Satellite Pro L40 - how to enable the WLan using ConfigFree

Can you help me?

My English is bad I do not end.

The question is:
My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

Help please!
I want to know what's wrong

Thank you!!

Hello!

Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
Her check first because otherwise, you can get the WLAN to work.

In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
Check it!

After this Free Config should find your WLAN router if you are in the range of that.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite Pro A100 - how to get the Wlan connection works

    Help!

    I'm a total beginner, and my problem is I can get a connection without wire only when I'm really close to my BT hub.
    My son has a laptop and gets a good connection anywhere in the House and even outside.

    He thinks I have a dodgy wireless adapter, this could be the problem?
    Can I fix it myself?

    Maybe download a new driver?
    Any suggestions would be much apreciated.

    TOSHIBA SATELLITE PRO A100

    Hello

    Your ad is not really useful.
    I mean that there is no detail about your problem
    You should first check if the laptop supports the wireless network card.
    This can be done in the Device Manager.

    Usually the WLan card must appear in Manager devices-> network adapters.
    If it s are not it is that the WLan card is not built in or the driver WLan is not installed. If the WLan driver is not installed then you should see yellow exclamation (or unknown device).

    But if the wireless network adapter is listed correctly then you should check if the WLan notebooks have been enabled. In order to activate the WLan you have to press FN + F8 and you put the switch on IT until the small LED flash.

    Finally, to configure the WiFi connection (right name WLan, encryption settings, etc...)

  • Satellite 3000-514: how to enable the WLan Intel 2200BG material button

    Hello.

    I have a Toshiba Satellite 3000 514 and a WLan Mini - PCI Intel Centrino card. (Provided? � ? ® PRO/Wireless 2200BG) running win - XP and Ubuntu.

    Is there a solution to work around the problem, the wlan software wants to push me a hardware button to turn on wireless lan, that my laptop is enough?

    In a German forum, that someone talked to solve the problem by using the 'easy', a program I already downloaded from Toshiba.
    But you can only choose the .exe files to be connected to a button. Is there a .exe file to make the software think that I pushed that no wlan-hardwarebutton existion?

    * sigh * Help!

    Thanks in advance. Sorry for my bad English.

    GMC

    delicate sounds. I have no software solution for you, but I have another solution for you.

    Since you're a German guy, you can check/read this:
    _ ttp://CGI.eBay.de/54Mbit-Atheros-802-11g-b-G-Wi-Fi-WLAN-Mini-PCI-Karte-RG
    W0QQitemZ250170200040QQihZ015QQcategoryZ79551QQssP ageNameZWDVWQQrdZ1QQcmdZViewItem]

    It s a card atheros as I have in my Tecra 9100. So, I had a lot of problems with the card intel since they require a full work centrino
    platform to work and so most of these cards are 'material' switch (in your case a button) to work.

    With the card atheros Don t you have these problems with switch/button since they work at all times without the need for switches or buttons.
    The downside is that you can't turn off the map for energy saving purposes.

    So I hope that I could help you. Would appreciate some comments. :)

    Nice weekend.

    Welcome them

  • Satellite L500-13W: how to enable the Wlan with Win 7 - shortcut keys do not work

    Hello

    I recently acquired this laptop and I installed win7 64-bit teacher. The first problem was that the wireless card has not been installed, but I go to the Toshiba website and download the new one, next to this i can not activate the map with the fn + f8 key, it's the only way to activate the card.

    I already downloaded some drivers and utilities and I can not activate the card, the shortcut key does not work and there is not another switch, software does not work either

    Any help will be welcome
    Thank you

    Hello

    Hmm. Win 7 drivers are not yet out, but I found some beta readers on the Toshiba page we:
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Maybe you will find some Win 7 drivers for series L500/505

    Otherwise I would recommend you to check if you can activate the WLan in Device Manager-> properties-> Advanced tab Wlan card

    There are a few additional options, that maybe the WiFi we / off would be there also.

  • Satellite Pro M70 - how to enable the touchpad mouse by using the keyboard?

    I have somehow lost the connection to the touchpad mouse. How can I activate it again by using the keyboard (I don't have an external mouse)?

    Asia; (o)

    Hello!

    You can enable or disable the touchpad with FN + F9.
    Check it!

    But normally, you can also find this information in your user manual.

    Good bye

  • Satellite Pro L40 - how to recover the system?

    Hello world

    My wife has a virus on his laptop computer. I think that it is the antivirus 2010. I can't access all the programs, and the recovery disk reads or that the virus has stopped working also the cd player. How can I re format the hard drive?

    Thanks in advance

    Rab

    Hi rab75,

    How have you used the Toshiba Recovery disk?
    I doubt that the virus has stopped working CD player. Maybe in Windows but if you use the Toshiba Recovery disk you will need to boot from the disc.

    So I put the disk in the CD/DVD drive and boot from this drive. Some files are loaded and you get the recovery disk screen where you can start this procedure. You must follow the instructions on the screen and a few clicks are needed to complete the installation of recovery. :)

    Check it!

  • Portege 4000 - how to enable the WLan using W2k

    Hello

    I installed the driver for Lucent Wireless LAN (6.41.1.87) for this laptop that has W2K.

    However, I can't control it! I also installed a wireless keyboard shortcut, but there are no instructions on it.

    This laptop was initially W98SE top, and it's a fight to get this working.

    Any ideas?

    Hello

    The FN keys are controlled by common Modules.
    Please install common Modules to obtain the essential work of the FN.
    In addition, you need to install Wireless Hotkey

    In addition, there are two different drivers WLan for Portege W2k. Driver Wlan Cisco and Lucent Technologies Wlan driver.
    Do not forget that you are using the correct driver.

  • Satellite L500 - how to enable the WLAN?

    I replaced a hard drive of mine (L500 PSLS0A - 08 p 002) and I installed Windows7 64 bit on it.
    I used to market its WIFI by pressing the FN + F8 keys.
    But now I can't on it using the method.
    I downloaded its end drivers.
    In reality its all the function keys do not work.
    Please let me know how to enable the WLAN and function keys.

    Hi kim2kjy,

    You have installed Windows 7 Toshiba or normal Microsoft disk recovery disk?

    The FN keys to install Toshiba Value added Package, and Flash Cards Support utility. These two tools can be downloaded on the official page of Toshiba.

    Check this box!

  • Satellite Pro L40 - how to make a dual boot with two recovery disks

    A small question;
    How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)

    discs 1 & 2 are windows vista buisness
    discs 3 & 4 are windows xp profesional
    Disc 5 is updated the bios

    The guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
    I have
    I already have a partition, but when I boot from disks, is not has the option to select a partition

    Thanks already

    > Satellite Pro L40 - how to make a dual boot with two recovery disks?
    Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
    Ask this smart guy, how to do this. Maybe it's a useful tip.

  • Satellite Pro 4200 how to avoid the mistakes of the ACPI

    Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
    The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
    Piotr Plecke

    Hello
    in this case it would be interesting what Type of laptop it is exactly.

    You will find this model on the bottom of your laptop. There is a review of it.

    Some models have a Bios update available, others not, for example.

    Please send additional information!

    Good bye

  • Satellite Pro L40 - 15 c with Vista: WLan LED does not illuminate

    Hello

    I'm new on this.
    I have Satellite Pro L40 15 c with Vista operating system.
    Although I can access the internet via my WiFi connection, the orange LED on the front of the machine does not shine.

    He failed yesterday. All agross A a come before and all the solutions?

    Kind regards.
    Maurice.

    Maybe this helps:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=107665

    It seems she s question a Vista Atheros. Make a WLan driver and the update of Vista!

  • Satellite Pro L40 - where to get the Vista recovery disc?

    I lost my business vista recovery cd rom by wrong cd rom is broken.
    hope someone can help me,

    Hi sherin2222,

    That's no problem because you can order a new Toshiba recovery disc directly but I m not 100% sure if it is possible for the older by Satellite Pro L40. Just check out the recovery shop:
    https://backupmedia.Toshiba.EU/landing.aspx

    If you can t find, ask the ASP in your country. Guys can order such a disc.

  • Satellite Pro L300: How to get the sleep settings

    Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.

    But now, he's just on stand by.
    How can I get this back to how it was (having to press the button to exit stnd - in)-help!

    I tried to turn off Toshiba power saver and using the windows settings but nothing
    I have treid working :(

    Can anyone help?

    I get at the end of my home with this computer laptop blinkin :(

  • Satellite Pro L40 - after I start the update of the BIOS, nothing happens

    I'm trying to update my BIOS version 2.00 - WIN for Satellite Pro L40 PSL4BE.
    My OS is Vista 64 bit.

    I downloaded the file and run the .exe but nothing happens.

    I also tried to copy the files on a diskette and start with a floppy disk, however, I get an error message saying to remove the diskette in the drive on startup. Any help please?

    First update the BIOS for Satellite Pro L40 is based on Windows it of possible to update in DOS mode.

    Also, I checked the Web from Toshiba site and I can only find a BIOS for Windows XP and Windows Vista 32-bit.
    It seems that the update of the BIOS is not supported for Vista 64-bit.

    If you want to update, you need to change to 32 bit Vista or XP. Then you can update the BIOS.
    Don t forget this version 2.00 - WIN is for Vista 32 bit and 5.50 - WIN XP.

  • Satellite Pro A200 - how to activate the new device LAN card?

    Hello.

    I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

    The laptop is running Windows 7 64 bit

    Kind regards.

    Hi evo8.

    What card WLAN have you had before and do the work of a former?
    I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

    By the way: do other FN keys FN + F8 work or simply not?

Maybe you are looking for