Satellite Pro L40: Cannot use special characters in the password Bios

Similar Questions

• Satellite Pro L40 - after upgrade to Windows 7, the FN keys do not work

  Hello world

  I have a Satellite Pro L40 PSL4BE and have just upgraded to Windows 7. Since the upgrade I can no longer use the function key and the top and down arrows to control the volume. Keys F6 F7 & still control the brightness so I don't know the function key still works.

  Anyone know if it is a driver problem or nobody knows how to solve this problem?

  Thank you

  Drew.

  Hello

  You need to install the package of value added for Satellite Pro L40. This package contains all the necessary drivers for the FN keys. Then please install or update VAP if you have already installed an earlier version.
  Here you can download: http://eu.computers.toshiba-europe.com > support & downloads > download drivers

  Can you confirm that FN keys work with installed VAP?

• Satellite Pro L40 - cannot install Windows XP

  Material: Satellite Pro L40, HDD 80 GB, 1.5 GB of RAM

  Software: Windows XP + SP2 install CD, floppy disk with AHCI HDD ICH8M_32bit drivers drivers created according to the instructions in "how to install Windows XP on a L40.pd"f of Toshiba (which is pretty outdated by the way!)

  Problem: The start is fine, after pressing F6 quick to add drivers is very good, set up windows starts.
  Then I get this message on the screen: insert the disc labeled "Intel Matrix Storage Manager" in the A: drive. Press ENTER when you are ready.
  This is not mentioned in the installation instructions.

  Well, I don't have a disc labeled like that. I only have the disk that I created according to the instructions in the PDF above.
  It is already in the drive, so I press ENTER and nothing happens.

  My only other option is to quit smoking. Tried to quit smoking and going through the whole process several times - always eventually return to this impasse.

  (sigh)

  Can anyone help? Please?

  I think that you have made a mistake, because I never have problems to use the SATA drivers.
  Have you tried to do the floppy drive with the drivers and where did you download the drivers? Maybe you should try to download again on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  And have you tried to create your own with the drivers installation disk? You can do this with nLite for example. I prefer this because that is why I n t need an external floppy drive.
  It s worth a try! ;)
  [www.nliteos.com]

• Satellite Pro L40 does not start after changing the BIOS settings

  Changed some settings in the bios last night and now when I boot I get a screen black lights flash and hard drive lights up but nothing on the screen.

  There is no password on the bios... How would a BIOS reset to normal?

  I put a windows disc now, I hear the disc spin but nothing on the screen

  (I think that I have come to the right place on the forum)

  It s a Toshiba Satellite Pro L40 model psl4be.

  Thank you

  > There was no bios password... How would a BIOS reset to normal?

  You can set the default BIOS ONLY inside the BIOS access BIOS by pressing F2 or at the beginning of the initialization of the order

  But I doubt that this problem is related to the BIOS.
  Maybe it s just a simple bad luck that this problem happened exactly after change something in the BIOS.

  Try connecting an external monitor and check if you can see something on the 2nd screen.

• Satellite Pro 4320: cannot use PCMCIA card after update BIOS 2.70

  Hello!

  I'm using the Toshiba Satellite Pro 4320 (SP 4320). With the very old BIOS (first) version 1.0, the system has worked well on LINUX (Ubuntu) and Windows XP. So I found the update of the BIOS (latest version on the toshiba Web site). I did update the BIOS version 1.0 BIOS version 2.7.

  Now, I can't use any PCMCIA card.
  Everything works fine, but I can't use two PCMCIA slots.
  The cards will be recognized, but the system says that there is a resource conflict.
  (WLAN/WiFi adapter) PCMCIA cards worked very well with the old BIOS version 1.0, but now it does not work.

  Windows XP says: 'conflict resource' and Ubuntu/Linux said after typing dmesg: "pccard gives wrong answer, for example."

  Please, help me!

  Someone got an older version of BIOS?
  My idea is to 'downgrade' the BIOS BIOS version 1.0 or version 1.x.

  I have to downgrade the BIOS to at least 2. 6.

  Bye,.
  Martin

  Have you tried installing WXP again using Toshiba Recovery CD?
  I mean it's so old model of laptop and I can't imagine that Toshiba will offer this update of the BIOS so long if there is a serious problem with it.

• Satellite Pro L300 - cannot use the 4 GB memory full

  My laptop is Toshiba Satellite Pro L300 model: PSLBDE-003005AR

  I upgrade my memory to 4 GB using 2x2gb PC2-5300 667 Mhz memory. When I installed the memory and I turn on my laptop the installation always pop up. When I removed the 2 GB of memory to do only 2 GB I spend on my laptop and it works.

  I am using windows Vista premium 32-bit edition. I wonder why I do not work with 4 GB of memory. I installed the memory correctly, but it does not work to 4 GB.

  > Laptop is a Satellite Pro L300 PSLB1A - 01 L 019. Lists of the Toshiba Site the maximum memory 2 GB spec however sheets provided with the laptop shows a maximum of 4 GB of RAM.

  This chipset uses this device?
  There are different L300 with different chipsets and different hardware components.
  Some L300 would be able to support 4 GB and some are limited to 2 GB of RAM.

  So if Toshiba says 2 GB are max so it's good and you will not be able to use 4 GB of RAM.

  Welcome them

• Re: Satellite Pro A120: cannot select an option on the recovery disk

  Hello

  I have a Toshiba Satellite Pro A120, which has recently been faced with the "alert: System protection failure! "password:" problem that it turned up on some BIOS password unknown on its own in the middle of normal operation.

  I got that fixed local Toshiba ASP.
  But now, when I was about to reinstall the Windows cos she had slow, the possibility that the recovery media normally give to just format the first partition become invalid.

  In the settings dialog box, the option is always there but it cannot be selected by clicking on it (from the color of the background showing this option not valid currently)... which means that the only selection (selected by default) is format all of the 38 GB... I don't want to do.

  Someone knows what is wrong and how can I solve this problem.

  I assume that you are using Windows XP and the restore CD also contains the XP operating system.
  It s also interesting if this option has worked in the past?  :|

  However, it s really mysterious that the solution cannot be executed and unfortunately I do not know why it happened

  In the worst case, you'll have to back up data from the HARD drive and format the whole HARD drive :(

• Satellite 2450-201: cannot use TV option after the new installation of the OS

  Hello

  I have a laptop toshiba satellite 2450-201.
  I've always had the TV OUT works well with my TV, use the right cable SVIDEO.
  I was able to watch divx movies in my TV using my computer.

  I had to format the laptop and installed windows XP again.
  After that, I can't use more TV-OUT option, so that the image of the laptop could be seen on television, I've always had.
  After that I updated display drivers, but the problem remains.

  Can someone help me?
  Thank you

  Hello

  How do you reinstall the operating system? Have you used the recovery CD?
  Usually after the reinstallation of the operating system from the recovery CD, everything should work properly.
  It is important that you can switch to the TV. In this case, you can use FN + F5.
  If it's not working so I guess that for display devices hotkey utility works or was not installed. Well, the alternative is to pass on the TV via the graphic properties. The TV option, you should find somewhere in the advanced options.

  However, check it and check if you have installed all the drivers.

• Special characters in the password

  Hi, I have chosen a password with caracter special: now @!
  and then, it is impossible to type the character @, so I can't start my machine!
  What can I do?

  Hello
  Sorry, but now you have a big problem. For the BIOS password or supervisor password, it should be used only the following characters: a... z, a.. Z and 0... 9 paper

  Choice of some special characters will cause that the laptop not boot not. In this case, contact your authorized Toshiba Service Provider because the password must be deleted and there is no way you can do it yourself.

• Does not not special characters in the password

  Here's the function I used to apply the oracle password. I can able to use all the numbers, characters, but when I use special as cat (punctarray: ='!) » #$% & ()'' * +,-/ : ; <>=? _';) I can able to use only the characters # when I'm with all the other amazing it gives me an error
  
  
  SQL > alter user u1 identified by nira86 #* wad456j;
  change the u1 user identified by nira86 #* wad456j
  *
  ERROR on line 1:
  ORA-00922: missing or not valid option
  
  
  
  Here's the function
  
  FUNCTION to CREATE or REPLACE verify_function
  (username varchar2,
  password varchar2,
  VARCHAR2 old_password of past)
  RETURNS boolean IS
  Boolean n;
  whole m;
  different integer;
  Boolean IsDigit;
  because Boolean;
  ispunct Boolean;
  digitarray varchar2 (20);
  punctarray varchar2 (25);
  CharArray varchar2 (52);
  
  BEGIN
  digitarray: = "0123456789";
  CharArray: = 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ ';
  punctarray: ='! » #$% & ()'' * +,-/ : ; <>=? _';
  
  -Check if the password is the same as the user name
  IF (password) NLS_LOWER = NLS_LOWER (username) THEN
  raise_application_error ("-20001, ' identical or similar to the user password");
  END IF;
  
  -The minimum length of the password checking
  IF (password) length < 15 THEN
  raise_application_error (-20002, 'length of less than 15 password');
  END IF;
  
  -Check if the password is too simple. A dictionary of words can be
  -maintained and can be verified so does not allow the words
  -which are too simple for the password.
  IF NLS_LOWER (password) IN ('Welcome', 'database', 'account', 'user', 'password', 'oracle', 'PC', 'abcd') THEN
  raise_application_error ('-20002, ' simple password ');
  END IF;
  
  -Check if the password contained at least a letter, a number and a
  -punctuation mark.
  -- 1. Check for the digit
  IsDigit: = FALSE;
  m: = length (password);
  FOR I IN 1.10 LOOP
  FOR j IN LOOP 1.m
  IF substr (password, j, 1) = substr(digitarray,i,1) THEN
  IsDigit: = TRUE;
  GOTO findchar;
  END IF;
  END LOOP;
  END LOOP;
  IF IsDigit = FALSE THEN
  raise_application_error (-20003, 'password must contain at least one digit, a character and a punctuation');
  END IF;
  -- 2. Check the character
  < < findchar > >
  car: = FALSE;
  FOR i IN 1.length (chararray) LOOP
  FOR j IN LOOP 1.m
  IF substr (password, j, 1) = substr(chararray,i,1) THEN
  car: = TRUE;
  GOTO findpunct;
  END IF;
  END LOOP;
  END LOOP;
  Because IF = FALSE THEN
  raise_application_error (-20003, ' password must contain at least one------)
  Figure, a character and a punctuation ');
  END IF;
  -- 3. Search for punctuation
  < < findpunct > >
  ispunct: = FALSE;
  FOR i IN 1.length (punctarray) LOOP
  FOR j IN LOOP 1.m
  IF substr (password, j, 1) = substr(punctarray,i,1) THEN
  ispunct: = TRUE;
  GOTO endsearch;
  END IF;
  END LOOP;
  END LOOP;
  Ispunct IF = FALSE THEN
  raise_application_error (-20003, ' password must contain at least one------)
  Figure, a character and a punctuation ');
  END IF;
  
  < < endsearch > >
  -Check if the password is different from the previous password at least
  -3 letters
  Old_password past IF IS NOT NULL THEN
  differ: = length (old_password) - length (password);
  
  IF abs (differ) < 3 THEN
  IF (password) length < length (old_password) THEN
  m: = length (password);
  ON THE OTHER
  m: = length (old_password);
  END IF;
  
  differ: = abs (differ);
  I'm IN 1.m LOOP
  IF substr (password, i, 1). = substr(old_password,i,1) THEN
  differ: = differ + 1;
  END IF;
  END LOOP;
  
  IF different < 3 THEN
  raise_application_error (-20004, ' password should differ by to)
  (minimum 3 characters);
  END IF;
  END IF;
  END IF;
  -Everything all right; Return TRUE;
  RETURN (TRUE);
  END;
  /

  What version of Oracle are you using? Before 11 g I think only allowed special characters were '_', ' $' and ' # '.

  And 11 g, you need to put the password in quotation marks and must not use comma, backslash or double quote.

• Satellite Pro L650: cannot use Skype - cam and microphone are not connected

  Having problems connecting to Skype.
  It seems that the microphone and web cam are not connected.
  Skype self-test will not respond with the voice test.

  Hello

  Have you checked the Skype settings?

  There, you should check if the right microphone and the internal webcam have been chosen.

  By the way: is the webcam properly recognized in Device Manager?

  You can use the webcam using the preinstalled software webcam?

• Satellite Pro U200: Cannot use TABLET TACTILE power utility

  Hi guys, help me please.

  My computer gives me this error message "'THotKey' recovery failed. "Error code: 0 x 00031402, 0x00000002" and with it, I can't use my Fn key and when I try to open the folder of toshiba, it gives me the same message.

  Could you please help.

  Thank you

  Maiko

  Hello Maiko

  It will be interesting to know since when this error occurs. Try to roll back OS to an earlier time using System Restore tool. Maybe after that that the problem will be solved. If this isn't the case, please post again.

  One last thing: you can also try to install common modules again. You can find it on the download page of Toshiba.

• Satellite Pro L40 - cannot install XP and reinstall Vista too

  I formatted my hard drive to install XP pro.
  And when I tried it didn't work so I tried to re install Vista and it goes to a white screen after stuck in the installation phase complete?

  Any ideas, any help will be greatly appreciated.

  Sorry, but your ad is a bit confusing and not so detailed.
  And you forgot to tell us what phone you have.

  If you try to install Windows XP you an error or something else? I think you forgot the SATA drivers maybe.

  And now try to install Vista with the recovery disk or Microsoft?
  What operating system you want to now?

• Toshiba Satellite Pro M30 cannot use USB 2.0

  I can't use USB 2.0 on my laptop (OS = Windows 2000).
  Where can I download this driver-USD for this Board (Toshiba laptop motherboard).

  Greetings

  Hello

  Have you seen yellow errors such as exclamation points in Device Manager?
  If not, in this case it of not necessary to install all the drivers.
  Moreover, the operating system automatically recognizes the USB ports.

  But what USB device doesn't work? As far as I know if this external device needs more energy than the 500mA so it is possible that the operating system can not recognize this device.
  In this case you need an external power supply for this part or you try to use the USB hub.

  Good bye

• Satellite Pro L300 - cannot use Intel ProSet WLan tool with Win XP

  Hello! I have the same problem. I installed a XP SP3 and I can't use the * Fn + F8 * hotkey to activate the WLAN function on or off. Other Fn keys work correctly. The WiFi network also works, but it can be used by the built-in Windows. Intel ProSet or Atheros programs do not work. It seems "no wlan driver installed. The card is a Realtek 8187 B, downloaded the driver on Toshiba support original site. What can I do?

  > WLan also works, but it can be used by the built-in Windows. Intel ProSet or Atheros programs do not work
  If the WiFi works fine using the windows zero configuration then the WLan adapter is enabled and don t get the FN + F8.

  The fact is that your 3rd party WLan configuration tool doesn t work because your wireless network card is * Realtek! *

  Intel ProSet ONLY works with Intel WLan card and the Atheros Wlan configuration tool can be used ONLY if your have an Atheros Wlan card.

  You have Realtek so use windows own zero configuration WLan!