Satellite Pro L300 - windows xp does work on my laptop?

Similar Questions

• Satellite Pro L300 Windows 7 Upgrade - DVD player no longer works

  Hello

  I upgraded my Satellite Pro L300 Windows Vista to Windows 7 a few months back, now, I noticed the Player DVD no longer works! All ok in Device Manager, but the habit of reading anything.

  I have use a Toshiba Windows 7 upgrade disk that could be my problem. I used the Windows 7 Upgrade Advisor and Windows 7 Ultimate disc.

  I tried to download and install the latest Windows 7 32 bit DVD Toshiba drivers but still no joy.

  Can someone advise procedure I should follow to correct, if I need to downgrade back to Vista, hope not!

  Thank you.

  Optical disc drive is properly listed in Windows Explorer?
  Do you have problems with some specific discs?
  Original music and film discs are readable?

  What player you use to watch movies?

• Satellite Pro L300-PSLB1E: XP does not control the wifi to the power connection

  * + Hello + *.

  I have a model Satellite Pro L300-PSLB1E and a XP Professional SP3 on it.
  Already everything works because I had a compilation of drivers copy of the past.

  The problem is that XP does not control the WiFi works without danger the and it disconects when I close the lid.

  So I tried with the power that said safety program to:

  Bq. [06/04/08 Power Saver Toshiba Windows XP 7.04.02I | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpwrsav-es-20080519173239.zip] + doesn't work-error 0 x 0 +.
  And I tried also with the thought of program Toshiba wifi on 32-bit compatibility:
  Bq. [Intel PROSet/Wireless Software | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpro-ncs-20080416140552.zip] + doesn't work too-Said controller is not installed when you and full work +.

  So, how to control the peripheral power turn off on?

  Bq. * + thanks for your attention and patient. + *

  Hello

  Firstly the Toshiba Power Saver requires the installation of the common Module.
  The common Module for Win XP v1.00.05 can be downloaded from the European pilot page Toshiba.

  So before installing the energy saver, install common Module, restart the computer, and then try the energy saver.

  In addition the Intel PROSet/Wireless Software can be used only with the Intel Wlan card.
  Is the laptop supports the Intel wireless network adapter?

  AFAIK the L300 series can be equipped with a Realtek, Atheros and Intel Wlan card
  Check it!

• Satellite Pro L300 - sound is not working properly

  Hi all!

  Last week, I bought my Toshiba Satellite Pro L300.
  I have had no operating system with the laptop, but I had my own XP, so I changed the SATA drives in compatibility mode and installed windows XP Pro.
  (By the way this is a Vista laptop officially)
  I installed all the drivers, but I have a problem with the sound. It has a bad quality, but this isn't the biggest problem.
  If I start listening to music, the sound stops every 3-4 seconds for a fraction of a second. It's as if the processor worked (like the computer was loading, and the processor is a bit overloaded) I usually have this experience if I run many programs simultaneously on my old computer, it slows down and the music stops for a second. But on the new laptop, I run winamp, I have dp nothing but listen to the music, and I get this problem.

  Can anyone help? Is it because of XP? Or the driver does not work properly? Or I have a big problem and should go back to the store?
  Please write!

  Hello

  Did you notice HARD drive activity when this happens?
  Maybe some anti-virus works in the background.

  Maybe you can order original Toshiba recovery DVD for your laptop model. Check it out under the https://backupmedia.toshiba.eu/landing.aspx

  Using WXP only? I ask this question because I believe that you can only get to this Vista laptop.

• Satellite Pro L300 - mode 'sleep' does not work correctly

  When I close the lid on my laptop it indicaes which is mode ensures by flashing of the green light but when I lift the cover upwards, it is said that windows were not close correctly.

  I checked all the settings and they seem ok. What could be?

  Hi Lop,

  What settings did you check exactly and what operating system you are using?

  I have the Satellite L300 and Windows XP. I m using TOSHIBA Power Saver and here I can put what happens if I close the lid, press the power button / stop, etc..
  Check it!

  In addition under XP check TOSHIBA Power Saver profile is selected in the Windows power options.

• Satellite Pro L300 - Windows does not start

  Silly person I am, and being computer illiterate I turned off my laptop while it was downloading updates.
  Now when I turn it on it shows a black screen with 2 boot options.
  1 to start repair/restore mode,
  1 to start windows normally but does not work.

  I made the recovery discs after that I bought the laptop, but I am wary about its use.
  Although I don't do a lot of work that needs to save, I only surf the net and make emails.

  There are other safer options for marketing?

  Hello

  If you have any important data on the HARD drive you can use the recovery disk to reinstall the OS again and set up the device to the factory settings.
  The recovery disc will format the HARD drive and erase everything from the HARD drive.
  The installation process does not take long, you need to boot from the recovery disk and having to follow the instructions on the screen. All that s!

  Welcome them

• Satellite Pro L300 - wireless card does not work under Ubuntu

  Hi all,

  I want to know what is the model of my wireless card. I need to know because I need the driver of windows for Ubuntu. I see on the internet for the L300 series, we have a lot of wireless card... I want to know what is the card of my pc.

  Thanks a lot and best regards

  LOL: D you're funny type. Please don t do it harder they are.

  There are many opportunities to find out what card WLan has been inserted.

  The easiest way is to check the bottom of the unit.
  There are a lot of different labels and on one of the labels you should see a WLan card model or part number.
  Take this number it in the google search and google for this field.

• Satellite Pro L300 - WLAN connection stopped working

  FN + 8 indicates that the wireless is as shown in the icon but suddenly tonight the connection failed while I was looking through internet and I can't get it back.

  I have reset the modem - the laptop is connected by ethernet cable to a modem, even with a good connection. The laptop is around the age of 16 months and is currently running Windows 7 Pro. I've updated all the drivers tonight, but even if it is 'on', it does not work.

  The usb wireless modem will dig tomorrow, but I wonder if the card has abandoned :(

  null

  Everything is possible. Wireless network card appears correctly in the Device Manager?

  In any case if you can use the WLAN USB stick it will be probably easier and quicker solution for you.

• Satellite Pro L300 - 1AD Touchpad not working not

  Have inadvertently disabled the touchpad.
  How can I activate it please?
  Have reinstalled the touchpad drivers, but no joy.
  FN + F9 does nothing.
  Using Windows 7 pro 32-bit.

  Hello

  The touchpad can be activated in Control Panel-> mouse-> device settings
  In some cases, there might be a tab named touchpad ON / OFF

  However, take a look here it should be possible to activate the touchpad somewhere in the control panel of the mouse.

  Welcome them

• Satellite Pro L300 - CD/DVD does not appear on my computer

  Hello! This is probably a silly question / easy but I am very new in this and... my CD/DVD unit does not work.
  It does not show on 'my computer' and when I insert a disc, nothing happens (with the exception of a humming noise but then nothing)...

  Please can someone help me?
  As the helpline does not respond on Saturday...

  Thank you very much!

  Hello

  Try this;
  Go to the Device Manager and remove the drive from the Device Manager list CD/DVD.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and check again.

• Satellite Pro L300 will not connect to Wifi after hibernation

  Hello

  can someone there help me please?
  I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

  The only way to do it is to restart the pc.

  Any suggestions?

  Hello!

  I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

  In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you run the factory settings or you have installed a different version of Windows?

  Good bye

• Satellite Pro L300 - may not always connect to the same strong connection router

  I currently have a Satellite Pro L300-155. At work, the WIFI signal is strong everywhere where I am in the building because we have 2 WIFI connections. However, I can connect okay in 1 room but if I just go in the other room, I'm unable to connect - and the connection is still strong. This also happens intermittently at home.
  Is it of diagnostics that I can run on the Toshiba to test wifi?

  Where can I find what chip it is? Where is the wifi location - on a motherboard, etc?
  Can it be replaced and where I could quote from?

  Thanks in advance

  Hi cooky44,

  In my opinion, you should update the routers firmware and update your WLAN driver.

  Furthermore, I have created an interesting document on improvements to WLAN connection:
  [WiFi: improved reliability of connections | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=68]

  Also check the forum similar topics WLAN.

• Satellite Pro L300: BSOD after updating BIOS

  Hello

  After updating the Bios of the Satellite Pro L300, windows will not start!
  His show the blue screen of death!

  What can I do?

  Hello

  You are able to access the BIOS settings?
  I m not very well why this BSOD appears, but eventually the SATA mode settings have been changed after the BIOS update

  Usually the SATA mode must be on AHCI if the SATA drivers are installed.
  But if the SATA drivers are not included the SATA mode must be set to compatible.

  Please check this!

  In addition, you could set the BIOS default settings and may try to start the computer again.

• Re: Satellite Pro L300 - how can I reset the BIOS password?

  I put the password on the BIOS and electric start and I forgot the password.
  How can I reset the password?

  I have a Toshiba Satellite Pro L300.

  You must bring the laptop to an authorized service center to remove the password.

  Which country are you? Check your local Toshiba Web site for a list of the ASP (service centres).

• Satellite Pro L300 - touchpad does not work

  Hi all that I need help urgent because it drives me crazy. First of all, I use XP PRO. My laptop is fairly new, only around the age of 4 months, I had no problem with it at all. I formatted my laptop yesterday and reinstalled all the drivers that I downloaded here:

  http://www.ISD.Toshiba.com.au

  and everything works fine except the touchpad. I have already installed shared, utilitarian toggle the touchpad Module and I have the latest BIOS installed and reset all default settings and I made sure that the touchpad is enabled in the BIOS, but also pressing FN + F9 to enable during Windows.

  I installed the latest touchpad driver Synpatics I downloaded from the homepage of Synaptics. But for some reason any, that it does not work, I don't know what is the problem here. My touchpad worked before I formatted my laptop, it worked fine and has never had any problems. Will you please tell me what is wrong because I need to use my touchpad sometimes as well, so I can't use a mouse all the time.

  Hello

  > I installed the latest Synaptics touchpad driver that I downloaded from the home page of Synaptics
  I think that you question refers simply to the driver for the touchpad that is missing or incorrect.
  I put t know how it works on Toshiba notebook Australian, but the Toshiba European Satellite Pro L300 units needs touchpad different drivers. some use the Toshiba touchpad driver and some units need a driver for the Synaptics touchpad.

  In your case, I recommend this controlled again.

  By the way; My touchpad is always disabled so that en external mouse is connected.
  It is parameters that control it. Please check in your touchpad properties too!