Satellite Pro L300D: Cannot install because of the common Modules control utility

Hi guys,.

I'm new to this forum, but I spent two days looking around.
I have a sat Pro L300D that I'm downgrading to XP, because many are, and I can't get the touchpad to work or function buttons.

One problem seems to be to install the utility 'controls', which gives the message "common modules" not installed even though it was the first pilot, I have installed.

Does anyone have any suggestions?

OK, here we go.
Toshiba pilot European page doesn't provide drivers XP ALL, tools or utilities for the Satellite Pro L300D.
Is this good? I checked the page and there are no. XP applications.

So I came to the conclusion that the common Modules cannot be installed because this software was not designed for this series of portable and therefore, you receive this error message.
It is clear!

So Don t wonder what impossible to install "utility controls" or common modules. These pieces of software are not compatible

Tags: Toshiba

Similar Questions

  • Satellite Pro L500 - cannot install the Realtek LAN driver

    Hi all

    I got a Satellite Pro L500 Windows 7 pro with disk created from computers, cell phones, but now cannot install a Realtek LAN driver for the laptop.

    The installation of the driver software program doesn't seem to work properly all the time, tried several times to install with only once a realtek 'repair' option becomes available.
    When I managed to install the driver I got an error "the device couldn't start. After restoring I also had problems with a "controller driver simple communication PCL.
    which seems to have been an Intel MEI according to the SAT, DEV info displayed in the information systems.

    If these problems are linked and how to install the driver required in an automated system if the system does not correctly detects hardware?

    Hello

    I m not owner of the Satellite Pro L500 but have you ever tried to install the latest driver Realtek LAN official site of Toshiba?

    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Check this box!

  • Satellite Pro A200 cannot install the driver of storage on an unattended installation

    Hello

    I created an image of XP RIS for a Toshiba Satellite Pro A200 and have downloaded the correct drivers for this laptop.

    I scoured internet solutions on how to configure the .sif file and where to install this driver on the image that he won't seek the intall the storage driver so that it can not find the Sata HD to install the image.

    Everyone knows that before and if so please could you point me in the right direction I've been struggling with this for a few days now!

    Thank you

    Hello

    You must include the SATA drivers.
    The SATA drivers are part of the Intel Matrix Storage Manager, which can be downloaded from the Intel and Toshiba page page.

    Here's a nice instruction how to do this:

    + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
    http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  • Satellite Pro M70 - cannot install the Driver of Toshiba Power Saver

    Hi, I can not install driver of toshiba power saver on my laptop because instalation crashes with error 1610: the configuration data for this product are damaged. Please contact the support staff. I tried several versions of driver of standby power. I received the latest official chipset driver... Someone knows how to fix this?

    My second problem is with the battery, my laptop running on battery max 10 minutes (I have my laptop for 2 years) and I often force using battery power. Battery can lose so much capacity in 2 years even if I used for my battery once a week?

    Sorry for the English and thx for answer

    I think that you should not install this driver, the only saving electricity only.
    What about the battery? In my opinion, it is possible. In my opinion, the duration of battery life cannot be defined so easy.
    Some batteries perform well after 3 years of use, and some of them are dead after only a year.

  • Satellite Pro A100 - cannot install display driver

    I am updating a Satellite Pro A100.
    I downloaded the update of the display driver but can't install it because it say its longer 88 charicters.

    Anyone has any ideas, tips or suggestions please?
    My goal is to alow the user to be able to play Sims 2 if it is possibe, because I know that some video cards do not support the game (or whatever it is).

    Hello

    I assume that you have downloaded the zip package.
    Rename the package for example in "display driver" and then uncompress the package.
    Then go to the folder where the driver was decompressed and then launch the installation.

    Can you do this?

  • Satellite Pro A120 - cannot install recovery disc

    Hi - I have a Toshiba Satellite Pro A120 PSAC1E-04H00VEN model number

    It was less his hard drive and I posted previously to try a 160 GB drive without success. I thought that the drive may be defective, so I have now acquired a 120 GB drive. It is not new, but assured me that it works. However, it does not work in this laptop! As before (with the disk 160), when I try to install it using the Toshiba restore disc, the operation just sticks on the "Please wait..." message. "for 30 minutes then the machine shuts down. Assuming that the hard drive is ok there at - it something more, that I can do to determine the problem with this laptop?

    FYI, this is what happens after installing the hard drive:
    I turn it on and get this message: NTLDR is missing. Press Ctrl + Alt + Delete to restart.
    I insert the product recovery disc, put off and then again when you press F12.
    I get a soft Purring over the Toshiba logo. I select the CD/DVD symbol and get a short message saying: the installer inspects the hardware configuration of your computer.
    I then get RAMDISK image loading... which takes less than 2 minutes.
    I then get a short message saying: from Windows Preinstallation Environment. Press F6 if you need to install a third-party RAID or SCSI driver...
    I then get it please wait... and after 10 seconds, the fan goes into overdrive! This Carry on during 30 minutes with him please wait... message, then the laptop turns off automatically.

    Any ideas anyone?

    Thank you.

    Hi Lapitup,

    Before you buy another HARD drive, you need to test a different installation disk you have already tried the two hard disks with the same problem so I think that the problem is not HARD drive itself

    If you have a normal installation disc of Windows, you can install Windows on this drive. So you can check if the recovery disk works properly or not. Theoretically, the disc could be wiped off so that the files cannot be read properly.

    In the worst cases, some of the material is affected. Then, you need professional help of an authorized service provider.

  • Satellite Pro M30 - cannot install audio driver

    Hello

    I have a Satellite Pro M30 which usaed work properly but I can install more drivers sound card is on.

    I think it happened because we have reinstalled windows XP Pro with SP2, but may not be some.
    He is installing drivers Sigmatel AVC97 and comes up with the following error.

    Parameter invalid operating system or this installer does not support this operating system

    Any suggestions because it does appear that a driver for the family of SPM30.

    Hello

    Try to install the driver using another medium facility.
    To DO this in the Device Manager.
    Mark the sound card and use the option to update the driver.
    Then, use the advanced option and indicate the location where the driver audio was stored on the HARD drive.

    Please note; You must decompress the audio driver package before installing

  • Satellite Pro U400 - cannot install VAP on Vista 64-bit

    Hello
    Since I bought 4GB of RAM for my Satellite Pro U400 PSU45E, I installed vista Business 64-bit, with all drivers and bios 64 bit found on the toshiba site.
    easy, with the exception of the "value added package 1.1.19", whenever I try to install I get: error "failure of GetProfString."

    I installed every driver and utility for 64-bit, but still the same...
    Everyone has experienced with this?

    Without VAP, I can't use the Toshiba power saver, worst profiles I can't go back because I did a new install and deleted the recovery partition!
    Please, someone help!

    Hello

    VAP contains all the modules necessary and you n t need to install other tools in order to install VAP
    I think that it s a Vista may issue you should do a clean install, then you must update the Vista for the last State.
    After have installed all the patches Vista, try to install VAP and other tools.

    Good bye

  • Satellite Pro L20 - cannot install Windows XP

    Hello!

    I discovered this great forum and wanted to try my luck with the following problem. Any help at all is greatly appreciated!

    I do a clean install of Windows XP on my Toshiba Satellite Pro LP20. I don't have the original Windows XP cd that came with the computer, but have you tried many (legitimate) copies of Windows XP with the same result:

    The first step of the installation works fine, IE. files are copied from the CD to the hard drive and the computer restarts once the process is complete. However, during the restart to calculate, is wrong on the second phase of the facility (where continues the installation of windows XP graphic), but goes back to the DOS file copy process. This means, even if the files have been successfully copied from the CD to the hard drive, the computer does not recognize that there is a current operating system.

    The problem is not in the boot order, like the HARD drive is my number 1 option, and tried without the installation Cd in the drive. In this case the computer says only: "no operating system found".

    Where is the problem? Is this a problem of motherboard BIOS, or do you recon that the HARD disk is somehow broken? I know that the problem is not in the XP installation CD, because it works fine on other computers.

    Thank you!

    It's not easy to say what is the problem and what are the causes of the problem.
    You can try another drive to install Microsoft?

    In my opinion, it could be a problem with the HARD drive. Then you should check this with the Drive Fitness Test.
    Google for this test, it of quite easy to use.

  • Satellite Pro A200 - cannot install Windows 7 cause lack CD/DVD driver

    Hello, I have a Satellite Pro A200, PSAE4E-046018N5 and I am trying to install Windows 7 but I can't go to step one because it is not found a driver:
    A message box saying: required A driver of currency for the CD/DVD drive is missing. If you have a driver on floppy disk, CD, DVD, or USB flash drive, please insert it now.
    -What to do?

    CD-ROM is a HL - DT - ST DVDRAM GSA - T20N ATA, the actual driver have version 6.0.6002.18005 (date: 2006-06-21)

    Best regards
    /Peter

    Hi Peter,.

    Try you to an upgrade from Vista to Windows 7 at the moment? If Yes, please try a new and clean Windows 7 installation. It work?

    Another question: your CD/DVD drive works properly or it appears with a yellow exclamation point in Device Manager?
    In your case, I would try to remove the drive from Device Manager, then restart the laptop. After that the drive will be recognized automatically.

  • Satellite Pro L40 - cannot install Windows XP

    Material: Satellite Pro L40, HDD 80 GB, 1.5 GB of RAM

    Software: Windows XP + SP2 install CD, floppy disk with AHCI HDD ICH8M_32bit drivers drivers created according to the instructions in "how to install Windows XP on a L40.pd"f of Toshiba (which is pretty outdated by the way!)

    Problem: The start is fine, after pressing F6 quick to add drivers is very good, set up windows starts.
    Then I get this message on the screen: insert the disc labeled "Intel Matrix Storage Manager" in the A: drive. Press ENTER when you are ready.
    This is not mentioned in the installation instructions.

    Well, I don't have a disc labeled like that. I only have the disk that I created according to the instructions in the PDF above.
    It is already in the drive, so I press ENTER and nothing happens.

    My only other option is to quit smoking. Tried to quit smoking and going through the whole process several times - always eventually return to this impasse.

    (sigh)

    Can anyone help? Please?

    I think that you have made a mistake, because I never have problems to use the SATA drivers.
    Have you tried to do the floppy drive with the drivers and where did you download the drivers? Maybe you should try to download again on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    And have you tried to create your own with the drivers installation disk? You can do this with nLite for example. I prefer this because that is why I n t need an external floppy drive.
    It s worth a try! ;)
    [www.nliteos.com]

  • Satellite Pro P200: Cannot install Server 2003 - parity memory error

    I have a Satellite Pro P200 and to the work required to install Windows 2003 server on it, but all I get is an error message:

    -Hardware malfunction

    Call your provider of support material

    NMI: Parity check / memory parity error

    -The system is shut down

    I checked the memory and everything seems OK. Vista runs very well on it, and all memory is recognized. I tried different flavors of Server 2003, although all I need is standard edition. Anyone who has met this problem, or someone has any suspicion as to how I can get it operational.

    So, how tested the RAM? With Memtest? Or Prime95?

    I read in many forums that people work servers (no laptop...) SERVERS) that correctly work 1 year with ECC memory, then windows 2003 server gives the same error message you have.

    I mean if Vista works flawlessly and you checked as you say the RAM while there could be a mismatch which must not be for lack of toshibas.
    Maybe you should try a linux ubuntu server edition, which works great on almost * ALL * systems, even on systems with faulty CPU/memory (Ok, ok, not 100%, but it works, I got this case :))

    So, maybe you can try to exchange the RAM, but if you're still the same error then ask microsoft or try another P200, if they are available.

    Sorry dude, but I Don t have a lot of ideas in your situation :/

    Welcome them

  • Re: Satellite Pro C50 - cannot install Windows 8

    Hello.

    I have a Toshiba Satellite Pro with Windows 7 preinstalled c50.

    It comes with 2 DVDs containing Windows 8.
    I tried to upgrade to Windows 8 (following the instructions included in the Manual: BIOS change, etc.), but I can´t install it.

    After booting from the DVD, it doesn´t appear the installer of Windows 8, Windows 7 recovery options.

    Could you please help me?

    Thanks in advance,

    Sergio

    Hello

    I assume that you have followed the solution step by step, as described in these documents:

    [Guide to upgrade Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2A03EJ0001R01.htm]

    [Update Installation of Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2A03ER0000R01.htm]

    [Windows upgrade 8 - Notes and Restrictions: http://aps2.toshiba-tro.de/kb0/TSB2A03EL0000R02.htm]

  • Satellite Pro A100 - cannot install audio driver

    Hello

    Hope someone can help, I can't get an audio driver to work, I tried some different drivers now and none seem not to work.

    I tried all the drivers on the Toshiba driver download site with no luck. I always left with a yellow question mark in Device Manager. (Satellite Pro 100) During installation, the window I have instull MICROSOFT BUS DRIVER BEFORE this r audio (Realtek HDA for XP).

    Where can I get this driver (Appreicate if someone could point me in the right direction), or can someone give me another piece of useful advice?

    Appreciate any help

    Thank you.

    I think that this is a known issue.

    Sometimes it s useful to search the Microsoft Knowledge Base. There, I found these interesting documents:
    http://support.Microsoft.com/kb/835221
    http://support.Microsoft.com/kb/888111

    It is very important to install these patches before you install the driver.

  • Satellite Pro A10 - cannot install Intel graphic driver

    Hello

    I m wondering I ve been on the Intel site to get the disc for my graphics card that Toshibas is old Intel have a 1 latest release for my view controller and when I download and try to install it, it says cannot continue please contact the manufacturer of your computer.
    Can you help me please because there must be a way to get it?
    Thank you

    Hello

    As a general rule, you should always use the Toshiba drivers because they are specially designed for these graphics cards.

    Good bye

Maybe you are looking for

  • Still stuck on Firefox 8.0 on channel 11 December 2011

    Still stuck on Firefox 8.0 on channel 11 December 2011; I thought 8.01 was released on November 28, 2011. No idea why I would still be a 8.0 when several of my systems updated as it should (end of November)? Could the old built in video (VIA / S3G Un

  • error 200141 on parallel angular measure

    I've been browsing the pages of discussion about this error, but so far the proposed resolutions have not worked.  I have included my highest level as well as the necessary Subvi VI in a zip folder.  On the schema of the structure BUSINESS here is "R

  • NS view

    I've pulled up the nslookup and have psg.lithium.com as a response of authority server home portal, no, psg.lithium.com, and address is 208.xx.xxx.xxx.xxx, Im not computer smart, is this normal? It sounds good does'nt! Why the two addresses are diffe

  • Problems of redundancy PowerConnect 7048

    Hello! I recently put in place a network I have a problem with and need someone to go through my configs of switch and tell me if they see something that I did wrong. The network consists of a blade M1000 - filled completely, Equalogic 2, 2 Powerconn

  • GroupDataModel and append()

    Hi all Why we can not do append() in a GroupDataModel? In some cases, it would be more useful than insert()... I have to make it difficult to add an item at the end of my list Thank you