

    I got a satellite Pro L300, width a HARD drive partitioned, with Win XP installed C and D with Windows 7 installed, the problem is the following:

    Days when I turned on my laptop, the OS splash screen appears, stop boot on Toshiba logo process.
    In addition, I can't enter the BIOS with the F2 key or the Boot Manager by using the F12 key.

    Help, please.

    > stop boot on Toshiba logo process
    This means that the laptop can not pass the POST (power on self test) properly and it would mean that a hardware problem has been detected on the motherboard.

    Remove one of the modules RAM (check both) and try to turn on using a single module of RAM.
    It is possible that one of the RAM modules is defective

    It would also be possible that the motherboard is malfunctioning, as you can see, it is hard to say what role could be wrong, but what looks like a serious hardware failure

  • Satellite Pro L300 will not start until after the update of the BIOS of 1.30 to 1.50

    Dear all,

    I have a Toshiba Satelklite Pro L300 and had no problem for the last 4 years. Last Monday, I replaced my hard drive with a new one and after installing a new copy of Windows XP Pro, I have downloaded all the drivers on the official site. After my last update, I have updated the BIOS to version 1.30 to 1.50. After a few seconds my laptop has rebooted and was not able to load Windows and / or recognize my new hard drive.

    I tried several methods, using safe, optimal Bios default etc but was unsuccessful. IO could not even re - install Windows as the hard drive is not being recognized by the laptop. I've formatted the HD again through my desktop Pc, but still have the same problem.

    I am really worried and would like immediate help!

    Best regards

    Engelbert

    > I formatted the HD again through my desktop Pc, but still have the same problem.
    What happen exactly when you turn on your laptop?

    Set the BIOS as deult and try to install the original recovery image that you got with your laptop. If everything works OK that means upgrading the disk HARD was a success and there is not a serious hardware problem.

    After this check, you can try again to install Windows XP Home edition.
    Please post comments.

  • Satellite Pro L300 - does not start form DVD

    Problem: my Satellite Pro L300 will not start no optical drive (DVD)

    Leisure problem scenario:

    Insert the DVD Toshiba recovery in optical disc drive,
    Restart and during the boot prompt, press F12 and select the optical drive.
    Black screen and the cursor flashes in the upper left corner... after the seconds flew L300 starts to beep loudly. No message on the screen.

    Reports of BIOS version 1.50 while the latest version of the BIOS update on the web is to 1.40...

    Model No.: PSLB1E-02200GG3
    Serial 78685377Q

    I'm doing this because I want to change the OS from Vista to XP.

    Hello

    Stand by. You mean you are using a Toshiba original WXP for Satellite Pro L300 recovery CD/DVD or what?

    Have you tested with any other CD bootable (Linux)?

  • Satellite Pro M10 will not start again and comes up with the error message

    My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
    The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

    What can I do to get the notbook again reboot?

    Hello

    Seems that there are problems with the files of GoBack.

    Try to boot in safe mode and remove the Norton System works from your laptop ;)
    If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

    Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

    Good luck

  • My new Satellite Pro L300 will not work

    I bought a new Toshiba Satellite Pro L300 on eBay. I connected all the cables according to the installation guide. At first he asked my details, then I logged in and it went to a pages where he says he was preparing. Then I was sent to the newspaper in the section, and the same page appeared saying that he was preparing.

    After what happens about 5 times, he went to a black screen where the only thing I could see was my mouse cursor.

    I closed and restarted, I tried to go into the settings using F12. I was not able to work at all, no matter what I do.
    Unfortunately, I don't have a CD of the OS, but it was announced as having Vista as OS and have Microsoft Office Suite on him as a built-in wireless modem, so it was supposed to be ready just to turn it on. Well I can't even turn it on.

    What should I do? How should I do?

    At first, I must say that F12 has nothing to do with all the settings.
    At this point, I recommend using the new operating system installation using the HDD recovery procedure.
    How to proceed as a result of this document, you can find > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

    When the OS is installed and started up properly first thing you need to do is to create the disc of recovery facilities. "You can do it using preinstalled" Toshiba Recovery Disc Creator. The shortcut is placed on the desktop.

  • Satellite Pro L300 will not answer F2 to enter the bios

    Hello
    one of my clients sent me to fix a toshiba Satellite Pro L300...
    Windows completely froze so they are off which makes windows unbootable.

    im having the problem now is that pressing F2 does not enter setup and F12 does not display the start menu.
    is there another key that I have to press on as well as F2 in the Fkeys allows access to bios?

    Thanks in advance

    Hey Lodore, that of great! :)

    Thank you for your comments.

  • Satellite Pro L300 will not connect to Wifi after hibernation

    Hello

    can someone there help me please?
    I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

    The only way to do it is to restart the pc.

    Any suggestions?

    Hello!

    I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

    In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
    http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In addition, you run the factory settings or you have installed a different version of Windows?

    Good bye

  • Satellite Pro L10 will not start the system

    Hello!

    I have a Toshiba Satellite Pro L10, which won't work for some reason any.

    The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

    It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

    There is also a 30 second countdown if I do nothing the portable samekh automatically.
    It is, none of these things work.

    Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

    He did about 50 times now and still nothing.
    I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

    Help, please!

    If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

    hope this makes sense and I gave you all you need to know.

    Thanks, B

    It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
    If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

    In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

  • Satellite Pro L500 will not start on battery only

    Hello!

    I recently bought a Satellite Pro L500 and have the following problems.
    My laptop does not start on battery only. The Green led comes on and stays with the laptop in a gel (nothing appears on the screen).
    The only way to get this light off is to remove the battery.

    Starts EVERY time with AC power connected (with or without battery)-normal lights are displayed when connected.
    Works quite normal, once started - with or without power connected

    SOMETIMES starts with the battery only if I boot in a short time after I've used the laptop
    I tried the static release process but does not work. (hold button power supply without battery or power supply connected etc..)

    After having this problem, I've updated to the latest version of the BIOS but nothing helped
    Tried a different battery and did not help
    Is a Toshiba Satellite PRO L500 T4400 4GB 15 "laptop Win7 - only 3 weeks or so old

    Very annoying!
    Please anyone with a solution?

    Hello

    Try this.
    Remove the battery, disconnect the adapter and then wait a while. I would like to leave it disconnected for about 12 hours.
    Together the two parties again, charge the battery and then remove the power adapter.
    Then try to turn on the unit using only the battery.

    If that does not help, then you should get in touch with your ASP as fast as possible since the guarantee is valid and would cover all the checks of the equipment and replacements.

  • Satellite Pro L10 will not start - the LED blinks

    I have a pro l10 phone which, after sutting down as battery not return to life. All I get is 8 flashes on battery led when the button is pressed. It's the same area only, battery only or both.

    It sounds bad
    Generally, the laptop LED flashes as there might be a hardware malfunction.
    The LED provide a microcode and the technician can read this code.
    A common user is not able to read. OK maybe you can read it, but you will not find any description about the meaning of the code.
    That is why it s a good idea to contact the technician in your country

    But as a first step, try this:
    Remove the battery and unplug the AC adapter.
    Wait 20 - 30 minutes and then plug in the battery and plug in the AC adapter.

  • Satellite Pro A100 will not start!

    Hello

    I am having trouble with a Tosh. Satellite Pro A100 (model: PSAACE).

    The laptop was acting kinda funny for the last week (turned off on its own, saying that it is running on battery when pluged) then today he has decided to power off on it's own and does not restart.

    Having checked it of get out the power supply, have tried with and without the etcetc... This battery with no luck...

    When I press the power button the only thing that happens is the symble of battery next to her light flashed orange 11 times (same lengtht flashed
    SS each time).

    Can anyone shed light on what is wrong with it? Or what this error on the battery light code is trying to say?

    See you soon

    Matt

    Hello

    > When I press the power button, the only thing that happens is light with the symbol of the pile beside it flashed orange 11 times (same length flashes each time).

    Hmm I think that it s a hardware problem. I would say that this s a motherboard problem.
    Is the motherboard provides and flashing, error code.
    This only happens if a serious hardware problem has been detected

    Unfortunately, only the ASP can read this code and may know what this code means but certainly must be a hardware problem.

    In this case an ASP is your last resort.

    Good luck

  • Satellite Pro A60 will not start up CD/DVD

    I have the above and it does not start from cd/dvd. I know that the cd/dvd is bootable and works well. I can boot from the floppy drive and access the cd/dvd without problem, but that dose not allow me to load windows XP. If this is not the drive or the cd/dvd. So what is the problem?

    Paul

    Hello

    How did you try to boot from the CD drive?
    Have you tried to press the C key immediately after starting the laptop?

    Alternatively, you can press F12. The start menu should appear and you should be able to choose the drive as a boot device.

  • Satellite Pro A120 will not start

    Sorry for the bad English!

    My computer does not start.
    I want to install a BIOS but plugging it into another computer, but I don t know how?

    I think it s not a faulty BIOS, but I think that the virus on your laptop caused this problem.
    The error message says it all:
    + Malware accesses the memory read +.
    + bios problems +.

    If you are not able to boot up the laptop, or on the CD recovery, (XP, Linux) bootable CD or HARD drive, then it s a serious problem and you should certainly contact the ASP in your country.

    If you are a lucky man then the ASP technician would be able to flash the BIOS ROM by using a special procedure and the laptop should work again.

    Good bye

Maybe you are looking for